An icon of a hard drive appeared on my desktop with the firefox logo on it. what is this? it was as if i hard a thumb drive or another hard drive plugged in.
when i right clicked on it - it gave me the option to eject the icon.
what is this
how did it come up
hello, these are probably the remnants of the firefox installer - please refer to [[Install Firefox on Mac]] on how to properly install the browser on os x...
Similar Messages
-
The apple icon appears every 15 seconds but the iPhone never boots. What does this mean?
The iphone 3GS was in an otter box--in a pocket--and went in a mudbath for a couple of minutes. Yes, really. None of the water sensors turned pink on the phone and now, two days later, the apple icon pulses on and off every 15 seconds when the phone is hooked into a USB cable to charge. What does this mean and what should I do?
It looks as if there's a problem with your GPU. With a Retina machine, that would mean replacement of just about everything, except, perhaps, the flash storage drive.
Print you kernel panic when you go to your Apple Store appointment. I'm betting that it's a faulty GPU but they will be able to diagnose exactly where the problem lies.
Good luck,
Clinton -
My 5th generation nano appears to have frozen. It only shows the apple logo and will not switch off. It is also now not recognised by my computer. I have downloaded the latest itunes but that has made no difference.
Any suggestions?Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?
verify on another Mac if the same
WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
SATA card issue
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
verify on another Mac if all possible -
I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?
Yes- it is a Mac. I went through adobes system requirements and re- downloaded supportive software. The notice seems to happen near the end of the down load with the messages above. I'll look into your suggestion. Thank you- appreciated.
-
My Iphone 4s is plugged in charging after it has fully died. Instead of the apple appearing and staying constant on the screen...the apple is blinking. What does this mean and how do I get the phone to charge/turn back on.
- Try:
iOS: Not responding or does not turn on
- Next try letting the battery fully drain. After charging for a least an hour try again
- Last, make an appointment at the Genius Bar of an Apple store, it appears you have a hardware problem. -
I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!
If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD
-
Hey
I don't know if my mac book air is frozen, but the screen is gray with the apple logo in the middle of the gray screen, with the 'booting' icon turning round and round. I have switched it off fron both the power and power button on the computer, it goes off, when I put it on, same screen comes on again. Help Please!Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?
Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS. -
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?
The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper. -
my macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?
Try this.
Erase and Reinstall OS X
Note: This will delete all data on the disk. Back up important files before continuing.
Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads.
Select Disk Utility and then choose Continue.
Select your startup disk (Macintosh HD by default) from the left.
Select the Erase tab.
Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X and then choose Continue.
Follow the instructions.
I hope I solved your question.
Austin -
Whenever I try to download an app [from the app store on the computer], a popup message appears saying 'A server with the specified hostname could not be found'. What could I do to resolve this? I am using a MacBook Pro laptop. There is around 250 gb of free space. Please help
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try to update. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
I recently restarted my iphone and now all that appears is the apple logo how do i fix this problem
i recently restarted my iphone and now all that appears is the apple logo how do i fix this problem?????
Plug it into your computer and restore it.
-
My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Please help me. Some of the websites show thier icon normally.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3Yes, it doesn't work. I ran in safe mode. nothing changed. I uninstalled Mozilla firefox with only standard removal, no change. I finally uninstalled Mozilla with complete removal and reinstalled it, then it return to normal. Why does this happen? Thanks for your reply.
Maybe you are looking for
-
Error message while installing Vista
I have got a windows vista installation disk now, I am trying to install it but when I am trying to install it, I have a message which says that I need to delete these items: o The Sims 2 o Intel PROSet/Wireless o TOSHIBA Direct Disc Writer Format Ut
-
What shows in color separations is not what prints
I have a document originally created in InDesign CS3 with text in a 100%K black, not rich black. When printed directly from InDesign, text prints with only black ink. When I export to PDF, with black settings to output accurately (not rich black), th
-
648 max, Win98 NDIS.vdx driver prob?
Just installed Win98 on my new 648 Max. It installed ok, but on statup it says error: NDIS problem (forget the exact wording), you must restart computer. I bypassed NDIS.vdx with safe mode step by step start, and removed Dial up Network in control pa
-
How to compare two currency form fields and display a message if the fields do not equal?
My form has 2 fields named Total_1 and Total_2. If one of the fields does not equal the other, a hidden field will display a message in red on the form alerting the user. Otherwise, the message does not display. Looks like a validation script but I w
-
Panel value fields - changing values lost feature
In previous versions of InDesign, if you clicked into a panel value, e.g., in the Height Field of the Transform Panel, you could then use the up/down arrows to nudge the value in preset increments. When you used the arrows, this would automatically