Another update failure and restore
An observation after another updater failure.
Do NOT update on a shared USB port. I have a USB dongle to let several USB devices be on one port. This is not normally not t a problem with syncing, but this will not work with iPad OS update.
Plug iPad directly into a USB port or it will probably fail. This is probably the same reason you can't plug into a keyboard USB port as not enough power to run the operation.
Apple recommends the same when syncing as well.
Similar Messages
-
i recently got my battery replaced in the 3GS and tried to update software and restore but phone is now stuck in recover mode. Please help
If it wasn't Apple who replaced the battery, then you've voided your warranty. Bring it back to whomever replaced the battery and tell them they probably broke your phone.
-
I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan
You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
Updating to iOS 5 removed the hack and the unofficial unlock.
All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source. -
Carrier data update failure and droping calls continously
This issue with my new iphone 4s with only 1 carrier not all
carrier data update failure and droping calls continously & bad quality.my carrier which is ZAIN TELECOM/Iraq that not resolved with restoreAfter managed to keep my Z10 running again, it informed me, that there was a new update available, released at 6:38pm with 88MB.
I installed it, hoping that it would terminate the problems I mentioned in my initial post...and:
I can now JOIN THIS PROBLEM FRACTION:
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Just-updated-to-latest-OS-and-phone-is-frozen-...
WHAT THE F IS WRONG WITH YOU PEOPLE????
I AM THAT CLOSE, SMASHING THAT DEVICE WITH A SLEDGEHAMMER!
Did I mention, that I normally charge my customers with 2.500€ a day, when they order my services as a communication consultant and that I do most of my business when I am mobile and traveling?
Due to Your sloppy work, I already "lost" a day, where I was not available and I did not get any kind of answer of You guys til know... Maybe I´ll should charge BlackBerry for each and every hour that I am "out of business" caused by Your work... -
When I turn my iphone on, after its been shut down (in cinema, meeting ect.) it turns on and off again. Yes I've tried updating it and restoring it. Infact i've just tried restoring it and now its been doing it for the past 3 hrs! HELP!
Did you restore as NEW, not using backup at all?
-
Getting "Firmware Update Failure" when restoring
My ipod mini kept giving me the folder and exclamation point icon and resetting didn't work to make it stop. I tried a few times to restore, but it keeps giving me the message "Firmware Update Failure. Disk Write Error" whenever I try to restore. Now what do I do? My ipod still just gives me the folder icon.
A couple of tricks to try:
1) Plug in whatever was last connected (charger, peripheral) and then try rebooting. Sometimes it just wants to see the last config
2) Try mounting on PC as USB drive (may take multiple tries). If successful, then REFORMAT just like an external HD.
At that point, you can "start over" with iPod update. -
my iphone will no longer open the itunes stores. updated and restored. no luck. help
Settings > General > Reset > Reset Network Connections
Try again. -
I just updated to iOS 5 and restored all my apps but the games I bought have disappeared off my iPhone and don't apear in iTunes on my computer. How do I restore them?
Download them again from the App Store. As long as you're signed in from the same account, you won't be charged again.
Best of luck. -
Updated software and restored ipod = frozen on apple screen
I don't know what to do! I've tried everything I have found that's supposed to help it work. I updated the software and restored my ipod...backed everything up. Went to plug in my ipod to sync it with itunes and it's frozen on the apple screen with a bar underneath indicating the process and it is frozen. I can't get anywhere but here. I've tried several times.
Any suggestions???
Thanks.Hi -
Take it to the apple store. They could probably help you. You need to make an appointment first (only available in U.S. or Canada). Or call 1-800-MY-APPLE, the address for the appointment is:
http://www.apple.com/support/expert/
Hope that helps!
SP -
Update failure and now phone wont turn on
please please help. as stated above the update failed and now the phone wont turn on.
i had charged the phone up so that wasnt the problem, it just said that the updater lost connection with my phone
can anyone help?
cheersYou did not specify what phone model you have.
Have a look at the link below to a post in the POK section regarding this issue.
/discussions/board/message?board.id=topfaq&thread.id=112 -
Creative Cloud update failures and resets
Today, my computer unexpectedly crashed. In order for it to repair itself, it had to "revert to a previous version". Doing so altered the Creative Cloud software that I had installed the day before. At first, it looked like it had been removed, since the Creative Cloud shortcut -- and the one I had made for the two programs I downloaded, Flash and Photoshop -- had disappared from my Desktop.
When I went in search of the files to launch the programs, I couldn't find them in Computer > Local Disk (:C) > Adobe > Flash CC/Photoshop CC where they had been before.
I opened Creative Cloud and saw that there were updates availalbe for these two programs. I thought this might improve something, so I tried to update.
Photoshop CC gets about 50% through the update and then fails. No matter how much I retry, the same thing happens. When I choose "Learn more" next to "Update failed", it gives me the following error message.
Clicking on "More Details" sends me here.
But none of the files here or in the sub-folder can be executed by my computer/
Flash, on the other hand, updated perfectly -- but when I click on the Flash launcher file, it gives me this message.
>>> NOTE: It occured to me that I should uninstall and reinstall the separate programs -- but when I open the "Uninstall a program" section on my Control Panel, it DOESN'T EVEN LIST Flash and Photoshop.
Through a convoluted series of attempts to fix the problem, I have deleted many of my Adobe files, restored them from the Recycle Bin, uninstalled the Creative Cloud from my control panel, reinstalled it, and still nothing seems to work.
I'm a freshman art school student, and I got this Creative Cloud program for free. I NEED the programs it offers. And I desperately hope someone can help me with this problem!Hello SamuraiJon
Here is a doc that should help your issue for this error u44m1p7
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html
Let me know if this helps or not.
If you find that this resolves your issue or was helpful, could you please take a moment to come back to this discussion and mark the post as helpful. Doing so greatly benefits your fellow users
Thanks
Scott -
After BIOS update failure and rollback, audio hot keys detect press but do not function
All other hot keys appear to function properly, only the mute/audio-/audio+ hot keys do not work.
I can press the key and the vertical volume indicator displays but it does not move.
At this time, I suspect this has to do with the failed BIOS update yesterday. All keys functioned properly before the failed BIOS update.
All HP drivers and software are updated to latest.
Another symptom I don't know may be related is that my bluetooth headphones have refused to connect once now without a full reboot. Bluetooth would connect and speaker audio audio would be muted, and sometimes "Manage Audio Devices" indicated connected to headphones but no headphone audo. Will warrant further watching.
The BIOS update was the most recent as of this writing and attenmpted to update only yesterday. I watched as the new BIOS progressed all the way to the point the BIOS attemnpted to flash and failed, then rolled back. I assume a backup was flashed because all my non-default BIOS settings had to be reset (non-UEFI boot, enable virtualization).
TIA,
Tony
BTW - I find it odd I can't just press a button to export/print my system configuration from the HP Support Assistant, I have to click every individual entry separately, but here goes...
The current running BIOS is F.63
The full results follows
HP ENVY TS 17 Notebook PC
5CG3331YPX
E9G82UA#ABA
Windows 8 64-bit
Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz
12GB
4GB Micron Technology 1600MHz
8GB Hynix 1600MHz
Intel(R) HD Graphics 4600
1920 x 1080
60
1965 KBC Version 93.51
F.63
IDT High Definition Audio CODEC
Bluetooth Hands-free AudioSeems after another day,
The problem resolved itself.
No reboot, no significant changes to the machine I can think of since my original post.
Just a spontaneous self-fix.
Thx,
Tony -
I have a fairly new iPod touch and the touch screen has suddenly stopped working..... Like the bottom row of apps has stopped working and certain buttons on the keypad are not working at all what so ever I have taken it to the apple store once before they told me to update it I did so and it didn't get better I have also restored it multiple times still nothing I really would like a working I pod please help!!!
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
Error - updating software and restoring
Hi,
I recently purchased an iPod Touch with software version 1.1.3 (with software upgrade). I recently connected to my laptop and it told me version 1.1.4 was available to download which I did. But when it comes to installing it says 'The iPod could not be updated. An unknown error occurred (1602)'. I have also tried restoring but get same error message.
Any ideas?
Thanks very muchWelcome to Discussions,
See if anything in these articles help,
http://docs.info.apple.com/article.html?artnum=306084
http://docs.info.apple.com/article.html?artnum=307219
fern -
Repeated Update Failures and Misreadings
After the most recent update (2.01 bundle 358), owner deleted Zinio manually from the tablet. Destop Software reads the playbook as having OS 0.0 bundle 0, while table says it has 2.01 bundle 358. Steps tried:
1. Install update. Result: update failed.
2. Download Zinio from App World, install update. Result: update failed.
3. Restart playbook, install update, update complete, unplug playbook, hit okay, playbook restarted, replug playbook into computer. Result: OS reads as 0.0 bundle 0.
4. Restart playbook, restart computer. Result: OS reads as 0.0 bundle 0.
Side effects: Desktop software doesn't allow anything but OS updates and backups, computer cannot read blackberry device as being plugged in (i.e. cannot see it in Computer folder), as a result cannot transfer files from computer to playbook. System tray on computer recognizes when playbook is plugged in. Desktop software still recognizes device, but reads OS wrong.
Suggestions?Hopefully you have copies of pic, videos and documents.
Try the following it is to debrick the playbook. I seriously hope this will help you.
First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Credit for this solution goes to knottyrope.
Be a Shepard and not an iSheep.
Maybe you are looking for
-
Customer statements - Email & print at the same time - Is this possible?
Hi all, We generate customer statements at regular intervals and send them to the customers, through mail, fax and email. We have a print program which generates the customer statement. For some customers we want the statements to be printed as well
-
How do I set up microsoft office on my macbook air?
I have a product key for my microsoft office that I bought but I am not quite sure where I need to put it in to download the office
-
Running SSIS Package from another server and performance
I've built an SSIS package that integrates data from one SQL Server 2008 database to another SQL Server 2008 database. However, since I needed to leverage some SSIS 2012 components, I've installed the package on another SQL Server 2012 in the networ
-
How to use stack canvas in tab canvas in oracle forms
hi all, how to use stack canvas in tab canvas in oracle forms. please if any one help out in this.
-
Fingerprint-GUI non-functional
When attempting to login from lock screen, the green light on my ThinkPad T410's scanner lights up, and the on-screen indicator works as well, but after swiping, nothing happens. If I enter my password I can log in normally. I am using LightDM and Ci