An issue while Configuring the Access System Console

I'm facing a problem while Configuring the Access System Console.
I have installed the policy manager, and when I try to configure the access system, an error message appears "The environment variable TEMP points to a directory that does not exist. To avoid any unexpected behavior, please make sure it points to the correct directory and restart the web server".
I have checked the temp system variable, and it was correct, and the directory already exist.
Note: I'm working on windows server 2003.
I really appreciate any help with this issue.

Check the permissions on the directory that the TEMP variable points to, to ensure that everyone has read/write access to it - maybe that's the problem.
Regards,
Colin

Similar Messages

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?

operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?
How to reproduce the issue：
1.Create a new PPT slide in Office2010.
2. Insert a certain text/characters, such as Mircosoft blablabla,
3. Insert an URL right after the text part , TextToDisplay is the “Test”，Address is the "Url".
4. The content in the ppt is ”Microsoft Test“，here "Test" is the hyperlink which we would like to convert. Please execute the code we list below.
5. The problem will be reproduced by the above steps.
PPT.Application ap = new PPT.Application();
PPT.Presentation pre = null;
pre = ap.Presentations.Open(mFileName, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (PPT.Slide mSlide in pre.Slides)
PPT.Hyperlinks links = mSlide.Hyperlinks;
for (int i = 1; i <= links.Count; i++)
PPT.Hyperlink mLink = links[i];
mLink.TextToDisplay = mLink.TextToDisplay.Replace(mLink.TextToDisplay,"url");
mLink.Address = mLink.Address.Replace(mLink.Address, "url");
Modify texttodisplay, the address vaule will be assigned as null. Anyone knows how to solve it?
Does it caused by a PPT API's Limitation?

I've tried the below code and it works, you can refer this article:
https://msdn.microsoft.com/en-us/library/office/ff745021.aspx
to find that the hyperlink needs to be associated with a text range, and thats what I did in the code below with the help of the link sent by Tony.
Microsoft.Office.Interop.PowerPoint.Application ap = new Application();
Microsoft.Office.Interop.PowerPoint.Presentation pre = null;
pre = ap.Presentations.Open(@"C:\Users\Fouad\Desktop\abcc.pptx", Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (Microsoft.Office.Interop.PowerPoint.Slide mSlide in pre.Slides)
Microsoft.Office.Interop.PowerPoint.Hyperlinks links = mSlide.Hyperlinks;
Microsoft.Office.Interop.PowerPoint.Shape textShape = mSlide.Shapes[1];
for (int i = 1; i <= links.Count; i++)
Microsoft.Office.Interop.PowerPoint.Hyperlink mLink = links[i];
Microsoft.Office.Interop.PowerPoint.TextRange range1 = textShape.TextFrame.TextRange;
TextRange oTxtRng = range1.Find(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay,After:range1.Start,WholeWords:Microsoft.Office.Core.MsoTriState.msoTrue);
oTxtRng.Replace(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay, "url");
oTxtRng.ActionSettings[Microsoft.Office.Interop.PowerPoint.PpMouseActivation.ppMouseClick].Hyperlink.Address = "http://www.microsoft.com";
Fouad Roumieh

Error "Test Agent could not connect to the test controller" while configuring the Test Agent on Client machine

Hi,
I am getting an Error “Test Agent could not connect to the test controller”
while configuring The Test Agent on Client machine.
Pre-requisite used:
VS2012 update 4, Test agent & Test controller of same version used
User has TFS admin access.
Same user id used for configuring Test Agent.
Description:
Test controller is installed on server A. I want to install test agent on client machine B.
Windows Fire wall is OFF on both Machines A & B. While configuring Test Agent below error is occurred:
“Test Agent could not connect to the test controller”
In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”
In Event viewer below error details given:
Unable to connect to the controller on ‘My Server: 6901’. The agent can connect to the controller but the controller cannot connect to the agent because of following reason: The requested name is valid, but no data of the requested type was found.
Make sure that the firewall on the test agent machine is not blocking the connection.
Could you please help me to find solution?
Thanks in advance!
Kanchan M
Kanchan

Hi Kanchan,
So on each computer, you create a local user account that is a member of the Administrators group, and use the same account and password on each machine(controller and Agent), am I right?
Could you enable the detailed log message?
http://blogs.msdn.com/b/aseemb/archive/2010/03/07/how-to-enable-test-agent-logs.aspx
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
>>In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”I
met a similar issue before which was related to the Firewall exceptions, maybe you could refer to it here:
http://stackoverflow.com/questions/12249093/test-agent-could-not-connect-to-the-test-controller-vs2012-agents
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-Jake

Hi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error in ODI while configuring ERPi Source system

Hi All,
Hyperion Version : Hyperion 11.1.2.1
OS: windows 2008
I'm getting the following Error in ODI while configuring ERPi Source system in workspace.
"942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist "
can anyone guide how can achieve this. thanks in advance.
Regards,
Ravi

Hi All,
Please find the below error log from ERPi configurator [Workspace] and let me know further steps to solve this issue....
ERPI Process Start, Process ID: 71
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Windows\TEMP\2\/aif_71.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Create Process Detail - Create Process Detail - START
COMM Create Process Detail - Create Process Detail - END
Error in Start PS HCM Setup Source System
java.lang.Exception: The scenario did not end properly.
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
ERPI Process End, Process ID: 71
Thanks
Ravi

Issue while configuring XLIFF as resource bundle

We are using Jdeveloper 11.1.1.7.0 ver. We are configuring ADF Faces project for XLIFF by creating xliff file in resources folder and adding xliff file to project properties.
In design time we are able to see the configured values when we use expression builder however, we are getting following exception at runtime:
java.util.MissingResourceException: Can't find bundle for base name UIRes, locale en
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1521)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1260)

I am getting issue while configuring report in integrated mode! The issue and the solution to that is as mentioned here.
I tried to set the Report Server Service account to Use Another Account
but when i try to apply i get the issue as below.
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC
---> System.Runtime.InteropServices.COMException (0x800708AC): The group name could not be found. (Exception from HRESULT: 0x800708AC)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
Kindly help!
I have the same error after a change in domain policies and after reconfigure the password of the domain account user used for the Report Server Service Account.
I don't use a group!!!
Thank You for any help!
Alessio

Issue while configuring Xampp

Hi Experts,
We are facing an issue while configuring Xampp. We have successfully installed Xampp but while selecting Admin Tab we are getting below error. We have release ports(25) and made the Windows Firewall OFF, still the issue exists. Can you please suggest us how to move forward...
Thanks in Advance..
Regards,
Krishna.M

I am getting issue while configuring report in integrated mode! The issue and the solution to that is as mentioned here.
I tried to set the Report Server Service account to Use Another Account
but when i try to apply i get the issue as below.
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC
---> System.Runtime.InteropServices.COMException (0x800708AC): The group name could not be found. (Exception from HRESULT: 0x800708AC)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
Kindly help!
I have the same error after a change in domain policies and after reconfigure the password of the domain account user used for the Report Server Service Account.
I don't use a group!!!
Thank You for any help!
Alessio

ERROR while saving the runtime systems(read time out exception)

Hi e xperts
I am configuring NWDI and assigned asll the permissions and roles to the CMS user.I created Domain,in landscape configurater
created track and saved.
while saving the rumtime systems the error thrown is
com.sap.cms.util.exception.conf.CMSCCBSCommunicationException: CBS (URL http://dtlepdev:54400/tc.CBS.Appl/archiveapi2/) communication exception: Read timed out (Service call exception; nested exception is:
java.net.SocketTimeoutException: Read timed out)
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.removeBuildspace(CBSConfCommunicator.java:382)
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.deleteCreateBuildspace(CBSConfCommunicator.java:338)
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.editBuildspace(CBSConfCommunicator.java:277)
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.createBuildspace(CBSConfCommunicator.java:168)
at com.sap.cms.pcs.conf.core.services.SystemManagerObject.saveSystem(SystemManagerObject.java:261)
at com.sap.cms.pcs.conf.core.plugin.DefaultTrack.newTrack(DefaultTrack.java:292)
at com.sap.cms.pcs.conf.core.TrackManager.editTrack(TrackManager.java:208)
at com.sap.cms.pcs.conf.manager.CmsConfManager.editTrackConfiguration(CmsConfManager.java:1002)
at com.sap.cms.pcs.conf.manager.proxy.CmsConfProxyBean.editTrackConfiguration(CmsConfProxyBean.java:489)
at com.sap.cms.pcs.conf.manager.proxy.LocalCmsConfProxyLocalObjectImpl0_0.editTrackConfigurationand also ..
Unable to instantiate a Build Space administrator!
Build Space "DTL_ETRACK_C" [bsID: 27, version: 0] [in-queue: on (privileged), out-queue: "on", processing: off]
<null>
[EXCEPTION]
Buildspace DTL_ETRACK_C does not own the workspace ws/ETRACK/dtl.com_DEFAULTIME/cons/inactive/ . It is currently not owned by any other buildspace
at com.sap.tc.cbs.server.rt.bs._BuildSpaceValidator.checkWorkspace(_BuildSpaceValidator.java:120)
at com.sap.tc.cbs.server.rt.bs._BuildSpaceValidator.validateWSs(_BuildSpaceValidator.java:74)
at com.sap.tc.cbs.server.rt.bs.BSAdmin.validate(BSAdmin.java:192)
at com.sap.tc.cbs.server.rt.bs.BSAdmin.updateState(BSAdmin.java:260)
at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.determineChanges(BSAdminOrc.java:439)
at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.validateBuildSpaceData(BSAdminOrc.java:219)
at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.act(BSAdminOrc.java:341)
at com.sap.tc.cbs.server.rt.impl.CourteousTimer.run(CourteousTimer.java:139)
at java.lang.Thread.run(Thread.java:534
In cbs i checked the parametrs they are open and on..
please suggest me on this ASAP..since 2 days i have been struggling and searched in forums..no perfect solution
help me out
perfect soln is immediately awarded...
I
THanks
Mayu

Hi Mayu,
here apparently the CMS cannot communicate to CBS properly and then when CMS tries to talk to CBS using a webservice, it times out due to various reasons, see below.
Strange, I always had this error when the CMS was on a different release like CBS and this caused the communication problem.
Don't you have an entry in your cms log like this?
com.sap.cms.util.exception.CMSUnexpectedException
at com.sap.cms.pcs.conf.manager.CmsConfManager.newTrackConfiguration(CmsConfManager.java:666)
Caused by: java.lang.IncompatibleClassChangeError
at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.openConnection(CBSConfCommunicator.java:84)
Please provide me the version of the DI_CMS, DI_CBS (and DI_DTR for the sake of completeness).
You can find this info on the ComponentInfo page.
On 640/700 this is http://<host>:<port>/sap/monitoring/ComponentInfo
as of 710 you find this on the "Components" tab of http://<host>:<port>/nwa/sysinfo
I also think that this is not due to the runtime systems. I guess you have the same problem if you try to create the track without runtime systems, right?
(The "Unable to instantiate a Build Space administrator!" is not necessarily an error, see the note:
#1175019 - Unable to instantiate a Build Space administrator!)
Thank you!
Best Regards,
Ervin

Issue while fetching the file through *.extension by FTP sender file adapte

Hello Experts,
I am facing a issue while fetching the data through sender File adapter with ' *.file extension' .I am illustarting the scenario as below .
It is a simple scenarion of File to File inboumd scenarion.Here file is getting picked up from a third party system
through FTP sender chanel and stored in a temp folder of PI through NFS rceiver file adapter .
The problem is however I am getting, while picking the file with file name as "*.exo"(where exo is the file extension).
But while fetching the file with particular name like"abcd_10032011*.exo"(file naming has been done by combination of abcd(always same)_currentdate(change according to current date)),file picked successfully .
So here ,in the prior case file not getting picked up,but in later case it dose .
Can anyone please let me know what might be the issue?

Hi Sunit,
Connect from your PI System to 3rd Party System (where are placed the Source Files)
FTP <PartySystemHostName>
eg. FTP 10.2.3.456 (then insert Username & Password to Login)
Go to source directory
cd \<SourceDirectory>
eg. cd \donaldduck\directory\
Execute a File List command
ls -la *.<extension>
eg. ls -la *.exo
In this way you should be able to view all files with this extension (*.exo), the same action that Sap XI perform to pickup the file.
Then, try to copy that file to your Local PI System (to check if there're some permissions issue):
mget <filename>.exo
eg. mpget File1_01012011.exo

Hyper-V encountered an error while Configuring the network on Vmachine

Hi all,
i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
Hyper-V encountered an error while configuring the network on Vmachine
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

Windows Server 201? Are you sure?
What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
Bill

How to configure the Access Server?

Hi All
I am in the process of migrating from 11.0.1 to 12.0.
I have some real-time jobs.
For this I need to configure the Access Server.
I can understand I should do this from Server Manager>Edit Access Server Config>Add
Here what info we need to give? Does it mean we need to give the server name on which current version is installed? How to choose the port?
My old version DI 11.0.1 is using port 4000. Also in the DS Mgmt Console, I am defaultly getting the Old Job Server in the Adapter Config node. How to remove this?
Someone plz help me on this.
Thank You
Ganesh Sampath

You have to explicitly share directories on external/secondary volumes.
Use the Server admin app to configure file sharing, and select which directory/directories on the second drive you want to share, then they'll be available to clients.

How do you authorize access to itunes while blocking the access of the rest of the computer?

How do you authorize access to itunes while blocking the access of the rest of the computer? I want to do a party and let people have access to the music but I don't want them to look in my files. I have windows 7.
I cannot log off and let the music play. Ideally I would want to have a password for access to the rest of the computer.
Thank you!

The following may help with the file sharing issues: OS X Mavericks: Share your files

Having issues while configuring JDI/ on my NWDS.

Having issues while configuring JDI on my NWDS.
I am logged on to Client's domain. Is there some setting thats required to be done in the hosts/service file which would ensure the same.
Please advise.

Hi,
Can you specify what issues you are facing ?
Thanks & Regards,
Meenakshi.

Performance issue while opening the report

HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.

Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande

An issue while Configuring the Access System Console

Similar Messages

Maybe you are looking for