Analyze tables using procedure .
Hello Friends,
I my schema , I had to analyze all the tables ( gather statistics ) before I start the loading process to target tables.
I have created a procedure -
create or replace procedure proc_analyze_tables as
table_count number :=0;
sqlstatement varchar2(4000);
begin
for i in ( select TNAME from TAB where TABTYPE='TABLE' AND TNAME ='ABC') loop
sqlstatement := 'ANALYZE TABLE ' || i.TNAME || 'ESTIMATE STATISTICS ';
EXECUTE IMMEDIATE sqlstatement ;
dbms_output.put_line ( 'table name is ' || i.TNAME );
end loop;
end proc_analyze_tables;
is it appropiate to use the folllowing statment.
exec dbms_stats.gather_schema_stats(ownname=>'myschema_name', options=>'GATHER AUTO');
When I execute the procedure , I am getting invalid analyze command .
How I can use the procedure or is their any command that can be executed by execute immediate statement !!
thanks/kumar
kumar73 wrote:
Hello Friends,
I my schema , I had to analyze all the tables ( gather statistics ) before I start the loading process to target tables.
I have created a procedure -
create or replace procedure proc_analyze_tables as
table_count number :=0;
sqlstatement varchar2(4000);
begin
for i in ( select TNAME from TAB where TABTYPE='TABLE' AND TNAME ='ABC') loop
sqlstatement := 'ANALYZE TABLE ' || i.TNAME || 'ESTIMATE STATISTICS ';
EXECUTE IMMEDIATE sqlstatement ;
dbms_output.put_line ( 'table name is ' || i.TNAME );
end loop;
end proc_analyze_tables;
When I execute the procedure , I am getting invalid analyze command .
How I can use the procedure or is their any command that can be executed by execute immediate statement !!
thanks/kumarANALYZE TABLE is obsoleted & deprecated.
use DBMS_STATS instead
The standard advice when (ab)using EXECUTE IMMEDIATE is to compose the SQL statement in a single VARCHAR2 variable
Then print the variable before passing it to EXECUTE IMMEDIATE.
COPY the statement & PASTE into sqlplus to validate its correctness.
Similar Messages
-
How to update the data in sqlserver table using procedure in biztalkserver
Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database -
Operates on two table using procedure
i want to handle two table using procedure in oracle 10g. i have created a procedure like this
CREATE OR REPLACE PROCEDURE sold_car1(
sid soldcar.sold_id%TYPE,
cid soldcar.id%TYPE,
cuid soldcar.customer_id%TYPE,
eid soldcar.emp_id%TYPE,
d soldcar.dat%TYPE
) IS
BEGIN
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd'));
DELETE FROM pcar where id=cid;*
COMMIT;
END sold_car1;
SHOW ERRORS
i have found some errors. how can i do this.hi
the errors are something like this ''the procedure is created with some errors''.
actually i want to pass 4 parameters in the procedure that will insert in one table and among the 4 parameters by using one parameter i want to delete one row of another table.
INSERT INTO soldcar VALUES(sid,cid,cuid,eid,to_date(d,'yyyy/mm/dd')); //soldcar is first table
DELETE * FROM pcar where id=cid; //pcar is second table -
How to create table using Procedure
Hi,
I want to create table using procedure .
How to write procedure for the table creation?
thanks in advance.Use dynamic sql or DBMS_UTILITY.EXEC_DDL_STATEMENT:
SQL> desc tbl1
ERROR:
ORA-04043: object tbl1 does not exist
SQL> begin
2 execute immediate 'create table tbl1(x number)';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> desc tbl1
Name Null? Type
X NUMBER
SQL> drop table tbl1
2 /
Table dropped.
SQL> begin
2 DBMS_UTILITY.EXEC_DDL_STATEMENT('create table tbl1(x number)');
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> desc tbl1
Name Null? Type
X NUMBER
SQL> SY. -
How to update multiple records in a table using procedure?
Dear All,
1 am using 11.1.2.1.0
my question is i have a table like
emp id(primary key), empname,location
1 damby blore
2 rocky kormangala
3 biswa india
my question is i need to write one procure that at a time i can update empname and location(wat the value are there in empname and location i need to change at a time).
thanks
DambyHi, Damby,
That sounds like what the UPDATE statement does, exactly. Just use an UPDATE statement to change any number of columns in existing rows. You don't need a procedure, but, if you're using a procedure for some other reason, you can do the UPDATE in the procedure. UPDATE works the same in SQL or PL/SQL.
Sometimes MERGE is more convenient than UPDATE. Like UPDATE, it can change any number of columns, either in SQL or PL/SQL.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
In the case of a DML operation (such as UPDATE) the sample data should show what the tables are like before the DML, and the results will be the contents of the changed table(s) after the DML.
Explain, using specific examples, how you get those results from that data.
See the forum FAQ: https://forums.oracle.com/message/9362002 -
Inserting a Flag value in to a table using Procedure
Hi All-
we are trying to write a procedure which can refresh Materialized views in the database and upon success full refresh it should insert a flag value say 'Y' or 'N' into a table can you guys give me your thoughts.Earlier, you said
while i am trying to execute that one it is giving me an error.Multiple people have asked you to tell us what error you received. It is very difficult for us to guess the error that you're receiving and to then guess the solution. Perhaps you don't have permission to the DBMS_SNAPSHOT package, perhaps you mis-spelled the name of the materialized view, perhaps you don't own the materialized view, etc. If you tell us the error you're getting, it's far more likely that we're going to be able to help.
Other than the fact that you're using the DBMS_SNAPSHOT package rather than the DBMS_MVIEW package, which I haven't seen done since the 8i days, I don't see anything obviously wrong with your implementation. As has been pointed out, the design is problematic-- it makes little sense to record in your own table less information than Oracle will record automatically in the data dictionary and to spend time writing additional code to do that lesser level of logging.
Justin -
I am unable to create a table using procedure..
Hi everyone,
I have given CREATE ANY TABLE privilege to user A and wants to insert data into TAB1 in schema B using a procedure "INSERT INTO B.TAB1 AS SELECT * FROM A.TAB1" but it shows the message--
PL/SQL: ORA-01031: insufficient privileges
Which privilege user A need to do the above task.
Thanks,
AbhijeetSQL> create user a identified by a;
SQL>create user b identified by b;
SQL> grant connect,resource to a;
Grant succeeded.
SQL> grant connect,resource to b;
Grant succeeded.
SQL> grant create any table to a;
Grant succeeded.
SQL> conn a/a
Connected.
SQL> create table tab1 (id number);
Table created.
SQL> insert into tab1 values (1);
1 row created.
SQL> commit;
Commit complete.
SQL> conn b/b
Connected.
SQL> create table tab1 (id number);
Table created.
SQL> insert into b.tab1 select * from tab1;
insert into b.tab1 select * from tab1
ERROR at line 1:
ORA-01031: insufficient privileges
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> grant insert any table to a;
Grant succeeded.
SQL> conn a/a
Connected.
SQL> insert into b.tab1 select * from tab1;
1 row created.
So you need to grant “*insert any table* “ privileges to a;
regards
Liakat hossain -
Dropping table using procedure
Hi
I am trying to drop all the tables available in the tname column of temp table .I am using the following procedure
create or replace procedure xyz is
v_table temp.tname%type;
v_temp varchar2(100);
cursor c is select tname from temp;
begin
open c;
loop
fetch c into v_table;
exit when c%NOTFOUND;
v_temp:='drop table'||v_table;
execute immediate v_temp;
end loop;
close c;
end;
the procedure compiling successfully
but iam getting the following error while executing the procedure
ERROR at line 1:
ORA-00950: invalid DROP option
ORA-06512: at line 1
any can one help me in solving this isssue??
thanks,
Balaji tkYou forgot to give a space:
try this:
create or replace procedure xyz is
v_table temp.tname%type;
v_temp varchar2(100);
cursor c is select tname from temp;
begin
open c;
loop
fetch c into v_table;
exit when c%NOTFOUND;
v_temp:='drop table '||v_table; -- given a space between table and v_table.
execute immediate v_temp;
end loop;
close c;
end;
/ -
Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3 insert into MyXmlTable
4 select *
5 from xmltable('//Entity' passing xmltype(x) columns "dcode"
6 varchar2(4000) path '/Entity/dcode',
7 "ddesc" varchar2(4000) path '/Entity/ddesc',
8 "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9 commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
SQL>
Ramin Hashimzade -
Table name input. and output i need all rows and columns using procedures
hi,
question: table name input. and output i need all rows and columns by using procedures.
thanks,
To AllAn example of using DBMS_SQL package to execute dynamic SQL (in this case to generate CSV data in a file)...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
,p_dir IN VARCHAR2
,p_header_file IN VARCHAR2
,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val VARCHAR2(4000);
v_n_val NUMBER;
v_d_val DATE;
v_ret NUMBER;
c NUMBER;
d NUMBER;
col_cnt INTEGER;
f BOOLEAN;
rec_tab DBMS_SQL.DESC_TAB;
col_num NUMBER;
v_fh UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
CASE rec_tab(j).col_type
WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
ELSE
DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
v_ret := DBMS_SQL.FETCH_ROWS(c);
EXIT WHEN v_ret = 0;
v_finaltxt := NULL;
FOR j in 1..col_cnt
LOOP
CASE rec_tab(j).col_type
WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
ELSE
v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
END CASE;
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required. -
Help Required :Excel Upload Into Oracle Table Using PLSQL Procedure/Package
Please Help , Urgent Help Needed.
Requirement is to Upload Excel file Into Oracle Table Using PLSQL Procedure/Package.
Case's are :
1. Excel File is On Users/ Client PC.
2. Application is on Remote Server(Oracle Forms D2k).
3. User Is Using Application Using Terminal Server LogIn.
4. So If User Will Use to GET_FILE_NAME() function of D2K to Get Excel File , D2k Will Try to pick File from That Remote Server(Bcs User Logind from Terminal Server Option).
5. Cannot Use Util_File Package Or Oracle Directory to Place That File on Server.
6. we are Using Oracle 8.7
So Need Some PL/SQL Package or Fuction/ Procedure to Upload Excel file on User's Pc to Oracle Table.
Please Guide me wd some Code. or with Some Pl/SQL Package, or With SOme Hint. Or any Link ....
Jus help to Sort This Issue ........
you can also write me on :
[email protected], [email protected]I also Tried to Use This
But How can i Use SQLLDR Command In Stored Procedure.
Well IN SQL*PlUS it is successfull but in Stored Procedure /Package ,PL/SQL does not recognise the OS commands.
So now my Question How can I recognise the SQLLDR Commnad in Stored Procedure. -
Help Required:How Upload Excel file Into Oracle Table Using PLSQL Procedure
Please Help , Urgent Help Needed.
Requirement is to Upload Excel file Into Oracle Table Using PLSQL Procedure/Package.
Case's are :
1. Excel File is On Users/ Client PC.
2. Application is on Remote Server(Oracle Forms D2k).
3. User Is Using Application Using Terminal Server LogIn.
4. So If User Will Use to GET_FILE_NAME() function of D2K to Get Excel File , D2k Will Try to pick File from That Remote Server(Bcs User Logind from Terminal Server Option).
5. Cannot Use Util_File Package Or Oracle Directory to Place That File on Server.
6. we are Using Oracle 8.7
So Need Some PL/SQL Package or Fuction/ Procedure to Upload Excel file on User's Pc to Oracle Table.
Please Guide me wd some Code. or with Some Pl/SQL Package, or With SOme Hint. Or any Link ....
Jus help to Sort This Issue ........
you can also write me on :
[email protected], [email protected]TEXT_IO is a PL/SQL package available only in Forms (you'll want to post in the Forms forum for more information). It is not available in a stored procedure in the database (where the equivalent package is UTL_FILE).
If the Terminal Server machine and the database machine do not have access to the file system on the client machine, no application running on either machine will have access to the file. Barring exceptional setups (like the FTP server on the client machine), your applications are not going to have more access to the client machine than the operating system does.
If you map the client drives from the Terminal Server box, there is the potential for your Forms application to access those files. If you want the files to be accessible to a stored procedure in the database, you'll need to move the files somewhere the database can access them.
Justin -
How to find the columns and tables used in a stored procedure?
Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBKFor example:
SQL> create or replace
2 procedure p1
3 is
4 cnt number;
5 begin
6 select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2 referenced_name
3 from dba_dependencies
4 where owner = 'SCOTT'
5 and name = 'P1'
6 and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER REFERENCED_NAME
SCOTT EMP
SQL> SY. -
How to insert into a table using a procedure in a trigger
I have following trigger and based on the some condition, it should inser a row in to a table using the procedure:
CREATE OR REPLACE TRIGGER RSSC.RR_SERV_ADD_ON_REQ_bu before update on RSSC.RR_SERV_ADD_ON_REQ
for each row
DECLARE
lr_appr_trans_hdr APPR_TRANS_HDR%ROWTYPE;
-- Inserting a row into APPR_TRANS_HDR table
lr_appr_trans_hdr.apth_ref_system := 'RSAO';
lr_appr_trans_hdr.apth_xref_col_name := 'RSAO_ADD_ON_REQ_NUM';
lr_appr_trans_hdr.apth_xref_id := :NEW.RSAO_ADD_ON_REQ_NUM;
lr_appr_trans_hdr.apth_trans_srce := 'I';
lr_appr_trans_hdr.apth_balance_amt := :NEW.RSAO_TOT_AMT;
lr_appr_trans_hdr.apth_is_finance_adj := 'N';
SPI_APPR_TRANS_HDR (
lr_appr_trans_hdr.apth_id
,lr_appr_trans_hdr.apth_create_dt
,lr_appr_trans_hdr.apth_create_user_id
,lr_appr_trans_hdr.apth_update_dt
,lr_appr_trans_hdr.apth_update_user_id
,lr_appr_trans_hdr.apth_ref_system
,lr_appr_trans_hdr.apth_xref_col_name
,lr_appr_trans_hdr.apth_xref_id
,lr_appr_trans_hdr.apth_trans_srce
,lr_appr_trans_hdr.apth_udc_name_cd
,lr_appr_trans_hdr.apth_udc_acct_num
,lr_appr_trans_hdr.apth_level1_apprvl_stat
,lr_appr_trans_hdr.apth_level1_apprvl_dt
,lr_appr_trans_hdr.apth_level1_apprvr_id
,lr_appr_trans_hdr.apth_level2_apprvl_stat
,lr_appr_trans_hdr.apth_level2_apprvl_dt
,lr_appr_trans_hdr.apth_level2_apprvr_id
,lr_appr_trans_hdr.apth_received_dt
,lr_appr_trans_hdr.apth_balance_amt
,lr_appr_trans_hdr.apth_cust_name
,lr_appr_trans_hdr.apth_sent_dt
,lr_appr_trans_hdr.apth_wbs_element
,lr_appr_trans_hdr.apth_gl_acct_num
,lr_appr_trans_hdr.apth_is_finance_adj );
When I use the above, it is saying wrong number of argument or type.
When I use the following instead, I am getting :NEW.APTH_ID must be declared.
SPI_APPR_TRANS_HDR('APPR_TRANS_HDR',to_char(:NEW.APTH_ID),'APTH_ID',:OLD.APTH_ID,:NEW.APTH_ID);
How can use the procedure in a trigger.
Following is the table structure:
Column Name Data Type Column Comments
APTH_ID NUMBER(16) Computed unique identified per large table standards (yyyymmddnnnnnnnn)
APTH_CREATE_DT DATE sysdate
APTH_CREATE_USER_ID VARCHAR2(65) ‘conv’
APTH_UPDATE_DT DATE sysdate
APTH_UPDATE_USER_ID VARCHAR2(65) ‘conv’
APTH_REF_SYSTEM VARCHAR2(4) ‘RSAO’
CPA_PREM_NUM NUMBER(13,0) NULL
RSR_REQ_NUM NUMBER(16) NULL
RSAO_ADD_ON_REQ_NUM NUMBER(16) rsao_add_on_req_num
APTH_TRANS_SRCE VARCHAR2(2) ‘I’
APTH_LDC_NAME_CD VARCHAR2(4) NULL
APTH_LDC_ACCT_NUM VARCHAR2(25) NULL
APTH_LEVEL1_APPROVAL_STAT VARCHAR2(1) NULL
APTH_LEVEL1_APPROVAL_DT DATE NULL.
APTH_LEVEL1_APPROVAL_ID VARCHAR2(30) NULL
APTH_LEVEL2_APPROVAL_STAT VARCHAR2(1) NULL
APTH_LEVEL2_APPROVAL_DT DATE NULL.
APTH_LEVEL2_APPROVAL_ID VARCHAR2(30) NULL
APTH_RECEIVED_DT DATE NULL
APTH_BALANCE_AMT NUMBER(11,2) RR_SERV_ADD_ON_REQ.rsao_tot_amt – amount previously extracted to sap
APTH_CUST_NAME VARCHAR2(65) NULL
APTH_SENT_DT DATE NULL
APTH_WBS_ELEMENT VARCHAR2(25) NULL
APTH_GL_ACCT_NUM VARCHAR2(15) NULL
APTH_IS_FINANC_ADJ VARCHAR2(1) ‘N’
Edited by: user652807 on Sep 3, 2008 4:51 PMIt appears you're missing the format mask in the TO_CHAR, ...
TO_CHAR(:new.apth,'YYYYMMHR24MISS')
The full code would help a bit more. -
Re : Hw to create a table and insert records using procedures
Hi..
I tried to run a procedure to create tables but is givin an error message "insufficient previlages" and when i tried to run it using a anonymous block i can create the tables..so can any one help me to resolve this issue.
Thanks in advance.
balveer.You don't have the privilege on creating the procedures. Hence you are not able to create tables through procedures. where as you can create table from anonymous blocks..
Maybe you are looking for
-
Plugins such as Adobe Acrobat and Microsoft Silverlight will show as needing an update on Plugin Check (http://www.mozilla.com/en-US/plugincheck/) but every time it downloads, installs, and restarts Firefox, the program is not updated. This error als
-
How to migrate DB from Access 97 to Oracle 8.1
The actual release of the Oracle Migration Workbench supports only Oracle 9i DB's. Is there any way to do this, without updating to Oracle 9i?
-
My pc sound level is very low on playback from dvd and most websites even though its at 100 percent
the playback level on dvd and most video streams is very low.(youtube seems ok)This is my second pavillion g7 w/ windows 7 .The first had a defective fan but the sound level was ok and there was a graphic eq section for sound control with other outpu
-
Smooth scrolling in mx:Datagrid
Hi All, I am implementing a datagrid in my extension for Illustrator CS5, 6. I want to have smooth scrolling in it as there are images that are displayed in the grid. I am using an ItemRenderer for displaying images. It has one column. I searched the
-
Hi, I am getting the following error in alert.log when raising an event using wf_event.raise() API and the sql session is being closed saying ORA-03113: end-of-file on communication channel. This error is happening only in 11gR2 only, its working fin