An important problem about Purchase

Hi,i use Pre-payment Card (Which trade is Inial) in App Store.Despite of i did not download any Application in 17 Augst,App Store took 2.27$ on my card?How can i solve this problem?Who can help me?

You've checked your account's purchase history to see what it was for : See your purchase history in the iTunes Store ?
If you don't recognise the charge, and nobody else has access to your account or devices and made it, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Similar Messages

İ have just got ios 5.1 for ipad but i have really important problems about charge,how could i get ios 5.0.1 without loosing my items,documents,i can't sync because my computer has problems also,thanks

İ have just got ios 5.1 for ipad but i have really important problems about charge,how could i get ios 5.0.1 without loosing my items,documents,i can't sync because my computer has problems also,thanks

Settings>general>reset>reset network settings
Settings>general>reset>reset all setting

Problems about purchases history.

I bought brains on Zombie Farm and the company already provided for me but now on itune shows that the company was unable to authorize my payment card and i need to pay the outstanding balance of those brains and i still own about $12. Please tell me what happens...

same with me, Now Do you already fix this problem?

A Important problem about CMS Transport Studio Test Tab

Hi experts:
    I am use NWDI and modify ESS source code, when i check in my modified project like esstratre and release it . In CMS transport studio i consolidation , assembly it then test it .but i make a fatal mistake,there is some mistake in project esstratre but i already check in it .So in the Test tab SMD deploy failed.
   Now i want restore the history version before i modify the project . But what can i do? Please help me.Thanks a lot.
                         yours zunxian

HI,
there is some mistake in project ess~tra~tre but i already check in it
1. can you check out your DC and correct those changes? and check in it.....its the best solution.
    and good for you , so you can keep some needed changes, present in that activity.
2. in DTR perspective there you can see versions in the version graph view.
3. or use sync to date option for your DC.
But the 1st option is preferable as a developer.

I can't report problem in purchase history

sorry someone help me pls.
i want to report problem about purchase history ( Line sticker billing me twice ) then i click report, its going to -> Apple support
thank you for all
...Beer**...

Do they appear in the iTunes Store > Purchased section? (Use the search tool.) If so delete from iTunes, close iTunes and restart, then download from iTunes Store > Purchased > Not on this computer.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
tt2

How to find import and local purchase order for report

Dear Friends,
Please help me in coding this report, =below is the functional requirement.
1. To find the list of Import or Local Purchase Orders(purchase orders to be procured from another country).
2.Once the import purchase order is selected .The report sould display the PO number ,Currency , Value , po Date , Planned recipt date ,
BUy from vendor , ship from vendor , Origin Country, Destination country, and Status of the PO.
I am clear about the PO number Currency ,value and po date but could not get how do i fetch the details like:--Planned recipt date ,
BUy from vendor , ship from vendor , Origin Country, Destination country, and Status .
Your help is greatly appreciated.

Hi,
Buy from vendor is the real vendor who is supplying the items while Ship from vendor is the vendor who just arrange for the transport. This should be maintained in the pruchase order, just consult with your MM consultant to get where they are storing those details
Regards
Karthik D

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

Final Cut Pro/GY-HD111E import problems?

Final Cut Pro/GY-HD111E import problems?
With a brand new Mac Pro and very latest Final Cut Studio complete with updates I'm having a little problem trying to import footage directly from a JVC GY-HD111E (yes I'm in PAL land, UK) via FireWire into FCP.
Footage is 720p/25p and timeline is set up in FCP that way.
I'm doing a 'capture now'. The first clip I'm trying to import is about 45 minutes long with no cuts/breaks whatsoever.
What happens is after about 60 seconds or so, it FCP automatically breaks the clip for no reason and starts a new one, trouble is, when it does this I lose about 4 seconds of footage at that point.
It continues to break clips randomly, sometimes after 40 seconds or so, sometimes after 95 seconds, but usually between 30 seconds and 2 minutes and each time it starts a new clip I lose between 1 and 6 seconds.
As I say, there are zero breaks or cuts in this clip, I have a 45 minute clip that was shot in one take, not even a pause anywhere.
Is this a JVC issue or a Final Cut issue?
It's a pain as it simply means I can't import my 9 hours of footage hence I can't get on with this project.
Any ideas why this phenomenon is happening?
Thanks guys.

I mean I get the same errors.
Let me explain again.
There are NO start/stop/pauses in this clip.
I'm trying to import just ONE clip with no breaks, again, there are NO start/stop/pause, it is one continuous clip of 15 minutes duration.
The JVC creates some sort of errors at the Firewire output stage, it drops frames or other errors, FCP gets confused and creates a new clip, even though it is the same clip, but due to the GoP structure, it looses a few seconds too hence I can't import the footage as I keep loosing bits here and there mid clip. It is randam, every 30 to 100 seconds or so it will do this.

HT5731 WILL NOT ALLOW ME TO DOWNLOAD A MOVIE THAT I HAVE A DIGITAL COPY FOR IT GIVES ME A MESSAGE ABOUT PURCHASING A HD VERSION VS SD VERSION

WILL NOT ALLOW ME TO DOWNLOAD A MOVIE THAT I HAVE A DIGITAL COPY FOR IT GIVES ME A MESSAGE about purchasing a hd version vs the sd version

Hello everyone,
I was having the exact same, irritating, problem. The only way I was able to work around this lovely little quirk was to redeem the code on my iPod touch. I would guess it would also work on any apple touch pad device. I only had to input the code once and it began downloading. I was then able to go back to my iTunes on PC and it began downloading there too.
*Sidenote: Be sure to uncheck the "Download HD when available" option.
I hope this works and helps the rest of you.

Annoyed with JVC/Final Cut Pro import problem; will they ever fix this?

Annoyed with Final Cut Pro JVC import problem; will they ever fix this?
I've shot footage on JVC GY-HD111E in the UK in 720p/25p PAL mode.
I'm trying to import lots of short clips (average 10 seconds) into Final Cut Pro (latest version with 720p/25p support) with a new Mac Pro maxed out with ram and 3 extra internal HDs.
Problem is, on a scene-break i.e. pause/stop, Final Cut detects this and creates a new clip, but it takes about 5 seconds to 'searching for media" before it starts the new clip. Because some clips are only very short, this 5 second delay sometimes means I only get the final few frames of a clip, rather than the entire 5 seconds or so of it.
JVC UK are blaming Apple and are saying it is up to them to fix it as Premiere and Edius does not have this problem.
However, Symbiosis in the UK (who do HD-Connect box) say that the JVC ProHD cameras do not wrap the shots up properly at the end, they are kind of left open and this creates problems on scene-breaks.
I've tried turning off the "create new clip on timecode break" etc, but it does not make any difference, when I do this it simply quits capturing on a scene break. Besides I have about 300 cutaways like this and I don't want to spend the rest of the year breaking them up on the timeline as this would be a futile and long workflow.
I'm importing and working on a native HDV 720p/25p timeline and this is the way I want to work. I've already imported and edited 4 hours of footage, but these 4 hours were easy as all 4 tapes had no start/stop points, they were recorded continuously from beginning to end of tape for 64 minutes each time so importing was no problem; 1 clip per tape.
But now I've come to my 5 tapes containing hundreds of cutaways I'm kind of screwed and need some advise on how I can import them natively in HDV without losing this 5 seconds off the beginning of each clip whilst FCP searches for the media each time.
I've been told this issue is definately with FCP, any ideas how I can get around this?

I haven't heard of this JVC/FCP problem, so I can't comment on it. However, whoever shot the cutaways didn't do you, the editor, any favors.
I've been doing video since 1984, and I've got to say, anyone who shoots a scene that is only 5 or 6 seconds long on tape is making a huge mistake, and it's been that way since the beginning of computerized editing in the late 70s.
Shoot at least 5 seconds of pre-roll before the shot begins, then roll tape for at least 5 seconds after you've got the shot. That's the protocol I've followed for 22 years now. Tape is cheap, edit suite time isn't.
But laying down only 5 to 6 seconds for a scene is wrong, IMO.

Import problem with DMP file

Hi all
I am using oracle 9i and I have problem in import problem.........
when i try to import the DMP file it gives me the error,
IMP-000200: long column Too larege for column buffer size <22>
can any body please tell me how to get out of this error....
actually I have a table in export file that has round about 2 lac rows....
The problem occurs on that table.
Any help will be highly appreciated
Thanks in advance
Regards
Shayan
[email protected]

The correct error code is IMP-00020 not 200
What's your current buffer set to when imp?
IMP-00020: long column too large for column buffer size (number)
Cause: The column buffer is too small. This usually occurs when importing LONG data.
Action: Increase the insert buffer size 10,000 bytes at a time (for example). Use this step-by-step approach because a buffer size that is too large may cause a similar problem.
As adviced, increase 10000 and try again.

Special Problem about XML schema simpleType definition

hi, OracleTeam,
hi, Bruno,
Fiena comes again :( :p
It seems you do not use Oracle schema processor . I met a problem about schema ...
here is test1.xsd
<?xml version="1.0"?>
<schema xmlns = "http://www.w3.org/1999/XMLSchema"
targetNamespace = "http://www.sample.com"
xmlns:vs ="http://www.sample.com">
<element name = "Test" type= "vs:test" minOccurs ="1" maxOccurs="1"/>
<simpleType name= "test">
<restriction base="integer">
<minInclusive value="-1290"/>
<maxInclusive value="29035"/>
</restriction>
</simpleType>
</schema>
here is test1.xml
<?xml version="1.0"?>
<video:Video xmlns:video="http://www.sample.com"
xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
xsi:schemaLocation="http://www.sample.com test1.xsd"
>
<Test>11</Test>
</video:Video>
but when I validate the two files with schema processor , it will said :
Validation failed, error 909 ( not parer, but schema processor)
I don't know why everytime I define "simplyType" , it will show this error...
Thank you no matter you can answer me :)
Best wishes,
fiena
null

Thank you,
I do understand it,
but why or when it is necessary to have this structure ?
I ask because I found simple exsamples of XML-Datafiles without this :
like this example
<A31>
<HEADER>TEST HEADER</HEADER>
<MASSNAHME>NR_10-0009/02-A07</MASSNAHME>
<TEILMASSNAHME>
<LFDNR>1</LFDNR>
<STT3X>dies ist text 1</STT3X>
</TEILMASSNAHME>
<TEILMASSNAHME>
<LFDNR>2</LFDNR>
<STT3X>dies ist text 2</STT3X>
</TEILMASSNAHME>
</A31>
in contrast to that :
<A31>
<A31_ITEM>
<HEADER>TEST HEADER</HEADER>
<MASSNAHME>NR_10-0009/02-A07</MASSNAHME>
<TEILMASSNAHME>
<TEILMASSNAHME_ITEM>
<LFDNR>1</LFDNR>
<STT3X>dies ist text 1</STT3X>
</TEILMASSNAHME_ITEM>
<TEILMASSNAHME_ITEM>
<LFDNR>2</LFDNR>
<STT3X>dies ist text 2</STT3X>
</TEILMASSNAHME_ITEM>
</TEILMASSNAHME>
</A31_ITEM>
</A31>
this creates finally different ( incorrect ) schema-files
to import into nested tables ?
Norbert

I'm trying to report a problem about a download which didn't work and I'm being charged for it.

I'm trying to report a problem about a download which didn't work and I'm being charged for it.

Store > View My Account > Purchase History > Report a problem.
Contact the store and explain the issue. They should be able to reissue your download or take whatever other steps are necessary to resolve your problem.
tt2

Import problem,pls help!

Hi,there,
I'm new guy here,I'v got a problem about Import in table mode,I found I can import back all records successfully, but it just appends all records into the orignal table,not overwrite
it,for example, I made a export for a table with 2 records, after then I added some records into that table,
finally I made an import for that table, I found the
total of records is not recovered to 2,but just append
the records from export file,why can't I recover it to 2
record? pls help me,thanks!

All that import does is to run a bunch of SQL statements based on the content of the export file. If you look at the export file in an editor (if its small), or through type (on Windoze) or more on *NIX you will see stuff like:
CREATE TABLE x STORAGE ( ...)
INSERT INTO x col12,col2, ...
VALUES (:b1,:b2, ...
If you give imp the paramter ignore=Y, then the error generated by the CREATE TABLE (table already exists) will be suppressed, but the ata will be inserted. Note that there are no DROP TABLE or TRUNCATE TABLE commands in the export file.
If you want to restore your database to a particular point in time using import, then you will need to manually drop or truncate the tables first. You can generate the required sql from the data dictionary. something like
SET lines 1000 pages 0 feedback off trimspool on;
SPOOL drop.sql;
SELECT 'DROP TABLE '||table_name||';'
FROM user_tables;
SPOOL OFF;
@drop.sqlHTH
John

Who do I contact after (emailing app developer) about purchased add ons that haves not arrived to my iPhone but the money has been taken!!??

who do I contact after (emailing app developer) about purchased add ons that haves not arrived to my iPhone but the money has been taken!!??

Hello Janey,
It sounds like there is an issue with the audiobook you purchased from iTunes. I recommend following the steps in the following article to report this to the iTunes Store:
To report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
You can find the full article here:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

An important problem about Purchase

Similar Messages

Maybe you are looking for