Allowing special characters in bw

Hello Friendz,
I have loaded transaction data in psa and infocube.
For some values in R/3 its showing following error.
<b>Value '0000cj1000 ' (Hex ' ') of char. 0REF_DOC_NO contains unauthorized characters.</b>
I tried to solve this using rskc,but still i didn't get the solution.
How can i get rid of this?
Plz,help me for this,its really urgent.

Hi,
Make sure that Lower case letters are allowed for this infoobject. You can make it allow by selecting ckeck box of 'lower case letters' in Infoobject maintainance of 0REF_DOC_NO .
Other wise .
Convert value to upper case in transfer rule.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Similar Messages

C# PreviewKeyDown Event - Allow Special Characters

Hello,
I have a textbox and a PreviewKeyDown Event in which i want to allow Special Characters,A-Z and 0-9 only. Other keys such as keyboard modifiers, F1-F12, Esc,Tab, etc are not allowed.
private void PART_SearchText_PreviewKeyDown(object sender, KeyEventArgs e)
TextBox searchTextBox = sender as TextBox;
if (((e.Key >= Key.A && e.Key <= Key.Z)
|| (e.Key >= Key.D0 && e.Key <= Key.D9)
|| (e.Key >= Key.NumPad0 && e.Key <= Key.NumPad9)
|| (e.Key == Key.Back || e.Key == Key.Delete))
&& (Keyboard.Modifiers != ModifierKeys.Shift)
&& (Keyboard.Modifiers != ModifierKeys.Alt)
&& (Keyboard.Modifiers != ModifierKeys.Control)
&& (Keyboard.Modifiers != ModifierKeys.Windows)
&& (searchTextBox.SelectedText.Length > 0 && searchTextBox.Text.Length > 0)
&& (searchTextBox.SelectedText.Length == searchTextBox.Text.Length))
if (SearchDeletionCommand != null)
searchTextBox.IsReadOnly = false;
SearchDeletionCommand.Execute(null);
The issue I am facing when hitting special characters (!,@,#...).
So on my laptop if i press Shift 1, i am eventually entering a punctuation mark (!) and that should work. But in above code what happens is that the conditions does not get satisfied.
Thanks,
Abdi

Thanks.
I was thinking to use ascii values.
private void PART_SearchText_PreviewKeyDown(object sender, KeyEventArgs e)
TextBox searchTextBox = sender as TextBox;
int ascii = KeyInterop.VirtualKeyFromKey(e.Key);
if (ascii >= 32 && ascii <= 127 && (searchTextBox.SelectedText.Length > 0 && searchTextBox.Text.Length > 0)
&& (searchTextBox.SelectedText.Length == searchTextBox.Text.Length))
if (SearchDeletionCommand != null)
searchTextBox.IsReadOnly = false;
SearchDeletionCommand.Execute(null);
I am using int ascii = KeyInterop.VirtualKeyFromKey(e.Key); to get the ascii value but it does not give me the correct ascii values. For eg.. ascii value for comma is generally 88 but over here it gives me 148 or something. And that is when my
logic above fails.
Is there any workaround for this?
Thanks,
Abdi

Not allowed Special characters

Hi Gurus,
iam getting an error while activating the DSO request
The error is
u201CValue 'E Byron Car Realignment' (hex. '450020004200790072006F006E002000430061007200200052') of characteristic ZCOITEMTX contains invalid charactersu201D
I donu2019t understand what invalid character it is containing
Apart from this I am getting error for the special character u201C|u201D
How to use both the special characters at RSKC
Please suggest
Thank you

Hi,
According to me ZCOITEMTX is not allowing lower case. you can check for this infoobject in RSD1, at General tab Lowercase Letter check box is check or not?
this will solve your issue.
regards,

Create / Alter user doesn't allow special characters in password

When i try to change the password from say : vos1s05 to : vos1s05! i get the error message (missing or invalid option), i have used several special characters and all give the same error, is there a way to circumvent this, or will this be enabled in a new release ??

A password is classified as an oracle identifier and must conform to the rules for indentifiers. To include special characters you need to enclose it in double quotes e.g. "vos1s05!"

Allowing Special Characters in email subject

Hi All,
This is my first post..Here is my scenario..I have an application whereby i can send emails..I tried sending anemail with special character in subject but the recipient had a different character when received..So i changed the encoding type of message to UTF-8 and it worked perfectly..But it didnt support for all the special characters.
Is there any way by which i can send any special character in emails without any problem..This is an urgent requirement
Thanks in Advance

aajan_1127 wrote:
Thanks for the reply..
I have a text box in jsp where by the user can enter values for the suject..So in servlet, the values enterd in text box will be the subject of the corresponding email.. ANd also am not using any unicode..the subject comes as a string and then i encode the values..You might want to brush up on what strings are and what unicode means. Inside Java strings are unicode. But if you are sending/receiving the data in unicode through the JSP / servlet depends on the encoding set on the JSP page. If you are not receiving unicode data, you are already missing those 'special' characters before even sending the email.

[HELP] Incoming SMS problem with special characters

Hello,
I have my BlackBerry Q10 for 4 days and I'm geting used to it and I love it but that's not the case...
I live in Latvia and we use special letters in our language input like
"ā č ē ž ļ ņ š ī ķ ģ ū" and that's alright with me, I know that I can't send these letters with my blackberry!
But everytime my girlfriend sends me messages that are larger than two sentences and with these special letters... then I just can't read them at all. It looks like this:
As you can see in image 1 & 2 there are @ symbols between every letter and other symbols.
In the second image there you can see that the first sentence is taken from the same sms which is in image 1, it's just separated, It would be annoying to separate every single message someone sends me!!!!
And in this image 3 below, you can see the correct text which is shown in image 2 with @ symbols between the letters...
Please, I would appreciate it if someone could help me with this problem, it's annoying!
P.S. And yes I have "Allow Special Characters" turned from OFF to ON in Text Messages>Settings>Advanced and it DIDN'T HELPED!
Don't know what else to do!!!

Ok, solved:
From, DW do Edit | Preferences | New Document and set the Default Encoding to
whatever you wish it to be. That will set the default for all new
documents in Dreamweaver.
For the existing pages, you will need to open them and do Modify | Page Properties | Title/Encoding to set the encoding as you desire.

Seeburger passing special characters

Hi
does anyone know the parameter to be set to allow special characters to be processed in BIC mapping designer
Thanks
Pratichi Chauhan

Hi,
Special character like what?
Regards
Ivan

How to you enforce special characters under Authentication in the CMC?

Is there a way to to enfoce special characters in the password for user authentication? I do know BO XI R2 SP3 does allow special characters, but I would like to notify users when they get prompt to change their password.

Margaret,
Using the CMC, navigate to the entry entitled "Authentication", next choose the tab "Enterprise".
There are two key options (they appear towards the top), and here is a brief explanation of these:
When you enable the enforce mixed-case passwords option, then it ensures that passwords contain at least two of the following character classes: upper case letters, lower case letters, numbers, or punctuation.
The second option, must contain at least (N) characters stipulates the minimum length that a user can choose for his or her password.
From a practical point of view, I would say that if you have the first option taken (enforce mixed-case), then your next option should be set at no lower than 8.
As far as educating the user, this is done externally from the web page when it presents to the user (the user gets three prompts: old password, new password, and re-type new password). As far as a clue to using at least two of the upper/lower/number/punctuation in their password, I don't know how you communicate that other than an internally circulated "Introduction to Our System" handout and you include this tidbit amongst other details you'd like your users to know, etc, etc.
Thanks,
John

XML Gateway - Hub Definition Password - Special Characters

Our Marketplace provider is about implement mandatory special characters in the hub access user accounts. Our current configuration does not allow special characters in the hub definition.
It there anyway to enter any symbol in the XML Gateway>Hub Definition>Password field.
1) Are there any symbols that are not deemed "Special Characters", I have tried various without success.
2) Can the password type be changes to allow symbols?
Any help welcomed,
Simon
Swansea
UK

Actually this is the right forum to be in
There are a few steps you need to do to configure BPEL with XML Gateway. This is what you did in 11i, may have changed for R12
Here are the steps to setup BPEL output
1. Choose responsibility 'XML Gateway' from left panel.
2. From right panel choose 'Define Lookup Values' . Oracle forms application would open up.
3. On XML Gateway Lookups form , press F11.
4. In 'Type' field enter 'COMM_METHOD'(without quotes.
5. Press CTRL+F11 . Form would fill from already present look ups. We are going to create new Lookup Value.
6. On new row create look up as (Values without quotes) :
- Code = 'BPEL'
- Meaning = 'BPEL'
- Description = 'Used for Apps Adapter Integration using BPEL'
- Check 'Enabled' checkbox.
7. Save form from File--> Save from menu bar. you can close this form.
8. XML Gateway Navigator form would be presented.
9. From right panel choose 'Define Trading Partners' .
10. On Trading Partner Setup form , press F11 .
11. In field 'Trading Partner Type' enter 'Supplier (without quotes).
12. In field 'Trading Partner Name' enter ‘VENDOR-1' (without quotes).
13. Go to Trading partner details and create new transaction as (Values without quotes)
- Connection/Hub = 'DIRECT'
- Protocol Type = 'BPEL'
- Protocol Address = 'http://appsadapter.sample.com'
cheers
James

SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name

Hi,
I have created a web service in SAP ECC from a RFC.
While configuring the web service in SOA management to publish it, getting error SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name
How to resolve the same.
Thanks
Tanmay

Hello Tanmay,
Are you including quotes (') in the name, I assume not?
Regards,
Siddhesh

CONSTRAINT rule of no special characters allowed? Help

ALTER TABLE dbo.tblasset ADD CONSTRAINT
CK_tblasset_HardwareNumber CHECK ([HardwareNumber]<>'' and [HardwareNumber] is not null)
GO
Is there away I can implement special characters being inputted on a NVARCHAR datatype using this?special characters like (* , . ,")Many thanks

ALTER TABLE dbo.tblasset ADD CONSTRAINT
CK_tblasset_HardwareNumber CHECK ([HardwareNumber]<>'' and [HardwareNumber] is not null)
GO
Is there away I can implement special characters being inputted on a NVARCHAR datatype using this?special characters like (* , . ,")Many thanks
Your can create a Check
Constraint on this column and only allow Numbersand Alphabets to
be inserted in this column, see below:
Check Constraint to only Allow Numbers & Alphabets
ALTER TABLE Table_Name
ADD CONSTRAINT ck_No_Special_Characters
CHECK (Column_Name NOT LIKE '%[^A-Z0-9]%')
Check Constraint to only Allow Numbers
ALTER TABLE Table_Name
ADD CONSTRAINT ck_Only_Numbers
CHECK (Column_Name NOT LIKE '%[^0-9]%')
Check Constraint to only Allow Alphabets
ALTER TABLE Table_Name
ADD CONSTRAINT ck_Only_Alphabets
CHECK (Column_Name NOT LIKE '%[^A-Z]%')
Source: http://stackoverflow.com/questions/25408483/create-rule-to-restrict-special-characters-in-table-in-sql-server
web: www.ronnierahman.com

Special Characters and spaces in Tablenames and Column Names are allowed ?

Hi
I have created two tables in Oracle10g
as follows
SQL> create table test(columna number,columnb varchar2(20),primary key(columna));
Table created.
SQL> insert into test values(1,'test');
1 row created.
SQL> commit;
COMMIT är utfört.
SQL> create table "test quote"("#" number,abc number,primary key("#"));
Table created.
SQL> insert into "test quote" values(1,2);
1 row created.
SQL> commit;
COMMIT är utfört.
SQL> select * from "test quote";
# ABC
1 2
SQL> select * from test;
COLUMNA COLUMNB
1 test
Now I want to cache the tables and their data into TimesTen
The cache group for table test which is not having any spaces and special characters in table name and column names is created perfectly.
But when I create the cache group for table "test quote" which is having special characters and spaces it gives error :
Command>create readonly cache group w2 from testuser.test(columna number,columnb varchar2(20),primary key(columna));
Command>select * from test;
<1,test>
1 row found.
Command>create readonly cache group w3 from testuser."test quote"("#" number,abc number,primary key("#"));
5140: Could not find TESTUSER.TEST QUOTE in Oracle. May not have privileges.
Command Failed.
Now there is contradiction that why cache group for table test is created successfully and why it is not being created for table "test quote".
What I think is if special characters and spaces in column names and table names are possible in Oracle then it sould be possible in TimesTen.
Any possible solution.
Looking forward for your reply.
Please help I am stuck badly.
/Ahmad

Hi
Problem Solved ....... Remeber only Capital letters work with special characters ......
/Ahmad

I have a Flash Sample to rotate images and text but I not find a way to display special characters

Hello everyone.
I bought a very nice Flash application that rotate images, and text of any color and size. It use an XML input file.
I've posted here, a complete copy, so any of you can download, view and use it freely.
I would appreciate if any of you know how to do, so that the text displayed, including the characters I use in my language (Spanish), such as á, é, í, ó, ú, ñ, and other special characters.
In fact, I could not find a way to do it, because I'm not expert Flash, and less in ActionScript.
If any of you would help me on that, I thank you implement the appropriate adjustments and compressed into a. zip file, and let me know where to download it, or if you prefer you can send it to my email: [email protected]
After all compressed in .zip format is a very small file: 430K.
Click here to download the complete sample.
Thanks.
=====================================
Translated using http://translate.google.es
=====================================

Hello Rinus,
If I understood your last post correctly, then problem 2 is resolved, right?
Regarding problem 3:
I'm not asking you to share exact VIs.
I just want to see a very simple VI that explains the concept of what you're trying to do, what should happen (this can be in words that refer to the front panel elements) and what you've tried.
The terminology you're using isn't clear to me without an extra explanation.
This could even be only a Front Panel with a few buttons on where you just describe what should happen with specific controls/indicators.
Based on the first post it is not clear to me what you mean with:
- A "button element":
Are you talking about a control, an indicator, a cluster that contains multiple control?
- The structure:
Is this an event structure, case structure, for loop, ...?
Is it seems like you want to programmatically control Front Panel objects, which on itself is no problem at all independent of how many objects you want to control.
Please share with me simple example of what goes wrong and explain which things should happen on that specific Front Panel.
This will allow me to help you and also allow me to guide you along the right path.
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

How to add special characters in Flash CS3

Hi, i need the help of some flash guru… these last weeks we were working with cloversites.com to build a community website… the interface is awesome etc etc however we in Malta have eight special characters (GCZ with a dot on top of them and an H with a second strikethrough). Those at cloversites wrestled with the problem, they could see the characters on their computers but when they entered the text in the site, flash couldn't render the special characters. Here is their message:
I am extremely sorry about this, but we were unable to add in your characters. We attempted to add them into our software but they did not work. We worked on it all morning and realized that we need an extra add-on for our keyboards. Adding special characters is nothing new to us and have answered this request for many of our international users. For some reason, the Maltese characters did not work in our sites. For example, our "option-G" is the copyright symbol so it will need to be transferred over to international characters.
Unfortunately, we thing that this has to do with Adobe Flash CS3. The software allowed me to embed the characters, but we were unable to render them on the web. Which led us to think it had to do with the version Adobe is running and its inability to render the text through its software on the web. None of the characters worked on the web, and it looks like its just an Adobe bug. So we are able to type and use the Maltese characters, but Adobe Flash is having trouble with them.
Does anybody know of any possible solution?

see if codepoints-to-string() is suitable for you ..
Re: how to concatenate hexadecimal value to string in XQuery in PS Message Flow

How to Avoid Special Characters in string

Hai.
I want only Alphabets & Digits to be entered in to my string.No any other special characters except spaces.How can I do this?
Solved!
Go to Solution.

MikeS81 wrote:
see the attached example.
I would allow a few more, e.g. 0 and 8 to allow editing of the entered string (backspace, cursor buttons, delete key, etc.).
Message Edited by altenbach on 11-21-2008 12:49 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
check_char_LV80MOD.vi ‏14 KB
FilterStringInput.gif ‏6 KB

Allowing special characters in bw

Similar Messages

Maybe you are looking for