Has anybody seen this error - Itunes

When i click on any of these tabs Books, Movies, App Store, TV Shows, Music i get the following error.
This is started happening from today.

Forgot to insert the image, here it is.

Similar Messages

Illegal Load factor 0.0 -- Has anybody seen this?

Hi
I am getting this weird error once in a while.
java.lang.IllegalArgumentException: Illegal load factor: 0.0
     at java.util.HashMap.<init>(Unknown Source)
     at java.util.LinkedHashMap.<init>(Unknown Source)
     at java.util.HashSet.<init>(Unknown Source)
     at java.util.LinkedHashSet.<init>(Unknown Source)
THis is caused by a call to something as simple as:
Set<IAgent> result = new LinkedHashSet<IAgent>();
Has anybody seen this error before?
I sometimes also get this error while compiling my code inside Eclipse.
I am afraid this could be a hardware related problems since I only see this error while running on my machine with an AMD 4800, windowsXP pro sp 2, sun jdk 1.5.0_06.
It is not persistent. It only happens once in a while.
Any suggestions of what could be the source of the problem?
Marcel

if you are saying eclipse is throwing the error, then somewhere in eclipse they have passed 0.0 as the second argument to the HashMap constructor,
HashMap(int initialCapacity, float loadFactor)and you should post this as a bug here:
https://bugs.eclipse.org/bugs/
If it is your code that is doing it, don't do that.

Has Anybody seen this VPC error on the 5k?

Ok, my VPC is up and working for all my devices except my connection to the uplink switch. It is a sinle 3750 with port channles consisting of 4 interfaces. It is connected to two 5010s. I show the following error when I show VPC
"vpc port channel mis-config due to vpc links in the 2 switches connected to differnt partners"
Google does not have much on this error and this is the first time I have seen this. Any idea on what might casue this?
Thanks for any help.

Hi Justin,
I have not specifically come across this error before, but it seems to suggest that both your vpc peer devices do not recognise the 3750 as a single switch, but two separate entities, thus perceive the links as separate. Is the 3750 a stack of switches where you have distributed the etherchannel uplinks across seperate switches in the stack, commonly referred to as cross-stack Etherchannel?
Ensure that all four uplinks on the 3750s are configured within the same port-channel group using LACP (mode active), similarly that the N5K uplinks are configured or associated with the same port-channel and vpc identifier. Could you post the configuration of your uplink from the 3750(s), and N5K uplinks to the 3750 and peer-link and keep-alive link.
If you do a show interface trunk on the N5K, do any vlans show not forwarding and that are err-disabled, this suggest that the incorrect VLANs are not consistent across the uplinks.
Hope this helps.
Allan.

Has anyone seen this error when trying to Save As...

In Acrobat X, after revising hundreds of links, I go to Save As... If I choose PDF... I get this warning instead of saving... "This document could not be saved. There was a problem reading this document (14)." I have not tried all of the Save As options but the Save As - Reduced Size PDF... produces another error without saving.
Has anyone else seen this?
I have figured out a work around - but it's still annoying....
(Here's the workaround BTW)
First of all the SAVE works so you can save the work you've done.
In Bridge or Explorer make a duplicate of the file. Rename the file to what you want. Go in an make further revisions particular to that copy, Save and close. Now you have your Saved As...file.

I should add that the pdf in question has a lot of interdocument links/buttons and a lot of links going to another pdf document. Both files are kept in the same folder.
I'll try to answer any other clarifying questions.

Anybody seen this error message?

I recently replaced the internal HD on my G4 Quicksilver tower and get this error message when I dock my iPod (40GB with click wheel):
"The system extension /System/Library/Extensions/iPodDriver.kext/Contents/Plugins/iPodFireWireTranspo rtSupport.kext was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update."
Things I've tried:
1.) Updated iPod software and iTunes.
2.) Deleted the extension from the Library. I dragged it to the trash, but it didn't actually delete. The next time I fired up iTunes I didn't get the error message, but I have ever since.
This error is more of an annoyance and doesn't seem to affect the docking process and the transfer of music from iTunes to my iPod.
But still.
Anybody have a similar problem and a solution. Thanks in advance

You should certainly be alarmed. Well, sorta actually this might prevent you from making any changes, but other than that you should be fine, but fix it. Is there a dump file created? Are there any other processes going down?
david

Has anyone seen this error opening MS Office applications?

Yesterday I went to open MS Word 2008 on my Macbook Pro (now running Lion OS) and received an unusual error which I have not seen before. Word had been opening and working fine on previous days since my lion install so I do not think it is compatibility issue, but the description of the error has me more worried about potential hacking via Wifi.... maybe I'm paranoid but I'd appreciate some advice.
" Microsoft Office 2008 for Mac HSE cannot start because Microsoft Office is already in Use
An office program is being used by Rodolfo. Your installation exceeds the number of installations permitted by the license agreement. Click More Information to go online to learn about Microsoft Office licensing. "
I have only one installation, so my first question is, does anyone know what causes this error and my second... does anyone know who or how the name Rodolfo may have been displayed in this error message?
Strangely, although I had tried restarting Word several times in the same location I was receiving the same error, but when I went home that evening I opened it fine. Today I have returned to the same cafe to use wifi and Word has opened without errors.
Please forgive my ignorance but I would love some advice from someone who can shed light on this?

Please post Office related questions on the Microsoft Mac forums, as Apple Communities only provide support for Apple products: http://www.officeformac.com/productforums

Has anyone seen this error "window.cpp line 11518"

I have this error in my application and I am not printing or using an event structure. Apparently this error code has been found with printing front panels or using an event structure. I am using a case structure and all other cases are working properly. Once I get to this case labview displays this error and crashes. I deleted the case and the case structure and rebuilt it but I am still seeing the same problem. In this case there are two subvi's when the second subvi is executed this error is present when the second subvi is in highlighted execution the error is not present. If anyone has any suggestions please let me know. Thanks.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

After troubleshooting this problem more, I found that in the second subvi under vi properties, show front panel and close after if originally closed were not checked. Once checking both of these options the error did not occur anymore. Also this error was not present when the subvi was open in the background.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

Has anyone seen this error?

Hi,
I got this error when I openned DS SP03 today
http://img87.imageshack.us/img87/5266/errordsni8.jpg
Thanks in advance
Cherrs,
Reynod

Reynod-
A couple of things you could try:
1. Close the view which has the error - in your case it is the Composite Applications view. Close any other views which have an error. Then to re-initialise your CAF perspective by going to Window -> Reset Perspective. You have to be in the CAF perspective when you do the restore.
2. If (1) does not work maybe you should re-install NWDS.
Cheers-
Atul

Has anyone seen this error message: "Disc burner or software not found"?

Two weeks ago I successfully burnt a CD of Word files. Yesterday I put in a blank DVD and got a formatting error message. I didn't think too much of it (thought I had bad discs).
Tonight I tried to burn a CD out of iTunes. I got this error message: "Disc burner or software not found"
I suspect this is not good.
Can anyone help? Details on the DVD drive below.
Thanks a lot.
Will D
MATSHITA DVD-R UJ-857:
Firmware Revision: HBE4
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
MB 1.83, 2G RAM Mac OS X (10.4.8)

Thanks for the post.
No moving or renaming files, except for I deleted a file related to Adobe Acrobat to remove a toolbar thing. But nothing other than that.
Are there specific files I should be looking out for?
Thanks again.

TS3694 Has anybody had this error message: "the iphone could not be restored. an unknown error occurred (1015) ???

the iphone could not be restored an unknown error occurred 1015

Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Has anybody seen this??

My Samsung Continuum was stuck on a blank home screen and after 2 hrs I finally turned it off. I turned the phone on and the first screen that popped up is a little triangle picture of the Android robot sweeping and it says "Downloading... do not turn off target!!!". I have never seen this screen in the 2 yrs I have had the phone. My wifi and data are both turned off so I'm not sure how it would be downloading anyway. I have not tried to turn it off again, for obvious reasons, but I need my phone.

Hello michaels1mom! Great question. I have to admit that I haven't seen that happen before, but I can certainly understand why such a thing would concern you. Normally, alerts like that are the result of self-initiated software updates. It sounds to me as if that's the case. If I'm right, then you should be able to use the device again normally. Please reach out if you need any other assistance!
Dion M.
VZW Support
Follow us on Twitter www.twitter.com/vzwsupport

Has anyone seen this error message before?

Hi
We have a server running Windows 2008 R2 which we have built as a demo environment for P6 R8.3 EPPM. It was upgraded to R8.3 SP1 late last year, and has just been sitting idling in between being used for product demonstrations.
Recently I decided to let Windows Update apply a bunch of patches to the OS and the SQL Server instance running on the box - today when a colleague and I logged in to EPPM we kept getting a popup window every 10 seconds or so in front of the main portlet windows, headed "message from webpage", with the message
Logged messages:
message='unable to initialize AdfAgent' level=SEVERE error=message;'AdfIE8Agent' is undefined description:'AdfIE8Agent' is undefined number:-2146823279 name:TypeError at hh:mm:ss
This happens if we access the application using IE; it does not happen if we use Chrome - can anyone offer any suggestions what might be causing it? There is nothing related to AdfAgent or AdfIE8Agent in the Oracle KB at the moment

Sachin
On the server where P6 + WebLogic are installed, it's IE 11
On my client PC, it's IE 11 as well
I am pretty sure that that the problem has only started since IE11 appeared, but that may be wishful thinking. I have tried clearing everything from the browser cache, with no difference in behaviour. I have also tried setting the emulation mode to IE8 but that didn't seem to make a difference either.
I have restarted the P6 web app several times, and cannot see any errors in the WebAccessLog.html except for a occasional minor one related to Struts - certainly nothing that seems related to ADF directly.
Whatever the issue is, Chrome is not affected, and I have now installed it on the server as well where it is working fine.

Has anybody seen this issue?

Hey guys, I've searched along the forum and seen many helpful hints and tips so thanks to all the guys whose ideas I have used and not thanked them for.
Anyway down to business;
My internet, for the most part, is very good. It's 802.11n, I'm using a new airport extreme with a Mac Pro 2.66 and all the kit except the router, (DG834), is Apple. All software updates are applied, and the network is using all the necessary security settings, I have tried it on both b and g and it makes no difference.
Right so every now and then Safari may drop and tell me I'm not connected to the internet. I can click the Airport Icon in the menu bar and can see theat Airport is alternating about once per second between 'On' and 'Scanning'.
Is it time for a visit to the Apple Store?

Right, I'll reply to myself on this one. Been to the Apple store and looked at couple of the iMAcs they have there. They exhibit exactly the same behaviour, if with not quite the same frequency as mine.
I therefore ignored this. After that I came home and removed and them re-applied all the settings from my base station and all of a sudden the Airport speed is back!

Has anyone seen this error during installation ? (HELP!!)

The error is the following:
adicom30.ins(267):OS_error while getting the version of
Attempting to install to Windows 2000 workstation. Any help is greatly appriciated.
Thanks,
Lee

Try installing as Administrator. This may be due to privileges.

HAS ANYBODY SEEN THIS PROBLEM

I have posted this twice under two other threads but nobody has an answer. Surely there is somebody from Adobe that looks at these things.
I have taken a Adobe Reader 9.3.0 msi file along with the other 5 files from a fresh install and ran msiexec /a AcroRead.msi /p AdbeRdrUpd932_all_incr.msp. Everything ran perfect. I then installed the new package that was created through a GPO. No problems.
When I go to Edit>Preferences>Trust Manager>Settings all the settings on that form are grayed out. I also notice that when I open any pdf file and click on a link in that file it blocks the link even if it is another pdf file. There is no option to Allow or open or save or anything just a message saying your blocked and a link to a trust manager help file. 9.30 doesn't do that 9.3.1 doesn't do that but 9.3.2 does.
I have tried installing from Adobe's web site and then downloading the 9.3.2 msp file and running it. That works but incoporating 9.3.2 into 9.3.0 so I can push it out through Active Directory does not work.
I have worked on this problem for days and tried everything I can think of and can not get this to work. Surely someone else has this problem. or somebody know how to fix it. I am desperate Please Help!!!

Hi,
Sorry to bump this post but I seem to be having a similar problem with the latest 9.3.4 release. However I am using the MSI from the FTP site mentioned above.
I download the 9.3.0 MSI, then apply the MSPs for 9.3.1, 9.3.2, 9.3.3 and 9.3.4 using:
msiexec /p file.msp /a file.msi
The resulting install has the options in Trust Maganer grayed out.
Has anyone else had this problem with the latest version?
Thanks
Gareth
Hestia Solar

Has anybody seen this error - Itunes

Similar Messages

Maybe you are looking for