ALV interactive drill down report

Hi,
I have a requirement to display the header details on an ALV report
date -- level1level2level3...level4
Here level1,2,3,4 contains the counts of item details based on level
Now i need to display second drill down report, when user clicks on specific cell for levels.
e.g.,
when user clicks on count for level2, i need to show drill down report for level2 items for that date.
Can any one give me some ideas for this ALV report...
THanks in advance.
points will be awarded immediately

If you need to know how to do drill down, here is an example program.
report zrich_0001.
* Global ALV Data Declarations
type-pools: slis.
* Internal Tables
data: begin of itab occurs 0,
      matnr type mara-matnr,
      maktx type makt-maktx,
      end of itab.
start-of-selection.
perform get_data.
perform call_alv.
*      Form GET_DATA
form get_data.
select mara~matnr makt~maktx
          into corresponding fields of table itab
               from mara
                 inner join makt
                  on mara~matnr = makt~matnr
                             up to 20 rows.
endform.
* CALL_ALV
form call_alv.
data: ifc type slis_t_fieldcat_alv.
data: xfc type slis_fieldcat_alv.
data: repid type sy-repid.
repid = sy-repid.
clear xfc. refresh ifc.
clear xfc.
xfc-reptext_ddic = 'Material Number'.
xfc-fieldname    = 'MATNR'.
xfc-tabname      = 'ITAB'.
xfc-outputlen    = '18'.
append xfc to ifc.
clear xfc.
xfc-reptext_ddic = 'Material Description'.
xfc-fieldname    = 'MAKTX'.
xfc-tabname      = 'ITAB'.
xfc-outputlen    = '40'.
append xfc to ifc.
* Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = repid
            i_callback_user_command = 'HANDLE_USER_COMMAND'
            it_fieldcat             = ifc
       tables
            t_outtab                = itab.
endform.
*       FORM handle_User_Command                                      *
form handle_user_command using r_ucomm     like sy-ucomm
                               rs_selfield type slis_selfield.
case r_ucomm.
    when '&IC1'.
    case rs_selfield-FIELDNAME.
      when 'MATNR'.
         set parameter id 'MAT' field rs_selfield-value.
         call transaction 'MD04' and skip first screen.
      endcase.
endcase.
endform.
Regards,
Rich Heilman

Similar Messages

Hiding fields in ALV DRILLED DOWN REPORT

Hi
My scenario is like this i created a alv drilled down report , in that once the user executes it ,it will displays the header contents of the purchase order.
If the user double clicks on any of the header line item it will displays the item detials of the particular header data..
My probelm is if i double click it i am getting the header details added with the item fields..i want to hide the header detials if i want to c the item level details..
Can any suggest me some better ways to hide the header contents ??
Arun Joseph

hi,
check ur field cat...
R u using same name?
If possible paste ur code here...

What is the difference in Interactive reports and Drill down reports?

What is the difference in Interactive reports and Drill down reports? Are they same?

Hi FRD ,
Both are same .
as far as i know there is no difference .
bye .

Difference between Drill down Report and Interactive Report

What is the difference between Drill down Report and Interactive Report?

Hi,
Drill down report and Interactive report seems to be acts as same. But there is a minor difference between those two.
Drill Down Report - When you click on a particular field in a report it drills down to the next report, it won't trigger another screen.
Interactive Report - When you click on a particular field in a report it will trigger another report based on the field clicked. It opens another session internally in the same screen.
Regards,
Jayaram...

Drill down report in ALV

Hi Friends,
i am developing drill down report by using REUSE_ALV_GRID_DISPLAY FM. it is working fine for ME23N transaction. here parameter id is BES. for that i am using following syntax.
set parameter id 'BES' field <clicked field value>
call transaction 'ME23N' and skip first screen.
Now, same for scheduling agreement ME33L, Here parameter id is VRT. but here clicked value is not populating in ME33L transaction field. I think here parameter id should be different.
Does anybody have an any idea? please let me know.
Thanks in advance,
Parag

Hi Parag!
I am encountering the same problem with you.
Here's my code and as you've said..its working in ME23N but not in ME33L.
FORM ebeln USING selfield_value LIKE v_selfield-value.
DATA: l_bstyp TYPE c.
READ TABLE i_output INTO x_output with key ebeln = selfield_value.
l_bstyp = x_output-bstyp.
IF l_bstyp = c_f.
SET PARAMETER ID 'BES' FIELD selfield_value.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
IF sy-subrc = 0.
do nothing.
ENDIF.
ELSEIF l_bstyp = c_l.
SET PARAMETER ID 'VRT' FIELD selfield_value.
CALL TRANSACTION 'ME33L' AND SKIP FIRST SCREEN.
IF sy-subrc = 0.
do nothing.
ENDIF.
ENDIF.
ENDFORM. " EBELN
Have you resolved the problem?

How to make output of ABAp query interactive(drill down)..?

Hi All,
I have developed one ABAP query which shows the output in which there is a coloumm 'order number'.
I want to make this coloumn interactive ,that means after double clicking on any row of this colomn ,it should go to transaction KO02.
Where do i have to write the code in ABAP query ?
I am very new to ABAP query..this is the first query i have deloped till now.
points will be rewarded.
Thnks in advance.
Regards,
Sanjay.

The below sample code is one such example of Drill down reporting...
Make the necessary modifications, change the statement CALL TRANSACTION to whatever you want to CALL. Proceed further.
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
 " document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
 EBELN(90) TYPE C, " Purchase Document Number
 ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
 " the Object
 LIFNR TYPE EKKO-LIFNR, " Vendor's account number
 EKGRP TYPE EKKO-EKGRP, " Purchasing group
 BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
 EBELN TYPE EKKO-EBELN, " Purchasing Document Number
 ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
 " Object
 LIFNR TYPE EKKO-LIFNR, " Vendor's account number
 EKGRP TYPE EKKO-EKGRP, " Purchasing group
 BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
 LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
 NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
 OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
 OBJECTID TYPE CDHDR-OBJECTID, " Object value
 CHANGENR TYPE CDHDR-CHANGENR, " Document change number
 USERNAME TYPE CDHDR-USERNAME, " User name
 UDATE TYPE CDHDR-UDATE, " Creation date of the change
 " document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
 OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
 OBJECTID(10) TYPE C, " Object Value
 CHANGENR TYPE CDPOS-CHANGENR, " Document change number
 TABNAME TYPE CDPOS-TABNAME, " Table Name
 FNAME TYPE CDPOS-FNAME, " Field Name
 VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
 VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
 TABNAME TYPE DD03L-TABNAME, " Table Name
 FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
 ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
 ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
 DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
 " Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
 EBELN TYPE EKKO-EBELN, " Purchasing Document Number
 ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
 " Object
 LIFNR TYPE EKKO-LIFNR, " Vendor's account number
 EKGRP TYPE EKKO-EKGRP, " Purchasing group
 BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
 WERKS TYPE LFA1-WERKS, " Plant
 NAME1 TYPE LFA1-NAME1, " Name1
 USERNAME TYPE CDHDR-USERNAME, " User name
 UDATE TYPE CDHDR-UDATE, " Creation date of the change
 " document
 DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
 " Repository Objects
 VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
 VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
 OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
 OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
 OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
 OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
 OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
 OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
 OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
 OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
 OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
 OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
 OF FS_OUTTAB.
 C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
 W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
 W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
 W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
 W_VALUE TYPE EKKO-EBELN, " Reflected Value
 W_SPACE VALUE ' ', " Space
 W_FLAG TYPE I, " Flag Variable
 W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
 W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
 W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
 T_FIELDCAT TYPE LVC_T_FCAT.
 AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
 START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
 PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
 PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
 PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
 PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
 PERFORM DESCRIPTION.
 END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
 PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
 PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
 CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
 METHODS:
 HANDLE_HOTSPOT_CLICK
 FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
 IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
 PERFORM GET_CELL_INFO.
 SET PARAMETER ID 'BES' FIELD W_VALUE.
 CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
 PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
 CREATE OBJECT W_GRID
 EXPORTING
 I_SHELLSTYLE = 0
 I_LIFETIME =
 I_PARENT = CL_GUI_CONTAINER=>SCREEN0
 I_APPL_EVENTS =
 I_PARENTDBG =
 I_APPLOGPARENT =
 I_GRAPHICSPARENT =
 I_NAME =
 I_FCAT_COMPLETE = SPACE
 EXCEPTIONS
 ERROR_CNTL_CREATE = 1
 ERROR_CNTL_INIT = 2
 ERROR_CNTL_LINK = 3
 ERROR_DP_CREATE = 4
 OTHERS = 5.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF. " IF SY-SUBRC <> 0
 CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 I_BUFFER_ACTIVE =
 I_BYPASSING_BUFFER =
 I_CONSISTENCY_CHECK =
 I_STRUCTURE_NAME =
 IS_VARIANT = W_VARIANT
 I_SAVE = 'A'
 I_DEFAULT = 'X'
 IS_LAYOUT =
 IS_PRINT =
 IT_SPECIAL_GROUPS =
 IT_TOOLBAR_EXCLUDING =
 IT_HYPERLINK =
 IT_ALV_GRAPHICS =
 IT_EXCEPT_QINFO =
 IR_SALV_ADAPTER =
 CHANGING
 IT_OUTTAB = T_OUTTAB
 IT_FIELDCATALOG = T_FIELDCAT
 IT_SORT =
 IT_FILTER =
 EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 OTHERS = 4
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
 Subroutine to build the Field catalog
 <--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
 SELECT EBELN " Purchasing Document Number
 ERNAM " Name of Person who Created
 " the Object
 LIFNR " Vendor's account number
 EKGRP " Purchasing group
 BEDAT " Purchasing Document Date
 FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
 WHERE EBELN IN S_EBELN
 AND BEDAT IN S_BEDAT.
 ENDSELECT.
IF SY-SUBRC NE 0.
 W_FLAG = 1.
 MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
 SELECT OBJECTCLAS " Object Class
 OBJECTID " Object value
 CHANGENR " Document change number
 USERNAME " User name
 UDATE " Creation date
 FROM CDHDR
 INTO TABLE T_CDHDR
 FOR ALL ENTRIES IN T_EBELN
 WHERE OBJECTID EQ T_EBELN-EBELN
 AND UDATE IN S_UDATE
 AND TCODE IN ('ME21N','ME22N','ME23N').
 ENDSELECT.
 IF SY-SUBRC NE 0.
 W_FLAG = 1.
 MESSAGE S833(M8) WITH 'Header Not Found'(031).
 ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
 SELECT OBJECTCLAS " Object class
 OBJECTID " Object value
 CHANGENR " Document change number
 TABNAME " Table Name
 FNAME " Field Name
 VALUE_NEW " New contents of changed field
 VALUE_OLD " Old contents of changed field
 FROM CDPOS
 PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
 FOR ALL ENTRIES IN T_CDHDR
 WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
 AND OBJECTID EQ T_CDHDR-OBJECTID
 AND CHANGENR EQ T_CDHDR-CHANGENR.
 ENDSELECT.
 IF SY-SUBRC NE 0.
 W_FLAG = 1.
 MESSAGE S833(M8) WITH 'Item Not Found'(032).
 ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
 Subroutine to select Purchase Order Details
 There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
 SORT T_EBELN BY EBELN.
 LOOP AT T_CDPOS INTO FS_CDPOS.
 READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
 FS_CDPOS-OBJECTID BINARY SEARCH.
 IF SY-SUBRC NE 0.
 DELETE TABLE T_EBELN FROM FS_EBELN.
 ENDIF. " IF SY-SUBRC NE 0.
 ENDLOOP. " LOOP AT T_CDPOS...
 LOOP AT T_EBELN INTO FS_EBELN.
 MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
 MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
 MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
 MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
 MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
 APPEND FS_EKKO TO T_EKKO.
 ENDLOOP. " LOOP AT T_EBELN...
 T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
 SORT T_EKKO_TEMP BY LIFNR.
 DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
 SELECT LIFNR " Account Number of Vendor or
 " Creditor
 NAME1 " Name 1
 FROM LFA1
 INTO TABLE T_LFA1
 FOR ALL ENTRIES IN T_EKKO_TEMP
 WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
 IF SY-SUBRC NE 0.
 MESSAGE S002(M8) WITH 'Master Details'(033).
 ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
 SORT T_CDPOS_TEMP BY TABNAME FNAME.
 DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
 SELECT TABNAME " Table Name
 FIELDNAME " Field Name
 ROLLNAME " Data element
 FROM DD03L
 INTO TABLE T_DATAELE
 FOR ALL ENTRIES IN T_CDPOS_TEMP
 WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
 AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
 IF NOT T_DATAELE IS INITIAL.
 T_DATAELE_TEMP[] = T_DATAELE[].
 SORT T_DATAELE_TEMP BY ROLLNAME.
 DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
 SELECT ROLLNAME " Data element
 DDTEXT " Short Text Describing R/3
 " Repository Objects
 FROM DD04T
 INTO TABLE T_TEXT
 FOR ALL ENTRIES IN T_DATAELE_TEMP
 WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
 AND DDLANGUAGE EQ SY-LANGU.
 IF SY-SUBRC NE 0.
 EXIT.
 ENDIF. " IF SY-SUBRC NE 0.
 ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
 READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
 OBJECTCLAS = FS_CDPOS-OBJECTCLAS
 OBJECTID = FS_CDPOS-OBJECTID
 CHANGENR = FS_CDPOS-CHANGENR
 BINARY SEARCH.
 IF SY-SUBRC EQ 0.
 MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
 MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
 READ TABLE T_EKKO INTO FS_EKKO WITH KEY
 EBELN = FS_CDHDR-OBJECTID
 BINARY SEARCH.
 IF SY-SUBRC EQ 0.
 MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
 MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
 MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
 MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
 MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
 READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
 LIFNR = FS_EKKO-LIFNR
 BINARY SEARCH.
 IF SY-SUBRC EQ 0.
 MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
 ENDIF. " IF SY-SUBRC EQ 0.
 ENDIF. " IF SY-SUBRC EQ 0.
 ENDIF. " IF SY-SUBRC EQ 0.
 MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
 MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
 READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
 TABNAME = FS_CDPOS-TABNAME
 FIELDNAME = FS_CDPOS-FNAME
 BINARY SEARCH.
 IF SY-SUBRC EQ 0.
 READ TABLE T_TEXT INTO FS_TEXT WITH KEY
 ROLLNAME = FS_DATAELE-ROLLNAME
 BINARY SEARCH.
 IF SY-SUBRC EQ 0.
 MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
 ENDIF. " IF SY-SUBRC EQ 0.
 ENDIF. " IF SY-SUBRC EQ 0.
 APPEND FS_OUTTAB TO T_OUTTAB.
 CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
 Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
 IMPORTING
 E_ROW =
 E_VALUE = W_VALUE
 E_COL =
 ES_ROW_ID =
 ES_COL_ID =
 ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
 Subroutine to validate Purchase Document Number
 There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
 SELECT EBELN " Purchase Document Number
 FROM EKKO
 INTO W_EBELN
 UP TO 1 ROWS
 WHERE EBELN IN S_EBELN.
 ENDSELECT.
 IF SY-SUBRC NE 0.
 CLEAR SSCRFIELDS-UCOMM.
 MESSAGE E717(M8).
 ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
 Subroutine to validate Vendor Number
 There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
 SELECT LIFNR " Vendor Number
 FROM LFA1
 INTO W_LIFNR
 UP TO 1 ROWS
 WHERE LIFNR IN S_LIFNR.
 ENDSELECT.
 IF SY-SUBRC NE 0.
 CLEAR SSCRFIELDS-UCOMM.
 MESSAGE E002(M8) WITH W_SPACE.
 ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
 Subroutine to validate the Purchase Group
 There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
 SELECT EKGRP " Purchase Group
 FROM T024
 INTO W_EKGRP
 UP TO 1 ROWS
 WHERE EKGRP IN S_EKGRP.
 ENDSELECT.
 IF SY-SUBRC NE 0.
 CLEAR SSCRFIELDS-UCOMM.
 MESSAGE E622(M8) WITH W_SPACE.
 ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
Regards,
Pavan

Drill down report...

HI abapers,
How to create drill down report in alv.
When i double click the particular field, another report has to pop up and display the details of that particular field.
for eg,
When double click the amount spent field other report has to say, For which material the amonut has spend.
Thanking You
arvind

hi arv,
for me your scenario is not clear..
you want to drill down the alv .. and show the report in the same program or you want to call another program when u try to hit the alv report..
well for drilling down the same program.. you can use the following method
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_INTERFACE_CHECK                 = ' '
    I_BYPASSING_BUFFER                = ' '
    I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                 = GV_REPID
    I_CALLBACK_PF_STATUS_SET          = ' '
     I_CALLBACK_USER_COMMAND            = 'TOP1'     " drill down
     I_CALLBACK_TOP_OF_PAGE             = 'TOP2'
    I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
FORM TOP1 USING UCOMM TYPE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
READ TABLE GT_FINAL_TOTAL INTO GS_FINAL INDEX SELFIELD-TABINDEX.
CASE SELFIELD-TABINDEX.
WHEN SELFIELD-TABINDEX.
perfrom itab2_operation. " in this form you will write the code to get the data for drill dispplay
now defing fieldcatalog again : example :
    GS_FCAT-COL_POS = 1.
    GS_FCAT-FIELDNAME = 'EBELN'.
    GS_FCAT-SELTEXT_L = TEXT-001.
    GS_FCAT-FIX_COLUMN = 'X'.
    GS_FCAT-OUTPUTLEN = 13.
    APPEND GS_FCAT TO GT_FCA
and call alv display again :
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
    I_CALLBACK_PROGRAM                = GV_REPID
I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_TOP_OF_PAGE            = 'TOP2'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      = ''
I_GRID_SETTINGS                   =
    IS_LAYOUT                         = GS_LAYOUT
      IT_FIELDCAT                     = GT_FCAT
and if you want to call another progam when u hit..u have to use..submit key work
like SUBMIT ZAFI013R VIA SELECTION-SCREEN AND RETURN.

Drill Down Report in screen painter

Hi Experts,
I have a requirement in dialog programming/screen painter to create a 2 level drill down report. for eac page of the report, it should only contain 10 entries then to view the other entries (11 and up), the button for next page should be click (there is also back button).
First question is how will I have the drill down report (alv list type?) in screen painter?
Second question is how should I process the logic mentioned above (next and back) in screen painter/dialog programming?
Thanks in advance for all teh support. Points will be rewarded.
Cheers,
Kurtt

Hai,
Go thru this Threads u ll get an idea,
Drill down report help
Re: regarding Drill Down Reporting
drill down capabilities for an alv grid display field using oops concept
Regards,
Padmam.

How to get the output data of Standard drill down report into z-program?

HI every one,
        I want to get the output data of drill down report into z-program.
       Actually,if the output is only one, I can get into z-program,
      But, Here the report consists 3 alv outputs. when double clicking function happens, it will direct to another alv output.
    Those, all the outputs of report i want to get into z-program.
PLease , give reply as early as possible.
Thank u in advance,
karthik

HI,
When i download,only one output i will get.
But,if i double-click the particular record it will show another output. I want that output also.
Like that,when i double-click particular record, it will show some other alv ouput based on record,
i wanted all those outputs.
If i copy the code, whether i face any problems?

Use different Layouts for Summary and Details in Drill down report

Hi All,
I have a 2 level drill down report in ALV.
The summary report has certain fields and the Detail report has different fields. Now my problem is that when i use a default layout (with all fields of summary report) for the summary report, and drill down to the detail report i'm missing the fields on detail that are not in Summary. And if i save the default layout as default (with all fields of Detail) and go back to sumary, I'm missing the some other fields on summary (which are not on detail report).
Is there a way to make different default layouts for each of those summary and detail reports:
Also as the layouts are choosen by the user, i cannot hardcode any particular layout;
So if the user chooses a layout for detail; it has to stay the same layout for the detail report if he goes to summary and then back to detail; unless the user changes the layout again.
I'm using two different Layout types for each report. but i still cannot get the desired effect.
Data:
 gt_layout_s type slis_layout_alv,
 gt_layout_d type slis_layout_alv,
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_s
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_summary.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 is_layout = gt_layout_d
 i_callback_top_of_page = g_top_of_page
 i_callback_user_command = g_user_command
 i_callback_pf_status_set = g_status
 i_save = g_save
 is_variant = gs_variant
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[]
 importing
 es_exit_caused_by_user = gs_exit_caused_by_user
 tables
 t_outtab = it_detail_disp.

Here is how you differentiate between the layout of two different grids. There is the parameter, IS_VARIANT in the function. You usually leave it empty or pass only the report name and username. What you need to do is to pass unique string for each grids to the HANDLE field of the parameter IS_VARIANT. You can probably hard code it as HEADER and DETAILS in your case. Once that is done, system identified that these two different layout for different grids.
Regards,
Ravi
Note : Please mark all the helpful answers

Drill Down report in new window

Hi All,
i have report prompt ( Dashboard) and report . if i click on date column then it will display drill down report.
My issue is drill down report iis displaying in current window. if i click on return to previous screen button then prompt are refreshing. user was confusing which parameters he was selected.
I need solution like.
1) After coming back also prompts are should not refresh . it should display prompts which were user selected.
or
2) drill down report should display in other window. ( then user will close that window he can see his selected prompts)
how can achieve this one in OBIEE. please help me.
Thanks in advance for your time.

Couple things,
you can create primary interaction as Action Link and then in the action link menu you can select option for the new window (that I what I did)
Edit Action Links > More... > Edit Action > Options
For the values, you can use presentation variables and they will carry the values (your fields also have to be prompted, but I think you already have that).
Again this works for me just fine.
Hope this helps.

How to group by a number of visible rows in drill down report

hi,
i have a drill down report with no detail row.
I need to control the number of rows shown on the page based on a variable that a user supplies, however it needs to be only visible rows.
if I add an outmost group based on an expression like this one:
=Ceiling(RowNumber(
"table1")/Parameters!recordsPerPage.Value)
it will count all rows - visible or not.
any help would be appreciated.
thanks
Inna

Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

How to add the required characterists and key figures to drill down report?

hi,
i am creating a drill down report using t.code FKI4. however i noticed that some of the characteristics and key figures required by me is not listed in the report catalog. how can i add the required characteristis and key figures to the report catalog?

Hi Inna,
Based on my research, a drilldown report is a layout design that at first hides complexity and enables the user to toggle conditionally hidden report items to control how much detail data they want to see. Drilldown reports are used to change the report
layout interactively. So it wouldn’t affect the rows displayed in the outmost group. Though some rows are hidden when the report is initially run, it will still count them. This is by design.
Furthermore, if I understand correctly, you also expect the outmost group is a dynamic group depends on the drilldown action, right? As per my understanding, this function still cannot be achieved at this moment.
Thanks for your understanding.
Regards,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Drill-down Report Customizations

Hello!
First, I'm thrilled having found this resource. I really hope someone can help guide me on the 'opportunity' I have here.
I have created a Shared Analyses report. This report displays a count of Service Requests grouped by Primary and Secondary categories (type and sub-category, respectively)
The report works great. However, the individual viewing the report has the ability to click on one of the rows and drill-down. The drill-down report lists the following fields:
Type (primary category); sub-category; service request no.; service request ID; # of service requests (which, at this level, is always 1)
The question - how can I modify that secondary report to make better sense? I'd like to essentially replace the '# of service requests' column with 'subject'. When I go in to manage analyses I can get to this report by clicking the preview and then clicking on one of the drill-down links (just as the end-user would). However, making changes and saving then results in have this secondary report as the one that shows rather than the top-level report.
I do hope this makes sense. I appreciate any guidance in modifying the drill-down reports.
Eddie

Hi Weesie,
I highly recommend that you order the CRMOD reporting book my Michael Lairson. That book is a great resource for these types of questions. You can find it on Amazon. This book answers this and many, many other questions you might have about designing custom reports. http://www.amazon.com/Oracle-Demand-Reporting-Osborne-ORACLE/dp/0071593047/ref=sr_1_1?ie=UTF8&s=books&qid=1273756620&sr=8-1
Drilldown are managed in step 1 of the Build and Analysis window, via column properties. You can remove drilldowns (if you don't want them to show) by choosing "No Interaction" in the Value Interaction type field on the Column Format tab. You can also have them navigate to a custom designed report (which I think is your question) by choosing "Navigate" in the Value Interaction field and choosing the target under the "Add Navigation Target" capability (which shows up when you select Navigate).
Good Luck and I strongly urge you to order Michael's book,
Thom

Drill down report update

Hi,
How to add several currency value (USD, LKR) in drill down report - in Due Date Analysis for open Item report (S_ALR_87012168)
Thanx.

Hi,
How to add several currency value (USD, LKR) in drill down report - in Due Date Analysis for open Item report (S_ALR_87012168)
Thanx.

ALV interactive drill down report

Similar Messages

Maybe you are looking for