An issue with multiple selection using Func mod COMPLEX_SELECTIONS_DIALOG
Hi All,
I am using COMPLEX_SELECTIONS_DIALOG function module to display mutliple selection pop up for materials.
The problem that Iam facing is that if a material is deleted in multiple selection pop up, it is not been returned in the returning table.Only the materials avalible in the pop-up are returned in the internal table.
Is there any way by which the deleted values could be tracked.
Pls find below the code
*Display the value in Multpl Selection pop up.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = 'Include/Exclude Materials'
TEXT = 'Pls select the materials'
SIGNED = 'X'
LOWER_CASE = ' '
NO_INTERVAL_CHECK = 'X'
JUST_DISPLAY = ' '
JUST_INCL = 'X'
EXCLUDED_OPTIONS =
DESCRIPTION =
HELP_FIELD =
SEARCH_HELP = 'MAT1'
TAB_AND_FIELD =
TABLES
RANGE = T_MAT_INCLU_EXCLU
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
Any help in this regard is highly apprecited.
Warm regards,
Partha.
Applogise for posting this thread under a wrong node - ERP HCM .
Closing the thread from this node .
Regards
Sarmistha
Edited by: sarmistha das on Mar 9, 2012 9:52 AM
Similar Messages
-
RSA1 Document - Issue with "multiple selection" Characteristic
Hi,
I have the following issue with a web template showing monthly reporting results (act/plan/var) for a specific cost center broken down following a cost element hierarchy.
My purpose is to attach each month some comments and these comments are made at the query level, not for each individual cost element.
However, as explained in note 501593, when creating my document, I have to restrict my cost elements since they are regarded as "multiple selections".
I could go and limit from 6 to one single value through table RSODADMIN but I never know for sure that this single cost element would always show up in my query.
In RSA1 > document > properties of the comment, is there any way for me to go and input a range for my cost elements, instead of having to enter cost element by cost element ?
Thx
StéphaneHi,
I have the following issue with a web template showing monthly reporting results (act/plan/var) for a specific cost center broken down following a cost element hierarchy.
My purpose is to attach each month some comments and these comments are made at the query level, not for each individual cost element.
However, as explained in note 501593, when creating my document, I have to restrict my cost elements since they are regarded as "multiple selections".
I could go and limit from 6 to one single value through table RSODADMIN but I never know for sure that this single cost element would always show up in my query.
In RSA1 > document > properties of the comment, is there any way for me to go and input a range for my cost elements, instead of having to enter cost element by cost element ?
Thx
Stéphane -
Port-channel issue with FI-N7k using rate-mode share
Hi Dears,
I'm trying to using port-channel between Fabric Interconnect (FI) and N7K. in N7K use rate-mode share and LACP but the port-channel in N7K was suspended.
I was trying :
1. I using non dedicated port in Nexus 7010.
- rate-mode share
- channel-group 1 mode active
- switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was suspended
2. I using non dedicated port in Nexus 7010
- rate-mode share
- channel group 1 mode on
- switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was came up, but in Fabric interconnect was failed.
3. I using dedicated port in Nexus 7010
- rate-mode share
- channel group 1 mode active
- switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was suspended
4. I using dedicated port in Nexus 7010
- rate-mode dedicated
- channel group 1 mode active
- switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was came up and running well.
is any other way to configure port-channel in N7K with rate-mode share and LACP ?
or it's some of limitation in port-channel when using rate-mode share at N7K ?
nb: fabric interconnect only support LACP and cannot be configurable.
regards,
Berwin HHI Mark,
1. Can you please check your ethernet card ...where this port channel connected..on the server.
may be there are 2 different card.
2. from cisco websites:
Error Message
Explanation
This port has different port attributes than other ports within the port channel.
Recommended Action
Match the port attributes to that of the port channel.
Regards
Please rate if it helps.
Match the port attributes to that of the port channel.This port has different port attributes than other ports within the port channel.
EC-5-CANNOT_BUNDLE_LACP: [char] is not compatible with aggregators in
channel [dec] and cannot attach to them ([char]) -
Trying to create table using Union All Clause with multiple Select stmts
The purpose of the query is to get the Substring from the value for eg.
if the value is *2 ASA* then it should come as ASA
where as if the value is *1.5 TST* the it sholud come as TST like wise for others too.
I am trying to execute the below written SQL stmt but getting error as:
*"ORA-00998 must name this expression with the column alias 00998.00000 - Must name this expression with the column alias"*
CREATE TABLE TEST_CARE AS
SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
WHERE LENGTH(old_care_lvl) =5
UNION ALL
SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
WHERE LENGTH(old_care_lvl) =7
UNION ALL
SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
WHERE LENGTH(old_care_lvl) =14
UNION ALL
SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3),LEN FROM test_care_lvl
WHERE LENGTH(old_care_lvl) =7 AND old_care_lvl ='Regular'
I want to create the table using the above given multiple select using the Union ALL clause but when trying to create run the query getting error as "ORA-00998 must name this expression with the column alias 00998.00000 - Must name this expression with the column alias"
Please guide me how to approach to resolve this problem.
Thanks in advance.When you create a table using a SELECT statement the column names are derived from the SELECT list.
Your problem is that one of your columns is an expression that does not work as a column name SUBSTR(old_care_lvl,3)What you need to do is alias this expression and the CREATE will pick up the alias as the column name, like this:
CREATE TABLE TEST_CARE AS
SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3) column3, len FROM test_care_lvl
WHERE LENGTH(old_care_lvl) =5
UNION ALL
SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
WHERE LENGTH(old_care_lvl) =7
UNION ALL
SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
WHERE LENGTH(old_care_lvl) =14
UNION ALL
SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3),LEN FROM test_care_lvl
WHERE LENGTH(old_care_lvl) =7 AND old_care_lvl ='Regular'
);You may not like the name "column3" so use something appropriate. -
How to create a table with multiple select on???
Hi all,
I am new to webdynpro and my requirement is to create a table with multiple selection on.I have to add abt 10 rows in the table but only 5 rows should be visible and moreover a verticalscroll should be available to view other rows.Can anybody explain me in detail how to do that.Please reply as if you are explaining to a newcomer.Reply ASAP as i have to do it today.
ThanxsHi,
1. Create a value node in your context name Table and set its cardinality to 0:n
2. Create 2 value attributes within the Table node name value1 and value2
3. Goto Outline view> Right click on TransparentUIContainer>Apply Template> Select Table>mark the node Table and it's attributes.
you have created a table and binded its value to context
Table UI properties
4.Set Selection Mode to Multi
5.Set Visible Row Count to 5
6.ScrollableColCount to 5
In your implemetaion, you can add values to table as follow:
IPrivate<viewname>.ITableElement ele = wdContext.nodeTable().createTableElement();
ele.setValue1(<value>);
ele.setValue2(<value>);
wdContext.nodeTable().addElement(ele);
The above code will allow you to add elements to your table node.
Regards,
Murtuza -
How to select value from list with multiple selections ?
HI,
i have a list with multiple selections where i show email address retrieved from database.
what i want to do is to send the selected email address to the invoiceedit.jsp.
please look at the following code which gives you the better idea.
<td class='smalltext'><select name="email" size="3" multiple="multiple">
<%
Connection conn = null;
Statement stmt = null;
Statement stmt_contactperson = null;
Statement stmt_address = null;
try{
conn = getREConnection();
stmt = conn.createStatement();
ResultSet rs = null;
rs = stmt.executeQuery("SELECT PROPERTYID, VALUE FROM PROPERTIES WHERE ENTITYID="+ g_strGroupID+" AND NAME = 'invoice_default_email'");
int numofrows = 0;
while(rs.next())
%>
<option value="<%= rs.getString("VALUE") %>" selected="selected"> <%= rs.getString("VALUE") %> </option>
<%
}//end of while
%>
</select>
<a href="invoiceedit.jsp?entityid=<%=g_strGroupID%>&add=1"><font color="#000000">Add</font></a>
<a href="invoiceedit.jsp?entityid=<%=g_strGroupID%>&email_to="><font color="#000000"> Edit</font></a> </td>thanksUse a form button instead of a link so that you can send it as a request parameter to the server. In the server side just use HttpServletRequest#getParameterValues() to obtain all values for the given parameter name. If you really need a link rather than a button, then use Javascript to submit the form on click of the link.
That said, your design is bad. Java code belongs in Java classes, not in JSP files. Database access logic belongs in a DAO class. Business and controlling logic belongs in a Servlet class. Only presentation logic belongs in the JSP file. Avoid scriptlets as much as possible and use JSP EL and/or JSTL instead. -
Applescript list with multiple selections
Hello guys, i have h big problem...
i was trying the multiple selections part by the command list, but if i select 2- and more it does nothing (i'm using if x is y then *linebreake* else if ...)
so i tried another way script:
tell application "Finder"
--get folders of me--
set a to get name of folders of folder "Contents:Resources:Versionen" of (path to me) --in this folder i got folders named {"0", "1", "2", "3", "4", "5", "6", "7", "8", "9"}--
set b to choose from list a with prompt "Choose your Minecraft Version!" with multiple selections allowed
--next step--
count b
set c to result
repeat c times --with this part i wanted to handle every selected folder as an individual to duplicate it somewere else
set ab to b * -1
duplicate folder ab to folder (choose folder)
end repeat
end tell
thanks for helping meThe following script (tested under OS X 10.8.2) should do what you are asking for:
tell application "Finder"
set theSourceFolder to folder "Contents:Resources:Versionen" of (path to me)
set theFolderNames to get name of folders of theSourceFolder
set theChosenNames to choose from list theFolderNames with prompt "Choose your Minecraft Version!" with multiple selections allowed
if result is false then return
set theDestinationFolder to choose folder
repeat with thisName in theChosenNames
duplicate folder thisName of theSourceFolder to theDestinationFolder with replacing
end repeat
end tell
Message was edited by: Pierre L. -
Open Transaction MM01/MM02 with multiple views using CALL TRANSACTION
Hi All,
I want to open MM01/MM02 with multiple views using call transaction but in the parameter ID for Views (MMX) I can pass status of only one View.
SET PARAMETER ID 'MAT' FIELD v_mat.
SET PARAMETER ID 'VKO' FIELD ' '.
SET PARAMETER ID 'MTA' FIELD IT_MOFF-MTART.
SET PARAMETER ID 'MTP' FIELD IT_MOFF-MBRSH.
SET PARAMETER ID 'VTW' FIELD ' '.
SET PARAMETER ID 'BWT' FIELD ' '.
SET PARAMETER ID 'LGT' FIELD ' '.
SET PARAMETER ID 'MXX' FIELD 'K'. "Sales View
SET PARAMETER ID 'MM5' FIELD ' '.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN
Please suggest.
Regards,
DivyaI do not exactly understand what you mean, but what i already did:
- I checked that the fields are from the same type.
- KUNNR is initialized! I already had a look to the debugger, that's why i'm posting this in this forum.
any more comments on this ?
maybe i have to change anything in the z-transaction. Btw, this is what the parameter looks like in the transaction:
SELECTION-SCREEN BEGIN OF BLOCK Debitoren WITH FRAME TITLE text-001.
PARAMETERS pkunnr type kna1-kunnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK Debitoren.
Edited by: Sven Delangle on Sep 3, 2010 2:42 PM -
SPEL in Extended VO - Issue with Multiple Rows
Hi,
I have extended a seeded VO by adding a new attribute *'Course_Flag'* with attribute type 'Boolean' and Query Column type 'VARCHAR2' and i wa successfully able to personalize and view the data of the new attribute *'Course_Flag'* in the page as ('true' / 'false') aacording to the query where clause.
Now after adding a new image with SPEL property as *${oa.LearnerCatalogCoursesVO.Course_Flag}* it will have an issue with multiple items.
I mean the SPEL will take the first row value 'true' / 'false' and will be corrected rendered according to the value of the first row and ignore other rows values.
Example: if the *'Course_Flag'* value of the first row is 'true' then all the images will be rendered and if the *'Course_Flag'* value of the first row is 'false' then all the images will be NOT rendered.
Please advise if I've missed any step.
Thanks in advance to all.
Regards....AshrafDear Kali,
I have added a new function to the seeded VO SQL +('XXARMS_TRG_EVALUATION_PKG.XX_COURSE_GOT_EVAL')+,
SQL Statment :-
select av.activity_version_id, avtl.version_name, av.language_id, av.start_date,
av.end_date, av.version_code, i.category_usage_id, upper(avtl.version_name) AS SORTVERSIONNAME,
XXARMS_TRG_EVALUATION_PKG.XX_COURSE_GOT_EVAL(i.category_usage_id, av.activity_version_id) Course_Flag from
ota_act_cat_inclusions i, ota_activity_versions av, ota_activity_versions_tl avtl
where i.category_usage_id = :1 and i.activity_version_id = av.activity_version_id and
nvl(av.end_date, sysdate + 1) >= trunc(sysdate) and
av.business_group_id = ota_general.get_business_group_id and av.activity_version_id = avtl.activity_version_id and
avtl.language = userenv('LANG') and
ota_learner_access_util.learner_has_access_to_course(:2,:3,avtl.activity_version_id) = 'Y'
And it is retriving the correct data for each row and i did not write any code in the RowImpl.
Thanks for your help in advance.
Regards...Ashraf -
How do i take one layer with multiple selections...
how do i take one layer with multiple selections and make those selections their own layer?
Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style. -
How can i create excel sheet with multiple tabs using utl file?
how can i create excel sheet with multiple tabs using utl file?
any one help me?Jaggy,
I gave you the most suitable answer on your own thread yesterday
Re: How to Generating Excel workbook with multiple worksheets -
Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?
okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
anyway, problem 2 and 3 are still to be solved.
and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
//e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
Last edited by deF291 (2011-04-23 16:16:31) -
We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing. Has this issue been resolved? Now that we are 2 upgrades behind, I'm getting little concerned. Thank you!
Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2. -
File to RFC with multiple records using BPM Scenario Error...!!!
Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup -
I need to repair a Macbook Pro with Disk Utility using target mode connected to my iMac. Can I use ethernet cable to connect them or must it be firewire?
Firewire
Maybe you are looking for
-
Hello Everyone, I have a G5 and after trying to upgrade my system with more memory, now it won't load the OS it stays at the gray screen with the apple the loading bar at the bottom. I also did a PRAM and VRAM reset to see if the memory would work bu
-
Profit Center is not deriving in Asset acquisation through PO & Direct Acqu
Hi I have a issue in asset accounting, kindly help me if u know.... We are using document splitting functionality with profit center mandatory for any kind of posting. Scenario-Asset purchase through PO: 1.Purchase Order -created 2.At goods receipt e
-
hi there, help please. I'm using windows 7 pro 64 bit. already updated to sp1. somehow, every time I start the computer, show an error: [Window Title] Windows host process (Rundll32) [Main Instruction] Windows host process (Rundll32) has stopped work
-
Ubuntu 14.04 taking forever to install
Hi, When installing Ubuntu 14.04 LTS on my 2013 MacBook Air, I get to the partition bit, partition and it gets stuck and has taken over 12 hours so far, with no progress. Is there anything I am doing wrong? Thanks in advance
-
OUI cannot be launched when applying patch 9.2.0.8 from CD-ROM
Hi, I need help! Could someone tell me what is wrong: When I am trying to install the patch 9.2.0.8 from CD-ROM, I get the following error Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching