ALSA: Setting default device (Not card, but device)

This seems to be a riddle that nobody can solve;
- The system only has one card by the name of 'Intel'
- That card is the regular 6 3.5mm jack soundcard.
- I have a mic plugged into the red microphone plug
- I open up Audacity and go to preferences, there are two microphone plugs, 'hw:0,0' and 'hw:0,2'
- I have no idea where 0,0 is and it doesnt make any sound, I plugged the mic into every plug on the board and nothing records.
- i can set Audacity to use 0,2 and then it will record my voice just fine
When I open up xfce's mixer I see that there are two mic plugs:
Apparently "Front Mic" is the device that is hw:0,0 right now/
Now when I play Savage2 I don't have an option to choose the device, I can choose the soundcard but that doesn't help. How do I set the default Device so that the game uses hw:0,2 in push-to-talk?

from the alsa archwiki:
"Setting the default Microphone/Capture Device
Some applications (Pidgin, Adobe Flash) do not provide an option to change the capture device. It becomes an issue if your microphone is on a separate device (i.e. USB webcam or microphone) than your internal sound card. To change only the default capture device, leaving the default playback device as is, you can modify your ~/.asoundrc file to include the following:
pcm.usb
type hw
card U0x46d0x81d
pcm.!default
type asym
playback.pcm
type plug
slave.pcm "dmix"
capture.pcm
type plug
slave.pcm "usb"
Replace "U0x46d0x81d" with your capture device's card name in ALSA. You can use 'arecord -L' to list all the capture devices detected by ALSA."
EDIT: maybe i didn't read your post well enough.. im just guessing here but maybe you can replace card U0x46d0x81d with
device name_of_device..
maybe..
Last edited by test1000 (2010-10-24 17:06:36)

Similar Messages

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

Midi/browser playback problem with Audigy 2 platinum (Cannot set Default Device for some reas

Currently I'm having problems playing back mid files in Mediaplayer and various other default programs. I can play midifiles in Winamp by setting it to the proper Directsound device. However in control panel/sound setup (MIDI music Playback), It only lists the MIDI Out Devices instead of the playback one and is defaulted on BLANK when I enter it. I have a feeling this is the main problem.
DX Diag plays back the midi fine. I have tried reinstalling the latest drivers and the drivers from the disc with no luck at all. Also the default language has been stuck on Japanese as well. I have no idea why it started doing this but it seems to also affect any sound playback in my web browsers since I don't even get sound from any Flash files or Google video.Message Edited by zoglog on 06-23-2006 :38 PMMessage Edited by zoglog on 06-23-2006 :38 PM

Ok, well I did a clean sweep and clean reinstall of the drivers that fixed my language problem. However I cannot get the proper "Midi music playback" Default Device. Whenever I change it to something it reverts it to a blank no matter how many times I change it or uncheck "Use only default devices"
It does the exact same thing for "Voice playback"
I'm not sure if this is related but I don't get any sound from any web-browser Shockwave flash files.
This is really starting to get fustrating. Any help input would be greatly appreciated. I think the worst part about this is I know the midi works, it just won't let me assign the device....
Oh yeah, also even if I set the "place volume icon in taskbar" option in the sound and devices properties it wll not show. Not sure if this is related...Message Edited by zoglog on 06-23-2006 :44 PM

Audio Problems when setting default device

Everytime I try to set my headphones as the default sound device, my computer won't allow me to. I even tried to troubleshoot it, and it came up with the resolution of setting my headphones as the default device, but it failed to due to an error.
It only occurs whenever I use the program Mumble, as I am a gamer and I use it to communicate with my fellow gamers. So whenever I fire up the program, all other sound except what comes from it, goes to my speakers. I don't know if this has to do with the program Mumble itself, or the fact that I LITERALLY cannot change my default device. Please help?

What version of Windows are you using?
Also, could you please give me the exact model number of your notebook?
You can use the following document if you need assistance in finding it.
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c00033108&...
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

SCCM Remote Control - Set default to not "scale to fit"

We are using SCCM Remote Control Viewer (CmRcViewer.exe).
By default the view is set to "scale to fit" (with a tick) for every computer you connect to. If you change it to unticked it then reverts back for the next computer you connect to. Is there a way to set the default not to be scale to fit (unticked)?
I have looked through the registry but can't see anything obvious.
Thanks!

Sounds like a good DCR though which you can file on Connect (connect.microsoft.com) -- anything you file there goes directly into the product team's bug database. That doesn't mean it will get fixed, just that someone will review it and the more justification
you can add, the more likely it will be considered to be addressed in the future.
Jason | http://blog.configmgrftw.com

Set default address when card contains several

If someone in your address book has multiple email addresses, how do you set which address is the primary one to which email is sent? (Or does it go to all addresses?)

never answered... just cleaning up unanswered questions

Set Default Value of Multi-select list item

I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?

Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben

HT204053 I have different icloud and iTunes id's and I want to do homesharing for all my devices. I'm trying to set up a new iMac but homesharing is not working. SHould it be the itunes or iCloud id?

I have different icloud and iTunes id's and I want to do homesharing for all my devices. I'm trying to set up a new iMac but homesharing is not working. Should it be the itunes or iCloud id?

Welcome to the Apple Community.
Preferably your iTunes account, but it shouldn't really matter for getting homesharing turned on, as long as it's a valid ID.

I purchased my IPHONE 4S in canada particularly in Vancouver. i live in italy. my device displays "ACTIVATION REQUIRED". i also inserted my SIM card but my phone does not accept it. what shall i do?

i purchased my IPHONE 4S in canada particularly in Vancouver. i live in italy.
my device displays "ACTIVATION REQUIRED". i also inserted my SIM card but my phone does not accept it. what shall i do?
thank you and regards,
roger
<E-mail Edited by Host>

You're phone is locked to a carrier. You will need to contact the carrier you got you're phone from to have them unlock it.

ALSA default device - changing it

So...
I have three ways to output audio from my system.
- Laptop speakers / pluggable analog device (both work as same device, if something is plugged in, hardware automatically turns off the speakers, as in most laptops)
- HDMI audio
- Bluetooth audio
I'd like to have a simple (K.I.S.S.) way to
a) change the output source or
b) set the prority (order) and let the system automatically choose which output to use.
In case of B if no bluetooth audio device is found then try HDMI if that fails too then use speakers/analog output.
I'm not sure if it's even possible to recognize if HDMI is plugged or not...
In case of A some kind of control panel / applet would be nice.

Cdh wrote:
Have you tried asoundconf?
http://aur.archlinux.org/packages.php?ID=23382
asoundconf list
asoundconf set-default-card <one from the list>
It changes the ~/.asoundrc to include ~/.asoundrc.asoundconf and then sets the default card in ~/.asoundrc.asoundconf
But as this is plain alsa it will only affect newly started programs and maybe newly started audio output actions.
Thanks. I think that is a good solution anyways. I think I'll create menu items or something to have it "clickable".
Cdh wrote:When using pulseaudio you could use pavucontrol to change output streams from one device to the other on the fly.
My experiences with Pulseaudio are far from K.I.S.S..

[SOLVED] Setting default audio device pulseaudio

Now i finally get almost all sounds working, but i need to select somehow default output sound device, because i can't change it manually with 'pavucontrol'. When i run Windows applications with Wine i don't get sounds either and 'pavucontrol' is not giving any output of Windows game. Is these problem solved with changing default device if yes, how do i do it?
Using Logitech G930 sound card.
lsof /dev/snd/* output:
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
knotify4 3078 arska134 mem CHR 116,3 1568 /dev/snd/pcmC0D0p
knotify4 3078 arska134 20u CHR 116,33 0t0 3463 /dev/snd/timer
knotify4 3078 arska134 21r CHR 116,3 0t0 1568 /dev/snd/pcmC0D0p
pulseaudi 3218 arska134 mem CHR 116,7 6421 /dev/snd/pcmC1D0p
pulseaudi 3218 arska134 mem CHR 116,8 6422 /dev/snd/pcmC1D0c
pulseaudi 3218 arska134 20u CHR 116,9 0t0 6423 /dev/snd/controlC1
pulseaudi 3218 arska134 26u CHR 116,9 0t0 6423 /dev/snd/controlC1
pulseaudi 3218 arska134 27u CHR 116,8 0t0 6422 /dev/snd/pcmC1D0c
pulseaudi 3218 arska134 34u CHR 116,7 0t0 6421 /dev/snd/pcmC1D0p
pacmd list-sinks output:
Welcome to PulseAudio! Use "help" for usage information.
>>> 1 sink(s) available.
* index: 0
name: <alsa_output.usb-Logitech_Logitech_G930_Headset-00-Headset.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: RUNNING
suspend cause:
priority: 9049
volume: 0: 35% 1: 35%
0: -27.42 dB 1: -27.42 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 30.13 ms
max request: 3 KiB
max rewind: 344 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 1
configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.usb-Logitech_Logitech_G930_Headset-00-Headset>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Logitech G930 Headset"
alsa.long_card_name = "Logitech Logitech G930 Headset at usb-0000:00:13.1-2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:13.1-usb-0:2:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/sound/card1"
udev.id = "usb-Logitech_Logitech_G930_Headset-00-Headset"
device.bus = "usb"
device.vendor.id = "046d"
device.vendor.name = "Logitech, Inc."
device.product.id = "0a1f"
device.product.name = "Logitech G930 Headset"
device.serial = "Logitech_Logitech_G930_Headset"
device.form_factor = "headset"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Logitech G930 Headset Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB046d:0a1f"
module-udev-detect.discovered = "1"
device.icon_name = "audio-headset-usb"
device.intended_roles = "phone"
Solution:
gulafaran wrote:get the wine-pulse package from AUR and add "mmdevapi" to winecfg libraries and set it to disabled and set Audio to Pulseaudio
Last edited by Arska134 (2011-05-15 16:52:53)

and here is some console log when i tried to play Enemy-territory. Sounds not working.
http://paste.servut.us/plain/uyit
I found this:
------- sound initialization -------
SDL audio driver initializing...
SDL_AudioDriverName() = NULL
Why NULL?
Edit:
Sounds not working currently: System sounds, Enemy-territory, Call of duty 4 (with wine)
but works in Wings 2. O_o
Edit 2:
litemotiv wrote:Arska14, please update your topic title so that it reflects that it's a pulseaudio / wine question.
i removed Wine from topic title because it's not affecting wine only.
Last edited by Arska134 (2011-05-15 11:52:25)

[Solved] ALSA "This sound device does not have any controls" XDJ-R1

Hey guys,
I have a XDJ-R1 which includes a 24bit 44.1khz USB soundcard that can be used to record audio from the mixer.
When I plug it in it's detected fine. However using alsamixer (or amixer) I don't see any audio controls for volume.
If I start pulseaudio it will detect the device just fine. However, at 100% volume the audio seems rather low. I'm seeing about -24db while my mixer shows the output at around +2db. I suspect the ALSA volume is rather low. But have no way of changing it as I can't seem to see any controls!
Here are some command outputs:
alpaly -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: XDJR1 [PIONEER XDJ-R1], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=Intel
HDA Intel, ALC269 Analog
Default Audio Device
sysdefault:CARD=Intel
HDA Intel, ALC269 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
default:CARD=XDJR1
PIONEER XDJ-R1, USB Audio
Default Audio Device
sysdefault:CARD=XDJR1
PIONEER XDJ-R1, USB Audio
Default Audio Device
front:CARD=XDJR1,DEV=0
PIONEER XDJ-R1, USB Audio
Front speakers
surround40:CARD=XDJR1,DEV=0
PIONEER XDJ-R1, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=XDJR1,DEV=0
PIONEER XDJ-R1, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=XDJR1,DEV=0
PIONEER XDJ-R1, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=XDJR1,DEV=0
PIONEER XDJ-R1, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=XDJR1,DEV=0
PIONEER XDJ-R1, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=XDJR1,DEV=0
PIONEER XDJ-R1, USB Audio
IEC958 (S/PDIF) Digital Audio Output
amixer -c 1
(output is empty)
cat /proc/asound/devices
2: [ 0- 0]: digital audio playback
3: [ 0- 0]: digital audio capture
4: [ 0- 0]: hardware dependent
5: [ 0] : control
6: [ 1- 0]: raw midi
7: [ 1- 0]: digital audio playback
8: [ 1- 0]: digital audio capture
9: [ 1] : control
33: : timer
(with pulseaudio on) pacmd list-sources
3 source(s) available.
index: 2
name: <alsa_input.usb-Pioneer_PIONEER_XDJ-R1_PIONEER_XDJ-R1-00-XDJR1.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s24le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
fixed latency: 99.95 ms
card: 1 <alsa_card.usb-Pioneer_PIONEER_XDJ-R1_PIONEER_XDJ-R1-00-XDJR1>
module: 5
properties:
alsa.resolution_bits = "24"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "PIONEER XDJ-R1"
alsa.long_card_name = "Pioneer PIONEER XDJ-R1 at usb-0000:00:1d.1-2, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.1-usb-0:2:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/sound/card1"
udev.id = "usb-Pioneer_PIONEER_XDJ-R1_PIONEER_XDJ-R1-00-XDJR1"
device.bus = "usb"
device.vendor.id = "08e4"
device.vendor.name = "Pioneer Corp."
device.product.id = "0170"
device.product.name = "PIONEER XDJ-R1"
device.serial = "Pioneer_PIONEER_XDJ-R1_PIONEER_XDJ-R1"
device.string = "front:1"
device.buffering.buffer_size = "26448"
device.buffering.fragment_size = "6612"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "PIONEER XDJ-R1 Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB08e4:0170"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
ports:
analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
properties:
active port: <analog-input>
What might I be missing? Why can PA figure the device out but ALSA can't?
Last edited by EvanPurkhiser (2014-04-16 09:27:13)

I'm interested in recording from the mixer over USB.
The device also supports playback into the mixer, but I assume this is designed for use in conjunction with using the device as a MIDI-Controller, which I don't have any intentions of doing.
What I've been doing to check the levels of the device is to play a track through the device (making sure that the VU meter for the channel is peaking at around 0db), record using `ffmpeg -f pulse -i 1 recording.wav` and then running `ffmpeg -i recording.wav -af "volumedetect" -f null /dev/null`
Which looks something like this:
[Parsed_volumedetect_0 @ 0x1f0eb80] n_samples: 10265206
[Parsed_volumedetect_0 @ 0x1f0eb80] mean_volume: -26.1 dB
[Parsed_volumedetect_0 @ 0x1f0eb80] max_volume: -12.0 dB
[Parsed_volumedetect_0 @ 0x1f0eb80] histogram_12db: 21
[Parsed_volumedetect_0 @ 0x1f0eb80] histogram_13db: 238
[Parsed_volumedetect_0 @ 0x1f0eb80] histogram_14db: 1619
[Parsed_volumedetect_0 @ 0x1f0eb80] histogram_15db: 7703
[Parsed_volumedetect_0 @ 0x1f0eb80] histogram_16db: 29370
I actually _can_ record directly from alsa, but I have to tell it the format, rate, and channels of the device.
[netbook/scratch/]> arecord -D hw:1 test.wav
Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
arecord: set_params:1233: Sample format non available
Available formats:
- S24_3LE
[netbook/scratch/]> arecord -D hw:1 -f S24_3LE test.wav
Recording WAVE 'test.wav' : Signed 24 bit Little Endian in 3bytes, Rate 8000 Hz, Mono
arecord: set_params:1239: Channels count non available
[netbook/scratch/]> arecord -D hw:1 -f S24_3LE -c 2 test.wav
Recording WAVE 'test.wav' : Signed 24 bit Little Endian in 3bytes, Rate 8000 Hz, Stereo
Warning: rate is not accurate (requested = 8000Hz, got = 44100Hz)
please, try the plug plugin
[netbook/scratch/]> arecord -D hw:1 -f S24_3LE -c 2 -r 44100 test.wav
Recording WAVE 'test.wav' : Signed 24 bit Little Endian in 3bytes, Rate 44100 Hz, Stereo
The volume is still just as low as recording with PA though

HT204380 How to set my iPad as a default device while my iPhone and iPad share a same email address?

How to set my iPad as a default device while my iPhone and iPad share a same email address?

Shiv1611 wrote:
Though i am still gona try using the same Itunes. Will same Itunes support two apple ids.
That depends on what you mean. If you mean two iTunes Store accounts, no. Only one Apple ID can be logged into the iTunes Store at a time and if automatic download, iTunes Match or re-downloading of content is used the ID can not be changed for 90 days.
Shiv1611 wrote:
So i guess if i solve my goof up on creating different apple IDs and setting her phone as a new one .. according to you that shall do the trick.
But i have a question here in that case what happens to all the applications that have been purchased on my Id ? Wont i be needing them to be purchased/downloaded again in the new id?
If you previously had been using the same Apple ID for iTunes Store purchases for both of you there is no reason to change what you've been doing. If this is your wife's first iPhone, and you want to share the iTunes Store account just don't use the new Apple ID you created. As long as there are no purchases on it there's nothing to worry about.

Set default audio device?

Prior to installing OSX Yosemite, the system audio output would be automatically switched to my USB audio device as soon as it was plugged in and detected by the OS. In Yosemite, I have to manually switch the output from Internal Speakers to the USB device.
Is there a way to force the setting to change on its own, as it did before?

Hello
I do not want to hard wire the Ipod HIFI. I understand that if I used the line out feature the system would recognize the device. I would like the system to recognize a remote speaker connected by wireless network and to accept this remote speaker as the default audio device. Not likely but should be an option.
Cheers
Warrene
iMac intel Core Duo Mac OS X (10.4.6) Airport Extreme and Express, iPod HIFI, iPods
iMac intel Core Duo Mac OS X (10.4.6) Airport Extreme and Express, iPod HIFI, iPods

I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage

I have like five GB's of ghost data (data the device claims is not there but it is still taking up space) on my I pad 2 from a failed movie download attempt. How do I fix that with out resting my iPad? I have only 1GB left of storage
The movie had gotten to the point that I could watch it all the way through but it still said processing and got stuck at that point and when I turned off the wifi to try to restart it, it deleted its-self but did not free up any of the storage It was taking up
Restarting my iPad does not help
Some thing similar also happened to my old laptop when trying to download the iOS 5 update to my laptop when it came out. It kept getting disconnected and every time it would try to start over and act like what had already been downloaded was not there though it was still taking up the storage space.
And it continued repeating until it took up all of my storage space. The data file would not show up anywhere so I had to restore my laptop to the factory settings and that worked for awhile but I eventually had to get a new laptop.

Did you try to set it up as new device, as explained in this article?
How to erase your iOS device and then set it up as a new device or restore it from backups
If this does not work, use iTunes to set it back to factory settings, which would also install the latest software:
Use iTunes to restore your iOS device to factory settings - Apple Support

ALSA: Setting default device (Not card, but device)

Similar Messages

Maybe you are looking for