Almost figure out the DVD Export Function, but...

Hello All,
Slowly getting there with trial and error. Got my film exported using QuickTime Movie. Not the quality I want, but it's what I've been able to figure out so far. My only real problem is the audio being over-modulated (distorting). The only thing I've done is apply normalization to the entire soundtrack. I'm still getting distortion.
Any and all help is appreciated
DG

Got my film exported using QuickTime Movie. Not the quality I want, but it's what I've been able to figure out so far.
That will be the BEST quality you are gonna get, if you exported a QT Movie, using the sequence settings and making it self contained...and NOT recompressing. That is basically a digital copy of your footage from the timeline into a single QT file. Ain't gonna get better than that.
My only real problem is the audio being over-modulated (distorting).
Do you hear this over modulation in the timeline? You should be getting EXACTLY what you have in the timeline. If you don't, if things are different, then you did something wrong.
What are the peak levels? And are your speakers cheap? Or good?
Shane

Similar Messages

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page. I can't figure out the rename function either. Help?

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page.
I do have a 2008 version of Microsoft Office installed to save money, but that shouldn't affect things. I can't figure out the "rename" function either. Help?

Oh, and I also reset my NVRAM, my computer hasn't frozen again yet, so I'm not sure if it has made a difference.

I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?

I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning? Presently after exporting and burning each photo is identified by the file name rather than each individual title description.

File name and Title are not the same thing.
Filename is attached to the Jpeg file in the Finder.
Title is attached to the photo within the Jpeg file - as is the description. These are written to the Exif and IPTC metadata on export.
So: File -> Export. Kind: Jpeg or Tiff and Check the box at 'Title and Keywords'. This will write the Title, keywords and descriptions (though not explicitly stated) to the metadata. This can then be viewed in any app that understand this material.
You can choose, if you wish, to also use the Title as a Filename - that's an option at File Name
Regards
TD

I have a new imac and am trying to transfer files from my old gateway using a flashdrive. I cannot figure out how to export from itunes to the drive.

I am trying to import my itunes library from my old gateway computer to a new imac. I cannot figure out how to export the library from the gateway computer to a flash drive to transfer.

Copy the entire /Music/iTunes folder to /Music/ on the new computer.
That is all you need to do.

My sons Ipod touch would start charging and then the screen turns white and it freezes. I am trying to figure out how to reset it, but it is not letting me.

My son's ipod touch is not charging because the screen turns white and it freezes up. Trying to reset it and figure out the problem but don't kno what to do.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I just bought a MAC and am trying to figure out the correct version

I just bought a MAC and am trying to figure out the correct version of LR4 to install on the Mac. Someone in support (LR) gave the link for the downloads, and I chose the LR4.4 (but, it said LR5---kind of confusing). I don't have a DVD drive, so I am not sure if this one will work. I have the LR icon that says Light Room 4.4 on the screen, but LR does not open when I click it.....????? How do I open this? Thanks!!!

I called my ISP to set it to Bridge mode and they said that they couldn't do that (Linksys help desk gave me instructions on the switch to Bridge mode). However, they then tried to upsell me their own wireless router for $79.99......
Can I make this change myself or do they need to do it from their end?
Thanks!

Figuring out the mp3/wav-tempo on the fly

Hi all,
I'd like to know is it possible to create a flex-application which would take a mp3- or wav-song as an input and figure out the song's tempo?
I know there are some other programs which can do this but I would need to do it inside the Flex-application because I have to add a lot of different kind of behaviours around it.
By "is it possible" I mean that are there any plugin's or ready functions etc available?

Umm, I’ve worked at Apple before the iPhone and now suddenly I am at level one?!? What happened?

My earpeice on my Iphone4 does not work. It acts as if i still have earphones plugged in. I have tried plugging in and out the earphone several times but it still has not resolved the issue. I have rebooted my phone but the problem still exits. Suggestion

Hi, I am using and Iphone 4 with OS 4.2.1, I recently started facing issues with my iphones earpeice. It acts as if the earphones are still connected. I have tried plugging in and out the earphones several times as per several posts confirming a fix for the issue, however i am still facing the problem. Please suggest..!!!!

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

I need help figuring out the best way to convert analogue video to DV so that I can edit it.

I have a large number of VHS and hi8 tapes that I want to convert to high quality DV.
I have a couple of options. One is an Elgado Video capture system.
The other is a Sony Digital Media Converter Box (DVMC-DA2).
I have tried a few of the less important tapes using the Elgado Video Capture system. It only allows you to convert to MPEG4 or H.268. It is not very good quality, especially for archival items or items I would later wish to edit.
I also have the Sony Digital Media Converter Box. I have heard that this is a superior option. So far, though, I have only been able to figure out how to import using an old version of iMovie HD. This makes a large imovie project file (approximately 6.18GB for a 28:30 clip vs a 348.9MB for an MPEG4 using delgado.
On top of that to convert the file from an iMovieProject file to DV is an additional step that so far looks like will take a half an hour at best.
Is there any way for me to import VHS/hi8 tapes using the Digital Media Converter Box to creat high quality DV files directly? If so, where can I find this info? What steps should I take and what are the settings I should use.
I have a lot of tapes so I want to figure out the right and most efficient way to do this because I will be repeating it a bunch of times and would hate to have to start over again.
I should also mention that I am using a Mid 2010 MacBook Pro, with OSX 10.9.1
I'm sorry in advance if this seems like an obvious question, but I have been googling and looking at tutorials on the site and just have not found the answer. There are a lot of ads for expensive low quality services to do this converting for you, so maybe the answer I am looking for is burried in all that advertising.
Thanks

Thanks Biggles and Gotz. I just couldint find capture, but now I can! (It was right under my nose too).
I'm trying it now and it appears to be working. Do you have any other recommendations for capturing from hi8 video source as far as setting go? I am using DV to capture. Are there any other settings I should pay attention to?
There is an extra line of video noise at the bottom, but when I google it, it sounds like it won't show on most standard tvs and if I want to fix it for online, that I should mask it after the fact vs scaling up the video.

Is there a way to dynamically figure out the FIRSTROW & LASTROW using Bulk Insert?

I noticed most of my files follow a certain convention, so I can use Bulk Insert with this:
FIRSTROW = 2, LASTROW = 224
However a few files have many more records. I'd like SQL Server to dynamically figure out the first and last rows with data, but I don't know if that's possible. Can someone confirm?
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Nope, you would need read the files from some program. Could be a CLR stored procedure if you want to do it from SQL Server. But from BULK INSERT alone, no.
Erland Sommarskog, SQL Server MVP, [email protected]

I can not take out the DVD RW disc from the drive PIONEER DVD-RW DVRTS09

I have a iMac 2010.
I can not take out the DVD RW disc from the drive PIONEER DVD-RWDVRTS09
Disk inside the computer. But there is no information about it on the desktop and server tools "Disk Utility"
What should I do?
Restart Computer literacy is already done
   Firmware revision: Q90B
   Connection: ATAPI
   Supports recording: Yes (drive supplied Apple)
   Cache: 2000 KB

Restart computer while holding down continuously on the left click button of the mouse. Continue to hold until the disk is ejected.

I Ipod class wont play TED and other video podcasts. The genious bar could not figure out the problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem.

My Ipod classic wont play TED, The Grid, Techzilla and other video podcasts (but not all video podcasts). The genious bar could not figure out the problem. Instead, the Apple store gave me credit towards a new classic, which produced the same problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem. Lastly, I tried restoring the ipod to no avail. I've heard this is a video codec problem.

See this extensive older thread on the issue.
https://discussions.apple.com/thread/2813428?start=45&tstart=0
B-rock

Help! I figured out the problem - sort of.

So I posted my problem two days ago. I found that only some of my pages were loading in Firefox 3. I didn't know why (see below for original posting).
With a little experimenting, I have found that republishing the pages that "work" actually causes them to no longer work. I'm pretty sure I published these pages that worked with previous versions of iWeb. Now that I'm using the latest version of iWeb, any new pages (blogs) cannot be viewed by Firefox 3.
Is there anyone out there with a work around? Solution? Anyone?
HERE IS THE ORIGINAL POST:
HELP- Take a look at my pages- What's wrong?
Posted: Nov 19, 2008 3:19 PM
Reply Email
Here are links to my pages: the first link doesn't load in Firefox 3. The second link loads fine. I can't figure out the difference between the two pages. Any web gurus out there that can determine my problem? I really want people using firefox to be able to view my site.
THANKS!!
LINK 1:
http://web.me.com/reeldamian/DAMIANDP.COMNYO/COMMERCIAL_REEL/COMMERCIALREEL.html
LINK 2:
http://web.me.com/reeldamian/DAMIANDP.COM_NYO/FX/FX.html
Message was edited by: 3pointer

I installed oracle apps 11.5.10.2 using steps given in thread and I didnt have any problems. I then installed it on my friends laptop and it worked fine. but recenly it stopped working in my laptop, i was not able to open login page from main url (http://www.msb.ora:8000) it gave error : page cannot be found
So i reinstalled it on fresh system again.. but since then it not working. I have tried atleast 9-10 times and everytime it ends up with same error "jsp is not responding", I am able to open the rapid install main page but I am not able to open login page. it says page cannot be found. i followed all the steps suggested by you guys in this thread to solve this error, but still have no luck.
I have tried following steps to solve the issue
1) As its recommended to installed apps on fressh os without jdk i did the same, as i didnt worked i tried installation with jdk preinstalled,
2) i have tried on both windows server 2003 and win xp professional
3) I tried to change the jdk path in jser.properties file
I will really appriciate any help to solve this problem. Below is system details:
os: windows server 2003
ram : 1gb
processor: 1.83ghz core 2 duo
Oracle apps 11.5.10.2
java version: 1.4.2_04 ( installed by rapidwiz)

IPhone SDK: API to figure out the keyboard height

Is there an API to figure out the height of the keyboard? In one of the samples it was hardcoded to 150. Since the height is not the same in potrait and landscape mode i was wondering if there was a programmatic way to do this instead of hardcoding it in my app.
Thanks.
-TRS

This changed (but isn't well documented) now.
NOW you need something like:
CGRect keyboardRect;
CGPoint keyboardBegin;
CGPoint keyboardEnd;
\[\[\[notification userInfo\] objectForKey:UIKeyboardBoundsUserInfoKey\] getValue:&keyboardRect\];
\[\[\[notification userInfo\] objectForKey:UIKeyboardCenterBeginUserInfoKey\] getValue:&keyboardBegin\];
\[\[\[notification userInfo\] objectForKey:UIKeyboardCenterEndUserInfoKey\] getValue:&keyboardEnd\];
Message was edited by: RainPacket (because formatting code on these forums is a pain. We need a documented code-block-marker!)

I have an IPad with a Restriction code that we cannot remember. Is it possible to delete and restore the IPad without the code? If not how do I figure out the code or how t? o remove it?

I have an IPad with a Restriction code that we cannot remember. Is it possible to delete and restore the IPad without the code. If not how do I figure out the code or how to remove it?

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

Almost figure out the DVD Export Function, but...

Similar Messages

Maybe you are looking for