Annoying popup in Access Restrictions

I just installed my new E4200, and am setting the Access Restrictions. Is there anyway to block the popup window that displays every time I enter the form or save the settings?
I'm using IE9 and have tried adjusting the Popup Blocker, but to no avail.
Chuck

I have no idea what the reasoning was during the development of this page, but from a user's standpoint, I believe that displaying a popup this frequently is annoying. As a software engineer with over 30 years experience, I'm a firm believer that the user's point of view should be considered when developing an application. Therefore, I would never subject a user to this barrage of popups.
If there is a method for submitting change requests, please let me know.
Chuck

Similar Messages

I'm still getting all these annoying popups windows, although I followed every solution suggested(safari extentions,block the pop ups) it's really disturbing please help :(

I'm still getting all these annoying popups windows, although I followed every solution suggested(safari extensions,block the pop ups) it's really disturbing please help

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Access restriction to com.adobe.flexbuilder.codemodel library

I have Flash Builder 4 Standard installed in Eclipse 3.6.
I am writing an Eclipse plugin where I need to access the Flex project properties so I do something like this:
    import com.adobe.flexbuilder.codemodel.common.CMFactory;
    import com.adobe.flexbuilder.codemodel.project.*;
    IProject flexProject = CMFactory.getManager().getProjectFor(myEclipseProject);
I get this compilation error:
Access restriction: The method getProjectFor(IProject) from the type IEclipseProjectManager is not accessible due to restriction on required library C:\Program Files\Adobe \Adobe Flash Builder 4 Plug-in\eclipse\plugins\com.adobe.flexbuilder.codemodel_4.0.0.272416\codemodel.jar
Notes:
- If I turned it into a Warning I get a runtime exception: java.lang.NoClassDefFoundError: com/adobe/flexbuilder/codemodel/project/IEclipseProjectManager
- The plugin com.adobe.flexbuilder.codemodel_4.0.0.272416 is correctly imported in my project.
What does this Access restriction mean?
Why can't I access the Flex SDK for my licensed version of Flash Builder?
Thanks!
--Laurent

Here are steps to reproduce my problem:
1) From Eclipse File > New menu select "Plug-in Project"
2) Enter a project name, leave other options as-is
3) In the "Content" page of the wizard leave all fields as-is (Yes for Generate activator and this plug-in will make contribution to the UI. No for Rich Client application)
4) In the "Templates" page, select "Plug-in with a Popup menu"
5) This generates the project with a NewAction.java class.
Then modify NewAction.java as shown in the code sample below.
1) The "selectionChanged" method sets the _selectedProject variable.
2) The "run" method tries to get the flexProject information from the selected project
=> The import of CMFactory gives me an Access Restriction error "The type CMFactory is not accessible due to restriction on required library D:\Program Files\Adobe\Adobe Flash Builder 4 Plug-in\eclipse\plugins\com.adobe.flexbuilder.codemodel_4.0.0.272416\codemodel.jar
What restriction is this about?
How can one import the flexbuilder libraries in order to get information on the flex projects in this case?
Thanks!
--Laurent
import com.adobe.flexbuilder.codemodel.common.CMFactory;
import com.adobe.flexbuilder.codemodel.project.*;
public class NewAction implements IObjectActionDelegate {
private Shell shell;
private IProject _selectedProject;
public void run(IAction action) {
           // get the flexProject information
   IProject flexProject = CMFactory.getManager().getProjectFor(_selectedProject);
public void selectionChanged(IAction action, ISelection selection) {
          _selectedProject = null;
          boolean enabled = false;
          if (selection instanceof IStructuredSelection) {
            Object obj = ((IStructuredSelection) selection).getFirstElement();
            if (obj instanceof IProject) {
               IProject proj = (IProject)obj;
               if (proj.isOpen()) {
                  enabled = true;
                  _selectedProject = proj;
         action.setEnabled(enabled);

WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions

I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue. NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).
Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
This is the 2nd time it happened with 2 different models.
Please help ASAP.
Thank you,
Lance
(Mod note: Edited post. Some parts off topic.. Thanks!)

Also, you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

How to configure CLI/DNIS based access restriction in 5.3 ?

Hi,
does anybody have an idea how the setting
define CLI/DNIS-based access restrictions which is defined in ACS v. 4.2
can be configured in acs 5.3 ?
in v. 4 for every user in a group with 40 members a different CLI is defined for each. How can I configure that in version 5.3 ?
any help as always much appreciated!

The equivalebt to NAR functionality can be found at:
Policy Elements > Session Conditions > Network Conditions > End Station Filters
Can then define an object with a set of CLI values
These objects can then be used in policy conditions. So can create a condition with a set of CLI values and then match in authorization policy for values that are included in this set and set authorizations accoridngly
Not sure if this is your use case but hopefully may be a start

Access restrictions timing off by 1 hour

I don't know if anyone else is experiencing this problem. I have set access restrictions on my WRT610N router and they execute an hour earlier than set.
I checked the time zone settings, the system clock and all seem correct. I have a rule that is supposed to turn off access to the Internet at 11:55pm. However, the rule gets executed at 10:55pm.
This was happening on my first WRT610N which was also dropping network connections. So, I returned that unit and got a replacement.
The new unit does not drop connections but has the same timing problem. The only solution I have found is to change the time zone to the next one that is 1 hour behind my time zone.
Please let me know if anyone else has experienced this same situation.

My ISP is on the same town as I am. The information they are supplying appears to be correct as my WRT54G uses the same information and its rules execute properly.
I think there is a problem with the WRT610N. My solution is temporary I hope that Linksys will fix this problem.

WRTU54G-TM Slow Setup Page and HTML Error on Access Restrictions Page

I have a WRTU54G-TM Wireless Router. It has v1.00.21 firmware and I have done a reset with no solution. Everything seems to work, except the setup pages load very, very, very slow. Also in Internet explorer I get an HTML error on the access restrictions page. Resets don't help. The router did not have this issue until about a month ago that I recall. I can see on the access restrictions page the gray shading is all lined up except at the bottom on the page, like ther is some sort of issue in the html within the router.
One more problem, after I reset the router the saved config file I made would not change the default settings back, I had an older saved config file also, it would not work either.
Is this an issue with this firmware version? Any one else see this?
Message Edited by johnsonle9 on 01-24-2010 01:24 PM
Message Edited by johnsonle9 on 01-24-2010 01:24 PM

Are you getting the same problem with another computer...?
Try using different computer and check if you are getting the same problem or not...If yes then,I would suggest you to re-flash/upgrade the router's firmware,reset the router and re-configure it from scratch..Do not use the save config file.

Anyone besides me get an annoying popup that cannot be deleted/closed reading: FaceTime Password Please enter your password for "my e-mail account name" Never used FaceTime.

Dear Community,
Anyone besides me get an annoying popup that cannot be deleted/closed reading:
FaceTime Password
Please enter your password for "my e-mail account name"
It happened to me today for the first time since upgrading to Mavericks 10.9.3, no "stop lights" in the title bar of the popup, in fact nothing at all.
I've never established a FaceTime account. So I tried to delete FaceTime from the Applications folder on the "system" disk thinking this may eliminate the popup. Mavericks informed me "Cannot delete FaceTime as it is used by the operating system.
Is this a MAC virus? Or is this an example user community alpha/beta testing that Apple just announced?
TIA,
GonzoBernelli

That being the case, why then did the FaceTime popup even appear in the first place?
It's not clear to me what it is. If it occurs again, please take a screenshot of the popup and post it in a reply.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse button. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
The screenshot attachment option for this support site appears only on computers - not on iPads.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

Access Restrictions bug of firmware 1.01.1 for WRT54G V5 V6

I am using WRT54G V5.
The Access Restrictions function won't work properly when using firmwares 1.01.1 and 1.01.0. Ports can't be blocked by using the "Blocked Services" in this function.
Now I have to switch back to 1.00.9 to make the port blocking work, but there is a DHCP server issue which could only be fixed in 1.01.0 or above.... Could someone fix this BIG BUG and roll out a new firmware????
Thanks a bunch.
Message Edited by Dennis_Hsu on 01-08-200705:02 PM

What is your Fragmentation and RTS threshold value? I'm not sure if I'm reading your message right, but it says as far as I can understand 30. The value should be 2304 instead for both.
Ty changing the wireless channel also to either 1, 6 or 11.

Access restriction error? not sure how to fix it....

I am trying to use JPEGImageEncoder and i imported import com.sun.image.codec.jpeg.*; fine but i get the following error on my code:
CODE:
JPEGImageEncoder encoder =JPEGCodec.createJPEGEncoder(outImage);
ERROR:
Access restriction: The type JPEGImageEncoder is not accessible due to restriction on required library /usr/local/java/jdk1.6.0_07/jre/lib/rt.jar
I am not sure how to fix this... anyone know what needs to be done? I am using eclipse and i see the rt.jar in my library....
thanks!

MikeTheBorg wrote:
OK, I agree it's simpler for simple cases, but how do I do something like this:
          JPEGImageEncoder jie = JPEGCodec.createJPEGEncoder(os);
          JPEGEncodeParam jep = jie.getDefaultJPEGEncodeParam(bi);
          jep.setDensityUnit(JPEGEncodeParam.DENSITY_UNIT_DOTS_INCH);
          jep.setXDensity(1200);
          jep.setYDensity(1200);
          jep.setQuality(1, false);
          jie.setJPEGEncodeParam(jep);
          jie.encode(bi);
using ImageIO?
"Stupid" Eclipse+Maven refuse to compile this legacy code.It's an Eclipse error, not a Java/compiler error as such. To fix it, I believe you have to check your plug-in configuration -- imported packages here or exported packages there. Try adding "com.sun.image.codec.jpeg" to the imported packages. Something along those lines. Anyway, bottom line: this is not an issue with the code.
Furthermore, lookee here: GIAD

WRT160Nv3 problem with blocking traffic using Access Restrictions

Hi.
I want something quite simple. Block Youtube. I go into "Access Restrictions", choose a name for policy 1, enable it, choose the pc from the pc list, but then...
if a click Deny, all other options will be disabled (greyed out, can't click nor write on them).
Therefore, I can't put the urls I want (youtube).
I tried writing the url with "allow" and then change it to "deny" but it will block ALL traffic.
No good.
So, how do I make a new policy just to block this one URL?
Is it normal that when I click and choose "Deny" everything gets disabled afterwards?
Thanks in advance.
Regards,
Leo
Solved!
Go to Solution.

for internet access policy DENY means to restrict internet access during specified days and hours. this will block ALL internet traffic for the said schedule. website blocking by URL, blocking by means of keyword and blocking applications would then be NOT AVAILABLE as the computers would not have internet access to begin with if you have such a policy disabled.
for your case, you may want to try to set restriction to ALLOW internet access then specify youtube.com under Website Blocking by URL. this would allow computers to have access to the internet all the time (if you have the schedule set to EVERYDAY) or during specific days and hours but NOT have access to youtube.

I am getting spam to call someone for a virus alert and to purchase MacKeeper. How can I get rid of these annoying popups?

Hi All:
Which virus control software or malware product(s) or other strategies are suggested to install on my MacBook Pro (Mavericks OSX 10.9) to eliminate annoying popups and spam?

That is spam. Ignore it.
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and The Safe Mac » Adware Removal Tool.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

How do I get rid of annoying popups in Safari?

All of the sudden I started getting annoying popups in Safari. When I close them, they reopen a short time later. I have popups blocked in my preferences. Please help. It's driving me crazy.

Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(120751)

How do I get rid of annoying popups even after the proper settings have been checked?

Popup blocker is on but I still get annoying popups. When I use Google Chrome I do not get any popups. I tried for hours to get rid of these and also have asked questions with no answers.....I guess if you people cant help I'll have to resort to making GOOGLE CHROME my default browser....thats how bad the popups are!

I don't play hearts, but I do play Solebon Solitaire. I play the iPhone version on my iPad, but I see that they have a pro version for the iPad.
http://www.solebon.com/
probably didn't buy it cause I already had one. Anyway, lots of games, actually programmed so that you can win every once in a while. I really like it.
For Hearts, I'd look at reviews and ratings. That often gives you an indication if the app is any good or not.

Create access restriction in designer using script

Hello,
I am looking for a way to automate the creation of access restriction within universe.
I looked in the API universe reference and it seems that there is no entries for such an object
For information I use Business Objects XIR2 with SP3
Thanks for any help or answer

Creation/Modification of Universe Access Restrictions is not part of the Universe Designer SDK, but part of the BusinessObjects Enterprise SDK.
It requires sending requests to the CMS using the SDK to get User and UserGroup information.
For the COM-based version of the Enterprise SDK, the object is known as Overload, and described here:
[http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/BOE_SDK/boesdk_com_doc/doc/boesdk_com_doc/CrystalEnterpriseOverloadPluginLibrary.html#1351377]
Sincerely,
Ted Ueda

Annoying popup in Access Restrictions

Similar Messages

Maybe you are looking for