Any Blue Flicker Problems?

I have been experiencing with frustrating blue flickers after upgrading to IMovie 09 and am about to give up. Looks like Express 4 will be the way I go and LEARN how to use it.
Has anyone experiencing any "technical" or "blue flickers" problems with Express 4 AFTER upgrading to IMovie '09 and experiencing the "blue flicker"?
Is this the way I should go? The movie project I am working on is way too important to risk any "experimenting"
Thanks for any input!

I have never heard of a "blue flicker" and why you should be experiencing one, whatever it may be, could only be guessed at after you give precise details of what you mean and under what circumstances it occurs.
The peculiarity of its nature suggests that it is possibly caused by something that you are doing incorrectly.

Similar Messages

IMac G5 Graphic Card Replacement for blue screen problem

When I turn on iMac, I only see blue screen, the apple technician said Need to replace graphic card, Nvidia Gforce 7600GT 256.
1, can it install in IMac? Seem like it work for PC?
2, I had blue screen problem several time, I think I turn on iMac too long, so it burn out graphic card.
3, I have 2007 G5 24" screen model, is any durable and afford graphic card you recommend?
Where to buy for cheaper price?
Do I need to change mother board?
4, can I replace it by myself? Any picture or video for graphic card replacement?
Thank you.

If you look around, you might be able to find someone who will replace just the chip on the graphics card, which is what usually fails. It will take someone highly skilled; they really have to know what they're doing--it's not an ordinary soldering job.
Here's someone who found a non-Apple service to do this, and it proved to be far less expensive than a full logic board replacement. But I think this was in the UK.
https://discussions.apple.com/thread/4996559?start=0&tstart=0
I have no personal experience with this outfit, but you might check them out.
http://dttservice.com/

Macbook pro retina screen flicking problem

I bought this 15 inches Macbook pro back in Nov, 2012. And I have the screen flicking problem in Dec.
The problem is the same here listed on youtube. You can find hundres of them just by searching "retina flicker" on youtube.
http://www.youtube.com/watch?v=Ko6WCqw20ZE
And I did a lot of researches on this. I had also gone to the Apple Store 2 times, one Genius Bar Staff told me this has to be a hardware problem and offer to fix my laptop, others said it might be a software based problem and adviced me to wait for the new system update. I don't have time for a long fixing so I chose waiting. That particular one who told me to wait for the next software update also encourage me to dig deep and tried to find the root cause by myself...and I did. I found my screen flicking problem could caused by cellphone inteference. And It seems that the Wi-Fi antena is also a key component here. If I turn off Wi-Fi completely, the flickering went away.
Some solutions I found online
1. It can caused by Enable Safari webGL. So disable webGL and turn off develop mode
2. Disable displaycard auto switch in Power saving tab
3. Close the lid put the sytem into sleep and re-open the lid
4. stop using Wi-Fi. That's right people, try disable Wi-Fi!! It's the only working solution for me.
5. It could be caused by CDMA cellphones including US Verizon brand cellphones and many others. GSM cellphones are OK. Try to turn off your cellphone or drive to a empty plaza and try to see your laptop still flickering at your car. Turn off your cellphone when You do this.
What doesn't work
Reboot
reinstall OS
go to Apple Store and change Logic Board (Someone reported that after logic board change, the problem came back after a while)
Let me know if you guys have any findings, Thanks!!

I'm sure that you've seen the problem with 'burn-in' and 'ghosting' on some MBP-R machines in threads on this forum. It doesn't seem to be an overwhelming problem, but some have reported it.
Did you buy it from an Apple Store or online? Either way, you need to get tough with Apple. Tell them you need to keep your computer and, when they deliver a replacement to your local Apple Store, you'll bring it in for exchange. That's what they've been doing with most people that have had MBP-R problems - I've never heard of them requesting that you send your computer back before they will exchange. Did you contact your local Apple Store or was this response from an AppleCare phone conversation. If the latter, take it into the Apple Store, explain what you want to do, and I'm sure that they will work with you.
Good luck,
Clinton

APE11 will not recognize any blu-ray media

I have APE11 and attempting to burn a project to blu-ray. My problem is that APE11 recognizes the blu-ray burner but will not recognize any blu-ray discs. I have tried various BD-R and BD-R DL discs to no avail. I receive a "Media not present" message. If I select the same burner but choose to create a DVD, I receive a "Incompatible disc" message. This leads me that it sees the discs but I'm not sure what's up with the blu-ray option. The blu-ray discs are Verbatim and Windows recognizes the discs as well. Any and all suggestions are welcome.

robertjeffrey
What Blu-ray burner do you have? Is it recognized in the Device Manager under DVD/CD-ROM drives? Driver and Firmware up to date?
What burn software came with the Blu-ray burner? If it is part of the CyberLink family, can you use the PowerProducer of the series to burn to Blu-ray disc format on a Blu-ray disc using these Blu-ray discs that Premiere Elements burn dialog is labelling "Media Not Present"? I would like to see the results of that test if possible.
Just to get it out of the way (maybe helpful), let us flush the preferences...
Assuming your Premiere Elements 11 is on Windows 7 or 8 64 bit....
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
11
and in the 11 Folder is the Adobe Premiere Elements Prefs Folder that you delete. If that does not work, then delete the whole 11 Folder in which it exists.Make sure that you are working with Folder Options/Show Hidden Files, Folders, and Drives active so that you can see the path described.
If that does not work, a complete Deactivation from Help Menu/Deactivate followed by the usual Control Panel uninstalled followed by reinstall may be in order. I am hoping the results from a CyberLink PowerProducer burn to may give us some valuable information so that we do not have to resort to uninstall/reinstall.
Are you using BD-R 25 GB 2X? What is this BD-R DL? Is that the 50 GB for Blu-ray? Do you have any BD-RE 25 GB 6X? How much are you planning on putting on this Blu-ray disc in terms of Space Required and duration?
Let us start here and then we can decide what next.
Thanks.
ATR

MacBook Flicker Problem - on Leopard?

Hi!
Just to see any possible solutions, if anybody with the flicker problem has the possibility to install the OS X 10.5 (Leopard), please let us know if the flicker is present also on Leopard.
As far as I saw by now, it happens under Windows XP in BootCamp with various users.
Thanks!
Cristian.

Your right checking a bug would be OK. Problem is they couldn't tell us about it because it involves Leopard, that is where the NDA applies. Also there is a lot of time between now and October so even if it existed at this moment it may not still be there in October when Leopard is released.
I guess I have been lucky I haven't had the flicker problem.

Any Bluetooth audio problems since upgrading to ICS?

Hi.
Was wondering if anyone has had any Bluetooth audio problems since upgrading to ICS? In particular, have you had any stuttering and/or pauses in streaming since the upgrade?
I use a MW600 with my phone and I get stuttering and pauses every few minutes between the phone and the MW600 which is very annoying - to the point where I can't reliably use the phone for audio any more.
Thanks
Savcom

Sorry but it seems to be a problem some users are experiencing. It's already been reported so hopefully there will be a fix for this soon.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HT5935 Does any one have problem in FaceTime after updating to iOS 7

Does any one have problem in FaceTime after updating to iOS 7

No, none whatsoever. If you would describe your issue, someone may be able to assist.

[svn:fx-trunk] 8452: - Fix flicker problem with constraint bound text that is being autoSized.

Revision: 8452
Author:   [email protected]
Date:     2009-07-08 08:38:32 -0700 (Wed, 08 Jul 2009)
Log Message:
- Fix flicker problem with constraint bound text that is being autoSized. If the remeasure is done in a 2nd pass you will see a flicker as all the objects are moved to accommodate the reflowed text.
- Fix data binding issue with text setter.
- Rework measure() to accommodate implicit autoSize.
If explicitWidth or widthInChars specified and explicitHeight or heightInLines specified, or for now, blockProgression != "tb", the text has fixed dimensions and is not auto-sized.
If no text and width specified, but no height, start at specified width and one line high and grow taller.
If no text and height specified, start at 1 char wide with the specified height and grow wider.
If neither width nor height specified, and toFit lineBreaks, start at explicitMaxWidth, or default maxWidth of 160, and grow taller.
If neither width nor height specified, and explicit lineBreaks width is unlimited and can grow taller.
These are further constrained by min/max Width and Height except in the case that explicitWidth or explicitHeight are specified.
- Change default maxWidth for RichText and SimpleText to 160 to match RET. Previously it was 10000. This is used for
text with toFit lineBreaks if a width isn't specified.
QA Notes: 12 or so TextGraphic tests fail because of the new default maxWidth.
Doc Notes:SDK-22014, SDK-21837
Reviewers: Gordon
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22014
    http://bugs.adobe.com/jira/browse/SDK-21837
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextContainerManager.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicE lement.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/RichEditable TextEditManager.as

You have used elements like header, footer, footer1 and nav without using the correct DOCTYPE declaration. Replace the first line of your code with
<!doctype html>
Also have a look here for other problems http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.surewest.net%2Fstorytales%2F test%2Fforposting.html
After the above has been fixed, please come back here to fix the remaining problem(s)
Gramps

Is any one having problems with Iphone 4 s being slow after ios 7.0.3 update?

Any one having issues with this update. Phone was working fine untill this update. I am having low signal, goes inbetween 1x and 3g, apps slow to load if at all, apps crash and to top it off, heavy battery drain. I did not have any of this problem before 7.0.3 update.

See this discussion...
https://discussions.apple.com/message/23731048#23731048

Are there any conflicts or problems having 2 browsers on the same computer using windows 7

I have no experience with having different browsers on the same computer and want to know if there are any conflicts or problems before I download a second browser.

There are no conflicts if you install multiple browsers to the same computer. You can do that just fine.

HT5622 iPad 3 and my sound has stopped from speakers, but can get from headphones. It's not the side switch and the volume is max in all areas. Anyone got any ideas, what problem is and how to fix it thanks

Hi,
My iPad has just stopped working with sound from the speakers, it works fine with the headphones in. The soft mute button is not made and the volume is at max.
Any ideas what problem is and how to sort. Thanks

System sounds can be muted from the software switch in the task bar as well as from the side switch depending on how you have it set up. This my boilerplate resonse for sound issues.
1. If you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Vbios request r9 280x screen flicker problem

Hello,
I own a r9 280x video card and I'm having the screen flicker problem that others have as well. I would like to request a new vbios that would hopefully fix this problem.
S/N: 602-V277-26SB131010-XXXX
vbios info: http://w ww.sendspace.com/file/c7p75e
Thank you.

reflash to this one

My iPad will not discover any blue tooth devices

My iPad will not discover any blue tooth devices. The Bluetooth is turned on but it will only discover a Blackberry phone and not my other iPad or 5s and 4s or a QED receiver.

To connect the devices over bluetooth, just enable Bluetooth in Settings app on both devices.
Bluetooth is activated automatically when Wi-Fi connectivity is not available or does not work properly.
Note: Initial Bluetooth connection takes around 15 seconds to activate.
This is the directions for the app. And all the reviews seem to just go right on through! I have a love hate relationship with my apples!!
Thank you so much by the way for trying to help me!

Light Flicker Problems

Hi There,
I've been having some problems concerning a video I'm making. After importing all the Video I've noticed a flicker problem on the image. Its almost like a very small glow of light that is that is constantly flickering. The footage was filmed in the U.S and edited in the UK, so not sure if its to do with the difference in Hz from the ceiling lights or if theres an uneven exposure from the camera? If theres anyone who would know how to minimalise the flicker problem on Final Cut Pro it would be a big help.
Many Thanks
Matt

There most certainly could be a frequency problem with lights. Are they flourescent or sodium lights? Those kind of lights do pulse and are more problematic when used in slo motion captured material.
Also you can get problems with these lights with shuttered movie cameras and telecining to tape. Throw in the NTSC > PAL conversion will only exacerbate the problem!
Can you post an example clip?
The flicker filter in FCP won't help as that only corrects interlace problems.

Any Blue Flicker Problems?

Similar Messages

Maybe you are looking for