Any equalizer program in LabVIEW SVT which can control the dBPa under 1/3 octave frequency band?

Could we adjust the dBPa of a wav file by equalizer and then save the dBPa modified file to the other wav file for play? The equalizer should be controlled under 1/3 octave frequency band.

Taipo,
If you import the .wav file into LabVIEW and convert it to the waveform data type, you could use the SVT to do third-octave analysis on the waveform and then use the SVT Weighting Filter VI to adjust the level of different octaves in the signal.
If you are looking for a pre-made equalizer example for a .wav file in LabVIEW, we do not have an example that does that at this time. However, there are many programs available on the internet that can equalize a .wav file.
Sincerely,
Ross C
Applications Engineer
National Instruments

Similar Messages

My FP-2000 creates a file but cannot write any more in this file. Which can be the cause for it?

I create files on my FP-2000 to save data .
This application functioned very well before ; but now without apparent reason, the file is created without error but the writing is impossible. The cluster of error at the exit of VI "Write File" indicates code 6: "Warning 6 occurred at an unidentified location. Possible reasons: LabVIEW: Generic file I/O error."
Which could be the reason for it?
Could my FP-2000 be damaged (flash memory)?

I have almost the same problem. I'am logging data with my cFP 2020. Writing to the flash of 2020 or to the external compact flash port.
For some reason the cFP returns a Generic file I/O error after quite a while. And it's not that I'm running out of free space.
Anyone got some ideas?

Do we have any infotype which can capture the present Cost to Company (CTC)

Dear guru's,
Do we have any infotype which can capture the cost to company and if something is there can we utilise that in Recruitment module r/3.
Appreciate some quick responses.
Regards,
Rajasekar.

Yeah sure.. usually we dodnt have any tracing to get outgoing call.. even though we have 700 mins we use 400 in one month and 1000 in next month.. to balance this it will be very useful but from the couple of comments this app is not recemended ..and ther was not rating and contact option indeed
anyway thanks for your time ..Please let me know if u find any app which suits my case .. thanks again!!

Do I need to download any antivirus Program for IPad 2, which program is better?

Do I need to download any antivirus Program for IPad 2, which program is better?

But you could have viruses that may not effect an iOS device or even a Mac, but could easily be unwittingly passed on to PC users. So, if you send and receive a lot of email with attachments,and many of your receivers are PC users, you may consider whether you want to risk forwarding them a virus, etc.
http://itunes.apple.com/us/app/virusbarrier/id436111378?mt=8

Need RFC which can post the Goods Receipt

Hi,
My scenario is to post the Goods receipt, by using file and after posting the Goods Receipt i want the acknowledgement whether it is successful or unsuccessful. There is an idoc MBGMCR02 which can post the Goods Receipt but application acknowledgement is not possible in file to idoc scenario, so now i am searching for a RFC so that i can handle this situation using BPM synchronous process. Kindly suggest any RFC or BAPI which can post the Goods Receipt.
Thanks & Regards,
Venkat

Hi Venkat,
As per my understanding this is a "File To (Inbound) Proxy" scenario, in which you can use the BAPI "SD_SHIPMENT_POST_GOODS_ISSUE" to do the PGI into R/3 system.
To perform this, you can go-ahead with the steps as mentioned below:
Source (XI) System:
1. Create the source & target data type in XI.
2. Do required mapping in XI.
3. In configuration directory, use the adapter type "XI" on the receiver communication channel.
Target (R/3) System:
1. Call transaction "SPROXY".
2. Create the interface class (double click on Inbound message Interface, inside your namespace in R/3).
3. Inside the class (proxy), create an internal table to keep all the records which will be coming from XI after your mapping.
4. Pass all the data to above create internal table.
5. Now, call function module "SD_SHIPMENT_POST_GOODS_ISSUE" and pass all required data from ur internal table to this FM (BAPI).
Note: Kindly read about this FM (BAPI) first in SE37 under "Function Module Documentation".
6. Do commit work after calling the FM (BAPI).
I hope this will help you to resolve all your queries.
Regards,
Sarvesh Singh

Standard report which can show the details of Invoice value and PO value

Hi all,
Is there any standard report which can show the details of Invoice value is more than 5% of PO value. MIRO value and PO value.
If any report which caters the maximum requirement is also fine
Regards
Sanjith
Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

Hi
Please refer the below mentioned link
/thread/1789934 [original link is broken]
Regards
Praveen P C

Looking for a Powershell Script which can put the scom servers in maintenance mode

Looking for a Powershell Script which can put the scom servers in maintenance mode so that SCOM should not send an alert during planned task.
Rahul

1. Provide list of servers line-by-line in C:\ServerList.txt, make sure you provide limited no. of servers, do not exceed 20 - 25 per batch
2. Save the script with suitable name (test.ps1)
3. Open PowerShell cmd prompt
4. Script accepts 3 params - TimeInMinutes, Reason and Comment
**** Please note, this script will work for SCOM 2012 R2
param([int32]$TimeMin, [string]$Reason, [string]$Comment)
try
$api = new-object -comObject 'MOM.ScriptAPI'
Import-Module operationsmanager
New-SCOMManagementGroupConnection
$Servers = Get-Content "C:\ServerList.txt"
$Time = (Get-Date).Addminutes($TimeMin)
Foreach ($Server in $Servers)
#Get Computer instance
$ComputerClass = Get-SCOMClass -Name Microsoft.Windows.Computer
$ComputerClassInstance = Get-SCOMClassInstance -Class $ComputerClass | Where {$_.DisplayName -eq $Server}
If ($ComputerClassInstance -ne $Null)
$HealthServiceWatcherClass = Get-SCOMClass -name:Microsoft.SystemCenter.HealthServiceWatcher
#Get Health Service Watcher Class instance of the server
$HSWClass = Get-SCOMClass -Name Microsoft.SystemCenter.HealthServiceWatcher
$HSWClassIns = Get-SCOMClassInstance -Class $HSWClass | Where {$_.DisplayName -eq $Server}
#Starting the maintenance mode
Start-SCOMMaintenanceMode -Instance $HSWClassIns -EndTime $Time -Reason $Reason -Comment $Comment
Start-SCOMMaintenanceMode -Instance $ComputerClassInstance -EndTime $Time -Reason $Reason -Comment $Comment
Write-Host "Health Service Watcher and Agent server "$Server " kept in maintenance mode" -foregroundcolor "green"
$api.LogScriptEvent('MaintenanceModeScript.ps1', 200, 0, "$Server kept in maintenance mode for $TimeMin minutes")
Else
Write-Host $Server" not found " -foregroundcolor "red"
$api.LogScriptEvent('MaintenanceModeScript.ps1', 201, 1, "$Server could not be found in domain")
Catch [system.exception]
$api.LogScriptEvent('MaintenanceModeScript.ps1', 201, 1, $_.Exception.Message)
Faizan

Is there a tool which can check the version of latest version available?

I need a tool which can check the version of latest firmware available for UCS servers. The point is avoid running old firmwares.
If the tool can download the firmware that's like cherry on the cake.

Hi Marsbar,
=COUNTIF(range,"done") will return the number of cells in the specified range containing only the string "done"
If the range is a single column, (eg. column E):
=COUNTIF(E,"done")
The formula is in cell A1 of the table, but may be placed anywhere (except in column E, unless it is in a Header row or Footer row).
Regards,
Barry

I have just purchased the new Canon 7D II. I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered. I have updated both CS6 and LR so that is not the problem.

I have just purchased the new Canon 7D II. I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered. I have updated both CS6 and LR so that is not the problem. Not sure what to do next.

It has been indicated that both of those cameras will be supported in the final release of Camera Raw 8.7. But there is no announced release date. There never is. I assume it will be before December 31. But that is only my guess based on the fact that the release candidate expires then.

How can I cancel my subscripction before 30 days are passed? I don't find any telephone number or addresse where I can do the cancel. Anybody can help me? thanks

How can I cancel my subscripction before 30 days are passed? I don't find any telephone number or addresse where I can do the cancel. Anybody can help me? thanks

Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Whether the NI step controller can control the digital servo driver and motor

I want to you can help me confirm whether the NI step controller can control the digital servo driver and motor.If can,what is the differents between servo controller and step controller to control servo motor?Thank you so much!
Best regards

The PCI/PXI/FW 7344 high precision controller can be used to control both steppers and servo motors. The older PC Step controllers are made for stepper only control. The difference in the two control types is with stepper control, the controller outputs two digital signals that control the step and direction of the motor. The drive uses these digital signals to energize the stepper phases and commutate the motor. In a servo system, the controller outputs a -10 to 10 Volt analog signal that the drive then uses to output the appropriate current to the motor which is proportional to torque.
You can get more information from the following website:
http://zone.ni.com/devzone/devzone.nsf/webcategories/69771825AE23E98E86256786000BEA02?opendocument
Please let u
s know if you have any further questions.
Regards,
Andy Bell
Applications Engineer
National Instruments

Is there a way I can control the resolution of the photos I transfer to the iPad?

Is there a way I can control the resolution of the photos I transfer to the New iPad? I just received the new iPad and would like to reduce the size of the resolution of the pictures I am transferring.
I have storage capacity issue and I am only able to transfer about half the number of pictures I had on original Ipad with the same storage capacity. I upgraded to the New Ipad and I am transferring all the pictures I had in the original Ipad. I do not know why they are not all transfering since the New Ipad got full before all the pictutres where transfered. I used Itunes to transfer the pictures I have in Iphoto . I assume this is because the New Ipad has a higher resolution screen and is allowing the pictures to be transfered automatically to the New Ipad at a higher resolution than the original Ipad?
Any thoughts?
Ed

edgodoy wrote:
However, is there a way I can increase the number of pictures I can transfer to the New Ipad using Itunes?
I have a Canon 7D and the picture are large.
Step my step instructions, would be great if it is at all possible.
What you as is difficult without knowing your exact circumstances, i.e. what format pictures are you sending, do you shoot in .jpg or shoot in RAW and convert to .jpg, etc. However, I don't see a way to quickly reduce the size of your image files without reprocessing your files in some manner.
You could export all of the images to be loaded onto your iPad in JPEG format using Lightroom or Aperture and greatly lower the quality setting in the .jpg export. If you do this make sure you export to a new folder. Lowering the quality can have a huge impact on the size of the image files. If this worked it would give you the advantage of still having the largest amount of pixels allowable on the iPad 3. I found that on my iPad 2 I could 'get away' with setting the quality to around 50 without seeing any obvious changes. A higher quality setting may or may not be required on the iPad 3, time will tell and as my iPad 3 is going back I've not taken the time to put more than a few sample (800 or so) images on it. They were exported at a quality setting of 60 and look as well as can be expected considering my defective iPad 3 display.
If you images are already exported at a lower quality setting and are still too large the next step would be to reduce the dimensions of the image. Lightroom has this capability. I don't know about Aperture, but I assume it does.
My normal workflow with my 7D:
Take picture in RAW.
Transfer to Lightroom 4 converting the Canon RAW files to Adobe's DNG format.
Process images in Lightroom. If any need further processing then export to Photoshop and/or Nik plug-ins.
Export processed images that I wish to have on my iPad to my Pictures folder in .jpg format using a quality setting of 60. I do not reduce the dimension of the image as I want the maximum sized images my iPad will allow. As I only transfer a couple of thousand size is not an issue.
Use iTunes to Sync photos to iPad.
As was mentioned by a previous poster you could use Photoshop to bulk process the photos but that requires both Photoshop and a knowledge of creating a bulk action. Not hard, but very confusing if you haven't used both Photoshop and the bulk process before.
There may be other methods that could work for you but I am not aware of them. With the breadth of experience of the members of this forum perhaps someone else could chime in with suggestions.

I just purchased to songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

I just purchased two songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

iTunes: How to convert a song to a different file format

Looking for a Bluetooth headset that can control the iPhone's volume

Hey guys,
I'm looking to buy a cheap bluetooth headset that can control the iPhone's volume. The reason why I'm looking for that is because I want to take remote pictures. I currently have the Motorola H350 and it does have volume buttons except they control the headset's volume, not the iPhone's.
I was wondering if you guys could help me.
Thank you.

Like ur self, I'm also looking for a bluetooth that can trigger the cam on iphone 4s, mainly for moment when I'm all alone for a picture.
Have tried the following earphone without success, all purchase through Apple Store, guess will have to source somewhere else.
1. Jawbone ERA - failed
2. Bose BLuetooth Headset series II - failed

My buttons on my nano arent working but i can control the volume and center

my buttons on my nano arent working but i can control the volume and center buttons and idk y its acting up

Try Restoring it in iTunes. If that does not work you will probably need to get it serviced.

Any equalizer program in LabVIEW SVT which can control the dBPa under 1/3 octave frequency band?

Similar Messages

Maybe you are looking for