Always get MaxMessageSizeExceededException on large number of MBeans

I have 60 apps deployed on my Cluster (with 2 ManagedServers), and each App has a large number of MBeans. If I go to the custom tree using wlst, I always get this error, even though the MaxMessageSize has been set way way higher.
weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '10000080' bytes exceeds the configured maximum of: '10000000' bytes for protocol: 't3'
The ManagedServers are started with the ClusterManager, and each ManagedServer has the Arguments set for ServerStart:
-Xms4g -Xmx8g -XX:MaxPermSize=7g -d64 -XX:+UseCodeCacheFlushing -XX:NewSizeThreadIncrease=100 -Dweblogic.ThreadPoolPercentSocketReaders=50 -Dweblogic.ThreadPoolSize=100 -Dweblogic.SelfTuningThreadPoolSizeMin=1000 -Dweblogic.MaxMessageSize=20971520 -Djava.library.path=/install/Middleware/wlserver_10.3/server/native/linux/x86_64
The AdminServer has been set with a similar MaxMessageSize, and the wlst from where I issue the custom() command, has been started with "-Dweblogic.MaxMessageSize=20971520" too.
To top it off, I checked the JVM's with jinfo to double check the weblogic.MaxMessageSize, and all do comply to the specified bytes, none being 10M of the error message.
I am able to reproduce the issue on Linux x64 as well as Solaris 11 Sparc.
Could it be related to the MBeans (as I assume)? When I only deploy 55 apps, the issue does not occur. Any other tips are welcome.

Here WLST would be acting as the client. It seems that you have placed the setting of the message max size on the server side (which is one part of the tuning), but you need to place the same to the WLST too or for that matter any other client like applet, stand-alone java code.
In short you can try the following, if you wish:
set the environment using setDomainEnv.sh/cmd and the run:
java -Dweblogic.MaxMessageSize=20971520 weblogic.WLST
Note: I read through your note about providing "-Dweblogic.MaxMessageSize=20971520" parameter to WLST, but not sure whether you have checked WLST process with jinfo or the WLS server nodes.
Also I am not sure what type of application you are using by you can consider passing the above property via System.property() call to the application.
Additionally, I would request you to share some more information, like the config (snippet), jinfo output, and WLST output if you try to locate the current MaxMessageSize value of the server by connecting to it, complete stack (if any).. in case the above does not help.
Note: I have tried this multiple times and it works like a charm. But from your notes it seems to a case of overridding of parameters value.
HTH,
AJ

Similar Messages

Jtable on JScrollPane get corrupted for large number of rows

Hi I have problem with vertical scroll bars of JScrollPane.
When move the scroll bar(faster) for a Jtable (with 2000 rows) the rows get
corupted.
Please let me know how can I fix this problem?

Hi,
I have just recompiled my (previously 1.3.1) application with 1.4.2 and notice the same problem. The problem starts somewhere between 1700 and 2500 rows.
Its not just the scroll bar for me - the display corrupts whereever i click the mouse on the table area.
Did you manage to diagnose??
Thanks, Dave

Sender File Adapter does not get files when there is a large number ( 300)

We are on XI 7.0 (SAPKB70015)
We have an issue picking up a large number of files from a particular server. We are trying to pickup the files based on a wildcard e.g. test
- we can retreive up to 200 files from the same server (using the same config) no problem
- we can pull lots of files (>3000) files from other servers (using the same config) no problem
- we can write an mget command (mget test) to reteive the files no problem
So the only issue is retrieving a large number of files from a parfticular server. We see no errors in the RWB.
To get this sorted out we need to find the exact commmands that XI executes to attempt to retrieve the files. Can anyone point me in the right direction on how to find this.
Thanks
Richard

It turned out that this was caused by a limitation on the ftp server.
The file adapter uses the dir command to get a listing of the files matching a specific mask. The dir command does not return any files if there are a large number (the ls command works fine but the file adapter uses dir instead of ls).
sap told me that 'According to this FTP server is no compliant with RFC 959 and that is
why DIR command returns an error.'
We were able to get this resolved by applying a patch on the ftp server.
Thanks
Richard

I had Adobe Acrobat Serial loaded before The hard drive crashed on my old PC. I have tried to download Acrobat 9 on my new PC, but always get the message "This is not a valid serial number". I had Adobe 9 Standard on the old. But what downloads from th

I had Adobe Acrobat Serial loaded before the hard drive crashed on my old PC. I have tried to download Acrobat 9 on my new PC, but always get the message “This is not a valid serial number”.
I had Adobe 9 Standard on the old. But what downloads from the page http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html is Adobe 9 Pro. Perhaps this Pro version is the problem.
Anyway, can you point me to a way to install Adobe on my new PC?

You can try Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools.

I've just changed from a PC to a mac and have a large number of downloaded WMA music files (not i-tunes purchases) which I just can't get into my i-tunes library. File converters don't seem to work either. Any ideas?

I've just changed from a PC to a mac and have a large number of downloaded WMA music files which I can't get into i-tunes. When the library was in Windows, i-tunes would convert the files automatically, but this doesn't happen now. I've downloaded a couple of file converters, but these don't seem to work either. Any ideas?

iTunes for Windows (but not iTunes for Mac) can import and convert unprotected WMA tracks. If the tracks are protected by DRM (Digital Rights Management) then it will not accept them.
One option would be to install iTunes on your PC, do the conversion, and then transfer the converted tracks from iTunes on your PC to iTunes on your Mac.

Business connector scheduler gets hanged and Next run value is large number

Hi All,
I see the scheduler in business connector gets hanged and the Next run value shows huge/large number like 9223370831700598.0 sec. Please can anyone suggest what can be done.
Currently BC ver is 4.7. The problem gets resolved every time when i restart the server.

Hi,
Not aware of the reason though, I guess you must be using the simple scheduled tasks.
Try using complex reapting tasks where you specify days , minutes etc.
It should work fine.
Hope it helps. Reward if useful.
Regards,
Siddhesh S.Tawate

Cannot change the print margins when printing out my spreadsheet. Tried clicking on format and then Document but when I enter a number I always get " invalid number".

I cannot change the margins when printing out my spreadsheet. I clicked on the format then on document and got a entry box. But everytime I try entering a number to change the left margin ( tried .5 ) I get an " invalid number " response. I can print out the spreadsheet but always get a message telling me the margins may be too small and data may be clipped. Data doesn't get clipped but left part of the spreadsheet is right at the left side of the paper. Want to change the margin so I don't get that message.

Naming the spreadsheet app would do wonders for getting an answer.

BUG: Last Image of Large Number Being Moved fails

This has happened several times in organizing some folders. Moving over 100 images at a time, it seems that one image near the end fails - I get the screen that Lightroom can't move the image right now. It's always just one image. I can move it on it's own just a second later and it works just fine.
While the Move operation is being fixed, consider that it could go way faster than it does now if the screen didn't have to be refreshed after each file has been moved. I can see the value of the refresh if it's just a few images being moved, but for a large number, the refresh isn't helpful anyhow.
Paul Wasserman

I posted on this last week, and apparently a number of people have experienced this.
http://forums.adobe.com/thread/690900
Please report it on this bug report site so that it gets to the developers' attention sooner:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Bob

Large number of concurrent sessions

What optimizations are used to provide a large number of concurrent sessions?

Generally:
1) Design so that clustering is easy - e.g. cache only read-only data, and
cache it agressively
2) Keep replication requirements down - e.g. keep HTTP sessions small and
turn off replication on stateful session beans
3) Always load test with db shared = true so that you don't get nasty
surprise when clustering
4) Don't hit the database more than necessary - generally the db scales the
poorest
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Priya Shinde" <[email protected]> wrote in message
news:3c6fb3bd$[email protected]..
>
What optimizations are used to provide a large number of concurrentsessions?

Download always get a stub, I want the actual exe to save for other computers

I want the full copy of firefox not the stub. The stub seems to be for downlad and install. I want to save the full exe and then install on a number of computers. I have tried many ways to find the full exe but I always get transferred to the stub. Up to now I was able to get the full exe. Where have you hidden it? I have to be careful with download quotas and speeds.
I am using 25.0.1 Windows XP and have used firefox forever!

By the way, if you are on visiting the Firefox page and have the current version, the secret to finding that link is on the right side where it says "Download a fresh copy".
If you are visiting from another browser, below the large green button, there is a link labeled "Systems & Languages" that leads to the page with the full installers for all of the languages.
Not obvious, I agree.

TS4268 I have apple ID and when trying to sign in to use FaceTime,i always get registration error.how may you help me for that guys,thanks.

I have apple ID and when trying to sign in to use FaceTime,I always get error in registration,(This words always apper; The server encountered an error processing registration.Please try again later.)
Can I get your Advise on what to do? Thanks

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Mail - how to send to large number of recipients?

How can I send an email to a large number of recipients that I hold addresses for in a document without a) adding them to my contacts, and b) so that they can't all see each others addresses?

I thought about using BCC, but it seems a little messy although it would do the job.
Messy how? That's exactly what it's for. In fact, there's no other way to hide addresses from other recipients of the message. The only other way to do it would be to script automated sending of one message per address, and that would get quite messy!
What is the maximum number of recipients that Mail can handle?
There's no limit enforced by Mail, AFAIK. The limits come from the SMTP server you're using.
One of the issues I had when using Outlook on Windows for this by copying and pasting from a text document, was that if there was an invalid/non-existent address in the list, it would just return an error and I was never quite sure if the whole thing didn't send, or if it was just to the dodgy address(es).
In Mail, you'll just get a bounce message for any addresses that don't exist. The one exception to that is addresses on the same server that you're sending from... often, the server will simply reject the attempt to send to an address that it knows doesn't exist. I'm not sure what kind of message the server returns in that case, though, and suspect it depends on the server. It's been a while since I've seen such a problem.

How to handle a large number of query parameters for a Browse screen

I need to implement an advanced search functionality in a browse screen for a large table. The table has 80+ columns and therefore will have a large number of possible query parameters. The screen will be built on a modeled query with all
of the parameters marked as optional. Given the large number of parameters, I am thinking that it would be better to use a separate screen to receive the parameter input from the user, rather than a Popup. Is it possible for example to have a search
button on the browse screen (screen a) open a new screen (screen b) that contains all of the search parameters, have the user enter the parameters they want, then click a button to send all of the parameters back to screen a where the query is executed and
the search results are returned to the table control? This would effectively make screen b an advanced modal window for screen a. In addition, if the user were to execute the query, then want to change a parameter, they would need to be able to
re-open screen b and have all of their original parameters still set. How would you implement this, or otherwise deal with a large number of optional query parameters in the html client? My initial thinking is to store all of the parameters in
an object and use beforeShown/afterClosed to pass them between the screens, but I'm not quite sure how to make that work. TIA

Wow Josh, thanks. I have a lot of reading to do. What I ultimately plan to do with this (my other posts relate to this too), is have a separate screen for advanced filtering that also allows the user to save their queries if desired.
There is an excellent way to get at all of the query information in the Query_Executed() method. I just put an extra Boolean parameter in the query called "SaveQuery" and when true, the Query_Executed event triggers an entry into a table with
the query name, user name, and parameter value pairs that the user entered. Upon revisiting the screen, I want the user to be able to select from their saved queries and load all the screen parameters (screen properties) from their selected query.
I almost have it working. It may be as easy as marking all of the screen properties that are query parameters as screen parameters (not required), then passing them in from the saved query data (filtered by username, queryname, and selected
item). I'll post an update once I get it. Probably will have some more questions as I go through it. Thanks again!

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

A simple way in sending message on a large number of contacts?

Is there a simple way in sending a large number of contacts? I mean, i'll send my message on a group, i.e. "hello" to "classmates" group. I know it is present during ios4 & 5 version? Why now on ios7? How's that? Some of my contacts are changing new numbers so i can't add them to my inbox.

When a device that is connected to an icloud account has it's contacts deleted, the same contacts at icloud.com are also deleted and then the changes propagate to other computers and devices also connected to the same icloud account. In other words, the contacts are deleted everywhere. Also, any iOS backup to icloud does not include contacts or any of the other Apple data, like calendars, reminders, etc. The only way you can get that data back is if it was on a computer which has been frequently backed up. You restore the data from the backup. (This reference to "backup" is a local backup, it has nothing to do with icloud.)

Always get MaxMessageSizeExceededException on large number of MBeans

Similar Messages

Maybe you are looking for