Anyone experienced random changes to CRM data?

Hi
Anyone experienced random changes to CRM data? Like Customer Type field losing the info (going blank) or any other fields?
Thanks
Casper

In regards to your Calendar items, how many calendars do you have setup on your device?

Similar Messages

Has anyone experienced random wake/sleep cycles? (NOT random shut down)

I bought my macbook on August 1, 2006, and previously had a problem with my it randomly shutting down. I had that fixed in December. Now I'm having the opposite problem, essentially. Whenever I put my computer to sleep, it wakes itself up, waits a few seconds, puts itself back to sleep, waits a few more seconds, wakes itself up... a constant annoying cycle. It doesn't matter if I put it to sleep by closing the lid or by choosing "sleep" from the apple menu, it still does this. I thought that perhaps one of my applications was causing my macbook to wake itself up, but this happens even when no applications are in use and I'm completely disconnected from the internet. This is driving me CRAZY because the noise of it waking itself up keeps me awake, and having to close out of all of my applications and shut down every night or whenever I want to transport it is terribly bothersome. Plus... the fact that it is waking itself from sleep can't be positive! Does anyone have any advice? I'm going to take it into the mac store but I'm super busy and wanted to see if anyone had any suggestions until then.
Thanks!
macbook Mac OS X (10.4.8)

I started having an almost identical problem. I would put the computer to sleep the screen would go black and seem to shutdown for a couple of seconds. Then the CD drive would make it's noise and the computer would wake up. I reproduced it with a clean install of OSX. If I had a password set on the computer and did not enter the password the computer would go to back to sleep and then repeat the process again and again.
The first day it happened I could reproduce it every time. Now it's not so constant. I need to get the CPU to around 140 degrees Fahrenheit for a few minutes and then put the computer to sleep by typing command-option-eject.
I suspect that there is a faulty cable or sensor. Conincidentally when the problem ocurred my bluetooth also seemed to "disappear" the computer could not detect the bluetooth module. That leads me to believe that there might be two cables one that is a case-open-close sensor and a bluetooth cable sensor and that they are getting pinched.
-Adam

Has anyone experienced a activity actual start date moving when updating progress

When updating an activity progress in a small schedule i notice that one of my activities which had already started on march 19th and was about 10% complete from a prior update jumped to March 23rd as start date. What is going on???

Could the activity be a Level of Effort or a WBS Summary? If so, it will follow any change to the earliest starting activity, if you made a change to this activity.

Changes in extension data not always sent to CRM Backend

Hi,
In a CRM 5.0 ISA b2b scenario we run into a problem:
<b>Short description:</b>
Changes in extension data on basket item level are only sent to the backend if there are additional changes to that item (for example a change in quantity).
<b>Long description:</b>
We have added an extension field on basket item level and use the standard extension mechanism to exchange this data to the CRM backend. In order to do this we have done the following:
- On the Java side we implemented MaintainBasketDispatcherAction and ShowBasketAction. The overridden methods are parseRequest() (from MaintainBasketDispatcherAction) and isaPerform() (from ShowBasketAction).
- In the backend we implemented the BADI CRM_ISA_BASKET_ITEMS and implemented the methods CHANGEITEMS_SET_DATA, CLEAR, GETITEMS_GET_DATA and SAVE.
We experience a problem when creating an order: When the only thing that changes in an item is our custom field, this is not noticed by the webshop as a change in the item. Therefore the method CHANGEITEMS_SET_DATA isn't called and the extension data isn't updated. If we change another field of an item, for example the quantity, the change is picked up and the method CHANGEITEMS_SET_DATA is being called.
It seems that somewhere an optimization is taking place where the Webshop decides that unchanged lines should not be sent to the backend. I can't find a way to tell the webshop that the lines are modified (i.e. are dirty).
Has anyone experienced similar behaviour or does anyone know of a solution?
Thanks in advance.
Wilco Menge
Java snippet:
parseRequest():
ItemList itemList = preOrderSalesDocument.getItems();
String extensionData = "";
if (itemList!=null && itemList.size()>0)
     for (int i=0;i<itemList.size();i++)
          if (itemList.get(i)!=null);
               extensionData = parser.getParameter("z_extension_data").getValue().getString();
               itemList.get(i).addExtensionData("ZEXTENSION", extensionData);

Hi Pranay,
I need to add a new field to the ISA item sales order in B2B webshop.
I'm trying to use the extension field in the ISA basket item.
I have added a new field in the WEB sales order at item level.
My collegues have changed and implemented the addExtensionData method of the ItemSalesDoc JAVA class.
Moreover I have implemented CRM_ISA_BASKET_ITEMS (BAdI CHANGEITEMS_BEFORE_ORDER) in the backend system.
In the BAdI CHANGEITEMS_BEFORE_ORDER I have copied the extensions data values to the CT_SALES table. Specifically, I have tried to update and change the SUBMISSION field.
It seems that this new value is stored until the GET method (GETITEMS_GET_DATA) is called.
Indeed, when the system calls the GETITEMS_GET_DATA method, I read the CT_SALES buffer using the CRM_ORDER_READ function.
But the new value is no more stored in buffer.
So if I fill the new field in the ISA item sales order, and I click the update button, the new value is no more valued in the screen.
Furthermore, it could be important to know that I'm working in CRM 3.0 release.
Do you know why? May you help me?
Many Thanks
Best Regards.
Daniela

CRM-ISU: Need to change the END date and Start Date for contract items

Hi,
There is an old contract item for which I need to change the end date
and there is a new contract item for which I need to change the start date.
I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
but how to change the start date of a new contract item?
Please let me know if any body is aware of this?
Thanks

Hi,
Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
Regards,
Surjith

Anyone else experiencing random app crash for mail app for IOS 7.1

Anyone else experiencing random app crash for mail app for IOS 7.1

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Has anyone experienced download failure with Fringe Season 4 Enemy of My Enemy episode?

I have purchased the season pass for "Fringe" season 4 (2011-2012) and I am having a problem downloading a specific episode - "Enemy of My Enemy" which aired Friday January 20 and was available for download on Saturday January 21. I have been completely unable to successfully download this episode - and only this episode. Since the first failure, iTunes has successfully downloaded the following items, all also purchased via a season pass: "Criminal Minds" (air date 2012-01-25), "Big Bang Theory" (air date 2012-01-26), and the latest episode of "Fringe" (air date 2012-01-27).
I have submitted a support request to Apple and have received so far one response - I have attempted all of the suggestions and reviewed the link (http://support.apple.com/kb/TS2384) and nothing has worked. I have attempted to download the episode to a Windows 7 machine - same failure. I have attempted to download the episode to a different Mac - same failure.
The end result of each attempt has been either an error "50" or an error "8008" after approximately 500 Mb of the episode is downloaded (out of approximately 1.4 Gb total). I have changed the download from an external drive to an internal drive, and still get the same error.
Only this one episode of this one show am I experiencing failure.
Any help will be greatly appreciated, and I would especially appreciate hearing either from anyone experiencing the same problem with this episode, or anyone who has successfully downloaded this episode.
Thank you.
karl

Update: I have now successfully downloaded the HD version of "Enemy of My Enemy." However, I can't say what happened to make this possible.
After complaining to Apple and failing to get any meaningful response, I waited about 12 hours and then tried again to resume the download with Store > Check for Available Downloads and again got the same -50 error message. Tried a few times, in fact.
Then, just for fun, although I'd already tried this several times previously, I quit iTunes, deleted my ~/Music/iTunes/iTunes Media/Downloads folder, and reopened iTunes. Then I again chose Store > Check for Available Downloads. While the download was in progress, I paused it and resumed it several times, because it seemed to be going very slowly and sometimes I've found that when I pause and resume, downloads go more quickly afterwards. That was the case again with this file. Once it was going at a good clip, I held my breath as it approached the 500.2 MB mark, but the download just zipped right past and continued all the way to the end.
It may have been that Apple actually listened to us and fixed a broken file on their end. (However, even if so, something is still not right, because we shouldn't continue getting the -50 error messages when we try to resume partially downloaded files.) Another possibility, and this is purely speculation, is that when you pause and resume, sometimes the download resumes from a different server. If that is the case, then it's conceivable that at least one server has always had a broken file and at least one has always had a good version, so that it was, and is, the luck of the draw as to which version gets sent to whom. But again, that's just a wild guess.
Good luck to all those still trying to download the file!

Hi! i'm having a problem with my safari as unnecessary new tabs keeps opening overtime i open some link! is anyone experiencing something like this !

hi! i'm having a problem with my safari as unnecessary new tabs keeps opening overtime i open some link! is anyone experiencing something like this !

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to change the posting date in UD stock posting for a HU managed item?

Hi,
We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
Thanks & Regards,
Madhavan Krishnamoorthy.

I don't think you can.
Craig

Unable to change stock posting date at usage decision while inspecting HUs

If we were using materials without WMS it's simple: thereu2019s a button in the screen for stock posting by which we're able to change document date and posting date; but we're using WM and the screen is slightly different: the button I'm referring it's gone!
So, how to change the posting date at posting stock in QA11 when we're using handle units? Some end-user told me that in version 4.7 this was possible. I don't think so ...unless there was something customized at WM IMG...or maybe they were using a USER EXIT to bring a pop-up window for this (I'm starting to believe that this was implemented..). This is the first time I work with HUs, so I don't know how to manage this.
Anyone?
Seba
Edited by: Sebastian Sniezyk on Apr 3, 2009 10:16 AM

I solved it in this topic: Changing posting date at usage decision for handle units. How?

How do I stop DW CS6 randomly changing file permissions via FTP?

How do I stop Dreamweaver CS6 12.0.1.5842 randomly changing file permissions when it uploads files to my web server via FTP.
I can no longer trust Dreamweaver to upload websites correctly as it changes permissions on some files which then deny the server access to the file which in turn makes the webpage unreachable/return a 403 error.
This is driving me insane.
I'm using an early 2011 Macbook Pro 10.7.5.

Hi,
I'm having this problem too. Has Adobe fixed the issue yet? This appears to be an Adobe problem, not all the web hosts out there. CS6 is ramdomly (meaning: not every time) changing permissions on files uploaded with it and is not usable for web work until this problem is fixed by Adobe or a solution is provided. If I wanted to use a separate FTP program I would not have recommended that my employer buy multiple Adobe CS6 product licenses. One of the primary appeals of DW is the integration of FTP into the workflow.
I am using a destop iMac2.8 GHz Intel Core 2 Duo, 4 gigs of 800 MHz DDR2 SDRAM.
OSX 10.7.5
I am using DW Version 12 Build: 5808
Dreamweaver CS4 that I was using until this new purchase was working just fine. No file permisssion changes. I am being forced to go back to using it until Adobe posts a fix for this.
I should ask while I'm here: has anyone found a solution for this yet?
Thanks,
-c-

Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done?

Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done? His phone was stollen once last month need to get this done ASAP to prevent future headaches. Ty

You can not change the date of birth on the account. Apple makes that clear up front when the account is created.
The only way to "fix" this is going to be for him to create a new account with the correct information. Any apps purchased with the old one will need to be re-purchased with the new account. They can not be transferred.

Error message while changing the delimit date of a job in ppome

Hi experts,
I have delimited a job in ppome to date 11.05.2011. But now i want to remove that delimit date and change it to unlimited(31.12.2999). when iam trying to change the delimit date it is showing a popup message 'select a date between 15.11.2008 and 11.05.2011'. Can anyone say why it is showing this message. how can i delimit that job again to 31.12.2999.? Same problem with the position also.
Pls help...

Dear Priaynka,
Thanx for ur reply, I am again furnishing below the details:-
I have to change the Valuation Class of the material :-
7 POS for which Goods Receipt & Invoice Receipt have been done from period 1 to 7.
1 PO for which Goods Receipt & Invoice Receipt have not been made.
All the material reced in period 1-7 have been consumed by MFBF. Now no material is available in the material in that plant.
Should I change the valuation class by deleting the line item of all the PO's 7 POs + 1 PO.
Please advise, as the fresh PO will be made with new val class and GR/IR and Consyumption will happen after the change is made.
Please advise if I am wrong in the procedure.
Regards,
Alok

Dont allow to change item level data in sales order.

Hi all,
I have a requirement in which, users should not be allowed to change item level data or not allowed to add any new items in sales order on a certain condition. But they should be allowed to change the header level data.
How can i achieve this.
Can anyone help me?

Hi,
Check below exit.
MV45AFZZ and in form USEREXIT_MOVE_FIELD_TO_VBAP.
Here check for ur validation, If passes then CHECK variable SVBAP-TABIX. If it is 0 then item is created. If it is GT 0 then item is changed. Other way could be...
select data from VBAP for each sales document and item in xvbpa internal table.
If for any item u don't have data in VBAP table that means u r adding that item. So issue error message.
*       FORM USEREXIT_MOVE_FIELD_TO_VBAP                              *
*       This userexit can be used to move some fields into the sales *
*       dokument item workaerea VBAP                                  *
*       SVBAP-TABIX = 0: Create item                                 *
*       SVBAP-TABIX > 0: Change item                                 *
*       This form is called at the end of form VBAP_FUELLEN.          *
Thanks,
Vinod.

Anyone experienced random changes to CRM data?

Similar Messages

Maybe you are looking for