Subcontracting Check Box in Maintenance Order

Hello
Help me to know if we are able to create the PR via control keys PM02 & PM03 then what the use or funcationality of subcontracting check box in maintenance order.
Regards
Kapil

Dear Abhishek,
The same error message refers to one of the following material provision indicators getting to me also:
"S" - an entry within table T417 is missing where KZBRS (A&D-Specific Material Provision) is not set
"X" - an entry within table T417 is missing where KZBLF (Rework Material from Subcontractor) is not set
"F" - an entry within table T417 is missing where field ADSUB_DEFDLV (Deferred Delivery) is not set
also, i Insert a row with S and keep MPCust and MPVend blank and Check the A&D MP box
getting following error "
Op. 0010 must have exactly one component as 'Rework Material to Subcontr.'"
Can u tell me the config for MPI??

Similar Messages

Check box to Work Order to identify that they were generated from PM,Ins,Pr

Hello,
Would it be possible to add a check box to Work Order to identify that they were generated from PM, inspection or Predictive Maintenance?
How can we configure this and how can we set up to report on this.
Thanks.

There are many option to identify that order was from PM (which is planned) & corrective work orders.
Set up order types & train user to use specific order types when they build maintenance plan / Item to create work order.
Configure order type 'Define Default Value for Planning Indicator for Each Order Type' so that system knows what is planned & unplanned.
SAP note for the config:
(Define Default Value for Planning Indicator for Each Order T
In this section, you can define a default value for each order type for the order planning indicator.
The order planning indicator is used for selection and statistical analyses in the Plant Maintenance and Customer Service Information System.
Three order planning indicators are predefined by SAP:
Planned order. You should use this indicator for order types, for which tasks can be anticipated.
Unplanned order. You should use this indicator for order types, for which the task cannot be anticipated, but also need not be performed immediately.
Immediate order. You should use this indicator for order types, for which the necessity of the task cannot be anticipated, but where the task must be performed immediately.)
Hope this is helpful.
Ravi

Item Partners Check box in Sales Order

Hi all,
What is the functionality and configuration settings of Item Partners Check box in sales order, partner function tab line item level?
When i find the check box marking then it allows me changes by double clicking of the partner and changing the address, but when the same check box is not marked then it is in dispaly mode when i double click it.
So please suggest me how to control its features.
Thanks in Advance,
Cheers,
Anil.

Hello,
If this indicator is activated, the partner is validated at item level.
It may happen that in a business transaction the partner in the document header does not apply to all items, for example, if specific goods for a customer are normally delivered to another ship-to party.
In sales documents and billing documents you can enter one of the deviating partners from the document header at item level.
When creating a document , the system copies the document header partners to the items. If you want to define another partner than the one in the document header at item level, overwrite the proposal from the item partner screen.
Prase

Allowing user to click check boxes in any order

Hi,
I'm using Captivate 5.5 to create a training session with our software. On a particular page, our trainer wants me to instruct the user to click every check box on a page. Since there are 10 check boxes, I would like to let the user click all the check boxes in any order, as opposed to clicking them in the same order that I did using the normal training recording.
I've been trying to insert click boxes and assign variables, but then I run into the problem of not being able to show the checkmark when the check box is clicked.
Has anyone run into this problem or tried to created a page where the user can click multiple object in no particular order?
Thanks!

Hello,
This is perfectly possible with the checkboxes widget, and will be a lot less work than messing with images and click boxes. The big advantage of the checkboxes widget is that it is static, so you do not need to worry about rewinding the playhead which would be the case if you are working with interactive objects. However if you want to offer a 'reset' to the user, or perhaps to return to the slide with the widget, I warmly recommend to download the free enhanced checkboxes widget created by Jim Leichliter, because it allows you to control the variables associated with the widget.
I will not explain extensively how to use it, bit in a hurry because I have to teach in a couple of minutes. But here are some links: first a link to Jim's widget, than to a blog post where I explain the use of the Default Checkboxes widget, and third the explanation of the enhanced version.
Checkboxes Enhanced
Widgets and Custom Questions - part 1
Extended widgets ...
Just one last warning: I did not check the maximum checkboxes supported by the widget (you need 10), if necessary however you can insert the widget twice. However never duplicate a widget, nor have them in the same space on the stage.
Lilybiri

How to check, when the Maintenance Order was deleted

Hello Experts,
Can you please tell me of how to check for the maintenance order that when it was deleted and who has deleted that.
If any T-Code is there or at the Table level also to check the requirement.
Regards,
Yawar Khan

If you want to track when you have put deletion flag, you can track it using above mentioned techniques.
If you archived (deleted) permanently, then using archival history only, you can check I guess.
Check these links. While deleting maintenance order, we can hisorical order with same number. Using that creation date, you can track.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e6552462a11d189000000e8323d3a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e4d2f462a11d189000000e8323d3a/frameset.htm

Return Item and Free goods check box in purchase order

Hi Guru:
I just got the question regarding the return item and free goods check box,my question is that if I check the free good check box,then the price of the matieral will be charged to zero,however,if I want to issue the return purchase order to the vendor,does I need to check the return box first and then issue the return order to the vendor? Then go to MIGO transaction to select the movement type 122 to return the goods,what's the whole precedure for returning the goods to the vendor,can anybody tell me,very appriated!

Hi,
Retun to vendor through have two types....
One is you have Po created, vendor send the item in that few items have rejected so you need to return the item to vendor......
here in MIGo chose returrn to vendor selce the PO numbere.... system automaticaly take the movent type 122....
sencond type is Retun PO..... In Po while creting the PO tick the return indication..
If you do the GR system will pick 161mopvent type.. ( GR returns)...
REgards
anand

"S" check box in sales order

Hi:
When I am entering the material in the item of sales order,the S check box(beside order quantity column) automatically checked,and there is no delivery data/material available data/loading data popped up in the line item,but the mrp setting of the material looks good,what's happening?

Dear Allen,
The 'S' check box is marked in following two cases:
1. If there are more than 1 Schedule Lines for the item
2. If the Confirmed quantity is less than Order Quantity.
As in your case there is no Delivery data in Lilne Item, it means the entire Quantity is not Confirmed. Kindly check whether there are adequate stock in the system & MRP settings.
Hope this helps. .
Thanks,
Jignesh Mehta.

How to activate the Check box in Purchase Order after Goods Receipt

Hi All,
How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
Where t make the settings in SPRO.
Regards,
Shailendra Hadkar

Hi
SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
Then activate the auto PO creation in Vendor master - Purchasing view
Check it out.
Regards,
raman

Print Out of Check List In Maintenance Order.

Hi All
I just added one checklist to the Long Text in the tasklist of an equipment.
In the checklist there are some tabular cloumns, lines, square box, etc...
But when i take a print out of the checklist/Orerations from the maintenance order the tabular cloumns, lines, square box, etc...
are not shown in the print out.
Pls. Suggest some way of adding the checklist with tabular cloumns, lines, square box, etc...
Venkat

Venkat,
Long text doesn't support table formats.
You could get around it by having those fields maintained as characteristics and then generating a table while printing forms with that data using Adobe forms, smartform or sap script.
If you would still like to maintain the same in long text, it can be done by drawing vertical and horizontal lines using "|" AND "_" .Its tedious and ugly process, but you could get what you want.However the you may have to go through a iterative process to get the format right. It would be easier if there were just two columns.
Regards
Narasimhan

Error in commitment check when creating maintenance orders

I'm getting an error " Error in commitment check" when creating the maintenance order for procuring the spare parts which is an non-stock item. I checked the cost for the particular Cost center/GL there is no money in that, so thatu2019s the reason for getting the error, so when we did testing in DEVL and QA, we put money into the cost center/fund/functional area and the issue has been resolved.
Now my client said they donu2019t want that control and they want to remove the commitment check so that you can create maintenance order even though you donu2019t have money on particular cost element.
FICO person told that there is no AVC check in place, also there is no budgeting control implemented, she also told that when they create Purch requisition directly they are not getting the error even though cost is not in that particular cost element but she wonder why it is giving error when we create the purchase requisition thru Maintenance order.
I have referred the experts forum to figure out this issue, but everywhere they mentioned this is due to budgeting or funds management issue and ask me to contact FICO person to remove the control, but there is no such person as current FICO person is an end user trained in SAP.
Your help is appreciated

Hi,
We got same error , while procuring through PM order , Please help us , what settings required .., Our version is 4.7EE .
The note mentioned up to level of 4.6 ,
Regards,
Sujana

Goods Receipt check box on Purchase Order

Hi All,
I am creating a NB Purchase order (non-account assigned). Immediately on entering the Material, in the Line Item 'Delivery' tab, "Goods Receipt" is automatically checked and this option is disabled.
Does anyone know the configuration that defaults "Goods Receipt" as checked and disabled?
Thanks much,
Sheetal

Hi Sheetalnn,
You can check the field selection set up for the purchase order document. It is found in the following path:
SAP IMG -> Materials Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
Just read the accompanying documentation for you to have a better understanding of what influences the field selection for the purchase order.
As a side note, the GR requirement for the PO item is influenced by the Account Assignment Category used.
Best regards,
DeLo

GR Message Check Box in Purchase Order

Hi MM Experst,
While making Purchase Order in Header data Delivery/Invoice Tab GR Message is Checked by User1.
Same Goods Receipt is done through MIGO by User2.
But once the Goods Receipt is done there is no message is triggering to the User1.
Please give your suggestion to clear this problem.
Regards,
Prabhakaran M

HI.
Sathya
We are required this same scenario
Can u please know how to do GR message setup..
How u did it.
Regards
Sk

Unlimited delivery check box in purchase order checked automatically.

Hi
While i am creating a purchase order for certain material the unlimied delivery is enabled automatically for certaqin material group.
I n mmaterial master also this is unlimited delivery is not maintained and in the purchase value key config also not maintained.
Can you let me know is there any other config. for this yo dectivate
Thanks in Advance
Sunil

Hi
In material master you can check unlimited over delivery under Purchasing tab. Please check whether it is ticked or not.
And also in Info record, under purchasing data you can check this tab.
Thanks

Creation of subcontracting PR through maintenance order

Dear experts,
Can anyone tell me how to create the automatic subcontracting pr from the maintenance order.
my requirement is to send the defective item from the maintenance to external vendor.
how to see the subcontract check box in the maintenanc order screen. what is the settings i ve to do.
when i try to check the MPI INDICATORS, i m not able to edit .
please guide me how to get the solution that for this subcontracting external process.
i m using the control key as PM02 IN THE operation tab page.
do i ve to send that material as non valuated material ?
what are all the steps to be covered. can you guide me step by step
thanks and regards
vinoth devapriyan

Hi Vinoth,
SAP supports Sub-contracting from Maintenance Order from EHP 5. If you are using EHP 5, then you have an 'Check Box' option in the Refurbishment Order Type to define sub-contracting is allowed. Then you can send a Defective Material & get back a Repaired Material.
If you are working on a EHP that is less than 5, then you have do the sub-contracting flow seperately. Following are the steps.
Create a Sub-Contracting PR. While creating the PR, you need to define 'Recursive BOM'. Here the Parent material will be with Valuation Type 'Defective' & child Material will be with Valuation Type 'Repaired'.
Create a PO. Issue the Material (defective) from ME2O against movement type 541 to the Vendor.
Post GR with Movement Type 101.
Now the Material will get into stock against Valuation Type 'Repaired'.
Note : Do not provide 'Account Assignment' as Maintenance Order (or) Cost Center in the PO. It should be blank. Other wise the Order will be debitted twice (once when consuming the material & second when posting GR).
Hope this helps.
Regards,
Ajai

Interactive fields and check boxes don't stay in tab order

Hi everyone. I'm creating a census form for my parish which contains questions and check boxes. I've laid out the first section of this form (called Household Member 1), then gone back and added all the text fields / check boxes in the order in which I want the user to be able to tab through the form. When I open the Tab Order dialogue box to make sure the user will be able to tab through the form correctly, all the fields / check boxes are in the correct order. Now I need the exact same sections repeated... Household Member 2, Household Member 3, etc. In total, there will be 7 sections on the form that request the exact same information. So after I get the first section the way I want it, I copy and paste, or drag and duplicate the section with all it's fields onto the next page. However, when I check the Tab Order on this subsequent sections, all of my check boxes have moved to the end of the list, requiring me to have to manually move each check box back into its correct position in the section. This happens every time I duplicate the section... I have to manually put the tabs in their correct order. I tried duplicating the entire page rather than just duplicating the section, and the same thing happens. These fixes are tedious to say the least. Any thoughts about how to fix this would be appreciated.
I'm using CS6 on a Mac with OS 10.8.3

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Subcontracting Check Box in Maintenance Order

Similar Messages

Maybe you are looking for