Anybody else currently experiencing extremely slow...

Anybody else currently experiencing extremely slow speeds and random disconnections?

a cable theft would be unlikely to affect you as it is fibre to cab the only copper is from the cab to your home or your copper voice circuit to the exchange
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.

Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.
Configuration is Admin server plus 28 JMS servers - no nodemanager - all on the same server.
When I bring up Admin console alone response is quick but bringing up JMS servers one by one will slow it down.
I did not experience this problem when this configuration was in Weblogic 9.
Memory configuration is -Xms4g, -Xmx4g.
Any ideas what else I should check ?
Thanks.

Hi,
Collect multiple thread dump at the interval of 10 sec and check what the threads are doing .
Thread dumps will give you some information about why there is a slowness .
Ways to collect thread dumps
Thread dumps & Ways to take thread dumps - weblogicexpert
Hope it helps

I can't upgrade to Yosemite but I fulfill all requirements. If I try to upgrade to Mavericks I am forwarded to Yosemite again. It is a close loop with no answers. Anybody else is experiencing the same with a MacBook Air 1,1?

I can't upgrade to Yosemite but I fulfill all requirements. If I try to upgrade to Mavericks I am forwarded to Yosemite again. It is a close loop with no answers. Anybody else is experiencing the same with a MacBook Air 1,1?

A MacBookAir1,1 can’t be upgraded past 10.7.5.
(115081)

Anyone experiencing extremely slow downloads from Apple?

For the past 48hrs or so I've been unable to stream or download HD Video from iTunes store or iCloud on any of my devices, Apple TV's or Computers.
Netflix, Amazon Prime, and other HD Streaming services unaffected. Internet up and running 45Mbps connection, working great. only thing affected is content from Apple, specifically content purchased and on iCloud. iCloud account fine, Apple ID account fine. Can access Apple.com, iTunes Store, Apple Store, Communities, and content, however, streaming, downloads extremely slow, almost unresponsive....
Is anyone aware of any slowdown issues, servers down, or other issues affecting access to content?
You know because Apple is always so forthcoming on these issues!
So far Ive found no mention of any issues in any of the communities....
Thank You.

Apparently Adobe is having server problems. Other users have reported problems today.
"The Digital Publishing Services Team is investigating reports of publishing failures. Teams are diligenty working on resolving the issue.", according to http://health.acrobat.com

Experiencing Extremely Slow Upload / Download Speeds AGAIN - Bradenton, FL

Experiencing very slow internet speeds for the last few days in Bradenton, FL area (4 Mbps / 4 Mbps). The exact same issue occurred approximately 2 months ago and took over two weeks to resolve. Turns out it was an area wide equipment problem that Verizon wouldn't address until they received a sufficient number of customer complaints. Very frustrating. Paying for sub-standard service. Looking to switch to Brighthouse in the New Year as this appears to be a never ending problem.

Here we are, 9 months later and I am AGAIN experiencing slow internet speeds. I am paying for fios speeds of up to 50/35 but am seeing 5/15 instead. This problem keeps recurring time and time again. Tech support refuses to do anything because I can get normal speeds to my nearest hub, but ANY hub beyond that is useless. When I do speed tests using other methods, I show slow speeds. I was on the phone with tech support for 2 hours only to be told that all the network technicians and gone home.
This problem crops up every so often. Tech support will not address the issue until a sufficient number of customers call in to complain. Each time the problem is finally solved weeks later and was due to some sort of equipment failure on Verizon's end.
Speedtest.net testing out of Ft. Myers is giving me 5.84 Mbps down and 14.87 Mbps up.
Speakeasy.net testing out of Atlanta is giving me 11.45 Mbps down and 23.54 Mbps up.
In the past I my router has been replaced and I have been told that the problem is with all of my computers. Hmmmm... I pay over $200 per month for fios service which includes tv and digital phone. I recently renewed my contract for 2 years thinking that this problem would not come back but it has for the THIRD time in one year. I have a 30 day money back guarantee with no penalty if I cancel my contract. At this point, I am so frustrated that I will be calling Verizon to cancel my service effective the end of the month.

Is anyone else experiencing extremely slow shutdown with FCPX?

Working on a project normally, and I get spinning beachballs and slowdowns sometimes, but the real killer is when i hit command-Q. It takes 15 minutes for the program to shutdown. Most of the time it eventually will, but it seems totally frozen. No processing, not accessing HD's, etc..
Further, i dont exactly have time to wait 15 minutes to restart my computer because its a solution i've found to keep the program running ok. So, i force quit sometimes, I'm sure doing that isn't exactly healthy for my project files.
Has anyone experienced this? Any solutions? I searched for this but couldn't find it anywhere else..

Also experiencing hang on quit. For me, it follows a bug where the main viewer pane quits working (which happens occasionally when I have the gall to try to play something before it's done rendering.) Main viewer pane won't update--just shows a video frozen video frame, won't even preview items in the event browser pane. Everything else appears to be working until I play, and when the playhead gets to the unrendered segment, FCP hangs--I assume it's the same hang that happens if I try to quit instead of playing, though that's a pure guess.
iMac 2.93GHz Core i7, 8GB RAM, OSX 10.6.8

Any users in Melbourne been experiencing extremely slow or irregular downloads of movies?

2nd Gen Apple TV, Airport network with full strength wireless signal. ISP cable speeds good.
But in past few days movies have been slow to download or been interrupted as it downloads and catches up.
My side of things are at speed or above, anything going on? We gave up watching a movie tonight after trying to start it at least a dozen times in both HD AND SD.

I haven't been able to try a wired connection yet. I'm planning on getting the internet wired in this coming week. My internet connection isn't "slow", though- I'm able to browse the internet just fine. Whenever I attempt to download a movie or an update (or something through itunes or apple) the download rate will go up (10-13 mb/sec) but then over a period of time (sometimes seconds, sometimes half an hour or so) it will fall lower and lower, eventually getting so low that the connection is dropped. I've been attempting to update my iPhone to iOS 5 for the past two days.
My download timer currently says (28.5 kb/sec) 82 hours remaining
This isn't limited to huge software updates, though - as movies and music are just as bad.

I'm experiencing extremely slow response when attempting to open the control center from the lock screen, any suggestions?

When trying to access the control center from the lock screen, it takes anywhere from 2 to MANY swipes to get a response. Never opens on the first try.

I'm not having the same problem, but there is a feature in the OS that attempts to discern from swipes to unlock and swipes to open control center. This is what you may be experiencing.

Experiencing extremely slow pdf printing on new HP 8625 officejet -

Getting very slow printing of pdf's. Tried setting in Advanced tab to let printer select color. This did not help. Using latest version of Adobe Reader and latest printer driver from HP. Anyone have suggestions? HP was no help in an hour chat. They blame it on Adobe. Makes no sense since my 9 year old HP Officejet had no such issue.

Any chance someone on "Staff" might address this question?

HT4809 Has anybody else been experiencing mass USB keyboard death?

In the last month alone, 9 USB wired aluminium type Apple keyboards under 18 months old have had one or more keys sticking or stop working from a user base of 40 users i.e. almost a 25% failure rate.
The majority of these keyboards are already replacements for previous keyboard deaths of the same model and many have only been in service for 2 or 3 months before they die but sitting shrink wrapped in storage (cool, dry place) for 6 months or more before that, so warranties are questionable at best.
These numbers exclude obvious keyboard deaths such as coffee spilliage. Generally users come in in the morning or back from lunch and suddenly their keyboard has stopped working either with keys being stuck or just parts of the keyboard dying e.g. no numbers or random keys such as "a" and "d" stop working. This can happen while a machine is running or on a fresh boot after a clean shutdown.
Standard troubleshooting - change usb port, reboot machine, check the user has not turned on anything funny via system preferences all turn up no results. The onscreen keyboard does not clock the dead keys as being pressed but replacing the keyboard fixes the problem every time.
Keyboard death is not OS specific as we are running OSX 10.6, 10.7 and 10.8 and keyboard death shows no specific swing to a certain OS. Plugging a dead keyboard into a Mac running a different flavour of OSX still shows the same symptoms as on the machine where the problem began.
The usage is standard web browsing, email and document editing in an air conditioned office environment. We have a mixture of people ranging from those who still type with one finger to people who touch type at high speed but this does not seem to affect the life of the keyboard at all.
These keyboards are a mixture of US layout and Japanese layout keyboards.

Keyboards are a low power device. Go to the system profiler to determine the power of the various port buses. Plug the keyboard into the USB port that is not low power.
Either that, or replace the USB cable, or add a USB hub that has wall power from outside the computer.

Slow screen scrolling in Log8 arrange--anybody else?

If I click and drag to move the side scroll bar up or down there is almost a half-second lag before anything moves on the screen. Right and left as well. It does it with a session I'd been working on a while, as well as my empty autoload.
Went to the same song I had prepared in Logic 7, and in Log7 the bar acts like its supposed to, like it's glued to the cursor, very responsive. So I don't think it's a basic video problem with my computer.
I'm on a G5 with 5.5 gig of RAM. Curious if anybody else is experiencing this. I thought Log8 was supposed to be smoother.

There is already more than one thread on this issue.It appears to be a PPC issue regardless of graphics card performance.Intel users are happy with their graphic response......I'm back on Logic 7 until Apple fixes it......the hand/eye delay is really frustating and slowing me down.
Read more here http://discussions.apple.com/thread.jspa?messageID=5381497&#5444891
Tell Apple about it http://www.apple.com/feedback/logicpro.html

Has anybody else noticed a 10-25% openGL slow down with 10.7.5?

Hi, I was running x-plane 9.70 at certain settings on my 17" MBP (early 2011, 10.7.3) and noticed I was getting about 70 fps... nice. I do an update on firmware and OS (10.7.5) and I notice that the x-plane fps has dropped to about 55. The settings and environment the same as near as I can get. I thought this was bad but maybe just x-plane or something peculiar. I also couldn't tell if the performance drop was caused by the firmware update or the OS update.
I remembered I'd done an xbench benchmark with 10.7.3 so I did a new one with the updates... sure enough the openGL numbers had dropped by 20% or so. So, I hooked up my backup drive with 10.7.3 on it and ran x-plane and xbench again to try to isolate the firmware update from the OS update.... The results were x-plane still showed a drop of about 10% and xbench about 25%. Looks like there is something wrong in 10.7.5.
Has anybody else noticed a performance slow down in openGL functions with 10.7.5?
Khan

Thank you for this first reply! I'll have to give this a try later....the main laptop I experience this on crashed not more than an hour after I posted this issue. I'm on a tiny, slow netbook that hasn't had the same problem. Now I'm wondering if I picked up a Trojan on the main laptop and the "Not Responding" message is a side effect of a virus or Trojan.
One of the system .dll files has been corrupted and I'm not being allowed to use recovery discs, previous disc images, or any recovery options. That was an all day sucker yesterday and from what I've read on forums and have researched, it appears I'm going to need to reload the operating system. If it is indeed a Trojan/virus, I'm surprised it made it through my antivirus and firewall. Anything is possible, really.
Thanks again, I'll get back with results once I get the wounded laptop back up and running.

Illustrator 15.0.2 extremely slow on Windows 7 Home Premium 64-bit

Illustrator has been working nicely on my computer up until the 15.0.2 upgrade. Now it chugs along at a snails pace and locks up/hangs frequently when switch between tools or windows.
My system specs are:
Windows 7 Home Premium 64-bit
Intel i7 Q720 processor
6GB RAM
1GB ATI video card
Is anybody else experiencing extremely slow performance with the 15.0.2 upgrade?

I am having a suspisciously similar issue and I would like to elaborate a bit..
I too have this odd issue where Illustrator works ok (though screen redraw lags) but as soon as I go between programs, whether Notepad, Acrobat or similar simple programs - Illustrator freezes for 5-10 seconds. I go back and forth a lot - looking through documents (pdfs etc.) when I draw so the annoyance is simply unbearable.
I have used Illustrator for ages and roughly 6 months ago I bought a new PC to use at home. Its specs are:
OS: Windows 7 Pro 64 bit
PROC: Intel i7 930
RAM: 12 GB OCZ PLATINUM
GFX: ATI RADEON HD 5870
MOBO: P6X58D
These specs thrashes my specs at work by far and yet Illustrator BOTH CS4 and CS5 runs smooth and hazle free at the old worn out computer at work, while being close to useless at home. I have googled my eyes out and found no solution. Tried clearing the prefs, etc. - which made no difference. Disabled Aero and all other gfx consuming stuff - with absolutelu no improvement. I have even tried flagging Illustrator CS5 as Large Adress Aware... didn't help
I can run all other Adobe CS4 and CS5 (master edition) very good!
Can someone help - I am desperat

Extremely slow performance on projects under version control using RoboHelp 11, PushOk, Tortoise SVN repository

We are also experiencing extremely slow performance for RoboHelp projects under version control. We are using RoboHelp 11, PushOk and a Tortoise SVN repository on a Linux server. We are using a Linux server on our IT guys advice because we found SVN version control under Windows was unstable.
When placing a Robohelp project under version control, and yes the project is on my local machine, it can take up to two hours to complete. We are using the RoboHelp sample projects to test.
We have tried to put the project under version control from Robohelp, and also tried first putting the project under version control from Tortoise SVN, and then trying to open the project from version control in Robohelp. In both cases, the project takes a ridiculous amount of time to open. The Robohelp status bar displays Querying Version Control Status for about an hour before it starts to download from the repository, which then takes more than an hour to complete. In many cases Robohelp becomes unresponsive and we have to start the whole process again.
If adding the project to source control completes successfully, and the the project is opened from version control, performing any function also takes a very long time, such as creating a topic. When I generated a printed documentation layout it took an astonishing 218 minutes and 17 seconds to complete. Interestingly, when I generated the printed documentation layout again, it took 1 min and 34 seconds. However when I closed the project, opened from version control, and tried to generate a printed documentation layout, it again took several hours to complete. The IT guys are at a loss, and say it is not a network issue and I am starting to agree that this is a RoboHelp issue.
I see there are a few other discussions here related to this kind of poor performance, none of which seem to been answered satisfactorily. For example:
Why does it take so long when adding a new topic in RH10 with PushOK SVN
Does anybody have any ideas on what we can do or what we can investigate? I know that there are options for version control, but am reluctant to pursue them until I am satisfied that our current issues cannot be resolved.
Thanks Mark

Do other applications work fine with the source control repository? The reason I'm asking is because you must first rule out that there are external factors causing this behaviour. It seems that your it guys have already looked at it, but it's better to be safe than sorry.
I have used both VSS and TFS and I haven't encountered such a performance issue. I would suggest filing it as a bug if you rule out that the problem is not related to external influences: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Kind regards,
Willam

CS5 Extremely Slow to Open, Save and Print

We have recently installed InDesign CS5. We are experiencing extreme slowness when open, saving and printing documents. We have installed on Windows XP Service Pack 3. I have upgrade to 7.0.3 to no avail. Has anyone else experienced this? If so, were you able to resolve it?

pooh071567 wrote:
I can create and save new CS5 files fine both to the desktop and the network. I tried copying our existing files to the desktop to see if there was a network issue. It is also extremely slow to open from the desktop. I'm beginning to wonder if it is our documents. They were created in CS3. I tested one that was 2 pages of text with a few graphics. It took a considerable amout of time to open. I made some edits to it and saved it to the desktop. I would have thought that saving it in the new CS5 format would have improved the slowness. It did not.
I was on a support call with Adobe yesterday for 2 1/2 hours. To say it was extremely frustrating is an understatement. They have asked me to re-download the install, uninstall and reinstall. I did not re-download, but did uninstall and reinstall from the EXE we have. Slowness is still an issue. I'm inquiring regarding our antivirus, however, I don't think that is the issue. We were able to open files in CS3 just fine. It seems to be since the upgrade to CS5 that we are having issues.
Whenever you contact anybody's tech support:
* Get the name of the tech, and any other identifying info
* Get a case number
* Explain your question/problem briefly; begin by saying, "I'm going to explain my problem briefly. Before we spend lots of time on it, I'll ask you if you have expertise in this particular area. I don't mean to be rude, but if you don't have sufficient expertise here, we'll both waste our time. If this isn't OK with you, I understand; we all have strong and less-strong areas. If you don't have the expertise, please give me the name of someone who has the the greatest amount of the expertise needed to solve the problem, and then transfer me to that person. If you can't do this, please give me your supervisor or manager's name, and transfer me to that person. Would you like me to state my problem briefly, now, so that we can go ahead?"
* If you have the slightest inkling that you're being told to do wasteful things like re-download, uninstall and reinstall, ask the tech, "Is this a known fix for my problem? If it's not, why are you asking me to do this?" (Some techs suggest these steps to get you off the line and move on to another call, either because their call clearance rate is slipping, and that's how many are paid. Others suggest them because they don't have the expertise to solve the problem.)
* If you're transferred to a manager or supervisor, summarize why you asked for him or her. Then, ask the manager to transfer you to the highest-skilled person for the problem you'll now explain briefly. If the manager/supervisor balks, ask for the highest-level person in the department, or the division. IOW, ESCALATE (use that word, when asking to change people.)
It's not the customer's job to teach customer service folks to serve customers, but we're the best ones to teach them now NOT to do it.
Now, if you don't have the expertise to do these things, please give me the name of your superior, so I can escalate this matter, and then connect me to that person!
Seriously,
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Anybody else currently experiencing extremely slow...

Similar Messages

Maybe you are looking for