Amount value after doenloading to excel displayed as "2,100.00"

hi,
i have alv report which displays o/p as
C1R-00001 1514 5,720.00 c1r-00011-21 5,720.00
here when i download to excel the value 5,720 is displayed or downloaded as
"5,720.00" so i am unable to upload the downloaded file into bdc as it is not abe to interpret.
suggest some conversion routine or shall i need to change the itabs declation type.
thanks!

Hi,
One thin that u need to keep in mind while upload is that all the fields in the internal table must be character type.
If u upload 5270.00 in Character type, it wont give any error.
Regards,
Himanshu

Similar Messages

Missing characteristics value after exporting to excel

Hi
I created a web template with WAD 7.0 that is using a button with Export to Excel functionality.
The issue i have is that if I export to Excel, I don't see the characteristics/filter values e.g
Cal. year / quar
Company Code
Fiscal year/period
Vendor
Vendor Account Group
Structure
It displays only the data.
How do I get these characteristic values do display in excel.
thanks

Hi,
thanks for your response. I have checked and couldn't find options for select Analysis grid or Filter grid.
In the button, I used command * Export web application* and in the parameters I could find anything close to choosing the options you mentioned.
thanks

Changing Budget amount values after the budget is released in Compensation.

Hello All-
Is there a way to change the budget amount in a budhget unit in Compensation management once its released? The budget value once released goes into Infotype 1520 Final Budget. Is there a way to change that value? I tried using PP01 and PP02 but I can not see the value to change it.
Thanks-
Chakri.

HI,
You can not change the budget value once it's ben released.. you can create a new budget and tag it to the compensation adjustment.

Re: Display comma in a amount value.

Hi experts,
My requirement is i want to to display the comma in amount fields in script.
i was declared one internal table with 5 fields , in that 3 fields are amount fields , these 3 fields also i was declared as type char, because i have to do some calculations and add some text after the amount.
Here my problem is i want to display the amount value with commas and with out decimal places (12,34,500) like this.
i was removed the decimal places using 'MOVE_CHAR_TO_NUM' functin module , but i am not able to add the commas for the amount field , can any body let me know how to do this.
Thanks in advance.

Hi..
You can give these amount fields type as some standard amount fields instead of char.
For Example. for netprice you can give..
data: begin of it_itab,
netpr type ekpo-netpr,
end of it/-itab.
Regards,
Vishwa.

OBIEE-Values after decimal changing after download in excel format

Hi,
I have reports in OBIEE 11g,in which some columns have values in %.When i try the various export/download functions and noticed that the Excel download did not maintain the fomatting for pecentage values, they fields go out to about 12 decimal places or so.
For eg..if a value in report is like 12.54
After export in Excel it looks like 12.546780393345 .
As i want the same format,pls suggest the solution.

Hi,
Refer below link:
Downloading to Excel with three decimal precision
format problem while download to excel
Re: Formatting problem in download report into EXCEL Sheet
BUG:
•9107277 KEEP THE NUMBER PRECISION IN DATABASE WHEN “DOWNLOADING TO EXCEL”
Thanks
Deva

Webi displays null and wrong values after BW upgraded to SP6

Hi,
Webi report retrieves blank values after BW Backend upgraded to SP6.
We were on SAP EHP 1 for SAP Net Weaver 7.0 and SP4. On the BO side we are on BO XI R/3 FP 2.1.
Once we add new filters to a simple webi query the webi displays the null values for the characteristics which already exist in the report and more ever wrong values displayed for few columns. We have checked the MDX query in BW by using 'MDXTEST' and the results are good.
It looks like that it is a rendering issue in Webi side and exactly no idea...
Can anybody know how to fix the issue or any SAP notes exists for resolving this?
Thank you,
Regards,
Satya

Hi Ingo,
We are also facing the same issue that satya is facing.
We have developed the reports in BO XI 3.1 SP2 FP2.1 and SAP BW 7.01 EHP1 which was running correctly and showing the right result.
But we upgraded the BW system to SAP BW 7.01 SP6 and check the WebI reports which was showing the unexpected results. ( instead of n rows it shows only 1 row for any query without dimension values)
So we upgraded the BO sys to BO XI 3.1 SP2 FP 2.6 and checked the result but no luck with that also.
The workaround i found is i must need to add the Node objects from the universe in the Query which are also used in the query filter of Web Intelligence. But this is not reliable as we need to change all the developed queries.
We have also tried to perform the things shown in the notes but no MDX trace is enabling.
Please let me know if there is any other solution.

Exception Aggregation (Average) displaying incorrect values after EHP1 Upgr

Hi All,
Exception Aggregation (Average) displaying incorrect values after EHP1 Upgrade in our BW system
We have recently upgraded the system to EHP1. After the upgrade some of the queries where we are using Exception Aggregation (Average) started giving the incorrect values.
Eg. We are displaying three Key Figures KF1, KF2 and KF3 (=KF1 %A KF2) against Store Hierarchy. In KF3 we are using Exception Aggregation (Average) on a characteristic 0PLANT.
There are 14 rows against 0PLANT and out of those 2 rows are blank for KF1, so for KF3. When it is calculating the average of these key figures its dividing the total value by 12 instead of 14 which is not correct in our case. Earlier it was dividing the total by 14.
So in this case 'Average' and "Average of all values <>0" are behaving the same way.
Kindly provide some inputs on this.
Best Regards,
Sachin Verma
+44 7506740018

Hi,
Thanks for viewing the thread. And happy to let you know that the issue was resolved.
The solution was:
Two formulas (local) were created, one including the formula variable with replacement path for ZD1, with exception aggregation on ZD1, and the other with formula variable with replacement path for ZD2, with exception aggregation on ZD2. Both these formulas are hidden.
Another formula (local) was created for u2018time takenu2019 = formula with ZD1 u2013 formula with ZD2, with exception aggregation total on u2018ZDOCNOu2019.
For the second instance, when one requires exception aggregation on records that has multiple values for keys, a nesting of formulas can be done displaying only the ones required.
For e.g. a formula with exception aggregation on say characteristic u2018item no.u2019 can be hidden, and included in another formula for exception aggregation on characteristic u2018document no.u2019. This is a typical case where one can achieve calculation before aggregation for a calculated key figure, formula or a counter.
Hope it might help someone, and saves time and effort for a similar issue posted.
Also would like to keep this thread open for exploring better solutions.
Regards,
Vijay

How to give a page break in alv grid display after 65 lines are displayed?

hi all,
I need to give a page break in alv grid display after 65 lines are displayed on each page...Please help me with this...

hai
give this command beging of the report name... u have to diclar the beging of the report ......
report ( name of the report) standard page heading line-size 200 line-count 65.
ex1.:- report name is rtpm_trl_show_flows
report rtpm_trl_show_flows no standard page heading line-size 200
 line-count 65.
ex:2
report zlpur01 no standard page heading line-size 200
 line-count 65.
type-pools: slis.
tables: bkpf.
selection-screen begin of block sel with frame title text-001.
select-options: s_comp for bkpf-bukrs, " Company
 s_valut for bkpf-budat. " Invoice Date
 S_MTART FOR MARA-MTART. " Material Type
selection-screen end of block sel.
parameters: p_vari like disvariant-variant. " ALV Variant
constants: formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
data: i_bseg type bseg occurs 0 with header line.
data: vatval type p decimals 2 value '0.15'.
data: xhkont type string value '154000'.
data COM type c.
data: begin of invt occurs 100,
 budat like bkpf-budat, " Inv Dat
 bukrs like bkpf-bukrs, " Material
 STCEG like bsak-STCEG, "name of the companycode
 belnr like bkpf-belnr,
 xblnr like bkpf-xblnr, " Inv Reference
 ebeln like rseg-ebeln, " PO number
 lifnr like bseg-lifnr, " Vendor No
 name1 like lfa1-name1, " Supplier Name
 matnr like bseg-matnr,
 maktx like makt-maktx,
 stcd1 like lfa1-stcd1, " Supplier VAT REG NO
 xamt like bseg-dmbtr, " TAX amt
 yamt like bseg-wrbtr,
 wrbtr like bseg-wrbtr, " Base amount
 mwskz like bseg-mwskz,
 dmbtr like bseg-dmbtr, " TAX amt
 gjahr like bkpf-gjahr,
 hkont like bseg-hkont,
 zamt like bseg-dmbtr, " TAX amt
 wamt like bseg-dmbtr,
 shkzg like bseg-shkzg,
 shkzg1 like bseg-shkzg,
 end of invt.
regard
nawa

Update SAP tables after ALV report is displayed

Hi All,
I have to display a ALV report using function module REUSE_ALV_GRID_DISPLAY.
After the report is displayed, user can edit some of the flds in the report, and the fields need to updated in the table. How do I proceed to accomplish this.
Is it possible to use FM 'REUSE_ALV_DRID_DISPLAY' to do this or we need to use OOPS ALV to do this.
I searched for this in this forum, but couldnt get.
Thanks in advance,
Ananth

You can use the REUSE_ALV_GRID_DISPLAY. and can make it a changable. You can specify the column to be changable. Once the user enters data into that coloumn the interna table automatically gets populated with the values.
I have done a similar program. However you might need to copy some standard GUI status based on your requirements.
Whats ur mail ID. I can send you the program I have developed.
Shreekant

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

Calculation of Depreciation on Net Book Value after posting Revaluation on

How to calculate the depreciation on Net book value after posting Balance sheet revaluation ABAW? The depreciation is been calculated on APC and not on NBV, as the APC of asset has been revalued after the revalution posting, ideally the next period depreciation should be calculating on the new NBV, but the system is not doing this. Is there any specific configuration that Iam missing here.
Kindly Reply.
Jyoti

The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials - Asset Accounting|SAP ERP Financials - Asset Accounting; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Picture disappears after exporting to Excel and saving.

Afternoon,
I appologise if this question has been asked before, but I did try search past posts.
I am using CR4E, the latest version.
I have designed a report with a Logo in the Page Header. (JPG). If I export the report as a Excel Report (Page Based), the
Picture is displayed as expected.
I can open and close the Excel Report as many times as I want and the picture remains. BUT as soon as I make a change to the
spreadsheet, and save, the Picture disappears.
I have tried using a BMP file, but still the same, I have tried having the picture in different sections but no luck.
If anyone has any ideas as to how I can keep the picture after saving the Excel version I would be greatly in your debt.
Cheers
Darren

Morning,
I have managed to find a work around, although I am not 100% why it works but it does.
I was unable to find a solution to the problem using the Eclipse version of CR, but I found a version of CR2008 at the office, and
using that, inserted a OLE Object attached to my Logo (JPG) and placed this OLE object on the report. My original Picture of the logo was left in its correct placement.
With this OLE Object, it appears that I am not able to export the XLS file and then manipulate the spreadsheet and save as many times
as I wish and the logo remains.
The only issue I have with the OLE Object, and this is probably down to my lack of knowledge, is that the Object contains
a text reference to the file name "Company_Logo.jpg" and that it. It does not display the picture or anything but the text.
I am then unable to hide this text or change the colour of the font to "hide" it. What I have had to do is make the object as small
as possible and place it in the bottom right corner of the report and hope no one notices it
So as you can see my solution is not the greatest but it is working.
Krishnan, I tried you suggestion of moving it the picture object back and forward did not help, and then your File Export Options
idea is not possible in Eclipse Crystal Reports (not that I could find). What version of CR would you be refering to?
Thanks for the suggestions/help.
Cheers
Darren

Reg SAL List Viewer to EXCEL Display (not excel downlading)

Dear Gurus,
I want the output in the excel sheet . I do not want to download it as a excel file.Only Excel output display i want.I think std SAP converts the output in to Excel display when you select " Excel Sheet " option at the header level in the reports. But I am not getting this in my PRD server for all reports. Is any layout Do I have to set for this Excel display option also?? Please let me know.
I wanted to attach those screen shot. But could not find the attach option in this forum. How to attach them ?
Regards,
Pravs.

Dear Praveen
For standard SAP report ,after executing the report ,the data will be displayed in AVL grid format or basic format .
Select the Excel icon which is near to Sum icon
now select all varialble format - then option Excel ( in existing XXL format)
now select table radio button
You will get report in excel format on the screen
Hope this will solve your problem .
also Please mention specific T.code which you are using .
Regards ,
Vishwas.K
Edited by: vishwas.k on Mar 14, 2011 5:13 PM

Drill Down is not working after exporting to excel

Hi,
I have created a drill down report in SSRS . Its working perfect. But when I export it to excel, it is showing only the expanded nodes. But I want the same functionality which gives user to expand or collapse the nodes in Excel as well. Can any one please
help me with this?

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Hi, coding to display popup window after first alv grid display

hi
can anybody please send coding to display popup window after first alv grid display i.e. first the prog shows grid display and from grid display the user select the field and on the basis of field value i need to show pop up window in the first secondary window and then third popup window.
thanx
rocky

Hi rocky,
here is the sample code .hope this helps you.
TYPE-POOLS : SLIS.
DATA : GT_OUTTAB TYPE VBAK OCCURS 0,
 GS_PRIVATE TYPE SLIS_DATA_CALLER_EXIT,
 GS_SELFIELD TYPE SLIS_SELFIELD.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA : ITAB TYPE TABLE OF SLIS_SELFIELD,
 WA_ITAB LIKE LINE OF ITAB.
START-OF-SELECTION.
PERFORM POPULATE_GT_OUTTAB.
PERFORM GET_POPUP.
PERFORM POPULATE_ITAB.
PERFORM FIELDCAT.
PERFORM DISPLAY_DETAILS.
*& Form FIELDCAT
 text
--> p1 text
<-- p2 text
FORM FIELDCAT .
LOOP AT ITAB INTO WA_ITAB.
WA_FIELDCAT-FIELDNAME = 'TABINDEX'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-SELTEXT_L = 'TABLE INDEX'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'SEL_TAB_FIELD'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 20.
WA_FIELDCAT-SELTEXT_L = 'FIELD NAME'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'VALUE'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-SELTEXT_L = 'FIELD VALUE'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
ENDLOOP.
ENDFORM. " FIELDCAT
*& Form POPULATE_GT_OUTTAB
 text
--> p1 text
<-- p2 text
FORM POPULATE_GT_OUTTAB .
SELECT * FROM VBAK
 UP TO 10 ROWS
 INTO TABLE GT_OUTTAB.
ENDFORM. " POPULATE_GT_OUTTAB
*& Form GET_POPUP
 text
--> p1 text
<-- p2 text
FORM GET_POPUP .
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
 I_TITLE = 'SALES ORDER'
I_SELECTION = 'X'
I_ALLOW_NO_SELECTION =
 I_ZEBRA = 'X'
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_CHECKBOX_FIELDNAME =
I_LINEMARK_FIELDNAME =
I_SCROLL_TO_SEL_LINE = 'X'
 I_TABNAME = 'SALES ORDER'
 I_STRUCTURE_NAME = 'VBAK'
IT_FIELDCAT =
IT_EXCLUDING =
I_CALLBACK_PROGRAM =
I_CALLBACK_USER_COMMAND =
 IS_PRIVATE = GS_PRIVATE
IMPORTING
 ES_SELFIELD = GS_SELFIELD
E_EXIT = G_EXIT
TABLES
 T_OUTTAB = GT_OUTTAB
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_POPUP
*& Form POPULATE_ITAB
 text
--> p1 text
<-- p2 text
FORM POPULATE_ITAB .
WA_ITAB-TABNAME = GS_SELFIELD-TABNAME.
WA_ITAB-TABINDEX = GS_SELFIELD-TABINDEX.
WA_ITAB-SEL_TAB_FIELD = GS_SELFIELD-SEL_TAB_FIELD.
WA_ITAB-VALUE = GS_SELFIELD-VALUE.
APPEND WA_ITAB TO ITAB.
ENDFORM. " POPULATE_ITAB
*& Form DISPLAY_DETAILS
 text
--> p1 text
<-- p2 text
FORM DISPLAY_DETAILS .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
 IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = ITAB
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_DETAILS
award points if helpful.
regards,
deepthi reddy

Amount value after doenloading to excel displayed as "2,100.00"

Similar Messages

Maybe you are looking for