Any Ideas - warning message

Does anyone have an idea, my 3G iPhone has suddenly started showing a warning message when switched on saying 'This accessory is not made to work with iPhone' and suggest switching to plane mode. Any ideas?

Thats the standard message when you use a non "Works with iPhone" accessory. Nothing to worry about. It can also be caused by debris in the dock connector.

Similar Messages

Any Idea Which Message type/Idoc Type should be used for FI Invoice

Hi Experts,
Any idea what message type/Idoc type should be used for FI invoice. We are going to send IDOC from R/3 to Non-SAP System using ALE. We are using T-codes FV60/FV65.
Thanks,
Sony

Hi Sony,
I never dealt with FI IDoc.
I think you need to setup EDI outgoing payment in IMG. Please take look this report <b>RFFOALE1</b> - ALE Distribution of Payment Data and <b>RFFOEDI1</b> and check also the program documentation.
Hope this will help.
Regards,
Ferry Lianto

Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?

Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?
Messages stopped recognsing non iPhones after 10.10.1 update. iPhone 6 and Mac on same wifi and both have iCloud on. Any ideas?

Handoff Continuity Troubleshooting

Warning message not shown in web browser after account is locked.

Hi,
I have the following configuration enabled for Access Manager:
Access Manager 7.0 with patch 120955-04
Web server 6.1 with patch 116649-20
Directory Server 5.2 SP4
1.) Individual password policy setup in directory server to lockout accounts after 3 failed login attempts.
2.) Account lockout option enabled in Access Manager to lockout accounts after 3 failed login attempts.
The issue that I face is the following:
After, 3 consecutive failed login attempts and from the fourth login attempt,
the Access manager does not give
any error/warning messages on the browser, but redirects the user back to the login screen as the
account is locked/inactive.
This is sort of annoying as the user is confused as to why he is being redirected to the
login screen.
This issue is very much reproducible as below:
1.) Create an individual password policy to lockout user after 3 failed login attempts and assign it to the specific user.
2.) configure access manager to lock the account after 3 failed login attempts.
3.) on attempting to login on the fourth attempt (correct or incorrect) the user is redirected to the login screen without any warning.
Is this a known issue in Access Manager ?
Can we configure the Access Manager so that a warning message is provided to the user after the account is locked.
Thanks,

This option has been set and we do get a warning after the second failed login attempt.
When a failed login occurs the third time consecutively the user account is locked and a warning is shown.
However, now if the user tries to login (say fourth time with the correct/incorrect password) he is redirected back to the login screen without any warning or error messages.
This seems to be annoying as the user is redirected back to the login screen continuously without any messages.
I am able to reproduce this problem on my test box and was wondering
if this is a known issue.
Thanks,

Unable to check plugins for 2 weeks now-error message-went to "help" & was warned I am using outdated version-so went to update but not available....any ideas? I am computer literate so you don't have to over-simplify your answer ; ) Thanks!

I keep rec. an error message every time I try to do a plugin check. It says "error finding service" and asks me to try again later. I have been trying for a couple weeks now and still get the same error. I clicked on "help" and was brought to a page that told me I am using an "insecure version" of Firefox....(LOL "INsecure...like it's scared, not sure what to do?? Shouldn't that be UNsecure?) Anyway, I thought I had the most recent version but maybe not so I clicked on the link to update Firefox. That took me to a page that told me all about how Firefox automatically updates unless I opt for it NOT to do this (I have not opted out of this feature) etc etc etc.....and there is no button to click to update now. I am unable to rectify this problem and I think some of the plugins ARE out of date but because of the error message I keep getting I can't check on them or update them. Any ideas will be greatly appreciated. Thanks!

I keep rec. an error message every time I try to do a plugin check. It says "error finding service" and asks me to try again later. I have been trying for a couple weeks now and still get the same error. I clicked on "help" and was brought to a page that told me I am using an "insecure version" of Firefox....(LOL "INsecure...like it's scared, not sure what to do?? Shouldn't that be UNsecure?) Anyway, I thought I had the most recent version but maybe not so I clicked on the link to update Firefox. That took me to a page that told me all about how Firefox automatically updates unless I opt for it NOT to do this (I have not opted out of this feature) etc etc etc.....and there is no button to click to update now. I am unable to rectify this problem and I think some of the plugins ARE out of date but because of the error message I keep getting I can't check on them or update them. Any ideas will be greatly appreciated. Thanks!

Hello, I am running Mac os 10.6.8. It is shutting down without warning when I walk away from the computer for about 5 minutes. It happened twice. It was not asleep, i had to turn the computer back on...Any ideas...

Hello, I am running Mac os 10.6.8. It is shutting down without warning when I walk away from the computer for about 5 minutes. It happened twice. It was not asleep, i had to turn the computer back on...Any ideas...
G. Mendel

Crashes
The next time the problem happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos.

HT1222 I was trying to run ITunes 10.7 update on my Mac Pro with Retina display but the message appeared "An error has occurred" so I can proceed with the update. I dont' see any other messages. Any ideas what could go wrong?

I was trying to run ITunes 10.7 update on my Mac Pro with Retina dispaly but "An error has occurred" and I was not able to proceed with the update. The message says "The operation was cancelled. (3072)." I have no other messages. Any ideas why I cannot install this update

Scott's solution fixed the problem. It would have been helpful if the update message in the App Store had reported that. I had first tried B Noir's solution -- and received a helpful warning message that a guest user was still logged in to iTunes. I switched over, logged the guest user out, switched back and the update within the App store worked perfectly.
It seems to me that Apple should invest a little time and effort in making their error/warning messages easier to decipher. I have to come to the forum every time something happens. Why not simply have a dialogue window that opens up to explain the most likely issues?

PSE 9 reboots my machine without any warning message..

I am using Photoshop elements 9. i brought it recently. And the installation went
well.. but when i am using the software, my machine reboots without any warning message.
My System Configuration: INtel Pentium 2.19GH, 80GB Hard Disk and 2GB RAM. and operating system is XP.
Please help me in this regard.. what needs to be done...???

Hi,
Since nobody else is coming up with ideas for your problem, I'll let you know my thoughts.
As the system is suddenly rebooting, I tend to feel you might have a hardware problem. PSE 9 does use a lot of resource when it is working and could be causing the hardware to fail.
Just a few questions first:
1) how much free space on your disk drive?
2) does the system reboot when using any other software?
I have seen similar failures caused by overheating - sometimes a fan fails and needs replacing. Other causes could be a problem with the power supply unit - the extra processing load can sometimes cause the voltages to drop.
Since you said about the screen becomes blurry sometimes, it could be that there is a problem with the graphics card.
I'm not being rude, but how well are you with computers? If I were to ask you to check the event viewer, would you know what to do or would I have to give detailed instructions?
Brian

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

HT3529 My wife and I both have an iphone. We initially created it under her apple id. We will receive each others text messages from certain people not all. Any ideas why and what we can do to stop it

My wife and I both have an iphone. We initially set them up under one apple id account. When we text sometimes we will receive each others text messages from others. Example I will text a friend...she will not see my text but the reply comes to both of us. It seems to be random which ones. Any ideas how to correct this

Yup, get your own AppleID.
The messages that are being sent to both phones are technically not text, they are Apple's iMessage. They use the data part, not the texting part. So if you have an iPad or a Mac computer, you can send/receive the iMessages there too.
KOT

TS3697 I am receiving an error message(iTunes will no longer sync photos to the iPhone "Peter's iPhone". Do you want to keep or remove photos previously synced to your iPhone") I am trying to download pics from my computer to my iPhone. Any ideas? Peter

When I went to download some pics (originally taken with my iphone 4S) from my computer back to my iPhone I got the following error message: "iTunes will no longer sync photos to the iPhone "Peter's iPhone". Do you want to keep or remove photos previosly synced to your iPhone?"
Coincidentally, my wife just purchased an iPhone 4S and syncs to iTunes on the same computer.
Any ideas?
Peter

The "best" way to handle it, if you want to keep everything separate, is to create separate user accounts on the computer. make sure you log into your account on the computer before you attempt to sync your phone and log out when you're done using the computer.
Though it's possible to sync both of them to the same iTunes library, and even share an account for the iTunes store, you're inviting confusion and possible data loss (as you've discovered already). Best to just use separate user accounts on the computer. That also gives you the benefit of not polluting the other persons browser favorites, contacts, etc.

When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing." I can not access my Itunes library. Also, an "error 7 Windows error 126" appears as well. Any ideas?

When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!

Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates

I cannot get a dvd to play. The error message says "media type not supported". I think it is a .m2ts. Any idea on how I can get it to play?

I cannot get a dvd to play on my computer. The error message says in iDVD is "media type not supported".
The DVD was produced with a video camera and is in HD format. I think the the format is .m2ts?
Any ideas on how to get this to play?

Check out > Mac App Store - Free MTS M2TS Converter
and/or others at > playing .m2ts format in OS X - Google Search

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

Any Ideas - warning message

Similar Messages

Maybe you are looking for