AME error message

Since day one of me using AME, about 10 months ago, I have had this error message appear. Sometimes, (usually after I have cleared out any previously processed sequences) when I run AME and go File > Add Premiere Pro Sequence I get this error message;
clicking Continue brings up another similar message. After 5 times the errors stop. I have worked out that its down to the card reader which is installed in the computer, as its occupies drives F G I J K (H is not used as its a mapped network drive). With no card(s) in the reader, AME thinks its missing 5 "hard disks". Is there a way to stop AME from seeing these drives? I'm thinking a registry hack or similar?

I suspect that you may have opened a file from the card reader and AME somehow rememebers that in file history and checks on it.  So reseting AME preferences may solve this issue for you. 
If you have AME CS6, hold Ctrl-Shift and then Launch AME.  That should delete all your prefs and make it act like the very first time you launched it.
In AME CC, you only have to hold Shift and then Launch the application.
Let us know if that helps.

Similar Messages

  • Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

    Hello all,
    I can't open a PP project without this error message appearing:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
    What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
    I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
    Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
    Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
    1. How to fix this?
    2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can  afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
    Other older PP projects of mine open and work fine.
    Premiere Pro CC 8.2.0
    Media Encoder CC 8.2.0.54
    OSX 10.10.2
    Any help would be greatly appreciated.
    Duncan.

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • Get an error message on premiere startup

    Cant open premiere without error message coming up. Have tried reinstall of premiere and problem persists.
    This is the error message:
    Process:         Adobe Premiere Pro CC [4020]
    Path:            /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro CC.app/Contents/MacOS/Adobe Premiere Pro CC
    Identifier:      com.adobe.AdobePremierePro
    Version:         7.2.1 (7.2.1)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [202]
    Responsible:     Adobe Premiere Pro CC [4020]
    User ID:         501
    Date/Time:       2014-02-13 11:24:05.660 +0000
    OS Version:      Mac OS X 10.9.1 (13B42)
    Report Version:  11
    Anonymous UUID:  BB7DE34C-CDCB-7E7A-9E84-22B3FB25B1FB
    Sleep/Wake UUID: A7269950-3E71-4B13-96F6-8F4310D0A908
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    abort() called
    *** error for object 0x138dd4458: pointer being freed was not allocated
    [Please don't post crash logs to the user forums.]
    Message was edited by: Jim Simon

    I am Windows, so can't help directly... but some reading that MAY help
    OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html
    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    maverick
    or
    mavericks
    or
    crash on launch
    or
    crash on startup
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
    http://forums.adobe.com/thread/1236603?tstart=0 for a previous "crash on startup" discussion

  • AME error: WinFile.cpp-754

    I updated Adobe Media Encoder to version 4.1.0.107 - it worked fine in the past.
    But I now get this error message when starting to convert a clip: [../../Src/Win/WinFile.cpp-754]
    It doesn't matter which settings I use. It also doesn't matter which codec was used for the source clip.
    Any ideas?

    OK!
    Well I called Adobe support yesterday afternoon... that's a bit of a journey in and unto itself! The first call I ended up transferred to Brazil tech support...
    Second call fared much better. I ended up speaking with a nice woman there that genuinely cared about my problem and took me through a few different possible causes.
    Right off the bat I will say, in my case at the very least, it wasn't Adobe's fault.
    I installed the K-Lite codec pack (http://www.filehippo.com/download_klite_codec_pack/) which is a collection of probably a hundred different audio and video codecs... I was a little sketched out about this initially, since it is really an illegal collection of various companies IP, such as macrovision, DIVX and the like. But, it was Adobe's suggestion, so I thought it was worth a try. And you get a chance to set a Windows restore point before the installation, so I suggest when given the option to do that you check that box during the install.
    Lo and behold, during the installation of K-Lite, it does a registry check for codecs... turns out I had an issue with the Motion JPEG codec in my Windows registry, it offered to fix it for me, and I did... Bang! Off to the races. I haven't tested AME a whole bunch today, just enough to get my work done, but I will do more investigation later. It is currently working like a charm.
    The things I listed in my initial message (Nero, deleting project files, removing prefs) are all good ideas, but the one thing that worked for me was the K-Lite codec pack. Go figure.
    Thank you to the lady at Adobe tech support, whose name I can't remember, but whose tips were invaluable. I hope this helps some of you out there with this problem!
    Now... the only blame I can attach to Adobe... are those F'n error messages! God damn! They need someone to translate that crap into English, or at least engrish... Winfile cpp 754? What the hell is that? Tell me there is an issue with my windows registry, at the very least... point me in the right direction Adobe so you don't have to put your tech support people (and perhaps more importantly, your CUSTOMERS) through such a nightmare!!
    Message was edited by: mpm902

  • Workflow notification delegated to the originator contains an error message in notification content

    Hi All,
    We are using a workflow for managing User Access Request(to get new responsibilities) where approval hierarchy is set via AME rules.
    Facing an issue, when approver has set a vacation rule and to whom the notification delegated happens to be the requester itself.
    Notification contains an error message which says like: "Automatic route to <use name> failed. encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.reassign"
    However notification correctly displays its content and also the validation logic that we have put in post notification function while responding to notification is working correctly .
    Also If the vacation rule is set to some user other than requester, issue does not appear.
    Please guide if faced similar issue or any idea to overcome this.
    Thanks in advance!!
    Indu

    I r-clicked on the error message of the details "Request IDoc : Application document not posted" and selected "Idoc maint in OLTP" and then I saw the error message in the log.
    I see that my systems are off a couple minutes.
    Should I just reboot these sys's?
    DataSource 0TCTIOBJNM_TEXT has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 0TCTIOBJNM_TEXT does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 10/31/2007 11:54:29.
    The time stamp in the BW system is 10/31/2007 11:52:10.
    System Response
    The load process has been terminated.
    Procedure
    Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.

  • R11:RECEIVED ERROR MESSAGES FOR AP INVOICE APPROVAL IN ORACLE WORKFLOW

    Hi All,
    We have this error:
    ### Detailed Problem Statement ###
    Received the following error messages in sysadmin notifications:
    Event Error Name: 100
    Event Error Message: ORA-01403: no data found
    Event Error Stack: HZ_DQM_SYNC>REALTIME_SYNCH(oracle.apps.ar.hz.DQM.realtimesync,
    30665979B704AE043C0A81404B04A)
    Event Error Name: WFE_DISPATCH_RULE_ERR
    Event Error Message: [WFE_DISPATCH_RULE_ERR] ENAME=oracle.apps.ap.payment EKEY=10001
    RULE=ap_payment_event_wf_pfg.rule_function SQLCODE=100 SQLERRM=ORA-01403: no
    data found
    Event Error Stack: WF_Event.dispatch_internal()
    In addition, during the set-up of Oracle Approvals Management, there was no available list of
    values in the Notification Style in the workflow configurator page.
    Action Plan
    =======
    1) Confirm if the workflow is customized in any way.
    2) Confirm whether you are able to select global preferences for the other invoices approval, meaning are you
    getting the list of values for the other invoices.
    There are no workflow customizations. We are trying to implement it to AP invoice
    approval only.
    Can you instruct me on how to test this one? I thought I could only select the global preferences from the workflow configuration window. And there are no distinction as to which invoice approval
    process it is applicable. Where could I select the global preferences for other
    invoices approval?
    Thanks a lot

    thanks hussein , but still we can not see LOV values even if we inserted data manually...:(
    But it has improved and we moved on to another error which is:
    *****received the error message:3120: Activity 'APINV/52822' has no performer
    ### Problem description or inquiry details ###
    Received the following error message:
    Error Message
    3120: Activity 'APINV/52822' has no performer.
    Error Stack
    Wf_Engine_Util.Notification_Send(APINV, 115191_1, 52822, APINV:APINV_MRA) Wf_Engine_Util.Notification(APINV, 115191_1, 52822, RUN)
    Encountered the following:
    No list of values in the notification style field in the global configuration region in the Workflow Configuration Page
    Please note that we could not update the workflow configuration page using the forms because there
    is no list of values to select in the above-mentioned field. We just recently
    changed the workflow administrator role from SYSADMIN to KCAALIM to reduce
    changing of user log-in. We have previously used the sysadmin user log-in to
    access the workflow configuration page. there was still no list of values for
    the notification style. we changed the wf admin role to kcaalim using the sql:
    udpate wf_resources set text = 'KCAALIM' where name like 'WF_ADMIN_ROLE';
    Commit;
    Hence, changing of wf admin role and user log-in (to sysadmin) won't help (just in case you would advise me to do so) since we tried it
    already.
    ### Responsibility and navigational paths to reproduce ###
    1. set-up the AME for ap invoice approval.
    2. test an actual transaction.
    3. when the list is generated, set-up workflow for AP approval.
    when setting up the configuration page, there is no list of values available for the notification style. hence the workflow
    configuration could not be updated.
    4. Run the required programs (i.e., synchronizations)
    5. run the approval workflow from the developer studio page.
    6. review the status from the Status Monitor page.
    7. The error message appears
    8. payables, create a sample invoice.
    9. validate and initiate approval.
    10. review the approval history to find out the required approver. (the approver's name appears with 0 amount of approval)
    11. check the notifications in the required approver's worklist.
    12. there are no notifications sent.
    Text continued in next action...
    **** screen shots availble >http://rapidshare.com/files/176008682/error_-noperformer.doc.html
    Thanks again...

  • Strange error message when building dvd

    Hi
    I have a dvd project, at about 80% progress of the build, I get the following error
    Has anyone got any idea what this may be.
    Many thanks
    Chris Anderson

    Hi
    Thanks for your reply.
    I do have a blu-ray burner, and i was creating a image, the error came up during the transcode. I have 12gb memory - what do you mean by tons ? is 12 enough.
    I am working with avchd 1920x1080, that i have successfully used before.
    I would then intend to burn the iso file afterwards, so the error is purely in encore, not relevant to burner as such
    I did actually go the AME route, then import into encore and it worked fine, so it appears the transcoding in encore is the issue.
    It would be helpful offcourse if the error message gave more info or what stage it was at at the time of the error.
    Thanks again
    Chris

  • AME Error - Name   lacks a supervisor, so AME cannot complete the chain

    Hi,
    If any one aware of this Issue, Please lets help & Guide me
    While i do the Run Test Case (2) in AME .Its giving a below error message.
    Error: <Name> lacks a supervisor, so AME cannot complete the chain of authority for the transaction
    Regards,
    senthil

    Senthilkumar Chellamuthu wrote:
    Hi,
    If Any one aware of this Issue.please revert back.
    Regards,
    senthilIn addition to the above doc, please see:
    Transaction Fails With "<requestor> lacks a supervisor, so AME cannot complete the chain..." Although TOP_SUPERVISOR_PERSON_ID Is Specified [ID 728725.1]
    Quote Approval Returns Error in ASO_APR_INT.GET_ALL_APPROVERS [ID 452009.1]
    R12: AME Does not Send a Notification to the Preparer if No Approver Found GET_NEXT_APPROVER_AME Exception [ID 557718.1]
    12: AME Does not Send a Notification to the Preparer if No Approver Found GET_NEXT_APPROVER_AME Exception [ID 557718.1]
    R12: AME Contingent Worker Not Able To Create Requisitions Fails At GET_NEXT_APPROVER_AME [ID 781794.1]
    Got Error When Using Hr_approval_custom.Check_final_approver And Hr_approval_custom.Get_next_app [ID 1321264.1]
    Thanks,
    Hussein

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

  • Error message into a Variable.

    Dear users,
    I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
    My requirement is like this:
    I have a message class in which I want to define a text 'Employee number & not found'.
    I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
    So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
    lv_text = e0xx(messageclass) USING '1234'   which stores the text 'Employee number 1234 not found' in lv_text.
    How would I acheive it??
    Thanks, V!

    Try tis way
    message e999(00) with i_emp-empno into lv_text.
    press f1 in message will provide you more details
    a®

  • IPod seen by windows, not by iTunes+ weird error message

    I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
    and why is there no email adress from apple for service qustions? 10x

    I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
    Did you read the document i linked you to? here's another link to it:
    Putting iPod into Disk Mode
    whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
    ... never mind ... i guess you've fixed it anyway ...

  • Error message iPod cannot update b/c all of the playlists no longer exist

    Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
    PC   Windows XP  

    hiya!
    And my playlists are still on the left side in my iTunes. They do exist.
    let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
    is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
    love, b

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • IPod Error Message: "The disk could not be read from or written to."

    Hello!
    I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
    I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
    Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
    Any help would be greatly appreciated. Thank you in advance. ^_^
    PowerBook G4   Mac OS X (10.4.3)   15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

    Okay I went thru that entire list and here's what I got...
    (1) My OS is XP and is running fine.
    (2) I've updated my windows
    (3) I don't know of any software that might be interfering.
    (4) There are no damaged files.
    (5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
    (6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
    (7) The USB cord is firmly connected into my USB port and my iPod
    (8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
    (9) I will try another USB cord to see if that works.
    Is there anything else that I can do? Can Apple fix this?
    Please let me know.

  • IPod Touch will no longer sync...error message.

    For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone? 

    What is the exact wording of the error message?

Maybe you are looking for