Number of records are different in database table and select statement

Hi All,
i need to fetch data from table BSID for the customer 0010000145
if i am writing the code like -
    SELECT bukrs kunnr umskz shkzg dmbtr zfbdt zbd1t kkber
           FROM bsid
           INTO TABLE it_bsid
           FOR ALL ENTRIES IN it_kna1
           WHERE kunnr = it_kna1-kunnr
           and bukrs = pa_bukrs.
no. of records are 130 in the internal table it_bsid
and actual records are 200
but when i am hardcoding the customer no.
i am getting the exact records
   SELECT bukrs kunnr umskz shkzg dmbtr zfbdt zbd1t kkber
          FROM bsid
          INTO TABLE it_bsid
          FOR ALL ENTRIES IN it_kna1
          WHERE bukrs = pa_bukrs
            AND kunnr = '0010000145'.
records in internal table = records in the database = 200.
how it is possible.
why the first code is not giving the correct no. of records.
please reply asap.
thanks in advance,
madhu

Madhu,
You need to use the conversion routine...before u pass KUNNUR.
CONVERSION_EXIT_ALPHA_RANGE_I
CONVERSION_EXIT_ALPHA_RANGE_O
Hope this helps..
Chandra.

Similar Messages

The type of the database table and work area (or internal table)...

Hello
I am trying to use a database and select all records from it and store them into an internal table.
My code:
Select * from xixi_dbcurrency into table gt_currency.
The error:
"The type of the database table and work area (or internal table) "GT_CURRENCY" are not Unicode-convertible . . . . . . . . . .     "
Any suggestions?
Thank you

Hi Thomas,
Thank you for your inputs above.
But as you suggested is we use INTO CORRESPONDING FIELDS OF TABLE then it resolve the error.
But I have below piece of code:
DATA:    it_new_source TYPE STANDARD TABLE OF _ty_s_sc_1,
              wa_source TYPE _ty_s_sc_1,
              wa_new_source TYPE _ty_s_sc_1,
              ls_target_key TYPE t_target_key.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_new_source
       FROM /bic/afao06pa100
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
       and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
But since this is reading into corresponding fields of table the data load from one DSO to other DOS is running for long more that 15 hours and still not getting completed and giving dump.
So if I switch the search to below:
SELECT * FROM /bic/afao06pa100
   INTO TABLE it_new_source
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
       and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
Then I am getting below error:E:The type of the database table and work area (or internal table) "IT_NEW_SOURCE" are not Unicode convertible.
Can you please advice on this, as performance need to improve in start routine code.
Thank You.

Backing Up Database Table and Records in Oracle 10g

Hi All,
I created database for my company with Oracle 10g Database Server and want to backup all my database tables and records within (i.e creating another username inside the data and transfer them) and outside (i.e transfering them in another destination outside the database server) the database. Could you please instruct me on how to achieve?
I look forward to hearing from you all.
Thank you.
Jc

Hi, use RMAN utility
do this
rman target sys/*** nocatalog
run {
allocate channel t type disk;
backup
    format '/app/oracle/backup/%d_t%t_s%s_p%p'
      (database);
   release channel t;
{code
Also read backup and recovery guide at http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/toc.htm
regards

The type of the database table and work area are not Unicode convertible

***Data declaration
TYPES : BEGIN OF t_zle_lagerplanung,
                   SEl, "stores which row user has selected
                   kdauf TYPE zle_lagerplanung-kdauf,
                   kdpos TYPE zle_lagerplanung-kdpos,
                   etenr TYPE zle_lagerplanung-etenr,
                   papiermaschine TYPE zle_lagerplanung-papiermaschine,
                   runnr TYPE zle_lagerplanung-runnr,
                   prio TYPE zle_lagerplanung-prio,
                   werk TYPE zle_lagerplanung-werk,
                   durchmesser TYPE zle_lagerplanung-durchmesser,
                   breite TYPE zle_lagerplanung-breite,
                   anzle TYPE zle_lagerplanung-anzle,
                   lgpla TYPE zle_lagerplanung-lgpla,
                   lgtyp TYPE zle_lagerplanung-lgtyp,
                   art TYPE zle_lagerplanung-art,
                   anzhoehe TYPE zle_lagerplanung-anzle,
                   fa TYPE zle_lagerplanung-fa,
END OF t_zle_lagerplanung.
DATA : it_zle_lagerplanung TYPE STANDARD TABLE OF t_zle_lagerplanung INITIAL SIZE 0,
            wa_zle_lagerplanung TYPE t_zle_lagerplanung.
Here I am getting the data in internal table by using thiis select statement.
SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
              anzle lgpla lgtyp art anzhoehe fa
FROM    zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
WHERE kdauf IN s_kdauf
AND       KDPOS IN s_kdpos
AND      werk = p_werks.
But while updating the particular field in zle_lagerplanung using this statement
UPDATE zle_lagerplanung from table it_zle_lagerplanung.
it is giving syntax error
"The type of the database table and work area (or internal table)
"IT_ZLE_LAGERPLANUNG" are not Unicode convertible. "
Could any one help me out how to resolve this problem....
Thanks in advance

Dear Shayamal,
XXX....are not Unicode convertible
This error comes while inserting or updating database and the fields are not matching between data base table and structure .
Check you fields of data base table and "zle_lagerplanung" and struture "it_zle_lagerplanung" . There fields must match.
thanks and regrds,
Anup Banerjee

FETCHING VALUES IN MULTI RECORD BLOCK FROM ANOTHER TABLE USING SELECT STATEMENT.

Hi,
I have one multi record block in which i want to fetch values
(more then one record) from another table using select statement
IN KEY NEXT ITEM.I am getting following error.
ORA-01422: exact fetch returns more than requested number of rows
Thanks in advance.

In your case I see no reason to use non-database block and to try to populate it from a trigger with a query, instead of using the default forms functionality where you can associate the block and the fields with table, create where clause using bind variables and simply use execute_query() build-in to populate the block. The power of the forms is to use their build-in functionality to interact with the database.
Also, you can base your block on a query, not on a table and you dynamically change this query using set_block_property() build-in. You can use any dynamic queries (based on different data sources) and you simply need to control the column's data type, the number of the columns and their aliases. Something like creating inline views as a block data source.
However, you can replace the explicit cursor with implicit one like
go_block('non_db_block_name');
first_record();
FOR v_tab IN (SELECT *
FROM tab
WHERE col_name = :variable)
LOOP
:non_db_block_name.field1 := v_tab.col1;
:non_db_block_name.field2 := v_tab.col2;
next_record();
END LOOP;

Extract data from database tables and download in pdf and csv

extract data from database tables and download in pdf and csv
hi how can i re-write my old form procedure in adf java. the procedure used to extract data from diffirent table and dowload the data in pdf and csv.am not downloading image, i what to extract data from diffirent tables in my database and download that data in pdf and csv. i would like to write this in java adf.i just what direction am not asking anyone to do my work this is my learning curve
the form code is
function merge_header3 return varchar2 is
begin
     return '~FACILITY DESCRIPTION~ACCOUNT NO~BRANCH CODE~BANK REF NO.~P/P/ AMOUNT~Postal Address 1~Postal Address 2~Box Postal Code~Dep. Date~Month~BANK NAME~BRANCH NAME~ACCOUNT TYPE~DESCRIPTION~OBJECTIVE DESCRIPTION';
end;
procedure download_file (i_pbat integer) is
dir varchar2(80);
file_name1 varchar2(80);
file_name2 varchar2(80);
appl_code varchar2(80);
fil1 client_text_io.file_type;
fil2 client_text_io.file_type;
dat varchar2(1000);
DATA VARCHAR2(1000);
bvspro varchar2(100);
ssch   varchar2(100);
bvspro_total number(20,2);
ssch_total   number(20,2);
grand_total number(20,2);
cnt    integer;
cursor pbat is
     select *
     from sms_payment_batches
     where id = i_pbat
cursor pay (pb_id integer) is
     select *
     from sms_payment_vw
     where pbat_id = pb_id
     order by subsidy ASC,programme,beneficiary_name
cursor cgref (low varchar2) is
     select *
     from cg_ref_codes
     where rv_domain ='SMS'
     and rv_low_value = low
success boolean;
begin
     set_application_property(cursor_style,'busy');
     appl_code := sms_global.ref_code('SMS','APP_CODE','SMS',0);
    dir       := sms_global.ref_code('SMS','PAY_DIR','c:\sms\batch_payments',0);
         success := webutil_file.create_directory(dir);
     if webutil_file.file_is_directory(dir) then
         null;
--         message ('directory exists');
    else
--                  message ('create directory ');
         success := webutil_file.create_directory(dir);
--         if success then        message ('directory exists');    end if;
    end if;
    for c_pbat in pbat loop
         file_name1 := dir ||'\' || appl_code||c_pbat.batch_number||'-'||to_char(c_pbat.batch_dt,'yyyymmdd')||'pay.txt';
         file_name2 := dir ||'\' || appl_code||c_pbat.batch_number||'-'||to_char(c_pbat.batch_dt,'yyyymmdd')||'merge.txt';
--message('create files ');
--         fil1 := client_text_io.fopen (file_name1,'W');
--         fil2 := client_text_io.fopen (file_name2,'W');
    fil1 := client_text_io.fopen (file_name1,'W','');
    fil2 := client_text_io.fopen (file_name2,'W','');
               dat :=                       'FROM ACCOUNT NUMBER'
                                                            ||'~'||'FROM ACCOUNT DESCRIPTION'
                                                            ||'~'||'MY STATEMENT DESCRIPTION'
                                                            ||'~'||'BENEFICIARY ACCOUNT NUMBER'
                                                            ||'~'||'BENEFICIARY SUB ACCOUNT NUMBER'
                                                            ||'~'||'BENEFICIARY BRANCH CODE'
                                                            ||'~'||'BENEFICIARY NAME'
                                                            ||'~'||'BENEFICIARY STATEMENT DESCRIPTION'
                                                            ||'~'||'AMOUNT';
         --     client_text_io.put_line(fil1,dat);
         bvspro:= null;
         ssch := null;
         cnt := 0;
         dat := '~'||lpad('~',16,'~');
         for c_pay in pay(c_pbat.id) loop
--message('cpay loop ' || cnt);
           if bvspro is null then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(1,c_pay.programme,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
                 ssch := c_pay.subsidy;
                 grand_total := 0;
                 bvspro_total := 0;
                 ssch_total := 0;
           end if;
           if bvspro <> c_pay.programme then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,ssch_total,dat,'~');
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,bvspro_total,dat,'~');
           dat := utility.put_field(1,'Total:' || bvspro,dat,'~');
                 client_text_io.put_line(fil2,dat);
                 dat := lpad('~',16,'~');
           client_text_io.put_line(fil2,dat);
                 dat := utility.put_field(1,c_pay.programme,dat,'~');
           client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
                 ssch := c_pay.subsidy;
                 bvspro_total := 0;
                 ssch_total := 0;
                 cnt :=0;
         end if;
           if ssch <> c_pay.subsidy then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,ssch_total,dat,'~');
                 dat := lpad('~',16,'~');
           client_text_io.put_line(fil2,dat);
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 ssch := c_pay.subsidy;
                 ssch_total := 0;
                 cnt :=0;
         end if;
        bvspro_total := bvspro_total + c_pay.amount;
        ssch_total   := ssch_total   + c_pay.amount;
              grand_total := grand_total + c_pay.amount;
        cnt := cnt +1;
--message('bfore write file 2 ' );
        client_text_io.put_line(fil2
                               ,cnt
                        ||'~'|| c_pay.beneficiary_name
                                                            ||'~'||c_pay.BENEFICIARY_ACCOUNT_NUMBER ||''
                                                            ||'~'||c_pay.BRANCH_CODE             ||''
                                                            ||'~'|| c_pay.BENEFICIARY_STATEMENT_DESC
                                                            ||'~'|| c_pay.AMOUNT
                        ||'~'|| c_pay.address_line1
                        ||'~'|| c_pay.address_line2
                                                ||'~'|| c_pay.postal_code
                                                ||'~'|| TO_CHAR(c_pay.deposit_date,'DD-Mon-YYYY')
                                                ||'~'|| c_pay.month
                                                ||'~'|| c_pay.bank
                                                ||'~'|| c_pay.bank_branch
                                                ||'~'|| c_pay.account_type
                                                ||'~'|| c_pay.subsidy
                                                ||'~'|| c_pay.programme)
              DATA :=                                  c_pay.FROM_ACCOUNT_NUMBER
                                                            ||'~'||c_pay.FROM_ACCOUNT_DESCR
                                                            ||'~'||c_pay.MY_STATEMENT_DESCR
                                                            ||'~'||c_pay.BENEFICIARY_ACCOUNT_NUMBER
                                                            ||'~'
                                                            ||'~'||c_pay.BRANCH_CODE
                                                            ||'~'||c_pay.BENEFICIARY_NAME
                                                            ||'~'||c_pay.BENEFICIARY_STATEMENT_DESC
                                                            ||'~'||c_pay.AMOUNT;
        DATA := REPLACE(DATA, ',' , ' ' );
        DATA := REPLACE(DATA, '~' , ',' );
--message (cnt ||' ' || data);
--message('bfore write file 1 ' );
              client_text_io.put_line(fil1, data);
         end loop;
--message ('end of write');
             dat := lpad('~',16,'~');
             dat := utility.put_field(6,ssch_total,dat,'~');
             dat := lpad('~',16,'~');
       dat := utility.put_field(1,'Total:' || bvspro,dat,'~');
             dat := utility.put_field(5,bvspro_total,dat,'~');
          client_text_io.put_line(fil2,dat);
          dat := lpad('~',16,'~');
       client_text_io.put_line(fil2,dat);
       dat := utility.put_field(1,'Grand Total:' ,dat,'~');
             dat := utility.put_field(5,grand_total,dat,'~');
          client_text_io.put_line(fil2,dat);
         -- close file
for i in 1..50 loop
       if substr(i,-1) = 0 then
             message ('flush ' || i);
       end if;
              client_text_io.put_line(fil1, lpad(' ',2000));
              client_text_io.put_line(fil2, lpad(' ',2000));
              client_text_io.put_line(fil1, lpad(' ',2000));
              client_text_io.put_line(fil2, lpad(' ',2000));
end loop;
         client_text_io.fclose(fil1);
         client_text_io.fclose(fil2);
    end loop;
   set_application_property(cursor_style,'default');
    exception
         when others then
              message(sqlcode ||' ' ||sqlerrm);
   end download_file;    i try this but this code onlydownload image not data from database tables
    public void downloadImage(FacesContext facesContext, OutputStream outputStream)
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
        // get an ADF attributevalue from the ADF page definitions
        AttributeBinding attr = (AttributeBinding) bindings.getControlBinding("DocumentImage");
        if (attr == null)
            return;
        // the value is a BlobDomain data type
        BlobDomain blob = (BlobDomain) attr.getInputValue();
        try
        {   // copy the data from the BlobDomain to the output stream
            IOUtils.copy(blob.getInputStream(), outputStream);
            // cloase the blob to release the recources
            blob.closeInputStream();
            // flush the output stream
            outputStream.flush();
        catch (IOException e)
            // handle errors
            e.printStackTrace();
            FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, e.getMessage(), "");
            FacesContext.getCurrentInstance().addMessage(null, msg);
        }

You should ask your forum in the ADF-forum.

How to link Azure database tables and fields to VS2012 C++ entry form

We are using Visual Studio 2012 C++ and have successfully connected to the database on Azure, but do no know how to associate the database tables and fields with the C++ application data entry forms. Can anyone help? Thanks

Hello Roxanne,
You could use Entity framework to map classes to Azure tables. Please refer http://www.codeproject.com/Articles/363040/An-Introduction-to-Entity-Framework-for-Absolute-B to
learn more. Hope this helps.
Regards,
Kumar Bijayanta

I need to know the name of the database table and the fields in that table

hi,
i need to I need to know the name of the database table and the fields in that table for the following fields of the front end .
1) incident details.
2) ownership details
3) injury type
4) % of investigation completed withen 7 days.
5) count of incident type
6) cost of workers compensation claim.
7) injury resulting from for workers compensation claim
8) investigation free text.
9) investigation contribution factors.
10) investigation root cause.
11) investigation root cause free text
12) employee risk assesment
13) protential infrigment notice issued
14) actual infrigment notice issued.
15) actual infrigment notice reference number.
16)vehicle damaged text.
18) when the incident occured.
thanks and regards,
pronoy .

Hello,
Check CCIHT* under se16 and search for relevant information
Thanks
Jayakumar

Different between database lock and sap lock

Hi All,
What is different between database lock and sap lock why sap introduced locking mechanism.
Thanks
Santosh

From a database perspective, every dialog step forms a physical and logical unit:
the database transaction.. The database lock administration can only coordinate
this type of database transaction. From an SAP point of view, however, this is
not sufficient, because SAP transactions, which are formed from a sequence of
logically related work steps that are consistent in business terms, are generally
made up of several dialog steps. SAP systems need to have their own lock
management. This is implemented using the enqueue work process. This also
ensures that the platform-independence of the lock management is maintained.

Sp L records are coming to the PSA and not updating in the data target

Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?

Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps...

Mutating table and row state - this was unexpected

So, I learned in a class about 3 years ago to expect the following
SQL> create table p (pk number primary key);
Table created.
SQL> create table c (fk number references p(pk));
Table created.
SQL> create or replace trigger t_insrt
2 before insert on p
3 for each row
4 begin
5   insert into c values (:new.pk);
6 end;
7 /
Trigger created.
SQL> insert into p values (1);
insert into p values (1)
ERROR at line 1:
ORA-02291: integrity constraint (FORBESC.SYS_C00169150) violated - parent key
not found
ORA-06512: at "FORBESC.T_INSRT", line 2
ORA-04088: error during execution of trigger 'FORBESC.T_INSRT'and so it led me to think that replicating ON MODIFY PARENT - MODIFY CHILD functionality wouldn't work in a BEFORE ROW trigger, but it does
SQL> drop trigger t_insrt;
Trigger dropped.
SQL> create or replace trigger p_updt
2 before update on p
3 for each row
4 begin
5   update c
6   set fk = :new.pk
7   where fk = :old.pk;
8 end;
9 /
Trigger created.
SQL> insert into p values (1);
1 row created.
SQL> insert into c values (1);
1 row created.
SQL> select * from c;
        FK
         1
SQL> update p
2 set pk = 2
3 where pk = 1;
1 row updated.
SQL> select * from c;
        FK
         2Why would the first scenario fail while the second succeeds? The update seems prone to a parent record also not existing, at least not by the BEFORE ROW trigger.
---=Chuck

< mutating table and row state >
BTW, you don't seem to have run into the mutating table error though 2 other threads today are also about it. You have a constraint violation, a different thing entirely.
I believe the second scenario works because you're neatly avoiding the error of the first. The error "ORA-02291: integrity constraint (FORBESC.SYS_C00169150) violated" means that on insert Oracle is looking up the value you're trying to insert, not finding it, and raising an error. With the before trigger you are taking the assigned value from the insert, updating the parent to it, so that on actual insert when the check happens the value is there due to the update.
I'm not convinced this is a good idea because any on-the-fly approach to data entry needs to be examined carefully.

Using plsql tables in select statement of report query

Hi
Anyone have experience to use plsql table to select statement to create a report. In otherwords, How to run report using flat file (xx.txt) information like 10 records in flat files and use this 10 records to the report and run pdf files.
thanks in advance
suresh

hi,
u can use the utl_file package to do that using a ref cursor query in the data model and u can have this code to read data from a flat file
declare
ur_file utl_file.file_type;
my_result varchar2(250);
begin
ur_file := UTL_FILE.FOPEN ('&directory', '&filename', 'r') ;
utl_file.get_line(ur_file, my_result);
dbms_output.put_line(my_result);
utl_file.fclose(ur_file);
end;
make sure u have an entry in ur init.ora saying that your
utl_file_dir = '\your directory where ur files reside'
cheers!
[email protected]

Number of records in Delta Queue in table level.

Hi All,
I want to know the number of records in Delta Queue for a particular database in Table level. Right now in Production, i dont have access to TCODE RSA7. I just trying to check the Table TRFCQOUT but i am unable to see the exact count of records specific to data source. Can you please provide any other table to see the data and the count of records in delta queue specific to each data source.
Thanks.

Hi Jalina,
Check the follwing tables:
-ARFCDATA
-TRFCQOUT
-ARFCSTATE
In case you can't find what you need in the above tables. You can always ask a temporary access to RSA7 transcation to your basis team or ask them to give you the required information from RSA7 themseleves (of course provide to them a step by step procedure) .
Hope it helps.
Amine

Last or oldest record in a oracle database table

I want to fetch oldest record in database table based on llast updated date ; I tried following queries..it gave me different results
SELECT EVENT_ID, RETENTION_TS
FROM ( SELECT EVENT_ID, RETENTION_TS, RANK() OVER (ORDER BY RETENTION_TS) RETENTION_TS_RANK
FROM EVENT )
WHERE RETENTION_TS_RANK <= 1;
select * from EVENT where rowid=(select min(rowid) from EVENT);
SELECT *
FROM (select * from EVENT ORDER BY RETENTION_TS) EVENT2
WHERE rownum <= 1
ORDER BY rownum DESC;
Above query takes like 10 to 20 mins to return me the record.
Thanks in advance..

feritz wrote:
I want to fetch oldest record in database table based on llast updated date ; I tried following queries..it gave me different results
SELECT EVENT_ID, RETENTION_TS
FROM ( SELECT EVENT_ID, RETENTION_TS, RANK() OVER (ORDER BY RETENTION_TS) RETENTION_TS_RANK
FROM EVENT )
WHERE RETENTION_TS_RANK <= 1;
select * from EVENT where rowid=(select min(rowid) from EVENT);
THAT surely won't give a correct result. Rowid is the address of the row ... it has nothing to do with the age of the row.
What is the datatype of RETENTION_TS?
SELECT *
FROM (select * from EVENT ORDER BY RETENTION_TS) EVENT2
WHERE rownum <= 1
ORDER BY rownum DESC;
Above query takes like 10 to 20 mins to return me the record.
Thanks in advance..See "how can I improve he performance of my query" in the FAQ at https://forums.oracle.com/forums/ann.jspa?annID=1535

Hi friends, I have a doubt in inserting a field to database table and inserting the same values in two different tables

I have a mpp screen for a cd library management system (we are practicing on it).
We have a main screen where a user should enter the enteries and while clicking a add button it should be inserted in a table, Here the problem rises the table name are ztransaction and zstatus.The fields in mpp are cdid,customerid,transaction id,date of issue and duedate.Now after entering all the values on clicking add button it should be inserted to database table ztransaction and the field cdid alone should be inserted both in ztransaction and zstatus.
Thank you

Hi Raghuram R G,
Check for Primary key and foreign key in the Database table??? Because of this it was not inserting...check and confirm??
Regds,
Vijay SR

Number of records are different in database table and select statement

Similar Messages

Maybe you are looking for