Analysis Report for generic articles based on different characteristics

Dear all ,
We are running SAP Retail solution ,and we use generic articles for the management of cloth and shoes articles.
So far ,we didn't find any standard t-code in sap GUI for the slaes analysis of generic articles base on their characteristics ,for example ,we use color and size to form the characteristic profile and assign it to some generic articles ,after a period of sales ,we want to analysis which size is more favarable as to the same color or to the contrary.
Except for BW , Is there some info-structure or t-code in GUI for this analysis ?

Hai deyi chen,
If you know the table were data stored.
Create your own report formats using SQVI
T CODE SQVI
Table Join
Add Tables and system will show the join automatic in case if u know u can also change.
Now You select which fields to be in the selection screen and select fields to be listed inside the report.
Regards,
Mani

Similar Messages

No data in Application failure Analysis report for a particular application alone.

Dear All,
We are not able to get the data in Application Failure Analysis report from Appadvisor for a particular application(say ABC) alone, whereas it works fine for different application. Also,we could get the data from other reports(such
as Application status,Problem distribution analysis,etc) for the same application(ABC). PFB snapshot for your reference.
Thanks in Advance.
Regards,
Rajesh Kumar C

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Create Pricing Profile for Generic Articles

Hi
How to create pricing profile for generic articles, this need to be assign in article master basic data view.
also is it possible to give price for generic article using sales price calculation (VKP1 and VKP5)
regards
satish

satish c wrote:>
> Hi
>
> How to create pricing profile for generic articles, this need to be assign in article master basic data view.
Pricing Profile can not be created, It is default in SAP...this can be assigned in Basic view of Article master data
This profile is useful for fixing price for variant article...three way you can define variant price
If you select
                0. Variants will have different price
     1. Variants can maintain different price
     2. Variants have same price as Generic material
> also is it possible to give price for generic article using sales price calculation (VKP1 and VKP5)
It is same like single article...you can maintain price in VKP1, VKP5
Regards
Vijai Jain

Cost Analysis Report - For a range of process orders

Dear all,
Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
Thanks
Nagarajan

Dear
You can use cost analysis report like
1.S_ALR_87099932 - Variances Between Costing Runs
2.S_ALR_87099931 - Price vs Cost Estimate
3.S_ALR_87099932 - Variances Between Costing Runs
5.KOC4
Regards
JH

Analysis report for standard cost in CK33N

Hi,
Analysis report for standard cost
Using variant Z003 in CK11N.
Planned cost 3 is the output used for planning and this is adjusted by making changes to the BOM throughout the process
In CK33 you compare the 2011 cost for the product with the proposed cost for the next year. For some parts it works and for others it splits the lines, though the calculation is still correct.
Regards,
T.Harish Kumar

Hi Revital,
I believe the last option is correct.
Thanks,
Gordon

Free Goods Promotion for Generic Article

Hi
In IS-Retail can we create free good prmotion for generic article & it will automatically be applicable for varients of that generic article. or we need to create on individual varient free good condition record
Pl advise
Regards
Sandip

Hi selva
1)Check in Change Promotion T.code - WAK2
in the item level Promotion announcement category(Ann column) - set indicator as F Promotion announcement
2)Check sales periods dates - Sales order from to TO it should be valid date
if not works, reply me i will give some more solutions
regards
Satish

Age Analysis report for asset

Hi All,
I have to create a Age analysis report for FI documents
which have line items with posting key 75 & 70 (Asset)
Given logic is
1 Selection screen has parameters - Company code, Key date
2 Need to take all line items with posting key 70 & 75
(BSEG-BSCHL = 70 or 75)
Layout of report is
Asset no       0-30 31-60      61-90      91-120 . 151-360 (days)
80000003     2000.00    3000.00    1000.00   4000.00    7000.0
80000006     1000.00    5000.00     300.00    5000.00    4000.0
Local curency amount should be categorised under the days
diferences between key date (selection screen) & posting date
of the accounting document.
My problem is,
Posting date of the document is not in the BSEG table. It is
in the BKPF table.Therefore I have to extract all FI documents(Not only documents with posting key 75 or 70) within 360 days from Key date in BKPF the table.
I cannot join BSEG & BKPF. Because, BSEG table is a cluster table.
Can you please tell me the way how can i extract the data for this report with out any performance issues.
Pra

Great idea, but I dont think it is going to work.
The 1st problem should be, how do you work out the key date... You will need some good code for that.
Have a look at the customer aged debt reports for some help.
After that, if you just want asset documents, do they have their own unique document type, if so, you could use the doc type from BKPF to reduce the number you want to select in BSEG.
Have you looked at any of the standard Asset dep reports, perhaps there is something there you could use.

Aging Analysis Reports for Inventories & Receivables

Hello,
Can any one answer me how to get aging analysis reports for inventories & receivables in SAp R3 system?
Thanking You,
Regards
Santosh Rothe

hi
the age analysis report format should be like
Material list   | 0 - 3 months | 3 - 6 Months | 6 - 12 months | above 1 year|
M1                10                  50                    0                       0               pc
M2                0                   0                      12                    10               Kg
etc .
Pls suggest the suitable T.code or step for configuring to get in the above report format
Regards
Santosh Rothe

Merchandise Category creation for Generic Article in SAP IS-Retail

Hi,
Can anyone help me out to with clear and complete process and settings i have to maintain for merchandise category for generic article for shoes of our client. I created merchandise category with the below transaction codes
ct04,clwe,clwe,clw1 and wg21 but when i used to create generic article i have to find characteristics in variants tab in basic data view in mm41 but i didn't find it.
HELP ME with SCREENSHOTS which will HELP ME in FUTURE of our CLIENT
Thanks & Regards
Gopi Krishna
Mobile:+91 9741042296

Hi Manish,
Thank you for your reply which is the procedure for relevance of variants in creation of generic article.My concern is to know complete merchandise category creation with screenshots which i can create by own merchandise category.
Thanks & Regards
Gopi Krishna Potteti

Stock report for a period (based on posting date)

Hi Experts,
We have a requirement as under:
1) We want a report for a period say from 01.04.2011 to 30.09.2011 (closed period for both MM and FI postings). Report is being taken on a later date say 01.12.2011.
2) The report should say the status of stock as of 30.09.2011 only even of being taken in the month of December
3) I tried to take the desired report through MB5B for the period 30.09.2011 to 30.09.2011 (selection date fields) on 20th december, 2011 and noticed that if same report with the same selection criteria is taken at two different times, output data is not the same whereas MM and FI posting periods are already closed.
Can anybody suggest alternative SAP standard report where output will remain the same if report with same selection criteria is taken at different intervals ELSE in case of change we should be able to see the documents posted in between if back dated entries have been posted after opening MM /FI period.
thanks

sure it speaks the same, but it mentions as well the reasons (1) and has much more information (2) and a solution.(3)
1)
user starts transaction MB5B for a very large number of materials or for all materials in a plant
During the runtime of transaction MB5B, goods movements are posted in parallel:
- The results of transaction MB5B are incorrect.
- Each run of transaction MB5B returns different results for the same combination of "material + plant".
Example: Transaction MB5B should process 100 materials with 10,000 MM documents each. The system takes approximately 1 second to read the material master data and it takes approximately 1 hour to read the MM and FI documents. A goods movement for a material to be processed is posted approximately 10 minutes after you start transaction MB5B. The stock for this material before this posting has already been determined. The new MM document is also read, however. The stock read before the posting is used as the basis for calculating the stocks for the start and end date.
Even for an old and closed period, MB5B starts today and calculates backwards any movement to finally get the stock for the time your specified in your selection.
2)
The SAP standard release does not include a solution
so you have to understand that there is no real alternative transaction in SAP
3) and then they provide a large section with a workaround that can be developed by an experienced programmer within 3 to 5 days.
So how shall anyone here be able to tell you an alternative report?
if someone does, then it is an owndeveloped z-report which is not available in your sap system.
if you know that people want lookup period closing stocks at any time in future, then either schedule MB52 at month end and store the list somewhere (and do not allow backposting)
or have an Abaper create a stock report based on the history tables MARDH, MCHBH, MBEWH etc.
And even here you may encounter an issue at some day, if you start archving special stocks or material masters, because then the stock figures from the historic tables are gone and you cannot rebuilt a reliable stock report .

Aging Analysis report for open Items in SD

Hi ,
Please give the code snippet for the following case.
aging analysis program for open items:-
payments not receivecd for 15 days,30 ,60 ,90days
imput:
custno range
sales area
days 30,60,90 selection sort by cust no,sales organization
output :report program ALV grid format
Many Thanks in Advance.
Raj

There are couple of Standard Report for Customer Open Items.
RFDOPO00 - List of Customer Open Items.
RFDSLD00 - Cutomer Balances
Also there is another standard report....
Run the Tcode 'S_ALR_87012178", that is "Customer open Item analysis by Balance of Over dues".
Copy the Report and make necessary changes.
Modification is always required to get a "good looking" aging report, there is no standard.
Hope this helps.
Vinodh Balakrishnan

Urgent issue REPORT FOR ALL MATERIAL BASED ON STOC TYPE

Hi
I want report for based on stock type
i want to check the stock for all mterial with stock type "quality inspction"
i want that type of material documents
is it possible to see the report
regards sesidhar

I CREATE material A...with out seleting QM view
I create one more material B.... with select QM view
both r ROH material type..
when i caeate GR for material A. with stoc type 'QYALITY INSPECTION.. for this material system does not creat quality LOT....
when i create GR for material B with stock type 'QYALITY INSPECTION.... for this material system created lot..
but are GR done by 101 movement..
but i want report for materials which are stock type QI...but does not display Material which r lot created...?
is it possible..
regards
sesidhar

BAPI_MATERIAL_MAINTAINDATA_RT update gross weight for generic article

Hi, I want to update the gross weight (MARM-BRGEW) for a generic article and it's variants. Sometimes, the new gross weight is not propagate to all the article related variants when I'm using BAPI BAPI_MATERIAL_MAINTAINDATA_RT ??
In the structure headdata, I just pass the article number and flag the basic_view. I used 2 internal table for the unit of measures (bapie1marmrt, bapie1marmrtx).
Example of my source code:
st_headdata-material   = st_marm-matnr.
st_headdata-matl_cat   = st_marm-attyp. (01 for generic)
st_headdata-ref_matl   = st_marm-matnr.
st_headdata-basic_view = 'X'.
st_bapimarm-material   = st_marm-matnr.
st_bapimarm-alt_unit   = st_marm-meinh.
st_bapimarm-numerator = st_marm-umrez.
st_bapimarm-denominatr = st_marm-umren.
st_bapimarm-gross_wt   = pa_brgew.
st_bapimarm-unit_of_wt = st_marm-gewei.
st_bapimarmx-material   = st_marm-matnr.
st_bapimarmx-alt_unit   = st_marm-meinh.
st_bapimarmx-numerator = 'X'.
st_bapimarmx-denominatr = 'X'.
st_bapimarmx-gross_wt   = 'X'.
st_bapimarmx-unit_of_wt = 'X'.
APPEND: st_bapimarm   TO tp_bapimarm,
          st_bapimarmx TO tp_bapimarmx.
CALL FUNCTION 'BAPI_MATERIAL_MAINTAINDATA_RT'
    EXPORTING
      headdata        = st_headdata
    IMPORTING
      return          = st_return
    TABLES
      unitsofmeasure = tp_bapimarm
      unitsofmeasurex = tp_bapimarmx.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Let's say my article has 3 unit of mesasure which are EA, PAK, CAR. The base unit of measure of the articles (generic + variants) are EA.
MARM example BEFORE calling the bapi
MATNR           MEINH   UMREZ   UMREN BRGEW
A011125             KAR     48     1      33
A011125A10090     KAR     48     1      33
A011125A10091     KAR     48     1      33
A011125A10092     KAR     48     1      33
A011125A10093     KAR     48     1      33
A011125B10590     KAR     48     1      33
A011125B10591     KAR     48     1      33
A011125B10592     KAR     48     1      33
A011125B10593     KAR     48     1      33
A011125W10090     KAR     48     1      33
A011125W10091     KAR     48     1      33
A011125W10092     KAR     48     1      33
A011125W10093     KAR     48     1      33
MARM after calling the BAPI with a new BRGEW of 34
MATNR           MEINH   UMREZ   UMREN BRGEW
A011125             KAR     48     1      34
A011125A10090     KAR     48     1      34
A011125A10091     KAR     48     1      34
A011125A10092     KAR     48     1      34
A011125A10093     KAR     48     1      33
A011125B10590     KAR     48     1      34
A011125B10591     KAR     48     1      33
A011125B10592     KAR     48     1      33
A011125B10593     KAR     48     1      34
A011125W10090     KAR     48     1      34
A011125W10091     KAR     48     1      33
A011125W10092     KAR     48     1      34
A011125W10093     KAR     48     1      34
I don't think that a locking problem....

Please open a customer message with the detail data, so I will have a look at your system.
But I remember that there should be a note for that
Regards
B

System is not allowing GR through MIGO for generic article in SAP Is-Retail

Hi,
I am trying to do a GR into DC through MIGO for a generic article and its variants but system is not allowing it saying " The generic article is not maintained in DC". System by design doesn't allow to maintain generic article for specific site but it does for reference site. It did not say anything at the time of PO creation but throwing error during GR. Looking for help!
Thanks in advance!
Subhankar

awaiting response.

Account Analysis Report for GL

Hi all
i want to add new column to this report but executable file type is java concurrent program. can any one help me in getting this solution...

Is it related XLA? Short Code is XLAAARPT?
This CP is XML Pubsliher Implemented.
Check whether your column / information is already available in output xml (Diagnostics button -> View XML).
If yes, change the rtf to include your column also.
If not, you need to copy the Data Definition and rtf and do the required changes and even the concurrent program and have custom report for Account Analysis.
By
Vamsi

Analysis Report for generic articles based on different characteristics

Similar Messages

Maybe you are looking for