Any Impact on Orders if we purge Quotes that are converted as Orders

Hi,
We are trying to analyze if there is any impact when we purge Quotes that has corresponding Orders created in Order Capture.
Please let us know if there will be any impact on Orders in OM and Install base for the corresponding purged quotes.
Regards,
Ram
Edited by: 874358 on Nov 10, 2011 6:19 AM

Hi,
Your delta will not be affected in Production since you have done Selection settings in IP and Filter settings in DTP.
In your course of activity, you have not touched the delta. So don't worry, but in Quality only Filter settings have been updated right? Hope IP has reverted back to the original status in Quality.
Regards,
Suman

Similar Messages

All of my devices seem to be connected... It's messages that I want to turn off. I don't want to receive any messages on anything except my daughters iPod that are sent to my Apple ID. How can I set my phone, iPod,iPad, and MacBook to no longer receive ms

All of my devices seem to be connected... It's messages that I want to turn off. I don't want to receive any messages on anything except my daughters iPod that are sent to my Apple ID. How can I set my phone, iPod,iPad, and MacBook to no longer receive msgs sent to [email protected]???? I only want msgs to be received on my phone, that are sent to my phone # and that is all!!!!

Settings>Messages>Send/Receive...edit here.

Any EASY, simple to use external hard drives that are PC and Mac interchangeable?

I have a new Mac Book Pro, running Mountain Lion. I am new to Mac; my old laptop is a Dell running Windows 7.
I would like to move over ALL my pictures and files from the Dell to an external hard drive (EHD) that is also Mac-compatible. I want all the pictures and documents SAVED and easily retrievable on the EHD, but probably don't really need *ALL* of them on the Mac.
Does anyone know of an EHD that will do this? One that is really super easy to use and won't need "reformatted". (I don't want to have to try to deal with that!)
I just want to put ALL my stuff from my Dell on an EHD, then move over SPECIFIC items from that EHD to my Mac.
Any advice? Recommendations? THANK YOU!

Bob,
I'm sorry, my message was unclear! No, I'm not looking to hook up two computers at one time to one EHD.
I'm just looking to be able to use one EHD, and go back and forth between it and the Mac or Dell, getting stuff off one, and putting stuff onto the other.
I have all my old Dell files and photos already on the EHD. I was afraid that once I formatted the EHD that those files from my Dell that were already there would somehow no longer be accessible to transfer to the Mac? But it sounds like this isn't so?
So, to clarify: I would like to continue to have access to the files on the EHD (from the Dell). Once I format the EHD, will those files still be accessible to me, to either leave "as is", or transfer to the Mac, now or later?
THANK YOU!

Any interest in a MS Word VB Macro that can convert Lookout L3 Objects (from 3.8) to New Objects

A coworker and myself have developed a macro that can assist in converting Lookout 3.8 files to the latest versions of Lookout. The script basically replaces the old "remote field connection" from the old expression-type value to an acceptable URL, and removes the L3 assignment in each of the object declarations. Once that's done, the user can simply delete all connections to drivers manually, recompile the .lks, and the result is a networkable process file. We've found it invaluable as it eliminates the need to manually (and tediously) replace all of the old L3 controls with New controls. I tried to paste it below, but exceeded the 5000 ch limit and I don't see an attachment options. Reply and we'll get it to you!
John T. Sampson

Please email to [email protected]
Thank you

There will be any impact on stock or purchase order or ....

Hi to all,
   1. Base unit of sub item is in bottle
   2. Issuing unit is in ltr.
   3. while doing mfbf for main item, for 0.010 ltr system is taking 1 btl.
   4. requirement from client is 0.010 botle.
   5. I customize it, requirement is met.
IMP 6. There will be any impact on stock or purchase order or any
thing because of this new decimal customization?
please give me your valuable feedback.
                                            Regards
                                            Samir
                                          pp Consultant

Dear,
It will not create any wrong impact in purchase requisition.
Even in PO itself you can give net price and quantity accordingly.
Regards,
R.Brahmankar

Is there any impact on database if we change the time of server?

Hi,
Our DB server time is 45 minutes ahead of our application server. We have planned to reset the time of database server. Is there any impact on database if we change the timing of the server?
Platform: Solaris
DB version: 10.2.0.2.0
$ bash
bash-3.00$ date
Thu Apr 23 20:26:19 IST 2009
bash-3.00$ sqlplus /nolog
SQL*Plus: Release 10.2.0.2.0 - Production on Thu Apr 23 20:27:15 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> conn /as sysdba
Connected.
SQL> select sysdate from dual;
SYSDATE
23-APR-09
SQL> select systimestamp from dual;
SYSTIMESTAMP
23-APR-09 08.27.53.250947 PM +05:30

That's an application question, not an Oracle question.
Oracle doesn't care what time it is or when the time changes. Your application(s), however, may care. If you use SYSDATE to populate a row and rely on the date later to be unique or to indicate the actual order rows were inserted, changing the date on the server, particular moving it backwards, might cause problems for your application. Does your application have problems running during daylight savings time changes?
Justin

Any questions on Order Management Header and Item level?

Hi,
If you are interviewing somebody...And the position he wants is SD consultant.
What kind of questions will you raise on OM header level and item level??
Order management--Questions on Header level
Questions on item level
Thanks, would be better if you could also attach the answer.
Thanks!!

Dear Hoo,
ORDER MANAGEMENT & SALES
1.Briefly describe the types and structure of the sales document and give examples of data
that you find on the different levels.
Sales*related business transactions are recorded in the system as sales documents. There are, broadly
speaking, four different groupings of sales documents:
Sales queries, such as inquiries and quotations
Sales orders
Outline agreements, such as contracts and scheduling agreements
Customer problems and complaints, such as free of charge deliveries and credit memo requests.
Header Data
The general data that is valid for the entire document is recorded in the document header. This data
includes the:
number of the sold*to party
number of the ship*to party and the payer
document currency and exchange rate
pricing elements for the entire document
delivery date and shipping point
Item Data
Whereas data in the document header applies to all items in the document, some data applies only to
specific items. This data is stored at item level and includes the:
material number
target quantity for outline agreements
number of the shipto party and the payer (an alternative shipto party or payer can be defined for a
particular item)
plant and storage location specifications
pricing elements for the individual items
Schedule Line Data
An item consists of one or more schedule lines. The schedule line contains all the data that is needed
for a delivery. For example, a customer orders 20 pieces of a material and you enter this as an item in
the sales order. However, you can only deliver 10 pieces now and the remaining 10 pieces next month.
In other words, you need to schedule two deliveries. The data for these deliveries (dates, confirmed
quantities) are stored in two separate schedule lines. In sales documents where delivery data is not
relevant *for example: contracts, credit and debit memo requests * the system does not create any
schedule lines.
Data recorded in the schedule lines includes the:
schedule line quantity
delivery date
confirmed quantity
2.What is the difference between an inquiry and quotation ?
. Inquiry: Request made to a vendor for a quotation for required materials or services.
No availability check is done for inquiry.
. Quotation: Offer from a vendor to a purchasing organization regarding the supply of materials
or performance of services subject to predefined terms and conditions.
A quotation consists of a number of items, in which the total quantity and delivery date of an
offered material or service are specified.
The total quantity can be subdivided into several partial quantities with different delivery dates in the
lines of a delivery schedule.
3.Do you always have to have a material master record number when you enter an item on a
sales document (inquiry and quote)? If not what would you have to use to be able to enter
information at item level?
No. Customer Material Information or Material Description.
4.If a customer doesn't place an order with you after you have sent him a quotation, what happens to
the quotation document?
Remains active till the end of validity period.
5.Can you have alternative items in a sales order?
Yes.
6.If you reference an inquiry when creating a quotation ,would the inquiry be updated?
Yes.
7.Can you copy one inquiry to many quotations ?
No.
8.Can you copy several previous documents into one sales order?
Yes.
9.Do you always have to copy the entire quantities at item level when you reference a
previous document?
No.
10.Can you make sure that business data in a sales order is only possible to maintain at header
level?
Yes.
11.From where is the delivering plant transferred into the sales order?
Customer Master, Material Master.
12.Which partner function is relevant for the delivering plant? The soldtoparty ,
billtoparty, payer, carrier or the ship* to* party?
Ship*to party.
13.Can you manually change the delivering plant in the sales order once it was defaulted from
the master data?
Yes.
14.For what or why do you use the incompletion log?
To have a complete document so that it doesnu2019t affect subsequent processes.
15.Can you have different incompletion logs for different item categories? Schedule line
categories?
Yes.
16.If a document is incomplete can you still save the document?
Yes.
17.Which reference status can a document have at item level? Which statuses at header level?
Item level: Partial, Full.
Header level: Full.
18.What's the advantage of using text as a reference instead of duplicating it?
Can be modified if needed.
19.What three sources provide data for the creation of a sales document?
Material Master, Customer Master, Previous referenced documents.
20.Can you change addresses of partners manually in the sales document?
Yes.
21.Name several input tools that make order entry faster and give a definition of them?
Customer Material Information, Product Proposal , Referencing Documents.
22.In which business environment would you use only the single*line entry screen to create
and save the order?
Telephone Sales, Simple Business.
23.If you do not specify the delivering plant in the sales order, what could the system then not
do?
Delivery Scheduling.
24.For what would you use the fast change function in sales entry?
Alternate Plants, Delivery or Billing Blocks
25.Name two ways to control that customers can receive only certain materials?
Material Listing, Exclusion.
26.What does the item category control?
General Data
. Should pricing be carried out for the item?
. When should an item be regarded as completed? A quotation item, for example, can only be
regarded as completed if the entire quantity has been copied into a sales order.
. Is it an item that refers to a material or is it a text item?
. Are schedule lines allowed for the item?
. May general business data, for example, the terms of payment at the item level, deviate from
those at the header level?
. Should a system message appear if the item cannot be fully delivered?
. Which fields are relevant for the incompletion log?
. Which partner functions are allowed at the item level and which are mandatory?
. Which output (for example, an order confirmation) is allowed for the business transaction and
which output determination procedure is used?
Shipping Data
. Is an item relevant for delivery?
. Should the weight and the volume of an item be determined?
Billing Data
. Is an item relevant for billing?
. Should the cost of the item be determined?
. Is it a statistical item? Pricing is carried out for statistical items. However, they are not added
to the value of the order, that is, the customer is not charged for them.
. Should a billing block be set automatically for an item? For example, this may be important for
items whose prices have to be clarified before billing
. Is it a returns item?
. Name the influencing factors for determining the item category in the sales document?
. Sales Document type, Item Category Group, Higher Level Item, Item Usage.
. Name the influencing factors for determining the scehdule line category in the sales document?
. Item Category, MRP Type.
. What does the sales document type control?
General Data
. Can the document be entered only with reference to a preceding document?
. Should the existing customer
. material info record be taken into consideration?
. Should the delivery date be proposed?
. Must a customer number be entered when creating a document? For example, product
proposals can be entered without reference to a particular customer.
. Which order probability is defined?
. Should the division be taken from the material master record for every item or should an
alternative division specified in the header take precedence over the item specifications?
. How should the system respond if the division entered in the header deviates from the division
in the items?
. Should a credit limit check be made?
. From which number range should the document number for internal or external number
assignment come?
. Which fields are relevant for the incompletion log? The validity period, for example, is
important for contracts and must therefore be specified in the document.
. Can an incomplete document be saved or must all data be complete?
. Which partner functions are allowed and which ones are mandatory?
Shipping Data
. Which delivery type should the delivery resulting from the order have?
. Should delivery scheduling be carried out?
. Should transportation scheduling be carried out?
. Should a delivery block be set automatically for a specific reason? For example, a delivery
block may be appropriate for a freeofcharge delivery.
. You can define shipping conditions for a sales document type. These are copied into the
document regardless of what is defined in the customer master record.
Billing Data
-->Which billing type should the invoice resulting from the order or the delivery have?
Should a billing block be set automatically for a specific reason? For example, a billing block may be
appropriate if a credit memo request should first be checked before it is used as the basis for a credit
memo.
-->Can the sales document type be determined by the system?
No.
-->In R/3, can you automatically substitute one product for another? How? What would you
have to create?
Yes. Product Selection / Material Determination.
-->Give a definition of replenishment lead time?
Total time for the inhouse production or for the external procurement of a product. In inhouse
production the replenishment lead time is determined to cover all BOM levels.
What's the difference between checking availability with or without replenishment lead time (RLT)?
With RLT : Availability check is done only upto end of RLT. If material is not available the date on
which RLT ends is displayed as Material Availability Date.
Without RLT : Availability check is unrestricted. Displays Delivery Dates as on which partial deliveries
can be made with available stock.
-->Name at least three item categories?
Standard Items : AFN, AGN, TAN.
Free of charge Items: AFNN, AGNN, TANN.
Non*stock Items : AFX, AGX, TAX.
Text Items : AFTX, AGTX, TATX.
-->Why would you use different item and schedule line categories?
Item categories are defined to provide additional control functions for the sales documents and thus
meet the demands resulting from the different business transactions.
The items in a sales document are divided into one or more schedule lines. These schedule lines differ
from each other with respect to date and quantity. For some schedule lines, material requirements
planning is not carried out; for other schedule lines, it is carried out. Also goods receipt, not goods
issue, is posted for a schedule line defined in a returns document.
-->Can you change existing standard item categories?
Yes.
-->Can you create new sales order types?
Yes.
-->Different dates will be calculated in order entry scheduling . Can you name the lead time
variables that will be taken into account?
Transportation lead time, Pick/pack time, Loading time, Transit time .
If you run out of stock in a specific plant can you check if there are quantities available in other plants?
Yes.
-->When you carry out availability check, which quantities or movements can the system take
into consideration?
The following elements can be included in the availability check:
Stocks : safety stock, stock in transfer, stock in quality inspection, blocked stock.
Inward and outward movements : purchase orders, purchase requisitions, planned orders, production
orders, reservations, dependent reservations, dependent requirements, sales requirements, delivery
requirements.
-->Give some examples of sales document types (description, not necessary the short code)
that already set up in the standard system?
Indicator used to control the processing of the various sales documents which are defined in the
system. E.g., OR, SO, BV, KR. Document types allow the system to process different kinds of business
transactions, such as standard orders and credit memo requests, in different ways.
-->Can you maintain texts for a specific customer and store them in the system? If yes, where?
Yes. Customer Material Information.
-->When the system checks availability which scheduling would it use first?
Backward Scheduling.
-->Name the influencing factors for the determination of the availability date?
The following data is required for determining this date:
Route from the shipping point to the ship*to party location
Shipping point from which the goods are issued
Loading group from the material master record
Weight group determined from the order using the order quantity.
-->Name the three delivery possibilities when there is not enough stock available?
One Time Delivery, Complete Delivery, Partial Deliveries.
-->Can you think of an example why you would have to create a text for a customer and copy it
to the sales order?
Customer specific instructions.
-->What is the function of item category group?
The item category group determines how a material is processed in the sales order. It defines, for
example, that pricing does not take place for a free of charge item, such as a business gift; or that
inventory management is not carried out for a service. When processing sales and distribution
documents, the system uses the item category group to determine the item category. The system
determines the item category based on the item category group of the material and the current
business transaction, and proposes it in the respective document.
When creating the material types non*stock material and services, DIEN is proposed in both cases for
the item category group, because the order processing for both material types is identical: for
example, pricing is carried out for both, but no availability check.
-->On sales order, when the system confirms 20 pieces to be available at a certain date, would
these 20 pieces still be available for other new sales order coming in later?
No.
-->What is a delivery group and why would you use it?
The complete delivery and delivery group functions enable you to combine some or all of the items in a
sales order so that they are delivered to the customer together. The system determines automatically
the latest delivery date possible for the delivery group and adjusts the schedule lines accordingly.
Corresponding requirements for material requirements planning (MRP) are changed or re*determined.
-->What is backorder processing?
The backorder processing functions enable you to list relevant sales documents for specific materials
and process them from the point of view of availability. You can assign available to promise (ATP)
stock to outstanding order quantities. In addition, you can withdraw already confirmed quantities and
reassign them to different items.
Backorder processing is only available for materials with individual requirements.
-->Can you link items in a sales order? If yes, when would you do that?
Yes. Promotional Items.
-->For what would you use BOMu2019S in sales? What two methods of BOM processing do you have
in sales order entry? How can you control if the system should/should not explode a BOM in
the sales order.
A bill of material (BOM) describes the different components that together create a product. A BOM for
a bicycle, for example, consists of all the parts that make up the bicycle: the frame, the saddle,
wheels, and so on. When you enter the material number of a bill of materials that is relevant for sales
order processing, the system displays the material that describes the whole bill of materials as a main
item. The components are displayed as sub*items.
Processing by Main Item : ERLA & Processing by Sub*Item : LUMF
BOM explosion can be prevented by specifying Item Category Group as NORM.
Credit limit checks is an example of a very close link between which two SAP modules?
SD & FI.
-->What are the two techniques in delivery scheduling?
Backward Scheduling & Forward Scheduling.
-->How does a third party deal work? Do you use a special sales order type for that? How could
the system know that you want to process a third party deal?
By specifying item category as TAS using double*line entry in the sales order.
No special order type is available.
By the item category group and/or material type in Material Master .
Name the several steps in consignment processing.
Consignment fillup, Consignment issue, Consignment pickup, Consignment return.
Whatu2019s the difference between consignment pick*up and consignment return?
In consignment pick*up, customer returns consignment stock. When goods issue is posted, the
relevant quantity is deducted from the customer's special stock and is added back to regular stock at
the plant where the goods are returned. Total valuated stock remains the same since the returned
stock was regarded as part of inventory even while it was at the customer's premises.This transaction
is not relevant for billing.
In consignment return, customer wishes to claim on consignment goods which have already been
issued. When goods issue is posted, the relevant quantity is added to the customer's special stock at
the plant where the goods are returned. Since the ownership of the goods is passed from the customer
back to the company, the transaction is relevant for billing. In this case, the customer receives a credit
memo for the returned goods.
-->Can you control that an end user cannot copy a quote of customer A to a sales order for
customer B? If yes, where?
Yes. By customizing Copying Control for header data.
Give some example for data that is copied from the customer (soldto, payer, shipto) to the sales
order as well as for data that is copied from the material?
General data, payment terms, shipping details, delivery agreements, delivering plant.
-->What is returnable packaging processing?
Returnable packaging consists of materials that are stored at the customer location but which remain
the property of the company. The customer is only required to pay for the returnable packaging if he
does not return it by a specified time.
Name the two outline agreements in R/3 standard and explain the difference between them.
Agreements are arrangements between business partners regarding the granting of conditions over a
specified time period. The agreement contains conditions which apply over a particular time period and
which are settled together at the same points in time. An agreement can be settled once or
periodically. The two outline agreements include Contracts and Scheduling Agreements.
Unlike a contract * which only contains an overall target quantity or value * a scheduling agreement
also contains specific order quantities and delivery dates.
-->How many documents do you create when you release, deliver and invoice the first order
from a contract?
Three : Sales order, Delivery note, Invoice.
-->What types of output can you have in sales?
Printer, Telex, Fax, Mail, EDI.
-->Can you automate output processing ? Do you always have to specify it manually?
yes. No.
-->Where would you specify which data should be copied (at header, item and schedule line
level)when you copy from one document to another one?
Customizing Copy Control.
I hope it will help you,
Regards,
Murali.

Region in the Plant - Any impact?

Hello Friends,
I'm almost certain about this, but I would like to confirm this so that i don't mess up with the system
The "Region" in the plant address was wrongly maintained few years ago as 11 instead of 01. If we change this to 01, will there be any impact on any module side?
From SD point of view, I knew it will have impact on the Tax condition records as this is one of the field in the access. But except this, I do not think there will be any impact on MM, FI and CO reporting side. Am I correct?
Any inputs?

Hi
As you already aware thet Region has very important role in determining the Tax, so changing it will sure create an issue.
However I feel that you can do that but must take some precautions, like :-
1. Close all the transactions which are in process (Like open Order, Open Deliver, Invoice)
2. Discuss withh other module so that they must also do the same for their open transaction.
3. Check with your client, as changing the Region will have an effect on Taxes and Auditor may ask the reason since the transactions which are already posted may have wrong tax and wrong region.
4. Maintain the Tax records with new region.
Thanks and regards,
Amitesh Anand

Confirm Production on any open production order

Hello Gurus.
Our company receives material at the end of the production line and they need to report this production in the system. The problem is that at this point, they don't know what Production Order it relates to.
Is there a transaction in SAP that allows you to report production and then apply this to any open production order that currently exists? For instance, apply it to the first open production order in the system.
Somewhere where all the user would need to type is the material and quantity. The production order would be selected automatically.
Thanks!

Thanks for your replies.
Regarding REM, I know how to set it up; however, we need to have Production Orders in place in order to drive the requirements of components.
With REM, how would you know which components you need to purchase? Would you need to then use Re-order point planning or fixed forecasts in order to purchase them in time?
It would be great if it was possible to use REM to receive the assemblies on stock, but instead of getting the results in a Product Cost collector, you would reduce open production orders. Though I understand this may not be standard functionality.

Is there a limit on number of object links to DIR, and any impacts of this

Hello All,
Can you please let us know if there is any limit on the No of Object links to be maintained in the Object Link tab of DIR,
Our major Concern comes as there is One DIR logo / symbol, which is maintained in most of the Material Master around 1000s
and also the same DIR is used in all the Service and maintenance Notification as an Attachment, so the list of Object link in DIR Object link tab is going beyond control above 10000s,
i wanted to know if there is any limit on no of Object links to be maintained in DIR object links, and is there any impact on DMS functionality if the list is ever increasing,
( also can i know if there is any workaround that the DIR is only displayed going in to Material master or Notifications but the same is not listed in the DIR object links tab as here it is going on increasing,)
Thanks and kind regards
Kumar S

Hello Christoph and Every one,
Thanks for the responses given, and providing a hint not to have many Object links, as it could be an performance issue going to the DMS DIR Object link TAB,
But in this particular case we are not assigning the Objectlinks going by the DMS Object links TAB, but it is done in other way round, going by the Equipment or Notification Screens,
There are few Health and safety document ( Which is created as a DIR in DMS) which needs to be assigned in Most of the Equipment and the new notifications created, and this document DIR is assigned from the Equipment and notification Screen,
And we may not be interested to go to the DIR to browse and Assign the Object Links, so as we do not frequently go and check the DIR or Use DIR Object link TAB for Object Link assignment will it in any ways cause performance Issue here??
And also as asked earlier can we have a one way attachment like the DIR is Visible in the Equipment or Notification Screen, but the DIR is not adding up the Equipment or Notification details in its Object links TAB, (by development or it is totally illogical to ask for)
Thanks and Kind regards
S Kumar

Upgrade SAP R/3 system is there any impact in BW3.5 system

Hi,
Client need to upgrade ECC5.0 to Ecc6.0.No changes in BW3.5 side.
Now is there any impact in BW.If impact what are all the impacts of your experiance.This is very urgent Could you please respond immediatly.
How to test the BW system.
Please do the needful for me...
Thanks to all
Vasu

Hi,
I would like to ask you to refer the note mentioned in the below Link;
Re: Hi Gurus..
With rgds,
Anil Kumar Sharma .P

Is there any impact that apply Oracle CPU on standby and primary DB

We plan to apply Oracle April CPU on standby DB at this weekend. Then apply the same patch on primary DB next weekend. If I apply the patch on standby, then enable redo apply between primary and standby, is there any impact on primary DB. Theoretically, I don't think so. However, both DBs are production. I want to make sure there is no any impact by applying CPU in different time. Otherwise, I have to apply both DBs at the same time. Please advise. Thanks in advance.

853153 wrote:
I hope you read other people's post carefully. Don't pretend yourself is expert so that you can say whatever you want to say. This is the tech forum for Oracle technical people to ask question, seek help and so on. How do you know I didn't review document 278641.1 before I asked my question. Document 278641.1 only provide info on how to apply patch on primary and standby. Didn't say anything about applying the same patch on both DBs with data Guard at the different time. I just want to make sure If I apply patch on both DBs with one week difference, will this affect my primary database? Is there anything wrong here. If you paly in this forum as expert, please help people, not just look down people.
I suggest you review [url http://www.catb.org/~esr/faqs/smart-questions.html]How To Ask Questions The Smart Way.
When you ask for help, state the platform, operating system, Oracle version and patch level, no matter whether it seems important to the question or not. It most often is important. You may not know the difference between Itanium and PA-RISC, but that is important for Oracle and important for someone doing administrative work on an Oracle database to know. You should also learn to search the internet for answers to common questions. Everyone here wants to help, but few want to spoon-feed.
When you have any kind of standby, that constrains what you can do to a primary, if you want the standby to work properly. You need to understand how things get from one to the other, and how to decide when to simply rebuild the standby from scratch - and that decision is based on your configuration and requirements. You don't want to be in some undefined configuration for any period of time.

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

Would there be any impact on MP functionality in a MUI enviornment

I am validating my MP on the latest version of System Center. Wanted to know if the OS has MUI enabled, would there be any impact on the MP functionality given that System Center strings are English only irrespective of the whatever the languages
is set using the MUI.

Hi, no impact on functionality
http://technet.microsoft.com/en-us/library/hh457558.aspx
http://msdn.microsoft.com/en-us/library/ee533664.aspx

Case with Magnets - any Impact on iPhone 5?

Hi@All!
I bought a Case with Magnets to close for my iPhone 5. Does it have any Impact?
Tranks for help in advance.
Klaus

no not at all
magnets if powerful enough pasive magnets are not powerful enough but strong electromagnets can damage magnetic storage such as a harddisk
but no ios devices use magnetic storage they use flash storage

Any Impact on Orders if we purge Quotes that are converted as Orders

Similar Messages

Maybe you are looking for