Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow which point to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing

Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?

This is the solution to your issue.
I wish you the best of luck. 
http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU

Similar Messages

  • I'm in the process of installing ios 7.1 update in my  5s and it took too long. Can i stop its installation?  Great thanks.

    Hello everyone! I'm in the process of installing ios 7.1 update in my  5s and it took too long. Can i stop its installation? Can't open my phone.. what shoudl I do?  to Great thanks.

    Help pls... thank you.

  • Can I drag and drop a copy of my iTunes library from a portable hard drive more than once?

    Can I drag and drop a copy of my iTunes library from a portable hard drive more than once?  Not copy it, but actually drag and drop it into my music folder on my computer more than once if needed?

    rnavarrette wrote:
    Can I drag and drop a copy of my iTunes library from a portable hard drive more than once?  Not copy it, but actually drag and drop it into my music folder on my computer more than once if needed?
    Nothing is going to stop you from dragging it in multiple times, but what exactly are you trying to do?  Are you trying to get iTunes to look through the folder and pick up newly added song files?

  • Please could you help my iphone 5 is stuck while in recovery mode, there is a USB sign and an arrow is pointing to itunes symbol, with the Itune red logo symbol

    Please could you help my iphone 5 is stuck while in recovery mode, there is a USB sign and an arrow is pointing to itunes symbol, with the Itune red logo symbol

    Hi Turn iPhone off Connect lead to USB on your PC Press & hold power button down on iPhone  don't let go Connect lead to iPhone keep button pressed until PC sees iPhone then wait for restore . Cheers Brian

  • ICloud has added some albums more than once when viewed on my iPad.Is it possible to delete the unwanted extra copies.

    How do I erase unwanted albums from iCloud.On my iPad the same album has been added more than once yet on my mac with iCloud there are no issues.

    I assume you mean photo albums.  How were these albums added in the first place?  Where they created on your iPad?  Do they have the same name?

  • The screen is frozen while installing software updates. Say about 2 minutes and it has been more than hour. How can I cancel or do something about it? Is it ok to unplugg it? Please advise.

    The screen is frozen while installing software updates. Say about 2 minutes and it has been more than hour. How can I cancel or do something about it? Is it ok to unplugg it? Please advise.

    Really?
    Is there no other option? No magic key combo that brings up a secret menu?
    My imac just froze during a software update install and I too do not know what to do.

  • My itunes library has organically grown from more than one itunes account but all now on a separate computer.  If I upgrade to iTunes match will I have to pay for each account?

    My itunes library has organically grown from more than one itunes account (all paid for by me) but all now on a separate computer.  If I upgrade to iTunes match will I have to pay for each account or just once, for the computer?

    No.  Provided the computer that you use to upload / match your Songs is authorised to play all of the Songs all works well - once complete you can download Song files that will play on your libraries / other computers without each computer having to be authorised.

  • HT201210 I attempted to install iOS 7.0.2 on my iPad (3rd gen).  The screen has frozen.  Have tried resetting and restoring (via iTunes).  Error mssg says that my iPad cannot be restored.  Now what do I do?

    I attempted to install iOS 7.0.2 on my iPad (3rd gen).  The screen has frozen.  Have tried resetting and restoring (via iTunes).  Error mssg says that my iPad cannot be restored.  Now what do I do?

    Hi there hhcd92!
    I have an article here for you that can help guide you through troubleshooting this situation:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • If I purchase PS for the $9.99 per month plan, will I be able to install / use on more than 1 computer?  (i.e. office and home)

    If I purchase PS for the $9.99 per month plan, will I be able to install / use on more than 1 computer?  (i.e. office and home)

    Yes, the subscription license allows for working installations on two machines.

  • I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions?

    I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions? Thanks.

    Google

  • I have a problem in the process of installing iTunes

    Hello
      I have a problem in the process of installing iTunes and stops in the middle and show me this message
    http://dl.dropbox.com/u/22061660/sads.jpg
    Do any of you has a solution

    From last picture looks like your user is administrator and it should have administation privileges.
    But picture with error message says you doesn't.
    The things I would do:
    1. Reboot or Log out and log in
    2. Try to change location where iTunes will be installed (ex. C:/iTunes)
    3. Try to create test user also with admin priviledges and then try to install on another accaunt.
    That's my thoughts for now...
    Regards,
    Mirek

  • In the process of installing OS X Maverick on mac mini; got error "Filesystem verify or Repair failed"

    Hi,
    I am in the process of installing Maverick on my Mac Mini.  I got an error: "Filesystem verify or Repair failed".
    Most threads suggest that I either:
    1. restart process,
    2. install disk and try again,
    3. recover disk
    Since I am in the middle of installing, I cannot seem to go back to my working OS to restart the process.  Since Maverick is available in the App Store, i cannot use a disk for it.  That leaves me with recovering the disk.  Can anyone suggest how I can do this without destroying all my files on the computer?
    Thanks,

    Thanks for your advice.
    I do have a backup, but I can't access it right now.  I tried the OS X Recovery, but when I try the "Command-R" option, it just goes right back into the install.  I have used the "Command-R" option before, so I know when and how long to hold it for.  I just couldn't get it to not enter the install.  I did manage to at one point get a prompt where it asked me if I wanted to install from Macintosh HD (main partition) or Backup (secondary partition), but I chose Macintosh HD, and it went back into the install.  I couldn't get that option again for whatever reason.
    Is there a way I can just start from scratch?  Both Snow Leopard and Mavericks are online only.  Is there a way to pause the install, connect to the internet and install a brand new (wipe out all files - I can always use by backup to restore my important files later) copy of the OS?
    Thanks,

  • Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can  use and it refuses to respond for a period of time

    Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can  use and it refuses to respond for a period of time

    Hi 
    Yes you can delete the expired certificate which are showing  as it is not functional anymore and they remain as stale entries 
    You can use  below command
    Remove-ExchangeCertificate -Thumbprint "specify the value "
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

  • Error:Ref cound more than 1 when add the field

    hai,
    I got the error like "Ref cound more than 1" when i add the field in the table.I use this fuction
    Public Function createUserFields(ByVal tablename As String, ByVal fieldName As String, ByVal fieldDescription As String, ByVal dataType As SAPbobsCOM.BoFieldTypes, Optional ByVal dataSize As Long = 0, Optional ByVal subType As SAPbobsCOM.BoFldSubTypes = SAPbobsCOM.BoFldSubTypes.st_None, Optional ByVal linkedTable As String = "") As Boolean
    Dim v_UserField As SAPbobsCOM.UserFieldsMD
    Dim v_RetVal As Long
    Dim v_ErrCode As Long
    Dim v_ErrMsg As String = ""
    Try
    createUserFields = False
    If Not UserFieldExists(tablename, fieldName) Then
    app.StatusBar.SetText("Creating Table " + tablename + " ...... :> Adding Field: " & fieldName & " - " & fieldDescription, SAPbouiCOM.BoMessageTime.bmt_Long, SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
    v_UserField = com.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
    v_UserField.TableName = "@" + tablename
    v_UserField.Name = fieldName
    v_UserField.Description = fieldDescription
    v_UserField.Type = dataType
    If dataType = SAPbobsCOM.BoFieldTypes.db_Alpha Then
    v_UserField.Size = dataSize
    End If
    If Not (subType = SAPbobsCOM.BoFldSubTypes.st_None) Then
    v_UserField.SubType = subType
    End If
    If linkedTable "" Then v_UserField.LinkedTable = linkedTable
    ' If Not (v_progressBar Is Nothing) Then v_progressBar.Text = tablename + ":> " + "Adding Field:> " & fieldName & " :> " & fieldDescription
    v_RetVal = v_UserField.Add()
    If v_RetVal = 0 Then
    createUserFields = True
    Else
    com.GetLastError(v_ErrCode, v_ErrMsg)
    app.StatusBar.SetText("Failed to add UserField " & fieldName & v_ErrCode & " " & v_ErrMsg, SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
    End If
    System.Runtime.InteropServices.Marshal.ReleaseComObject(v_UserField)
    v_UserField = Nothing
    GC.Collect()
    End If
    can any one help me?
    Regards,
    Ramya.s

    HI
    In 2007 i always got the same problem.
    Solution:
    1st create all tables
    then
    2nd create all fields
    and do not use any querys to exists the table or field
    >If Not UserFieldExists(tablename, fieldName) Then
    use lretcode when you add the field / Table, even it is -2035 it is already exists, do not care.
    '... your original code
                If v_RetVal <> 0 Then
                    Select Case v_RetVal
                        Case -2035 'means already exist
                        Case Else
                            com.GetLastError(v_ErrCode, v_ErrMsg)
    '... your original code
                    End Select
                End If
    Only this way was working for me....
    Regards,
    J.
    Edited by: Janos  Nagy on Jul 30, 2008 2:58 PM

  • My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

    My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

    I have not had any experience in getting any devices repaired so I'm not sure which store to resort to. An official Apple store should more than likely get you what you need, but I'm guessing it's probably more expensive. (if any cost for your situation)
    I hope you get your problem resolved.
    ~Lt. Leviathan

Maybe you are looking for