Alv FRID with detail & summary sections

Hi,
I want a ALV Grid report with Details pages & at last(next page) Summary report can any one suggest how to perform this
regards
Bobby

Hai Bobby
the following code will help your requirement
REPORT ZALV_SAMP .
TABLES: MARA.
TYPE-POOLS : SLIS.
Data declaration
DATA: BEGIN OF I_MARA OCCURS 0.
        INCLUDE STRUCTURE MARA.
DATA: END OF I_MARA.
DATA: V_REPID LIKE SY-REPID.
selection-screen
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR.
PARAMETERS: P_MTART LIKE MARA-MTART DEFAULT 'ROH'.
SELECTION-SCREEN END OF BLOCK B1.
initialisation
INITIALIZATION.
S_MATNR-LOW = '1400'.
S_MATNR-HIGH = '1500'.
APPEND S_MATNR.
V_REPID = SY-REPID.
start-of-selection
START-OF-SELECTION.
SELECT * FROM MARA
    INTO TABLE I_MARA
    WHERE MATNR IN S_MATNR AND
          MTART = P_MTART.
CHECK SY-SUBRC = 0.
end of selection
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
   I_STRUCTURE_NAME               = 'MARA'
IS_LAYOUT                      =
IT_FIELDCAT                    =
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = I_MARA
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at i_mara.
write:/ i_mara.
endloop.
Thanks & regards
Sreenivasulu P

Similar Messages

How can i show details in ALV GRID with double click in a row?

Hello, ich try to show the details of a row with double click in the line,
but it doesn't work!?
I have a eventhandler for doubleclick and the program run this code, but what i have to do, to show the details!?
I try it with some methods like cl_gui_cfw=>set_new_ok_code, ...
i think about the methods cl_gui_alv_grid->show_detail, but this method is private,
i can create a class with inheritance of the cl_gui_alv_grid class and try this method!?
Have anybody any ideas!?

Hello Lars
The following sample reports shows an ALV list with company codes. Double-clicking on any company code will open a second ALV list displaying all customers.
*& Report ZUS_SDN_ALVGRID_EVENTS_1
REPORT zus_sdn_alvgrid_events_1.
DATA:
gd_okcode        TYPE ui_func,
gt_fcat          TYPE lvc_t_fcat,
go_docking       TYPE REF TO cl_gui_docking_container,
go_docking2      TYPE REF TO cl_gui_docking_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid.
DATA:
gt_t001          TYPE STANDARD TABLE OF t001,
gt_knb1          TYPE STANDARD TABLE OF knb1.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_t001     TYPE t001,
      ls_col_id   TYPE lvc_s_col.
    CHECK ( sender = go_grid1 ).
    READ TABLE gt_t001 INTO ls_t001 INDEX e_row-index.
    CHECK ( ls_t001-bukrs IS NOT INITIAL ).
    SELECT * FROM knb1 INTO TABLE gt_knb1
      WHERE bukrs = ls_t001-bukrs.
    IF ( syst-subrc NE 0 ).
      MESSAGE 'No customers found' TYPE 'S'.
    ELSE.
*     Trigger PAI of dynpro '0100' and set new ok-code
      CALL METHOD cl_gui_cfw=>set_new_ok_code( 'CALL_SCREEN_0200' ).
    ENDIF.
ENDMETHOD.                    "handle_hotspot_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
REFRESH: gt_knb1.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_docking2
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_docking
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
    EXPORTING
      i_parent          = go_docking2
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_double_click FOR go_grid1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'T001'
    CHANGING
      it_outtab        = gt_t001
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
    CHANGING
      it_outtab        = gt_knb1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_docking2->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0200'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'CALL_SCREEN_0200'.
      go_grid2->refresh_table_display( ). " necessary
      CALL SCREEN '0200'.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Regards
Uwe

Is it possible to have a Summary section display above every grouped Details section in a report?

I'm trying to create a report that displays a "Summary" section above every grouped Details section.
Is this possible in SSRS? If so, what is the best way to do it?
Thanks!

Hi mmw_pdx,
In order to achieve your requirement, we can use two tables to separately display summary data and detail data. Then use a list to combine the two tables based on the Name group. For more details, please see:
Drag a table to design surface, add a group grouped by Food.
Right-click the first column to insert a column with Inside Group-Right, then insert the corresponding values.
Drag another table to design surface, insert the corresponding values.
Drag a list to design surface with current dataset, then drag the two tables in the list.
Add a group grouped by Name in the list.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Repeat "Detail a" section when using "Format with Multiple Columns" layout

I am using Crystal Reports for .NET (VS 2008) and I would like to get the "Detail a" section to repeat at top of a second column containing additional data in "Detail b" section. Please see below for example, specifically "Detail a (2)". Any tips or help much appreciated.
Detail a (1)_____Detail a (2)
Detail b (1-1)___Detail b (2-3)
Detail b (1-2)___Detail b (2-4)
--Detail b (1-3)___Detail a (3)
Detail a (2)______--Detail b (3-1)
--Detail b (2-1)
--Detail b (2-2)
Thx, Scott

the format with multiple columns i dont believe will show you the value 2x, but allows you to display the values across instead of down.
i think you may want to use a sub report

Crystal report with Details section

Dear All,
I design one Crystal report. In that can we add Details section below the Report footer.
When i add Details section it is adding below Details section like Details a and below Details b.
I want this Details b section adds below Report Footer. Can anybody suggest me how to add that is ?
Thanks and Regards

Dear Friend,
Thnks for reply. In my Crystal report i added two page header like Page header a and Page header b.
In Page header a i shows the heading of columns and in Page header b also i am showing the headin column. Coz my all columns name not fited in one Page header. Tha's y i taken two Page header.
Now i also added two Details section for takeing multiple value from database. Like Details a and Details b. But it is showing one by one.
I want to show record in details section of specific column. Like following design. Can u plz tell me how to design ?
Page header a    GCN/Invoice      GCN ...................
                            Date                 No.
Details a             11/12/2008      1
                            13/12/2008       2
.........Page header b       Destination        Tanker
                                                                  No.
         Details b                  Pune              125469
                                          Mumbai          566862
Thanks and Regards

Here's how to do ALV (OO) with dynamic fcat, int table and editable data

Hi everybody
Here's a more useful approach to ALV grid with OO using dynamic table, data NOT from DDIC, dynamic FCAT and how to get changed lines from the grid when ENTER key is pressed.
It's really not too dificult but I think this is more useful than the ever present SFLIGHT methods from the demos.
This also defines a subclass of cl_gui_alv_grid so you can access the protected attributes / methods of that class.
You don't need to add the class via SE24 -- done fron this ABAP.
When you run it click Edit for the first time.
After editing data press ENTER and the break point should bring you into the relevant method.
Code developed on NW2004S trial version but also works on rel 6.40 on a "Real" system.
The code should work without any changes on any system >=6.40.
All you need to do is to create a blank screen 100 via SE51 with a custom container on it called CCONTAINER1.
The rest of the code can just be uploaded into your system using the SE38 upload facility.
When running the program click on the EDIT button to enable the edit functionality of the grid.
Change your data and when you press ENTER you should get the break-point where you can see the original table and changed rows.
This program is actually quite general as it covers Dynamic tables, building a dynamic fcat where your table fields are NOT in the DDIC, intercepting the ENTER key via using an event, and accessing the protected attributes of the cl_gui_alv_grid by defining a subclass of this class in the abap.
I've seen various questions relating to all these functions but none in my view ever answers the questions in a simple manner. I hope this simple program will answer all these and show how using OO ALV is actually quite easy and people shouldn't be scared of using OO.
Have fun and award points if useful.
Cheers
Jimbo.
<b>PROGRAM zdynfieldcat.
Simple test of dynamic ITAB with user defined (not ddic) fields
Build dynamic fcat
use ALV grid to display and edit.
*When edit mode set to 1 toolbar gives possibility of adding and
*deleting rows.
*Define subclass of cl_gui_alv_grid so we can use protected attributes
*and methods.
Add event handler to intercept user entering data and pressing the
*ENTER key.
When enter key is pressed get actual value of NEW table (all rows)
rather than just the changed data.
*use new RTTI functionality to retrieve internal table structure
*details.
Create a blank screen 100 with a custom container called CCONTAINER1.
James Hawthorne
include <icon>.
define any old internal structure NOT in DDIC
types: begin of s_elements,
       anyfield1(20) type c,
       anyfield2(20) type c,
       anyfield3(20) type c,
       anyfield4(20) type c,
       anyfield5(11) type n,
       end of s_elements.
types: lt_rows type lvc_t_roid.
Note new RTTI functionality allows field detail retrieval
at runtime for dynamic tables.
data:   wa_element type s_elements ,
        wa_data type s_elements,
        c_index type sy-index,
        c_dec2 type s_elements-anyfield5,
        wa_it_fldcat type lvc_s_fcat,
        it_fldcat type lvc_t_fcat,
        lr_rtti_struc TYPE REF TO cl_abap_structdescr,    "RTTI
        lt_comp TYPE cl_abap_structdescr=>component_table,"RTTI
        ls_comp LIKE LINE OF lt_comp,                     "RTTI
        zog like line of lr_rtti_struc->components,      "RTTI
        struct_grid_lset type lvc_s_layo,
        l_valid type c,
        new_table type ref to data.
field-symbols: <dyn_table> type standard table,
               <actual_tab> type standard table,
               <fs1> type ANY,
               <FS2> TYPE TABLE.
data: grid_container1 type ref to cl_gui_custom_container.
class lcl_grid_event_receiver definition deferred.
data: g_event_receiver type ref to lcl_grid_event_receiver.
data: ls_modcell type LVC_S_MODI,
      stab type ref to data,
      sdog type s_elements.      .
class lcl_grid_event_receiver definition.
public section.
    methods:
    handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed,
       toolbar for event toolbar of cl_gui_alv_grid
                 importing e_object
                           e_interactive,
      user_command for event user_command of cl_gui_alv_grid
                 importing e_ucomm.
endclass.
*implementation of Grid event-handler class
class lcl_grid_event_receiver implementation.
method handle_data_changed.
code whatever required after data entry.
various possibilites here as you can get back Cell(s) changed
columns or the entire updated table.
Data validation is also possible here.
perform check_data using er_data_changed.
endmethod.
Method for handling all creation/modification calls to the toolbar
method toolbar.
    data : ls_toolbar type stb_button.
Define Custom Button in the toolbar
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EDIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Edit' to ls_toolbar-text.
    move icon_change_text to ls_toolbar-icon.
    move 'Click2Edit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'UPDA' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Update' to ls_toolbar-text.
    move icon_system_save to ls_toolbar-icon.
    move 'Click2Update' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EXIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Exit' to ls_toolbar-text.
    move icon_system_end to ls_toolbar-icon.
    move 'Click2Exit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
endmethod.
method user_command.
    case e_ucomm .
      when 'EDIT'.          "From Tool bar
        perform set_input.
         perform init_grid.
      when 'UPDA'.          "From Tool bar
        perform refresh_disp.
        perform update_table.
      when 'EXIT'.          "From Tool bar
        leave program.
    endcase.
endmethod.
endclass.
class zcltest definition inheriting from cl_gui_alv_grid.
define this as a subclass so we can access the protected attributes
of the superclass cl_gui_alv_grid
public section.
methods: constructor, disp_tab.
endclass.
need this now to instantiate object
as we are using subclass rather than the main cl_gui_alv_grid.
class zcltest implementation.
METHOD constructor.
CALL METHOD super->constructor
        exporting i_appl_events = 'X'
           i_parent = grid_container1.
endmethod.
method disp_tab.
FIELD-SYMBOLS: <outtab> TYPE STANDARD TABLE.
break-point 1.
mt_outtab is the data table held as a protected attribute
in class cl_gui_alv_grid.
ASSIGN me->mt_outtab->* TO <outtab>. "Original data
do whatever you want with <outtab>
contains data BEFORE changes each time.
Note that NEW (Changed) table has been obtained already by
call to form check_data USING P_ER_DATA_CHANGED
         TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Entered data is in table defined by <fs2>
In this method you can compare original and changed data.
Easier than messing around with individual cells.
do what you want with data in <fs2> validate / update / merge etc
endmethod.
endclass.
data :
    ok_code like sy-ucomm,
    save_ok like sy-ucomm,
    i4 type int4,
Container Object [grid_container]
now created via method constructor
in the subclass zcltest.
Control Object [grid]
grid1 type ref to zcltest,
Event-Handler Object [grid_handler]
grid_handler type ref to lcl_grid_event_receiver.
start-of-selection.
call screen 100.
module status_0100 output.
now display it as grid
if grid_container1 is initial.
    create object grid_container1
        exporting
          container_name = 'CCONTAINER1'.
    create object grid1.
     break-point 1.
    create object grid_handler.
    set handler:
       grid_handler->user_command for grid1,
       grid_handler->toolbar for grid1,
       grid_handler->handle_data_changed for grid1.
perform create_dynamic_fcat.
perform create_dynamic_itab.
perform populate_dynamic_itab.
perform init_grid.
perform register_enter_event.
set off ready for input initially
i4 = 0.
call method grid1->set_ready_for_input
         exporting
           i_ready_for_input = i4.
endif.
endmodule.
module user_command_0100 input.
*PAI not needed in OO ALV anymore as User Commands are handled as events
*in method user_command.
*we can also get control if the Data entered and the ENTER is pressed by
*raising an event.
Control then returns to method handle_data_changed.
endmodule.
form create_dynamic_fcat.
get structure of our user table for building field catalog
Use the RTTI functionality
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( wa_data ).
Build field catalog just use basic data here
colour specific columns as well
loop at lr_rtti_struc->components into zog.
c_index = c_index + 1.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype =   zog-type_kind.
wa_it_fldcat-intlen =    zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-lowercase = 'X'.
if c_index eq 2.
wa_it_fldcat-emphasize = 'C411'.
     endif.
    if c_index eq 3.
wa_it_fldcat-emphasize = 'C511'.
   endif.
append wa_it_fldcat to it_fldcat .
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to field sysmbol.
Use dynamic field catalog just built.
call method cl_alv_table_create=>create_dynamic_table
             exporting
                it_fieldcatalog = it_fldcat
             importing
                ep_table        = new_table.
assign new_table->* to <dyn_table>.
endform.
form populate_dynamic_itab.
load up a line of the dynamic table
c_dec2 = c_dec2 + 11.
wa_element-anyfield1 = 'Tabbies'.
wa_element-anyfield2 = 'ger.shepards'.
wa_element-anyfield3 = 'White mice'.
wa_element-anyfield4 = 'Any old text'.
wa_element-anyfield5 = c_dec2.
append wa_element to <dyn_table>.
endform.
form check_data USING P_ER_DATA_CHANGED
           TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Get altered data back
ASSIGN   p_er_data_changed->mp_mod_rows TO <FS1>.
stab =       p_er_data_changed->mp_mod_rows.
ASSIGN STAB->* TO <FS2>.
LOOP AT <FS2> INTO sdog.
ALV grid display with altered data is now in <fs2>.
do any extra processing you want here
endloop.
now display new table
call method grid1->disp_tab.
endform.
form exit_program.
call method grid_container1->free.
call method cl_gui_cfw=>flush.
leave program.
endform.
form refresh_disp.
call method grid1->refresh_table_display.
endform.
form update_table.
The dynamic table here is the changed table read from the grid
after user has changed it
Data can be saved to DB or whatever.
loop at <dyn_table> into wa_element.
do what you want with the data here
endloop.
switch off edit mode again for next function
i4 = 0.
call method grid1->set_ready_for_input
      exporting
          i_ready_for_input = i4.
endform.
form set_input.
i4 = 1.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form switch_input.
if i4 = 1.
i4 = 0.
else.
i4 = 1.
endif.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form init_grid.
Enabling the grid to edit mode,
     struct_grid_lset-edit = 'X'. "To enable editing in ALV
     struct_grid_lset-grid_title = 'Jimbos Test'.
     call method grid1->set_table_for_first_display
       exporting
         is_layout           = struct_grid_lset
       changing
         it_outtab             = <dyn_table>
         it_fieldcatalog       = it_fldcat.
endform.
form register_enter_event.
call method grid1->register_edit_event
               exporting
                  i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Instantiate the event or it won't work.
create object g_event_receiver.
set handler g_event_receiver->handle_data_changed for grid1.
endform.</b>

Hi there
IE7 doesn't give me the add new page option and I get 404 error when trying to access the "How to contribute" section.
I'll load up Firefox later (this browser usually works when IE7 doesn't always work properly).
I'll copy the stuff to the wiki when I've got the browser sorted out.
Cheers
jimbp

Summary section in 2 Pages

Hi All
Using Section break next page to print Summary section in last page with different headers and footers(used MS Footer) when summary section prints in 1 page then it's fine but sumary section displays in 2 pages then header and footer goes for a task
Is there anyother way to fix this issue
Thanks
Kamalakar.G

Hi kavipriya
given below structure of rtf template first page and second page
In First page
In Header registering Sub templates
<?import:xdo://SDS.SDSCNSCOMBVADDR.en.00?> <?import:xdo://SDS.SDSCNSCOMLGADDR.en.00?> <?
import:xdo://SDS.SDSCNSCOMLGADDRSP.en.00?> <?call@inlines:header?>
and before header
<?template:header?> <?initial-page-number:'auto'?>
header details (including sub template)
<?end template?>
<?for-each@section:G_ORDER?>
<?for-each:G_LINES?>
line details
<?end for-each?>
<?ORDER_NOTE?> <?end for-each?>
then footer
In Second page
using section break (type:next page)
Header details (including sub templates)
<?for-each://G_TRIP_TRIP_ID?>
<?end for-each?>
Total
Footer section
Issue when summary section goes to 2 pages header and footer are going for task
Thanks
Kamalakar.G

Report Row With Detail (AJAX) by Carl - How to implement?

I just had a look at Carl's example place and I'd like to implement his Report Row With Detail feature. But how, it's made up of 3 sections:
1. a query
2. javascript
3. application process
The query on which the report is based and where I want this feature is:
select leverancier, artnr, vendorcode from plijst where productgroep = :p1_assortiment_tree or subgroep = :p1_assortiment_tree
A break is defined on Leverancier
I understand the query and the application process part. But where goes the Java part???
Peter
Message was edited by:
Pete

Tried to upload your example application, unfortunately it does not seem to upload properly in my APEX v2.0 environment
Can you please confirm if your example works with APEX version 2
and does the Javascript go in the Page Header or Region Header/ Footer area
thankyou
Frank

Report Row With Detail (IFRAME) - How to reload Main Page within iFrame

Hi,
Based on Carl's example - Report Row With Detail (IFRAME), i.e:
http://htmldb.oracle.com/pls/otn/f?p=11933:17
Within my scenario, I have a button within the iframe section of my report that calls a pl/sql process that performs some database processing.
What I basically need is a means of performing a page refresh of the main page, when this button within the iframe is pressed. In Carl's example, that would be page 17.
As mentioned, I call a PL/SQL process within the iframe, but unsure how to then refresh the main page - parent page.
Any help would be appreciated.
Thanks.
Tony.

Tony,
you could insert the following script to the region footer of a region located on your "iframe"-page.
<script>
parent.location.reload();
</script>
But this is dangerous because everytime the parent is being reloaded, the iframe is loaded, too. Risk of loop...
A possible solution is to conditionally display a html region (with the script) on your iframe-page basing on a request. You could post the request as a result after your plsql processing in a branch.
Regards,
Jens

Issue with displaying summary in the Page Bottom

Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
Subbarao

HI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh

OO ALV grid with a header line is this possible?

Howdy!
I have a requirement where I need to produce an ALV grid with the following format:
<b>Text 1     Text 2 Text 3                  Text 4
                          Text 6
Col_1 Col_2 Col_3 Col_4 Col_5 Col_6 Col_7 Col_8 Col_9
Cell conents -
Cell conents -
Cell conents -
Cell conents -
Cell conents -
</b>
Anyone got any idea on how to get the 'TEXT' fields into the ALV grid? These are dynamic texts that would basically display details of data entered in the selection screen.
The ALV title line is limited to 70 characters and I can't think of another way of doing this.
The texts need to appear on the ALV grid becasue the user would like to download them to Excel in addition to the ALV cell contents using the standard ALV functionality.
Any ideas would be appreciated!
Message was edited by: Robert

I'm thinking that this may not work because it is not a full screen grid and the grid container does not care about the container on top of it so, it most likely would not print it.   Implement this example program, you can see how this would work for you if you were using the FM.
report zrich_0001
       no standard page heading.
* Global ALV Data Declarations
type-pools slis.
data: begin of i_alv occurs 0,
      matnr type mara-matnr,
      end of i_alv.
* Miscellanous Data Declarations
data: fieldcat type slis_t_fieldcat_alv,
      events   type slis_t_event,
      list_top_of_page type slis_t_listheader,
      top_of_page type slis_formname value 'TOP_OF_PAGE'.
start-of-selection.
perform initialization.
perform get_data.
perform call_alv.
end-of-selection.
* Form Initialization
form initialization.
clear i_alv.       refresh i_alv.
perform eventtab_build using events[].
endform.
* Form Get_Data
form get_data.
select matnr into table i_alv
              from mara up to 100 rows.
endform.
* CALL_ALV
form call_alv.
data: variant type disvariant.
data: repid type sy-repid.
repid = sy-repid.
variant-report = sy-repid.
variant-username = sy-uname.
perform build_field_catalog.
perform comment_build using list_top_of_page[].
* Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat        = fieldcat
            i_callback_program = repid
            is_variant         = variant
            it_events          = events[]
            i_save             = 'U'
       tables
            t_outtab           = i_alv.
endform.
* EVENTTAB_BUILD
form eventtab_build using events type slis_t_event.
* Registration of events to happen during list display
data: tmp_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
       exporting
            i_list_type = 0
       importing
            et_events   = events.
read table events with key name = slis_ev_top_of_page
                           into tmp_event.
if sy-subrc = 0.
    move top_of_page to tmp_event-form.
    append tmp_event to events.
endif.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
clear: fieldcat. refresh: fieldcat.
data: tmp_fc type slis_fieldcat_alv.
tmp_fc-reptext_ddic = 'Material'.
tmp_fc-fieldname    = 'MATNR'.
tmp_fc-tabname      = 'I_ALV'.
tmp_fc-outputlen    = 18.
append tmp_fc to fieldcat.
endform.
* COMMENT_BUILD
form comment_build using list_top_of_page type
                                        slis_t_listheader.
data: tmp_line type slis_listheader.
clear tmp_line.
tmp_line-typ = 'H'.
tmp_line-info = 'Here is a line of text'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key1'.
tmp_line-info = 'Here is a value'.
append tmp_line to list_top_of_page.
clear tmp_line.
tmp_line-typ = 'S'.
tmp_line-key = 'Key2'.
tmp_line-info = 'Here is another value'.
append tmp_line to list_top_of_page.
endform.
* TOP_OF_PAGE
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            i_logo             = 'ENJOYSAP_LOGO'
            it_list_commentary = list_top_of_page.
endform.
Regards,
Rich Heilman

Opening a form with detail information

Hi all,
i have create a matrix contain all Draft is Open and i make double click event on row to view detail form.
If omatrix.IsRowSelected(i) = True Then
                            Dim Docnum As Integer = omatrix.Columns.Item(1).Cells.Item(pVal.Row).Specific.value
                            Dim Doctype As String = omatrix.Columns.Item(2).Cells.Item(pVal.Row).Specific.value
                            Select Case Doctype
                                Case "Sale Order"
                                    'open Sales order Form on Docnum with detail information
                                Case "Delivery"
                                    'open Delivery Form on Docnum with detail information
                            End Select
                        End If
+ please show me how to open exactly form which i want to open
+ how to format an column in matrix is currency.
+ how to make total in the end of column.
Sympathize for my English.
Thanks.

Hi
If you are using SAP Business One PL 19 or above you can try the following for opening a form
Dim formType As SAPbouiCOM.BoFormObjectEnum
            'default: fo_None
            Dim strUDOObjectType As String
            Dim strObjectKey As String
            'For UDO objects, set the system form enum to be "fo_UserDefinedObject" at first.
            formType = BoFormObjectEnum.fo_UserDefinedObject
            strUDOObjectType = "myUDO"
            'UDO type
            strObjectKey = "udoKey"
            'Code
            Dim oForm As SAPbouiCOM.Form = oApp.OpenForm(formType, strUDOObjectType, strObjectKey)
            'For system objects. set system form enum for "BusinessPartners" at first.
            formType = BoFormObjectEnum.fo_BusinessPartner
            strUDOObjectType = "testUDO"
            'Will be ignored in this case.
            strObjectKey = "C00001"
            'primary key of "BusinessPartners" object.
            oForm = oApp.OpenForm(formType, strUDOObjectType, strObjectKey)
            If oForm Is Nothing Then
                'No form opened with the input parameters, add your own logics here...
            Else
                'Form opened successfully, do your own work here...
            End If
Summary Column is available in 8.81 only
Hope this helps
Regards
Arun

ALV report with dynamic columns, and repeated structure rows

Hey Guys,
I've done some ALV programming, but most of the reports were straight forward. This one is a little interesting. So here go the questions...
Q1: Regarding Columns:
What is the best way to code a report with columns being dynamic. This is one of the parameters the user is going to enter in his input.
Q2: Regarding Rows:
I want to repeat a structure(say it contains f1, f2, f3) multiple time in rows. What is the best way to do it? The labels for these fields have to appear in the first column.
Below is the visual representation of the questions.
Jan 06 , Feb 06, Mar 06....(dynamic)
   material 1
Current Stock
current required
$Value of stock
   material 2
Current Stock
current required
$Value of stock
   material 3
Current Stock
current required
$Value of stock
Thanks for your help.
Sumit.

Hi Sumit,
Just check this sample from one of the SAP site
ABAP Code Sample for Dynamic Table for ALV with Cell Coloring
Applies To:
ABAP / ALV Grid
Article Summary
ABAP Code Sample that uses dynamic programming techniques to build a dynamic internal table for display in an ALV Grid with Cell Coloring.
Code Sample
REPORT zcdf_dynamic_table.
* Dynamic ALV Grid with Cell Coloring.
* Build a field catalog dynamically and provide the ability to color
* the cells.
* To test, copy this code to any program name and create screen 100
* as described in the comments. After the screen is displayed, hit
* enter to exit the screen.
* Tested in 4.6C and 6.20
* Charles Folwell - [email protected] - Feb 2, 2005
DATA:
r_dyn_table TYPE REF TO data,
r_wa_dyn_table TYPE REF TO data,
r_dock_ctnr TYPE REF TO cl_gui_docking_container,
r_alv_grid TYPE REF TO cl_gui_alv_grid,
t_fieldcat1 TYPE lvc_t_fcat, "with cell color
t_fieldcat2 TYPE lvc_t_fcat, "without cell color
wa_fieldcat LIKE LINE OF t_fieldcat1,
wa_cellcolors TYPE LINE OF lvc_t_scol,
wa_is_layout TYPE lvc_s_layo.
FIELD-SYMBOLS:
<t_dyn_table> TYPE STANDARD TABLE,
<wa_dyn_table> TYPE ANY,
<t_cellcolors> TYPE lvc_t_scol,
<w_field> TYPE ANY.
START-OF-SELECTION.
* Build field catalog based on your criteria.
wa_fieldcat-fieldname = 'FIELD1'.
wa_fieldcat-inttype = 'C'.
wa_fieldcat-outputlen = '10'.
wa_fieldcat-coltext = 'My Field 1'.
wa_fieldcat-seltext = wa_fieldcat-coltext.
APPEND wa_fieldcat TO t_fieldcat1.
wa_fieldcat-fieldname = 'FIELD2'.
wa_fieldcat-inttype = 'C'.
wa_fieldcat-outputlen = '10'.
wa_fieldcat-coltext = 'My Field 2'.
wa_fieldcat-seltext = wa_fieldcat-coltext.
APPEND wa_fieldcat TO t_fieldcat1.
* Before adding cell color table, save fieldcatalog to pass
* to ALV call. The ALV call needs a fieldcatalog without
* the internal table for cell coloring.
t_fieldcat2[] = t_fieldcat1[].
* Add cell color table.
* CALENDAR_TYPE is a structure in the dictionary with a
* field called COLTAB of type LVC_T_SCOL. You can use
* any structure and field that has the type LVC_T_SCOL.
wa_fieldcat-fieldname = 'T_CELLCOLORS'.
wa_fieldcat-ref_field = 'COLTAB'.
wa_fieldcat-ref_table = 'CALENDAR_TYPE'.
APPEND wa_fieldcat TO t_fieldcat1.
* Create dynamic table including the internal table
* for cell coloring.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fieldcat1
IMPORTING
ep_table = r_dyn_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Get access to new table using field symbol.
ASSIGN r_dyn_table->* TO <t_dyn_table>.
* Create work area for new table.
CREATE DATA r_wa_dyn_table LIKE LINE OF <t_dyn_table>.
* Get access to new work area using field symbol.
ASSIGN r_wa_dyn_table->* TO <wa_dyn_table>.
* Get data into table from somewhere. Field names are
* known at this point because field catalog is already
* built. Read field names from the field catalog or use
* COMPONENT <number> in a DO loop to access the fields. A
* simpler hard coded approach is used here.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'ABC'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'XYZ'.
APPEND <wa_dyn_table> TO <t_dyn_table>.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'TUV'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
<w_field> = 'DEF'.
APPEND <wa_dyn_table> TO <t_dyn_table>.
* Color cells based on your criteria. In this example, a test on
* FIELD2 is used to decide on color.
LOOP AT <t_dyn_table> INTO <wa_dyn_table>.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table> TO <w_field>.
* Get access to internal table used to color cells.
ASSIGN COMPONENT 'T_CELLCOLORS'
OF STRUCTURE <wa_dyn_table> TO <t_cellcolors>.
CLEAR wa_cellcolors.
wa_cellcolors-fname = 'FIELD2'.
IF <w_field> = 'DEF'.
wa_cellcolors-color-col = '7'.
ELSE.
wa_cellcolors-color-col = '5'.
ENDIF.
APPEND wa_cellcolors TO <t_cellcolors>.
MODIFY <t_dyn_table> FROM <wa_dyn_table>.
ENDLOOP.
* Display screen. Define screen 100 as empty, with next screen
* set to 0 and flow logic of:
* PROCESS BEFORE OUTPUT.
* MODULE initialization.
* PROCESS AFTER INPUT.
CALL SCREEN 100.
* MODULE initialization OUTPUT
MODULE initialization OUTPUT.
* Set up for ALV display.
IF r_dock_ctnr IS INITIAL.
CREATE OBJECT r_dock_ctnr
EXPORTING
side = cl_gui_docking_container=>dock_at_left
ratio = '90'.
CREATE OBJECT r_alv_grid
EXPORTING i_parent = r_dock_ctnr.
* Set ALV controls for cell coloring table.
wa_is_layout-ctab_fname = 'T_CELLCOLORS'.
* Display.
CALL METHOD r_alv_grid->set_table_for_first_display
EXPORTING
is_layout = wa_is_layout
CHANGING
it_outtab = <t_dyn_table>
it_fieldcatalog = t_fieldcat2.
ELSE. "grid already prepared
* Refresh display.
CALL METHOD r_alv_grid->refresh_table_display
EXPORTING
i_soft_refresh = ' '
EXCEPTIONS
finished = 1
OTHERS = 2.
ENDIF.
ENDMODULE. " initialization OUTPUT
Regards
vijay

How to filter standard ALV report with custom UI element?

Hello Expert,
I got a requirement to filter standard ALV report based on the custom UI element (which is created in the screen before displaying the ALV report). Upon entering the values in the Custom field, the ALV report is displayed accordingly.
Any ideas how to approach it?
Thanks,
Mohammed

Hi,
Okay, let me explain the steps in detail
Let us say you have alv table with 10 records and alv table is shown first time with all 10 records
Create an internal table in component controller's attribute GT_ORIGINAL_DATA and save all 10 records into this table first time
Now, user enters value in FILTER_MATNR field 123 and press apply_filter button or press enter key
Read the value of field filter_matnr and get the only matching records from global internal table GT_ORIGINAL_DATA into local internal table as below
          data lv_matnr type matnr.
          data lt_data   like wd_comp_controller->gt_original_data.
               " read the value from context attribute of filter_matnr
                    lv_matnr = ???
               " copy all data into local table
                    lt_data[] = wd_comp_controller->gt_original_data.
               "delete the records which does not match
                 delete lt_data where matnr NP lv_matnr.
Now, bind the data lt_data to context node of alv table
Hope this helps you.
Regards,
Rama

Group totals summary in another group summary section

I have a report requirements that need to re-display the group total in a summary section. Please see below simple example. The second summary does not have fixed number of Units, it depends how many units are in each Department.
I am not able to reproduce the department summary. Is this possible in SSRS, I can do this in crystal?
Example:
Department ABC Unit 100
details line here....
Unit 100 totals here
Unit 120
details line here.....
Unit 120 totals here
Unit 140.......
Department ABC summary
Unit 100 total
Unit 120 total
Unit 140 total
Department XYZ
Unit .................
Department XYZ summary
unit totals.................... (one to many)
Final Summary
Department ABC total
Department XYZ total
Jim Pan

Hi Jim,
In your case, we can work around the issue in SSRS. Suppose we have a dataset (DataSet1) include following fields: Department, Unit, Amount. Please refer to the following steps:
Add a table in the report body. Please refer to the table structure below:
Parent Group: Department
Child Group: Unit
Data: Amount
Click the blank arrow of (Details) in the Row Groups dialog box. Click Add Total.
Use the same method add total to the Unit and Department group.
There is a screenshot for your reference:
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Alv FRID with detail & summary sections

Similar Messages

Maybe you are looking for