Port-channel issue with FI-N7k using rate-mode share

Hi Dears,
I'm trying to using port-channel between Fabric Interconnect (FI) and N7K. in N7K use rate-mode share and LACP but the port-channel in N7K was suspended.
I was trying :
1. I using non dedicated port in Nexus 7010.
      - rate-mode share
      - channel-group 1 mode active
      - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was suspended
2. I using non dedicated port in Nexus 7010
     - rate-mode share
     - channel group 1 mode on
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was came up, but in Fabric interconnect was failed.
3. I using dedicated port in Nexus 7010
     - rate-mode share
     - channel group 1 mode active
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was suspended
4. I using dedicated port in Nexus 7010
     - rate-mode dedicated
     - channel group 1 mode active
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was came up and running well.
is any other way to configure port-channel in N7K with rate-mode share and LACP ?
or it's some of limitation in port-channel when using rate-mode share at N7K ?
nb: fabric interconnect only support LACP and cannot be configurable.
regards,
Berwin H

HI Mark,
1. Can you please check your ethernet card ...where this port channel connected..on the server.
    may be there are 2 different card.
2. from cisco websites:
Error Message
Explanation
This port has different port attributes than other ports within the port channel.
Recommended Action
Match the port attributes to that of the port channel.
Regards
Please rate if it helps.
Match the port attributes to that of the port channel.This port has different port attributes than other ports within the port channel.
EC-5-CANNOT_BUNDLE_LACP: [char] is not compatible with aggregators in
channel [dec] and cannot attach to them ([char])

Similar Messages

  • An issue with multiple selection using Func mod COMPLEX_SELECTIONS_DIALOG

    Hi All,
    I am using COMPLEX_SELECTIONS_DIALOG function module to display mutliple selection pop up for materials.
    The problem that Iam facing is that if a material  is deleted in multiple selection pop up, it is not been returned in the returning table.Only the materials avalible in the pop-up are returned in the internal table.
    Is there any way by which the deleted values could be tracked.
    Pls find below the code
    *Display the value in Multpl Selection pop up.
    CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
    EXPORTING
       TITLE                   = 'Include/Exclude Materials'
       TEXT                    = 'Pls select the materials'
       SIGNED                  = 'X'
       LOWER_CASE              = ' '
       NO_INTERVAL_CHECK      = 'X'
       JUST_DISPLAY            = ' '
      JUST_INCL               = 'X'
      EXCLUDED_OPTIONS        =
      DESCRIPTION             =
      HELP_FIELD              =
       SEARCH_HELP              = 'MAT1'
      TAB_AND_FIELD           =
      TABLES
        RANGE                   = T_MAT_INCLU_EXCLU
    EXCEPTIONS
       NO_RANGE_TAB            = 1
       CANCELLED               = 2
       INTERNAL_ERROR          = 3
       INVALID_FIELDNAME       = 4
       OTHERS                  = 5.
    Any help in this regard is highly apprecited.
    Warm regards,
    Partha.

    Applogise for posting this thread under a wrong node - ERP HCM .
    Closing the thread from this node  .
    Regards
    Sarmistha
    Edited by: sarmistha das on Mar 9, 2012 9:52 AM

  • Compatibility issue with developer 6i using (64 bit) OS

    Hi All,
    I am using oracle 9iR2 (32 bit) on Linux Red Hat (32 bit) with developer 6i. Now i want to upgrade OS Red Hat (64 bit) and migrate database 10gR2 (64 bit).Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
    Thanks

    Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
    No, as long as developer 6i is at least patch 16. We use it.

  • I need to repair a Macbook Pro with disk utility using target mode to another my iMac. Can I use ethernet cable or must it be firewire?

    I need to repair a Macbook Pro with Disk Utility using target mode connected to my iMac. Can I use ethernet cable to connect them or must it be firewire?

    Firewire

  • Port-channel issue over Ciena DWDM

    Hi all, 
    I'm currently working on an issue encountered on a DC. 
    We currently use 2 3750 stacks (1 in each DC), connected with a Po. 
    We use dark fiber between each DC, so we have a Ciena DWDM transponder on each side. 
    The problem is that, if we have an issue on the inter-DC fiber, the Ciena interface on the 3750 side is still up. Using LACP on the Po, the issue can be detected in about 3 X 30 sec = 90 sec. 
    Before the issue is detected by LACP, the impacted port-channel interface is still used by the Po, which can cause big issues. 
    I thought use an EEM applet in order to monitor the CDP neighbor on each interface, and exclude the interface from the Po till the CDP neighbor is down, but the CDP timers are even bigger (180 sec hold-time). 
    Is there any way to address this problem, other than UDLD ? 
    In our others DC, we have two NX7K on each side, and we are able to use LACP with fast-rate, but this is not available on 3750... 
    Thank you very much ! 

    the best way to use pair of transponders on each side in protection group.

  • Port-Channel Issue: SP-5-CANNOT_BUNDLE_LACP

    I'm having an issue with the port-channel coming up. Right now it's "down down". I'm not really sure why. All other port-channels on the 6500's in VSS work fine. This one seems to be giving me an issue though.
    -Both interfaces that are using this port-channel are "up up".
    -I've done "shut's, no shut's" on all interfaces involved.
    sh etherchannel summary
    Flags:  D - down        P - bundled in port-channel
            I - stand-alone s - suspended
            H - Hot-standby (LACP only)
            R - Layer3      S - Layer2
            U - in use      N - not in use, no aggregation
            f - failed to allocate aggregator
            M - not in use, no aggregation due to minimum links not met
            m - not in use, port not aggregated due to minimum links not met
            u - unsuitable for bundling
            d - default port
    Po4(SD)         LACP      Gi1/1/4(I)     Gi2/1/4(I)  
    interface Port-channel4
    switchport
    switchport access vlan (vlan number)
    switchport mode access
    load-interval 30
    flowcontrol receive desired
    spanning-tree portfast edge
    end
    interface GigabitEthernet1/1/4
    switchport
    switchport access vlan   (vlan number)
    switchport mode access
    load-interval 30
    flowcontrol receive desired
    spanning-tree portfast edge
    channel-protocol lacp
    channel-group 4 mode active
    end
    interface GigabitEthernet2/1/4
    switchport
    switchport access vlan  (vlan number)
    switchport mode access
    load-interval 30
    flowcontrol receive desired
    spanning-tree portfast edge
    channel-protocol lacp
    channel-group 4 mode active
    end
    sh log
    149886: Jul  3 15:20:34 CDT: %EC-SW1_SP-5-CANNOT_BUNDLE_LACP: Gi2/1/4 is not compatible with aggregators in channel 4 and cannot attach to them (flow control receive of Gi2/1/4 is desired, Gi1/1/4 is on)
    149887: Jul  3 15:20:35 CDT: %EC-SW2_SPSTBY-5-CANNOT_BUNDLE_LACP: Gi2/1/4 is not compatible with aggregators in channel 4 and cannot attach to them (flow control receive of Gi2/1/4 is desired, Gi1/1/4 is on)
    Thank you for your help.

    HI Mark,
    1. Can you please check your ethernet card ...where this port channel connected..on the server.
        may be there are 2 different card.
    2. from cisco websites:
    Error Message
    Explanation
    This port has different port attributes than other ports within the port channel.
    Recommended Action
    Match the port attributes to that of the port channel.
    Regards
    Please rate if it helps.
    Match the port attributes to that of the port channel.This port has different port attributes than other ports within the port channel.
    EC-5-CANNOT_BUNDLE_LACP: [char] is not compatible with aggregators in
    channel [dec] and cannot attach to them ([char])

  • Issue with WRVS4400N v2 bandwith rate control (firmware 2.0.1.3)

    I have an issue with the QOS setting / bandwith rate control.
    I've tested it with a new factory config.
    Setup : limit my IP (all ports) to max rate at 512 Kbit/sec (min rate to 1 Kbit/sec) in downstream and enable checked.
    When I test my speed, there is no limit.
    If it try the exact setup with a RVS4400 (without wireless) it works fine!!!
    Does anyone have this issue or know how to solve it???
    Thanks in advance
    Al
    Here is my setup... (and yes when I made sure I'm using 192.168.1.101 while doing the test...)

    I have upgraded to the latest firmware V 2.0.2.1 with no difference.
    The Rate control function is not working at all.
    Cicso doesnt appear to want to fix it.

  • Port channel issue in ASA

    We have two Cisco ASA 55XX Firewalls and both are in HA (Active/Standy). Two ports from each Firewall is connecting two ports of Nexus 5K Switch and running port channel between Firewall & Nexus Switch and port-channel is UP. And Switches having back to back connection with allowed all VLAN trunk port.
    FW01 ----------------- SW01 (Two ports with Port channel)
    FW02 ----------------- SW02 (Two ports with Port channel)
    I have VLAN 10 with IP Subnet 10.10.10.0/28
    SW01 : 10.10.10.2
    SW02 : 10.10.10.3
    HSRP IP : 10.10.10.1
    FWs :  10.10.10.4 & 10.10.10.5
    Firewall Default Gateway : 10.10.10.1
    Problem : I am not able Ping Firewall IPs from Nexus Switches. When I checked ARP table in Nexus Switch; I have observed that Firealls two IPs having same MAC address; when I checked that MAC address in the Firewall; that MAC address is Port channel interface MAC address.
    This is issue (two IPs learing same MAC address) from ASA.
    How to fix this issue ?
    Thanks
    Venkat

    Hi,
    What version of IOS are you running on the ASAs?
    see table-12-3 in this link:
    http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/interface_start.html
    Also, since the 4500x are in VSS mode, you need to bundle one link from each switch and use LACP.
    HTH

  • Issue with indirect Quotation Exchange rates...

    Hi All,
    I am using FM 'POSTING_INTERFACE_CLEARING'  to clear the customer open items.
    While  posting with indirect quotation exchange rates i.e BKPF-KURSF is in negative.It is throwing below error
    "The Exchange rate may not be transferred if negative".
    When i check it in BKPF table the value is saved like exp: '/1.9010'.  for select query it is picking like '1.9010-'
    How to resolve this issue.? it is very urgent.
    Thanks in Adv.
    Regards,
    Raj.

    Hi,
    I gave the OB08 entries, not sure if you wanted me to explain the logic. Here it is..
    Maintain 'Indirect quotation' from Local currency(USD) to Transaction currency(CAD) and 'Direct quotation' from Transaction currency(CAD) to Local currency(USD).
    Direct quotation is where the cost of one unit of foreign currency is given in units of local currency, whereas indirect quotation is where the cost of one unit of local currency is given in units of foreign currency.
    Your local currency is USD:
    - Direct exchange rate: 1CAD = 0.92819 USD
    - Indirect exchange rate: 1USD = 1.08238 CAD
    The following settings have been made in the standard system:
      - Direct quotation: ' '
    -   Indirect quotation: ' / '
    Direct exchange rates do not have a prefix.
    Your local currency is USD. You enter a business transaction in the transaction currency CAD. Until now, you had to use direct quotation to enter the exchange rate (1CAD =0.92819 USD). If you have defined '/' as the prefix for indirect quotation, you can also enter the exchange rate with indirect quotation (1 USD = 1.08238 CAD) by entering '/1.08238' in the exchange rate field.
    Direct or indirect quotation can be maintained as the standard form of quotation for a certain currency pair. You use:
             - '1' for direct quotation
             - '2' for indirect quotation
    If a standard form of quotation has not been specified for a currency pair, the system automatically uses direct quotation.
    You make the settings in the IMG: General Settings -- Currencies -- Set Standard for Direct/Indirect Quotation per Currency Pair.
    Thanks
    Ganesh

  • Anyone else having an issue with TCP connections using iCloud for Windows?

    Hi,
    Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
    On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
    It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
    I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
    So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that.  They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
    Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
    My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b,  at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
    The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
    Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
    Anyone out there have any ideas or advice about this? Thanks in advance.

    Thanks jared,
    I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
    So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
    Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
    For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

  • Port Forwarding Issues with Westell a 7500

    I'm having troubles getting port forwarding to work on my Westell 7500 router.  I have used the instructions provided at http://www22.verizon.com/ResidentialHelp/HighSpeed​/Networking/Troubleshooting/PortForwarding/123866.​...
    Having set up my own port forward I had my aplication test the port and I was told it was closed.  Then I went to a third party web based port testing site (http://www.canyouseeme.org/) to confirm that the port was indeed closed and not just a problem with my aplication.  The site told me that the port was closed.
    So I decided to try one of the pre-created port forwards included with the modem.  Using the port number provided I changed the port my aplication used and it still self-tested as closed.  I then went back to canyouseeme and it too told me that the port was closed.
    I should also note that in the "Port Forwarding" screen on the router the delete icon (I'm assuming that is what it is - the icon has a red X through it) does not respond to being clicked on.  When I hover the mouse over the icon I get the following text overlay in the bottom left corner of the Chrome browser window - javascript:deleteEntryStart(5,document.Table​Mgr,0);
    To sum up, neither a personal nor a pre-fab port forward show in tests to be working and a function also appears to be not working.
    Here's the rub - I am told by tech support that this is an L3 issue.  L3 issues are not covered under regular tech support and are very expensive buy.  My gut feeling is that the router is defective, but I need some way to confirm this before I start making a stink with customer service.  I don't want to spend $39.00 to be told my router is broken before I can send it in and I have a feeling that customer service is going to want to have solid evidence that the problem is not pilot error before ponying up for a replacement modem.
    Does anyone have any suggestions for testing the router more thouroughly?  Is this a known issue?  Or does anyone have any suggestions about programming the port forward?
    Thank you in advance for taking the time to address this!
    Solved!
    Go to Solution.

    If I am not mistaken, the firewall in the router must be at least low.
    Otherwise, it will ignore all rules  (or something along that line).
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Port Channel Issue on Cisco 2960s-24ts

    Hi All
    Last week at a customer site we installed a 2nd 2960s 24 port switch to form a stack using flexstack cables, and the switch stack is working as expected as I can see a master switch and 2nd switch as a member.
    For redundancy / resilience we decided to use port 24 on each switch over copper for trunk uplinks to our core switch. The issue that we're having is I can't ping the switch management address. I can however see the address in the arp table and the edge switch is visible when I run show cdp nei. As a work around I've shutdown one of the ports to the downlink from core to edge in order to ping the management address of the switch which is in vlan 1. I'd like to get the port-channel working on both sides for resilience.
    ANY HELP IS APPRECIATED...
    Core switch is a WS-C3750G-24TS-1U running software version  C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEE4, C3750 Software (C3750-IPBASE-M)
    Edge switch is a WS-C2960S-24TS-L running software version C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(53r)SE,C2960S Software (C2960S-UNIVERSALK9-M)
    The config on the edge switch which goes to the core is :
    interface GigabitEthernet1/0/24
     description *****
     switchport mode trunk
     channel-group 6 mode on
    end
    interface GigabitEthernet2/0/24
     description *****
     switchport mode trunk
     channel-group 6 mode on
    end
    interface Port-channel6
     description ******
     switchport mode trunk
    end
    The config on the downlink ports from the core to the edge:
    interface GigabitEthernet1/0/20
     description Edge
     switchport trunk encapsulation dot1q
     switchport mode trunk
     channel-group 20 mode on
    end
    interface GigabitEthernet2/0/20
     description Edge
     switchport trunk encapsulation dot1q
     switchport mode trunk
     shutdown
     channel-group 20 mode on
    end
    interface Port-channel20
     description Edge
     switchport trunk encapsulation dot1q
     switchport mode trunk
    end

    when using channel-group # on mode you must make sure the ports are on same duplex and speed setting
    what happens when you use active mode?

  • Port channel configuration with VMware

    Hi everyone, I have dual 6120 interconnects, each of which have two uplink ports. I also have two Catalyst 4900M switches to uplink to. So I plan to configure both 802.1q and 802.3ad on each of the 6120 uplink pairs. My question relates to the physical cabling, bearing in mind ESX will be running on the blades.
    Would you cable both the uplink ports on interconnect 1 to switch 1? Or would you cross-connect them to both switch 1 and switch 2?
    As per this article I see ESX does not support splitting a port channel across two switches, but I am unsure how the presence of the 6120s affects this. Can anyone suggest the best way of doing the cabling based on the kit I have? Thanks.
    http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1001938&sliceId=1&docTypeID=DT_KB_1_1&dialogID=14912551&stateId=1%200%2014916516

    Hey Simon, let's address this is two parts because there are two layers: server-bound (ESX-6120) and north-bound (6120-Cat4900).
    At the ESX end, use the default srcPort in the vSwitch / port group with both 10GbE uplink ports (vmnic0 and vmnic1) set to active (not active/passive).  There are no loops in this configuration.  On the VNIC (in UCSM) you select trunk port and allow all the VLANs that your vSwitch port groups needs.  If you don't use a VLAN for the Service Console/ESXi Management, then make sure you set Native to the correct VLAN in the VNIC to allow untagged traffic down the right path.
    At the 6120 you can't explicitly configure a trunk for border ports, they are already set so and when you add VLANs they are added to every border port trunk configuration.  You, of course, need to make sure the Cat4900 ports at the other end of the cable have the same trunkport VLAN configuration.
    So in summary - set VLANs in vSwitch port groups, VNIC in UCSM and northbound switch. 
    Now when it comes to port channels, you can only configure two or more border ports as a port channel if they are cabled to the same Cat4900.  If you had Nexus 5k/7k northbound then you could use vPC on them to allow "mesh" cabling (ie. one 6120 connects to both Nexus switches).  But as you aren't using Nexus you will end up with a configuration as Jeremy explained:
    ESX --> vSwitch0 --> srcPort load balancing --> 2 active uplinks --> many port groups
    6120-a --> Cat4900-a
    6120-b --> Cat4900-b
    However, I would still recommend using a couple of border ports in a port channel on each fabric to each Cat4900 because, if you pull out a cable/lose a port, then when that port is re-enabled the existing live traffic is redistributed whereas without the port channel only new traffic will be spread across both links.
    Cheers
    Steve
    Cisco UCS Team

  • Port-channel problem with WiSM

    Has anybody met following similar problem:
    I put WiSM into slot 3(also tried slot 6) of 6506(sup720-3B, s72033-adventerprisek9_wan-mz.122-33.SXH.bin), using following command to setup the port-channel:
    interface Port-channel1
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 5
    switchport trunk allowed vlan 1-1000
    switchport mode trunk
    int range g3/1-4
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 5
    switchport trunk allowed vlan 1-1000
    switchport mode trunk
    channel-group 1 mode on
    I can use "session slot 3 pro 1" to login to the WiSM, but can't ping WiSM's management IP address from 6506, then I find the port-channel has problem, only G3/1 is up and included in the channel, G3/2-4 are up but line protocol is down, then I found from the log that: "AESUT: %EC-SP-5-CANNOT_BUNDLE2: Gi3/2 is not compatible with Gi3/1 and will be suspended (qos-card type unavailable for Gi3/2 or Gi3/1)". It says those GE port are not compatible for qos-card type, but I checked the configuration, all GE using the same configuration. Don't know why, maybe a bug? Appreciate for any feedback

    I have the same problem, but it has something to do with QoS. When you disable "mls qos" on the switch, the port-channel will function normal again.
    It doesn't help when you configure "mls qos trust dscp" on the port-channel!!!!!

  • Port Channel 5548 with 6509

    My company just purchased a Nexus 5548.  I've been fooling around with the configurations and just getting familiar with this equipment.  I've already configured a port channel using 2 10gig ports on our 3850 and its working fine.
    Now, I'm trying to configure a second port channel with our 6509 1gig ports. Ports comes up. But I cannot communicate between these 2 devices.
    Show CDP Neigh shows the other devices. Show Etherchannel summary is blank
    This is the config on the 6509
    interface Port-channel22
     switchport
     switchport trunk encapsulation dot1q
     switchport mode trunk
    interface GigabitEthernet9/7
      switchport
     switchport trunk encapsulation dot1q
     switchport mode trunk
     channel-group 22 mode on (I also tried using Active and desirable)
    Config on 5548
    Inteface Port-Channel 2
    switchport
     switchport mode trunk
     speed 1000
    interface ethernet1/32
     switchport mode trunk
     speed 1000
     channel-group 22 mode on
    I also have feature Lacp , interface vlan and vlan dot1q tag native enabled
    Any ideas why I cannot communicate between these devices? 

    This is what is showing on the 5548
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-SPEED: Interface Ethernet1/32, operat
    ional speed changed to 1 Gbps
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/32, op
    erational duplex mode changed to Full
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Etherne
    t1/32, operational Receive Flow Control state changed to off
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Etherne
    t1/32, operational Transmit Flow Control state changed to off
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-SPEED: Interface port-channel2, opera
    tional speed changed to 1 Gbps
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-IF_DUPLEX: Interface port-channel2, o
    perational duplex mode changed to Full
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface port-ch
    annel2, operational Receive Flow Control state changed to off
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface port-ch
    annel2, operational Transmit Flow Control state changed to off
    2015 Mar 18 08:18:09 DC-5548-01 %ETH_PORT_CHANNEL-5-PORT_UP: port-channel2: Ethe
    rnet1/32 is up
    2015 Mar 18 08:18:09 DC-5548-01 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel2:
    first operational port changed from none to Ethernet1/32
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-IF_UP: Interface Ethernet1/32 is up i
    n mode trunk
    2015 Mar 18 08:18:09 DC-5548-01 %ETHPORT-5-IF_UP: Interface port-channel2 is up
    in mode trunk
    My 6509 does not show anything. Now when I do  a show etherchannel summary on the 6509, the protocol is lacp.

Maybe you are looking for