ALV Output to Spreadsheet.. all integer,date fields are moved to last .

My requirement is that, Downloading the ALV displayed data into Excel.
So, I gone Menu>List>Export-->Spreadsheet
But, I observed that, the Currency, Date, Unit columns r coming in the last of spread sheet and with out any color(where as other columns does hv some color!)
I am expalining with the example .
when we take the table SFLIGHT.
Go To SE16 and give table SFLIGHT
and then go for it contents..
then the sequence of cloumns in ALV o/p is as follows..
Carrid,Connid,Fldate,Price,Currency ,PlaneType,seats Max,Setats Occ and others..
But when I goto TableEntry>List>Export-->Spreadsheet
->Table->Micro soft Excel..
we will ge the excel Carrid,Connid,Currency ,PlaneType,
Fldate,Price,seats Max,Setats Occ and others..
The Order is Changed.
1 - So, its the SAP default property? OR Do I need do/code some thing, to resemble the ALV displayed data(to meet my requiremenet)?
2- Generally, Wht is the procedure to get thru my requirement? I mean, am I doing correct?
Your help is appreciated.
With Regards,
Satish.
Edited by: satish akkina on Jan 17, 2008 7:23 PM

Hi Satish,
Ideally, the layout should strictly follow the field catalogue structure you have defined. Just because you are getting the correct layout in ALV implies that everuthing is OK with your code.
A humble suggestion is that you cross-check this malfunction by downloading the same report on some other system (PC). May be some setting in the Excel sheet is modifying the layout.
Do let me know if it works, else i will dig more to find out the reason and the remedy.
Regards,
Rumi

Similar Messages

ALV Output to Spread sheet.. all integer,date fields are moved to last .

My requirement is that, Downloading the ALV displayed data into Excel.
So, I gone Menu>List>Export-->Spreadsheet
But, I observed that, the Currency, Date, Unit columns r coming in the last of spread sheet and with out any color(where as other columns does hv some color!)
I am expalining with the example .
when we take the table SFLIGHT.
Go To SE16 and give table SFLIGHT
and then go for it contents..
then the sequence of cloumns in ALV o/p is as follows..
Carrid,Connid,Fldate,Price,Currency ,PlaneType,seats Max,Setats Occ and others..
But when I goto TableEntry>List>Export-->Spreadsheet
->Table->Micro soft Excel..
we will ge the excel Carrid,Connid,Currency ,PlaneType,
Fldate,Price,seats Max,Setats Occ and others..
The Order is Changed.
1 - So, its the SAP default property? OR Do I need do/code some thing, to resemble the ALV displayed data(to meet my requiremenet)?
2- Generally, Wht is the procedure to get thru my requirement? I mean, am I doing correct?
Your help is appreciated.
With Regards,
Satish.
Edited by: satish akkina on Jan 17, 2008 7:34 PM

Hi Satish,
I am also facing this problem in one of my programs. Though I solved this problem temporarily by adding a new button to the Screen and have downloaded the file using GUI_DOWNLOAD function module, I would really like to know the reason for this and also the solution for this if you have known it by now.
Regards,
Amit.

Data arrived in ODS new data - all data fields are cleared

Hello Experts
We are loading every day since 3 years data into a DSO There is a simple start routine.
Issue:
Suddenly 1x record out of 12'000 records loses the data fields or in other words the data fields are cleared. The key part of the record still extists. The table of new data shows the record with all cleared data fields. Thus before activation the data are lost already somwhere in updating.
We dont use expert routines, no end routines ect. It is a simple 1:1 transformation with a simple start routine.
We debugged the start routine and the record still exists correctly at the end of the start routine with all entries in the data fields.
So quite tricky and we hope of some good ideas , you may help us.
Thanks a lot for your input and help
Christian
Our system is SAP BW 7.01 on DB6

Hello Raf
The data request has been split in 2 x data packages.
And the erroneous record was exactly the last data record in data package 1.
I have than increased the data request size from 10’000 Records to 50’000
records (default) and it worked than perfectly without clearing any data
columns
For me absolutely not understandable, why this can happen.
Do you have an idea.
Best regards
Christian

No data fields are available in the OLAP cube

i was able to access data in Excel yesterday, but now all the cubes that i have created cannot be accessed by Excel any more and after authenticating and selecting the cell for the pivot table i get this error:
No data fields are available in the OLAP cube
i just hope this is some process in HANA that needs restarting and not some endemic MDX problem. if so, where do i look?
has anyone seen this?
BTW, shouldn't there be a single log on for the connection? i have to enter credentials twice: 1 when creating the connection and 2 when opening the pivot table.

something/someone has locked my userid when i was recreating the steps in Excel (i don't think i have tried 'wrong' passwords, but i did try a ['wrong' user|http://misiorek.com/h/GMSnap206%202011-11-27.jpg]
Here are the steps:
1. Open [Excel|http://misiorek.com/h/GMSnap202%202011-11-27.jpg].
2. Enter [connections|http://misiorek.com/h/GMSnap203%202011-11-27.jpg].
3. Select [HANA cube|http://misiorek.com/h/GMSnap204%202011-11-27.jpg].
4. Select [Pivot cell|http://misiorek.com/h/GMSnap205%202011-11-27.jpg].
5. Enter credentials (see above).
I'm also not sure why I see these security messages:
[locked|http://misiorek.com/h/GMSnap207%202011-11-27.jpg], Microsoft [warning|http://misiorek.com/h/GMSnap208%202011-11-27.jpg], HANA [warning|http://misiorek.com/h/GMSnap209%202011-11-27.jpg], HANA db [warning|http://misiorek.com/h/GMSnap210%202011-11-27.jpg]

Office 2010 Don't print blank lines when data fields are empty

How do you do this in office 2010? Where do we go now?
This used to be under the Tools menu in previous versions:
On the Tools menu, click Mail Merge.
In the Mail Merge Helper dialog box, click Merge.
NOTE: You must select the main document and data source for the merge before doing step 2.
In the Merge dialog box, under When Merging Records, click either:
Don't print blank lines when data fields are empty.
-or-
Print blank lines when data fields are empty.
Click Close in the Merge dialog box, and then click
Close in the Mail Merge Helper.
NOTE: If you made no changes in the Merge dialog box, the
Close button is not available. Click Cancel instead.
Back to the top

Hi,
In Word 2007 or Word 2010, you can add
Mail Merge Helper to the Quick Access bar, and perform the steps then.
To add the
Mail Merge Helper command in the Quick Access Toolbar in Word 2007, follow these steps:
a.
In Word 2007, click the
Microsoft Office Button, and then click Word Options >
Customize.
In Word 2010, click File > Options > Customize Ribbon.
b.
Click
All Commands in the Choose commands from, and then click
Mail Merger Helper in the Choose commands from list.
c.
Click
Add, and then OK.
Best Regards,
Sally Tang

Date fields are showing as / / in DSO for blank dates or no dates

We are loading flat file data to DSO and the date fields are showing as / / in DSO for blank dates or no dates in the flat file source system. We don't want to see this / / and instead of this, we would want to this field in DSO to be in blank. Please help how to achieve this. Is there any way to do this transformation. If yes, then can you please provide the sample coding.
Advance Thanks,
Christy

I have added the code and data loading is successful. while DSO activation, it is failing. The error message is,
Value '#' of characteristic 0DATE is not a number with 000008 spaces.
It seems that we need to change the code. Can you provide me the corrected code please. Thanks.
Christy

Converting ALV output into Spreadsheet.

Hi friends,
I have generated one alv report.. there are 65 outfields which are dynamically created according to input.
when i am converting output to spreadsheet after 27 columns its going to next line. i want all 65 columns in single line.
Pls anybody help me..
Thanks & Regards
Phani

Hii friends,
Thanks for your reply...
I have solved my issue..through following steps..
. Once you get the output.
. goto list-->export--->spreadsheet

Problem in downloading alv output to spreadsheet using sap standard downlo.

Hi all,
I have an ALV report Output of approx 120 columns , But when I am downloading the output to spreadsheet using standard download button , thefile is downloaded but the columns in multiple lines, is there any method/setting by which i can download the column output in same line. using the same sap standard button
thanks
bobby

answered

ALV - Excel download Date field sits in the last Column

Hi,
I have custom ALV grid report using OOp . From the report i am exporting the results to an EXCEL, but the date columns in the report sits as last column the exported excel.
Any idea ?
Thanks
aRs

That is the default functionality of the ALV grid, it collects all the similar data types together and then donwloads the data.
If you don't want that, you will have write code yourself and download the data
Regards,
Ravi
Note - Please mark all the helpful answers

Spreadsheet Logger - Naming Data Fields

I need to name the data fieds specifically in my spreadsheets. Unfortunatly the neames default to the full path of the object whose data I am storing the spreadsheet.
How can I change the data field name to custom text that I specify?
Thanks,
NoElephant

There is no direct way to change the spreadsheet column labels in the Lookout Spreadsheet object. However, one work around is to create a named expression which points to the data member to be logged (in relative mode). Then log the expression (named in the desired manner) using the spreadsheet object.
Chad Pelletier
Applications Engineer
National Instruments

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Visio 2010 - Shape Data Fields Are Not Saving

I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
sheet".
All data fields appear to save normally while file is open, it remains as entered. However, when file is closed and later reopened select data fields do not retaining data correctly. Some retain nothing (null), or revert back to a "default"
value, see below for a couple examples:
Rack Units: Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
Room: Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
Comments: Fails to retain any data
I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created. Looked into whether it might have to do with a particular vendor's stencils/drawings
but I have a number of Cisco drawings where some save those fields as entered while others do not. I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered.
Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
Is there a GLOBAL setting that can be set once within a file?
Thank you in advance for your time to assist me in fixing these problems. Have a great day!
MJ_NWE
MJ

>Can I build logic so that they can't fill in a field unless the previous field has been filled in?
It's theoretically possible to do this (e.g. each field has an action
of removing read-only on the next). It's considered extremely bad form
design, because people don't always fill in fields in the order
specified. If you watch people with a form they fill in their name,
address, other easy stuff; then they go back for the harder stuff.
They may want to save a form because one piece of information needs
research.
What you might like to consider is a large splash "FORM INCOMPLETE" in
Red or whatever, which vanishes when all the fields are completed.
Aandi Inston

Business Partner Creation/Display - General Data fields are missing

Hi,
We have an issue in our ECC6.0 system. In FPP1/FPP2/FPP3 transactions General data fields such as Driver's license, SSN, Employee class are missing under Identification tab. But the same are displayed in BP transaction code. What configuration would causing this issue.

I found a SAP Note 844949 which is talking about the same kind of issue. As per the note I regenerated subscreen containers for application object BUPA.
Call transaction BUSP and generate the subscreen containers for the application objects BUPA, FICA and BUPR. To do this, set the "All screens" indicator under "Generate All Screens or Just Selected Screens".
If this does not correct the incorrect display, use transaction BUPT for the business partner or transaction CAWM for the contract account to make sure that the fields are not missing due to the field modifications. (If you cannot call these transactions, exit the SAP Easy Access menu by using /n and then call BUPT or CAWM.

Blank or null date fields are displaying 1/1/1901

I have optional date fields that users may leave blank. When they do, the result is that my report is printing 1/1/1901 (which I am guessing is a default setting somewhere in the options???) Can anyone point me in the right direction so that if the field is null, the "text string" & doesn't print?
Here's the formula, maybe it's a fundamental problem with the way I've done the formula:
if totext({Command.SHIPDATE}) = ""
then ""
else "Needed by: " & {Command.SHIPDATE}
Any help is greatly appreciated.

Is SHIPDATE a date type or text field? I an presuming a text field based on your example. If the date is defaulting to 1/1/1901, I am guessing that is a function of your database server rather than Crystal Reports. So I would alter your code to say:
if totext({Command.SHIPDATE}) = "1/1/1901"
then ""
else "Needed by: " & {Command.SHIPDATE}
Fuskie
Who notes you could also put the text and data object directly in the report and use a suppression formula instead of a report object formula...

In alv output i need to have different fields

Hi all,
how to get the different no.of output fields for first few records and
then it should change for another few records.
any suggestion will be rewarded.
regards
cnu

hi,
use blocked alv.
example:
REPORT ZSR_ALV_BLOCKED.
TABLES:     ekko, mara.
TYPE-POOLS: slis.
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
TYPES: BEGIN OF t_mara,
matnr TYPE mara-matnr,
mtart TYPE mara-mtart,
matkl TYPE mara-matkl,
END OF t_mara.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      it_mara TYPE STANDARD TABLE OF t_mara INITIAL SIZE 0.
*ALV data declarations
DATA: fieldcatalog1 TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      fieldcatalog2 TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      gd_layout     TYPE slis_layout_alv,
      gt_events_ekko TYPE slis_t_event,
      xs_event      TYPE slis_alv_event,
      gt_events_mara TYPE slis_t_event,
      gd_repid       TYPE sy-repid,
      gt_print TYPE slis_print_alv.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM data_retrival.
PERFORM build_fieldcat.
PERFORM build_layout.
PERFORM events_ekko.
PERFORM events_mara.
PERFORM display_alv_report.
*SUBROUTINES
*&      Form data_retrival
FORM data_retrival .
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekko.
SELECT matnr mtart matkl
   UP TO 10 ROWS
    FROM mara
    INTO TABLE it_mara.
ENDFORM.                    " data_retrival
*&      Form build_fieldcat
FORM build_fieldcat .
FOR EKKO
fieldcatalog1-fieldname   = 'EBELN'.
fieldcatalog1-seltext_m   = 'Purchase Order'.
fieldcatalog1-col_pos     = 0.
fieldcatalog1-outputlen   = 20.
fieldcatalog1-emphasize   = 'X'.
fieldcatalog1-key         = 'X'.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
fieldcatalog1-fieldname   = 'EBELP'.
fieldcatalog1-seltext_m   = 'PO Item'.
fieldcatalog1-col_pos     = 1.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
fieldcatalog1-fieldname   = 'STATU'.
fieldcatalog1-seltext_m   = 'Status'.
fieldcatalog1-col_pos     = 2.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
fieldcatalog1-fieldname   = 'AEDAT'.
fieldcatalog1-seltext_m   = 'Item change date'.
fieldcatalog1-col_pos     = 3.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
fieldcatalog1-fieldname   = 'MATNR'.
fieldcatalog1-seltext_m   = 'Material Number'.
fieldcatalog1-col_pos     = 4.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
fieldcatalog1-fieldname   = 'MENGE'.
fieldcatalog1-seltext_m   = 'PO quantity'.
fieldcatalog1-col_pos     = 5.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
fieldcatalog1-fieldname   = 'MEINS'.
fieldcatalog1-seltext_m   = 'Order Unit'.
fieldcatalog1-col_pos     = 6.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
fieldcatalog1-fieldname   = 'NETPR'.
fieldcatalog1-seltext_m   = 'Net Price'.
fieldcatalog1-col_pos     = 7.
fieldcatalog1-outputlen   = 15.
fieldcatalog1-do_sum      = 'X'.        "Display column total
fieldcatalog1-datatype     = 'CURR'.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
fieldcatalog1-fieldname   = 'PEINH'.
fieldcatalog1-seltext_m   = 'Price Unit'.
fieldcatalog1-col_pos     = 8.
APPEND fieldcatalog1 TO fieldcatalog1.
CLEAR fieldcatalog1.
FOR MARA
fieldcatalog2-fieldname   = 'MATNR'.
fieldcatalog2-seltext_m   = 'Material No'.
fieldcatalog2-col_pos     = 0.
fieldcatalog2-outputlen   = 10.
fieldcatalog2-emphasize   = 'X'.
fieldcatalog2-key         = 'X'.
APPEND fieldcatalog2 TO fieldcatalog2.
CLEAR fieldcatalog1.
fieldcatalog2-fieldname   = 'MTART'.
fieldcatalog2-seltext_m   = 'Material type'.
fieldcatalog2-col_pos     = 1.
APPEND fieldcatalog2 TO fieldcatalog2.
CLEAR fieldcatalog2.
fieldcatalog2-fieldname   = 'MATKL'.
fieldcatalog2-seltext_m   = 'Material Group'.
fieldcatalog2-col_pos     = 2.
APPEND fieldcatalog2 TO fieldcatalog2.
CLEAR fieldcatalog2.
ENDFORM.                    " build_fieldcat
*&      Form build_layout
FORM build_layout .
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
ENDFORM.                    " build_layout
*&      Form events_ekko
FORM events_ekko .
CLEAR xs_event.
xs_event-name = slis_ev_top_of_page.
xs_event-form = 'TOP_OF_PAGE-EKKO'.
APPEND xs_event TO gt_events_ekko.
CLEAR xs_event.
xs_event-name = slis_ev_end_of_list.
xs_event-form = 'END_OF_LIST_EKKO'.
APPEND xs_event TO gt_events_ekko.
ENDFORM.                    " events_ekko
*&      Form TOP_OF_PAGE-EKKO
FORM top_of_page-ekko.
WRITE: / 'TOP OF PAGE : Purchase Order'.
ENDFORM.                    "XTOP_OF_PAGE
*&      Form END_OF_LIST_EKKO
FORM end_of_list_ekko.
WRITE: / 'end OF list : Purchase Order'.
ENDFORM.                    "END_OF_LIST_EKKO
*&      Form events_mara
FORM events_mara .
CLEAR xs_event.
xs_event-name = slis_ev_top_of_list.
xs_event-form = 'TOP_OF_LIST-MARA'.
APPEND xs_event TO gt_events_mara.
CLEAR xs_event.
xs_event-name = slis_ev_end_of_page.
xs_event-form = 'END_OF_PAGE_MARA'.
APPEND xs_event TO gt_events_mara.
ENDFORM.                    "events_mara
*&      Form TOP_OF_LIST-MARA
FORM top_of_list-mara.
WRITE: / 'TOP OF LIST : Material Master'.
ENDFORM.                    "TOP_OF_LIST-MARA
*&      Form END_OF_PAGE_MARA
FORM end_of_page_mara.
WRITE: / 'End OF Page : Material Master'.
ENDFORM.                    "END_OF_PAGE_MARA
*&      Form display_alv_report
FORM display_alv_report .
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = gd_layout
     it_fieldcat                      = fieldcatalog1[]
      i_tabname                        = 'it_ekko'
      it_events                        = gt_events_ekko
    TABLES
      t_outtab                         = it_ekko
   EXCEPTIONS
     program_error                    = 1
     maximum_of_appends_reached       = 2
     OTHERS                           = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = gd_layout
      it_fieldcat                      = fieldcatalog2[]
      i_tabname                        = 'it_mara'
      it_events                        = gt_events_mara
    TABLES
      t_outtab                         = it_mara
   EXCEPTIONS
     program_error                    = 1
     maximum_of_appends_reached       = 2
     OTHERS                           = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gt_print-reserve_lines = 2.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
   EXPORTING
     is_print = gt_print.
ENDFORM.                    " display_alv_report

ALV Output to Spreadsheet.. all integer,date fields are moved to last .

Similar Messages

Maybe you are looking for