Alternative solution for IRM

hi Experts,
My customer is aware that IRM will not be developed further by oracle, here is the concern:
1.What is the reason for this?
2.What is the suggestion from oracle if customer need this kind of solution?
3.What the successive product could be, when it is planned to be available?
Best regards

You could store your secure data in session using a generated unique attribute key, then place the attribute key in a hidden field.

Similar Messages

Re: Alternative Solution for Field-Groups.

Dear Experts,
I have copied one program from older version system to new version system, in this program field groups are used.
In the new version i have to modify this program as per programming guide lines, so i used Code Inspector(SCI), so in Code Inspector check for field groups error is showing and this error message cannot be hidden using pseudo-comment.
So anyone could please suggest the alternative solution.
Below code is used in the program.
{FIELD-GROUPS: HEADER, ITEM.
INSERT T001-BUKRS MARA-MATNR INTO HEADER.
INSERT MAKT-MAKTX MARC-XCHAR T001-BUTXT T001W-NAME1VBBE-OMENG INTO ITEM.
other processing
EXTRACT ITEM.
other processing}

Hi Friends, I have a requirement as below Source NUM1 123456789 TARGETNUM1,2,3,46,7,8,9.... I WANT TO LOAD FIRST FOUR RECORDS FROM SOUCE INTO SINGLE RECORDS IN TARGET AND SO ON.. PLEASE PROVDE SOLUTION FOR ABOVE SCENARIOTHANKS IN ADVANCE

Having problems with audio jacks, connections are shorting. i need an alternative solution for mixing in logic

i am having problems with mac pros audio jacks,any alternative solutions ?

If you're mixing in Logic, buy a FireWire audio interface. So many people make them, that it isn't funny. Personally, I'm a fan of M-Audio interfaces for a cheap, high quality device.
Here's some FireWire interfaces, they also make USB products.
http://m-audio.com/index.php?do=products.family&ID=FWinterfaces

Best coverflow and missing feature alternative solutions for all platforms.

Personally for me coverflow was a important feature. Not JUST a feature but what really defined iTunes as BEING iTunes.
I would have actually loved if apple instead of removing it expanded on it and made it faster,better,stronger. With things like back label support so on and so forth.
I'd like the communities thoughts on some of the best alternatives for the missing coverflow & other features currently left out of iTunes 11 on both Mac and Windows.
Also, If there is a way to link(link up) any of those to iTunes 11 for track and volume control. Ideally for not just sending but also receiving track and volume input.
And whats the absolute BEST solution for each platform. I understand running iTunes 10.7 or 11 sandboxed or on another machine may also be an option.
So.. lets look at things like resource usage Vs usability...
For me CAD (CD Art Display) has always been helpful especially combined with raindrop even tho it doesn't have flow options for the most part on 99% of themes. It still makes my library pop.
Looks like there are 3 options for Mac
Steel Sky (SteelSkies)
Everplay
CoverStream
Its worth noting Everplay has Last.FM support. Not sure if that can be integrated into iTunes 11 somehow.
For windows the only thing i could find remotely like coverflow is a widget called XDeskCover
To mods:
Please stop deleting my posts. If you want to take the time to completely remove a feature from a program atleast let us explore some alternatives so we can continue actually using apple products.

another method suggested in these forums in the post "session manager stopped working with firefox 3" by Charles Anderson works for me and allows me to use my little X.
go to options -> General tab
under startup/when firefox starts -> change to something other than "show my windows and tabs from last time".
I've had this on show my homepage previous and it got changed somewhere and I think it was from an update or addon which is why a few others are having the same issue.

Alternative Solution for Form 16 with Digital Signature.

Dear All,
My Basis people have tried lot, but they have failed to set up ADS Server, for Digital Signature to be implemented for Form 16.
Can anyone, please provide me with any other solution to get Digital Signature implemented may be via some Z programs or Z customizations. Kindly help me out, as this is an important requirement from the board members of my client. If I fail on this, it would be having some serious repercussions.
Looking forward for an earnest reply. Please don't provide solutions related to SE78(Sapscript .jpg upload).
With Best Regards,
Mithilesh Kumar Singh

Form 16 Configuration for ESS - ERP Human Capital Management - SCN Wiki
1589254 - Form 16 central note for ADS configuration
see the PDF Form 16 (print preview) in PC00_M40_F16 transaction in ECC (R/3)

Is ther any alternative solution for music downloads other than iTunes

Plz suggest me if there is any other service out there that provides music download service other than iTunes.
One with DRM-Free & Monthly subscription would be awesome..!
Thanks in advance.

Okay, in removing duplicate posts, these got pulled. Here they are...
<hr width="95%">
StarDeb55 Posted: May 29, 2007 9:14 PM
Kirk, I'm almost certain that any Napster downloads have DRM on them. 2nd problem is that Napster doesn't work for a Mac.
The forums are having problems as you can see. When you post it is taking over 30 minutes to appear in the thread at the moment, so it's really not necessary to re-post.
<hr width="95%">
Kirk Boragine Posted: May 29, 2007 9:32 PM
StarDeb55
My mistake. I've been happily listening to their streams. The subscription service does not work for Macs, yet. Sorry to all for the post(s).
[ sorry about that, Nubz N.]
PM G5, PM G4, iPods Mac OS X (10.4.9) Mac OS 9.2.2

Need alternative solution for SAP Note, kindly do needful

Dear Consultants,
Our client is not able to apply SAP NOTE (SAP NOTE :- 1850965) for the issue (http://scn.sap.com/thread/3517341)due to some technical problem, kindly suggest if any other way is there to solve this issue, please do needful.
Thanks & Regards,
Navesh

Dear Consultants,
Please do needful, I need your help.
Thanks & Regards,
Navesh

Standard FICA datasoources ate missing- Alternative solution

Hi All,
Our ISU system is in ECC6 with out any Ehp. CRM-2005 is connected with ISU system through middleware.
We are missing standard FICA BW datasources( 0FC_BP_ITEMS,0FC_DUN_HEADER,0FC_DUN_ITEMS) due to unavalability of Ehp in the ISU system.
If Ehp will be apply to ISU system, CRM system need to be upgraded to CRM7 which is not feasible in current time.
As per BW implementation we need to use these extractors which are based on important FICA tables.As the base table for these extractors will have huge volume of data(Utilities Industry).
Request you to help us the alternative solution for this without upgrading any Ehp in the ISU system. If we will create custom extractors performance issue may come.
I have refered the Blogs where performance issue is mentioned for custom extractor.
Regards,
Asish

You listed two of the best options possible...
1) Upgrade ECC to EHP2 and CRM to CRM 7.0.
2) Create generic DataSources from the source tables.
The only other option you would have is to create a remote-enabled FM in your source ECC environment to extract data out of the source table(s) and insert into an ITAB, create an ABAP program in your BW environment that calls the remote-enabled FM and receives the extracted data ITAB and then load that data into a custom table in BW. Then create a generic DataSource on that custom table in BW. Realize, this would pretty much be the same as creating a generic DataSource on the ECC environment, but would be more easily replaced when you do eventually update and potentailly move to the standard content DataSources.

BI 7.0 Security: Replace SAP_ALL with alternative solution

Hello,
In an effort to remove SAP_ALL from user accounts in BI 7.0, I need to find an alternative solution for allowing users to create, execute, and delete BEx queries. Initially, I was thinking of creating two roles, derived from the SAP_ALL template. One role would allow users to create, execute, and delete queries; the other role would allow users to only execute BEx queries. Since I'm new to BI 7.0, I'm not quite sure if this is the best approach. If someone has experience with this scenario, please advise.
Thank you in advance.

Hi Cedric,
You definitely need to move away from SAP_ALL in BI 7.0. The blog mentioned explains how the new features of BI 7.0 work, but I feel your issue is a bit more fundamental. Do you have a security strategy / design for your BI reports that you are trying to deploy?
You need to consider who can access what data in BI as well as which sets of queries. Once you have an idea for that if you look at how the S_RS_COMP authorisation object works, implementing roles with restrictions on that object will achieve restrictions on which users can access which queries.
There are SAP delivered templates for query execution roles, that you can look at to get you a starting point - but you'll still need to having a good naming convention for queries as well as an understanding of where your BI data is stored, to be able to restrict access.
Once you've considered the data and reports, you may need to further restrict information by the use of analysis authorisations on specific characteristics, which is where the blog will help you.

Want robust solution for alternating row color, resetting every group

I would like a solution for displaying an alternating row color for my detail rows that resets every group, so that row 1 is always gray.
Our Crystal designer provided this code to me:
@rowcnt formula, suppressed, placed in Detail row:
Shared numbervar rowcnt;
rowcnt := rowcnt + 1;
@resetrowcnt, suppressed, placed in Group row:
Shared numbervar rowcnt;
rowcnt := 0;
Formatting formula, placed in Color in Detail > Section Expert:
Shared numbervar rowcnt;
if Remainder(rowcnt, 2) <> 0 then
color(241,241,241)
else
crWhite
This was working fine for me.
However, it is suddenly not working in one of my reports.
The report does happen to have two groups (rowcount.png).
When the report is run, all rows are colored (rowcount02.png).
This report was previously working fine! I'm not sure what changed.
In any case... surely there must be standard code to do this very standard formatting.
I would be very grateful if someone could post some robust code to accomplish the following:
REPORT DATA IN DETAIL ROW, ALTERNATE ROW BANDING:
- Data in Detail row displays alternating row colors
- Odd rows are always shaded, even rows not
- Banding resets every group / does not continue pattern from previous group
REPORT DATA IN GROUP ROW, ALTERNATE ROW BANDING:
Some of our reports place row data in a group row (just the way it happened).
If you could also modify your code in this case.
Thank you!

Hi Abhilash/Sastry, since I'm going to switch to Sastry's formulas, could you please confirm correctness of the following. I can't actually run this report, I can only provide it to our London office, bit of a lag for testing.
@resetrowcnt:
Whileprintingrecords;
Numbervar cnt:=0;
@rowcnt:
Whileprintingrecords;
if {HedgeDetails.StrategyID} <> previous({HedgeDetails.StrategyID}) and
{HedgeDetails.DealID} <> previous({HedgeDetails.DealID}) then
Numbervar cnt:=cnt+1;
Details section (Suppress):
not(OnFirstRecord) and
{HedgeDetails.StrategyID}=previous({HedgeDetails.StrategyID}) and
{HedgeDetails.DealID}=previous({HedgeDetails.DealID})
Please note: Suppress checkbox is selected AND the above formula is entered.
Details section (Color):
Whileprintingrecords;
Numbervar cnt;
if cnt mod 2 <> 0 Then color(241,241,241) else crwhite

Is RoboHelp Server the solution for us?

Hi all,
I'm trying to figure out whether RH Server is the solution for us. I've seen a few similar posts in the forums, but none that really answer my specific questions. I'm hoping for feedback from someone with experience in RH Server, who is perhaps in a similar situation to us.
We are a software development company, creating desktop software for PCs. We have three main applications, and approximately 20,000 users. I am the company's (only) Tech Writer.
Currently I provide documentation (user guides) to our clients in the form of the good ol' CHM file. I develop these in RH8. Each of our applications is bundled with an installed CHM file which users access by pressing F1. I'm sure you're all familiar with this process. Our users run our software on their own systems, completely independent of us - there's no connection to us whatsoever. However, they all have Internet access, as it's a requirement for them to be able to use certain functionality within our applications. Hold that thought.
I also write Knowledge Base Articles in MS Word, as PDFs, which users access via our web site. Internal to our organisation, I provide KBAs and other such material for our Technical Support staff. These aren't available/accessible to the public. I write these in Word because they need to be sent around to a team of reviewers from time-to-time, and whilstI'm the only person with RH installed, everyone has Word.
What I'm hoping to achieve with RH Server is this:
Do away with the old CHM files that our users have. They're just awful. I'm hoping that in future, when our users press F1 from within our applications, they will be taken to a corresponding page on a web site or AIR page similar to what the Adobe Help looks like when we access it from RoboHelp. Forgive my ignorance if I've used incorrect terminology. That way they'll always be reading the latest Help content, live, online, instead of what I wrote last time we sent a product update out. I imagine our programmers will have to edit the functionality behind the action of our users pressing F1 in our applications. Has anyone done this? Are there any issues we should be aware of? What happens if our users don't currently have Internet access, for example - is it possible to call a local version of the Help instead, if this is detected? Has anyone done this with a similar number of users to us? We could well have 100s of users trying to access the system simultaneously.
Gather feedback from users. From what I understand, we'll be able to use RH Server to see which Help topic/content is being viewed, and also receive feedback from users. Can anyone give me feedback on their experiences with this? Any tips/hints/issues I need to be aware of? Is it possible for us to determine which users accessed which content? Remember, the idea is that users should be able to access this content by pressing F1 - I don't want them to have to sign in every time they need to access our Help system - it should be seamless to them. So, I'm wondering how it would be possible to track user usage without making them sign in. This is important to us because some of our content is region-specific, and it would be handy to know if users from those regions are actually accessing the Help content that relates to them.
Host our internal documentation on the same server as our public documentation. Is it possible to host all of our internal, private documentation on the same RH Server, making it available to our Tech Support team (and other internal teams) only? I imagine we could do this by password-protecting it, but I want to ensure that the public don't even know it exists. ...and our Tech Support people would not be impressed with having to sign in every time they wanted to access their Knowledge Base. Any tips here regarding locking down / restricting access to content?
A quick note about collaboration:
Currently, although the Help menus are developed in RH, the KBAs and other PDF documents are written in MS Word. I send them around to a team of reviewers who add their comments/edits and send them back to me. From what I understand, this is something I can do with RH10 - export PDFs and send them around for review, combining the results later, at which time I give them a final review before publishing. Have I understood this correctly? Does RH Server play a part in this process? Can I use RH Server's feedback capabilities as a mechanism for my review team to make edits/comments? I guess I'm trying to get an understanding of how sophisticated the RH Server feedback system is. If I can use RH Server to have the team read/review documents, it'll save me having to manage a bunch of Word documents that I email them. It'll also minimise the chance that a redundant document gets distributed by mistake - something that can occur because people use their locally-saved documents I emailed them earlier, instead of the finals.
Thank you.

Hi, symmetricalMan
Let's see if I can tackle some of these "inline". There are a lot of moving parts to your system (you're a busy guy!)
I only have time for a few of these. Perhaps Colum McAndrew and others will chime it with their experiences.
>>they will be taken to a corresponding page on a web site or AIR page similar to what the Adobe Help looks like when we access it from RoboHelp.
It would be WebHelp Pro in the scenario you mention (not AIR Help).
By "taken to a corresponding page" you are referring to Context Sensitive Help which RoboHelp Server does support (including your F1 scenario).
>>What happens if our users don't currently have Internet access, for example - is it possible to call a local version of the Help instead, if this is detected?
Hmm. You could either package a plain WebHelp (not Pro) output and distribute for access on a share drive. The detection thing would be up to your developers. Come to think of it, AIR Help does have a potential alternative here which might be worth looking into. Obviously, there would be two systems to maintain. I'm not up to date on it, but you'll find info here in the online help: http://help.adobe.com/en_US/robohelp/robohtml/WS81F63111-6ACF-4a02-B2B2-461FEBFA8093.html
>>.we'll be able to use RH Server to see which Help topic/content is being viewed, and also receive feedback from users.
Actually, the "feedback" is anonymous (no names are collected.) You can however, create "Areas" and analyze the traffic on topics according to sub-sets of your users.
The feedback is not direct from the users. In other words, RoboHelp Server (at least for now) does not support Commenting (as AIR Help does). So Feedback Reports are derived from the end-users "surfing" your site and collecting their search terms verbatim to get an idea of what they are searching for in order to improve your content.
>>So, I'm wondering how it would be possible to track user usage without making them sign in.
RH Server Sites do not have to be "Protected" by authentication. It is your choice. You can have some sites (called Areas) that are authenticated and some sites that are not authenticated, all on the same RH Server. RoboHelp Server uses a database and can authenticate users (by setting up protected "Areas".) However, my networking knowledge is limited and you would have to ask someone else about "persistent logins" etc.
>>content is region-specific, and it would be handy to know if users from those regions are actually accessing the Help content that relates to them.
Yes, you can do this. This is where RoboHelp Server can be used to create "Areas" for different content to be delivered to different audiences.
>>Is it possible to host all of our internal, private documentation on the same RH Server,
Yes you can. However the Tech Support sign in scenario question would have to be answered by someone else. It's hard to know from where I sit.
>>RH10 - export PDFs and send them around for review, combining the results later, at which time I give them a final review before publishing
Yes, this workflow would seem to work for you. However, RoboHelp Server plays no role in this review one way or the other. There are many alternatives for sharing the PDF which is described in the documentation.
See #6 on this page:
http://help.adobe.com/en_US/robohelp/robohtml/WS1b49059a33f77726-2db1c75912bc47baaf8-7ffb. html
You should also download the Adobe RoboHelp Server Reviewer's Guide which also has videos embedded.
http://www.adobe.com/support/documentation/en/robohelp/9/AdobeRoboHelpServer9_ReviewersGui de.pdf
Hope this helps
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com
Twitter: @hypertexas

Enterprise solution for Mobile phones using Wi-Fi

Hi All,
Not sure if this is the right forum.
We are working in a building where we do not get mobile phone coverage ie cannot get signals at all from our telcos
We recently bought a lot of APs ie AIR-CAP3502I-N-K9 + WLC and start deploys wireless around our building for data.
Just wondering what alternative solutions or software we can use so we can somehow get our users' mobile to work.
Thanks
QL

We are working in a building where we do not get mobile phone coverage ie cannot get signals at all from our telcos
The Future of Hotspots: Making Wi-Fi as Secure and Easy to Use as Cellular
Configuring Mobile Concierge
If I read correctly, Cisco has started implementing 802.11u with the soon-to-be-release WLC firmware code 7.3.X called Mobile Concierge.
I am not sure about how to get this running but I hope this two links I've posted will get you to work.
Unfortunately, I am also not sure how mobile phone carriers will like this if mobile phones will go to an Enterprise wifi instead of their own network.

Docking solutions for Late 2013 MBPr

I recently started a new job and I was issued the latest version of the 13" MacBook Pro as my work machine. My setup currently consists of two 22" Dell monitors, which take up the majority of my desk space. For the first few days, I tried to use the two monitors as well as the laptop display as a third, however I wasn't satisfied with the legibility of the retina display (specifically when working in Windows) while at my desk. It seems as though it would be fine if the laptop was directly in front of me (in other words, if I were using as a laptop), but for the majority of the time, I'll be at my desk in front of the two Dell monitors.
Space is also a concern; for my desk phone to be comfortably within reach, it resides to the right of the second Dell monitor. In my current setup, the laptop is directly in front of it, so again, using that display doesn't really work in my favor (unless I want to close it every time I pick up the phone.
Finally, the mess of cords I have to disconnect from the MacBook each time I pick it up is not especially attractive or functional.
So, I'm wondering if there's a vertical docking solution (specifcially for the latest MacBook Pro) that might save some space on my desk as well as make the transition from desk work to field work a little more seamless. I've looked around a bit and found a few solutions for older MacBook Pros (like the Henge Docks), but these all seem to have too many connections for the new model.
Being able to place the closed laptop in a vertical stand that has plugs for all my devices at the bottom would be idea. In a perfect world, my dock would look something like these: http://hengedocks.com/images/m_HD01VA13MB.jpg
However, I've heard poor reviews about the Henge Docks (and again, they don't make one for the model I have) and everything else I've seen seems to be more or less a hub for cables with no dock compenent (which doesn't resolve my space issue).
So, my question is: Does the perfect dock exist? And if it doesn't, what are the alternatives? I bought a BookArc for my MacBook Air which gets the job done as far as not taking up too much space is concerned, but never looked into a solution for cable management. I don't think I'd be entirely opposed to getting two components for my work machine (say, a BookArc-like dock and a separate hub that combines all my cables into one connector). If I go that route, do I have any better options?

Robertc86,
your first link shows a US-style keyboard.

Is Oracle Text the right solution for this need of a specific search!

Hi ,
We are on Oracle 11.2.0.2 on Solaris 10. We have the need to be able to do search on data that are having diacritical marks and we should be able to do the serach ignoring this diacritical marks. That is the requirement. Now I got to hear that Oracle Text has a preference called BASIC_LEXER which can bypass the diacritical marks and so solely due to this feature I implemented Oracle Text and just for this diacritical search and no other need.
I mean I set up preference like this:
ctxsys.ctx_ddl.create_preference ('cust_lexer', 'BASIC_LEXER');
ctxsys.ctx_ddl.set_attribute ('cust_lexer', 'base_letter', 'YES'); -- removes diacritics
With this I set up like this:
CREATE TABLE TEXT_TEST
NAME VARCHAR2(255 BYTE)
--created Oracle Text index
CREATE INDEX TEXT_TEST_IDX1 ON TEXT_TEST
(NAME)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('LEXER cust_lexer WORDLIST cust_wl SYNC (ON COMMIT)');
--sample data to illustrate the problem
Insert into TEXT_TEST
   (NAME)
Values
   ('muller');
Insert into TEXT_TEST
   (NAME)
Values
   ('müller');
Insert into TEXT_TEST
   (NAME)
Values
   ('MULLER');
Insert into TEXT_TEST
   (NAME)
Values
   ('MÜLLER');
Insert into TEXT_TEST
   (NAME)
Values
   ('PAUL HERNANDEZ');
Insert into TEXT_TEST
   (NAME)
Values
   ('CHRISTOPHER Phil');
COMMIT;
--Now there is an alternative solution that is there, instead of thee Oracle Text which is just a plain function given below (and it seems to work neat for my simple need of removing diacritical characters effect in search)
--I need to evaluate which is better given my specific needs -the function below or Oracle Text.
CREATE OR REPLACE FUNCTION remove_dia(p_value IN VARCHAR2, p_doUpper IN VARCHAR2 := 'Y')
RETURN VARCHAR2 DETERMINISTIC
IS
OUTPUT_STR VARCHAR2(4000);
begin
IF (p_doUpper = 'Y') THEN
   OUTPUT_STR := UPPER(p_value);
ELSE
   OUTPUT_STR := p_value;
END IF;
OUTPUT_STR := TRANSLATE(OUTPUT_STR,'ÀÁÂÃÄÅÇÈÉÊËÌÍÎÏÑÒÓÔÕÖØÙÚÛÜÝàáâãäåçèéêëìíîïñòóôõöøùúûüýÿ', 'AAAAAACEEEEIIIINOOOOOOUUUUYaaaaaaceeeeiiiinoooooouuuuyy');
RETURN (OUTPUT_STR);
end;
--now I query for which name stats with a P%:
--Below query gets me unexpected result of one row as I am using Oracle Text where each word is parsed for search using CONTAINS...
SQL> select * from text_test where contains(name,'P%')>0;
NAME
PAUL HERNANDEZ
CHRISTOPHER Phil
--Below query gets me the right and expected result of one row...
SQL> select * from text_test where name like 'P%';
NAME
PAUL HERNANDEZ
--Below query gets me the right and expected result of one row...
SQL> select * from text_test where remove_dia(name) like remove_dia('P%');
NAME
PAUL HERNANDEZMy entire need was only to be able to do a search that bypasses diacritical characters. To implement Oracle Text for that reason, I am wondering if that was the right choice! More so when I am now finding that the functionality of LIKE is not available in Oracle Text - the Oracle text search are based on tokens or words and they are different from output of the LIKE operator. So may be should I have just used a simple function like below and used that for my purpose instead of using Oracle Text:
This function (remove_dia) just removes the diacritical characters and may be for my need this is all that is needed. Can someone help to review that given my need I am better of not using Oracle Text? I need to continue using the functionality of Like operator and also need to bypass diacritical characters so the simple function that I have meets my need whereas Oracle Text causes a change in behaviour of search queries.
Thanks,
OrauserN

If all you need is LIKE functionality and you do not need any of the complex search capabilities of Oracle Text, then I would not use Oracle Text. I would create a function-based index on your name column that uses your function that removes the diacritical marks, so that your searches will be faster. Please see the demonstration below.
SCOTT@orcl_11gR2> CREATE TABLE TEXT_TEST
2    (NAME VARCHAR2(255 BYTE))
3 /
Table created.
SCOTT@orcl_11gR2> Insert all
2 into TEXT_TEST (NAME) Values ('muller')
3 into TEXT_TEST (NAME) Values ('müller')
4 into TEXT_TEST (NAME) Values ('MULLER')
5 into TEXT_TEST (NAME) Values ('MÜLLER')
6 into TEXT_TEST (NAME) Values ('PAUL HERNANDEZ')
7 into TEXT_TEST (NAME) Values ('CHRISTOPHER Phil')
8 select * from dual
9 /
6 rows created.
SCOTT@orcl_11gR2> CREATE OR REPLACE FUNCTION remove_dia
2    (p_value   IN VARCHAR2,
3      p_doUpper IN VARCHAR2 := 'Y')
4    RETURN VARCHAR2 DETERMINISTIC
5 IS
6    OUTPUT_STR VARCHAR2(4000);
7 begin
8    IF (p_doUpper = 'Y') THEN
9       OUTPUT_STR := UPPER(p_value);
10    ELSE
11       OUTPUT_STR := p_value;
12    END IF;
13    RETURN
14       TRANSLATE
15         (OUTPUT_STR,
16          'ÀÁÂÃÄÅÇÈÉÊËÌÍÎÏÑÒÓÔÕÖØÙÚÛÜÝàáâãäåçèéêëìíîïñòóôõöøùúûüýÿ',
17          'AAAAAACEEEEIIIINOOOOOOUUUUYaaaaaaceeeeiiiinoooooouuuuyy');
18 end;
19 /
Function created.
SCOTT@orcl_11gR2> show errors
No errors.
SCOTT@orcl_11gR2> CREATE INDEX text_test_remove_dia_name
2 ON text_test (remove_dia (name))
3 /
Index created.
SCOTT@orcl_11gR2> set autotrace on explain
SCOTT@orcl_11gR2> select * from text_test
2 where remove_dia (name) like remove_dia ('mü%')
3 /
NAME
muller
müller
MULLER
MÜLLER
4 rows selected.
Execution Plan
Plan hash value: 3139591283
| Id | Operation                   | Name                      | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |                           |     1 | 2131 |     2   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| TEXT_TEST                 |     1 | 2131 |     2   (0)| 00:00:01 |
|* 2 |   INDEX RANGE SCAN          | TEXT_TEST_REMOVE_DIA_NAME |     1 |       |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("SCOTT"."REMOVE_DIA"("NAME") LIKE "REMOVE_DIA"('mü%'))
       filter("SCOTT"."REMOVE_DIA"("NAME") LIKE "REMOVE_DIA"('mü%'))
Note
   - dynamic sampling used for this statement (level=2)
SCOTT@orcl_11gR2> select * from text_test
2 where remove_dia (name) like remove_dia ('P%')
3 /
NAME
PAUL HERNANDEZ
1 row selected.
Execution Plan
Plan hash value: 3139591283
| Id | Operation                   | Name                      | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |                           |     1 | 2131 |     2   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| TEXT_TEST                 |     1 | 2131 |     2   (0)| 00:00:01 |
|* 2 |   INDEX RANGE SCAN          | TEXT_TEST_REMOVE_DIA_NAME |     1 |       |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("SCOTT"."REMOVE_DIA"("NAME") LIKE "REMOVE_DIA"('P%'))
       filter("SCOTT"."REMOVE_DIA"("NAME") LIKE "REMOVE_DIA"('P%'))
Note
   - dynamic sampling used for this statement (level=2)
SCOTT@orcl_11gR2>

How to find solution for avoiding WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product

HI All,
We are using Oc4j version 10g 10.1.3 , and while starting conatiner getting below warning , let me know if anyone have solution for this,.
14/01/10 01:01:29 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product!
Please take the appropriate actions to migrate to an alternative strategy! **********
2014-01-10 01:01:29.833 WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release
of this product!

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

Alternative solution for IRM

Similar Messages

Maybe you are looking for