Anyone have a solution to stop 3b error in vista pointing to ctaud2k.sys
Currently running Vista ultimate 64 bit with X-Fi Fatality card.Been getting Stop 0x3B error pointing to ctaud2k.sys after system runs for several hours. I've been pretty proacti've in seeking a solution, but haven't been able to find one. I've already attempted several uninstalls and re-installs of the most current driver. I've also downloaded the driver from windows update. I am able to get sound from my 2 speakers ( not going to bother with a 5. system yet )but am beginning to tire from having to deal with this bsod. After going to 24 pages of forum postings and finding nothing, I've decided to post this to see if anyone has run into this problem and found a solution. Already attempted running windbg which provides the following:?SYMBOL_STACK_INDEX:? 0FOLLOWUP_NAME:? MachineOwnerMODULE_NAME: ctaud2kIMAGE_NAME:? ctaud2k.sysDEBUG_FLR_IMAGE_TIMESTAMP:? 45ebfefSYMBOL_NAME:? ctaud2k+8f0bSTACK_COMMAND:? .cxr 0xfffff980a3b89c0 ; kbFAILURE_BUCKET_ID:? X64_0x3B_ctaud2k+8f0bBUCKET_ID:? X64_0x3B_ctaud2k+8f0bFollowup: MachineOwner?I have no problems in trying to work on the problem, but would like to know if there is a way to disable the sys file in question and if it is actually necessary. I've seen a similar issue?regarding this with the original beta driver and that a?work around is to?boot to windows advanced boot options and select disable unsigned drivers. This does not appear to resolve my situation as I still keep getting the bsod as is evidenced by the 2 dump files that I now have. Any help would be appreciated.
If your playing a game, trying playing around with your Video driver. Are you running an Nvidia card??http://aumha.net/viewtopic.php?p=454...b270286b307336Message Edited by scorpion_saga on 04-09-200704:47 PM
Similar Messages
-
This is the error I get. I did not find this on the itunes webpage...
"itunes cannot connect to this iphone. An unknown error occured 0XE80000065." Does anyone have a solution. I am not connecting an iPhone, but an iPod. I cannot therefore sync my iPod to my iTunes.Hi prolough,
Here is a link that should help:
http://support.apple.com/kb/TS3221
Cheers,
GB -
iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?
Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT -
"Adobe Reader Expected a Dict Object Error." Does Anyone Have a Solution?
With the latest versions of Adobe Acrobat Reader XI and Internet Explorer 11 in Windows 7 Professional 32-bit Service Pack1, we are having issues trying to open a machine manual PDF within the web browser. The web page is hosted locally with an Apache web server. Once we click link to the manual, the PDF attempts to download, but then we are prompted with an Adobe Reader "Expected a dict object. http: // localhost/Help/ait.pdf" information dialog box. The PDF then fails to load. Sometimes however it will load successfully without any issues. The PDF is roughly 34MB in size.
We have tried other web browsers (Chrome, Firefox, and Opera) and they do not appear to have this issue. What could be causing this problem? Does anyone have a solution for this? Please let us know.Did you ever find the answer to this problem?? I am having the same problem with
my Acrobat 9 Pro document. When trying to insert a page to the document (300 pages long) I get the error message "expected a dict object
Would appreciate any tips you can give me. -
Im trying to restore my Iphone 4S using Itunes but get "unknown error -1 " Does anyone have a solution?
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service. -
I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks
Try running Safari in 32 bit mode. In get info box for Safari,
check open in 32 bit mode. There have been some oddities
on some systems that can cause some issues.
I had thought MS had fixed this, but may not have. -
When I try to install PSE11, I keep getting error 1935, does anyone have a solution for this problem
When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
this problem?This thread from the Premiere Elements forum may help:
http://forums.adobe.com/thread/1286807?tstart=0 -
cannot connect airport express to ipad
I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express. Does anyone have a solution?I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
Since I have had this Airport Express I have spent many hours trying to get it to work.
It works just long enough to fool me and then takes a dump...
Maybe this time?
5 Minute later...
Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
[An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
Wonderful Green LED though. Totally useless piece of equipment AFAIK.
Message was edited by: Daniel Shattuck -
problem opening mail attachments...were opening seamlessly on os 7.0...get an error
Filename
Office open XML document/presentation
File size
Does anyone have a solution? Please help.Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please. -
I am currently using a Iphone 4.I have been trying for countless times to restore my phone but error 16 keeps on popping up.This happened after i updated to the latest IOS.Does anyone have any solutions other than jail-breaking.I have never jailbreaked.I am deperate to restore my phone...Please help!!!!
Most likely a hardware failure, & if so, you won't be able to restore/activte your phone. If you've tried at least two times, & are still getting this error, make an appointment at any Apple store, or call AppleCare.
-
I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?
By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?
-
I have Calendar alerts on every device [Mac/iPad/iPhone] after installing Mountain Lion. How do I stop this? Tech support acted like I was the first person this happened to. Anyone have the solution?
Well, whichever device you uncheck = exclude from calendars (and reminders) via iCloud will be excluded as both, receiver and sender. It's an "all or nothing", I guess. Otherwise it'd get more complicated, and the support calls could easily fill an extra forum...
@lmp68: don't think iTunes is it, in the days of iCloud that would sure take quite an extra effort, if possible at all. -
Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?
One other note I do have parallels installed but not running on both machines.
Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
10:18 PM Sunday; June 1, 2008 -
I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?
If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
For a "blocked plug-in" error, see Step 4.
For a "missing plug-in" error, start with Step 8.
Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them. -
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.
Maybe you are looking for
-
Help setting up BTinternet email with Apple Mail
Hello everyone, I need help setting up a btinternet email account with Apple's Mail sofware. I am setting it up on behalf of my aunt and uncles new macbook pro so I hope i get some solutions quick because Im leaving their place by the end of the week
-
i have an iphone 4s and it just turned off and wouldnt turn back on until i got home and plugged it in to the mains. however it wont connect to my carrier and wont let me turn wifi on or use the internet. all my data is still in place. however when i
-
It requires a admin password to do the upgrade, but i never set one up
as the said in the above, how am i supposed to do...?
-
Testing execution of 6i reports from a HTML portlet
How can I execute an Oracle 6i report from a portal30 HTML portlet. The HTML command looks something like this "C:/reports_6i_runtime.exe userid=user_account/password@connect_string H:/report_6i.rep" I get the message "page cannot be displayed". When
-
Error while downloading material to CRM-Specify the relevant unit of Length
Hi Gurus, I am getting the below 2 errors and one information message while downloading the material from R3. Please help me in resolving the issue. Thanks in advance for your help. Error message: 1. Specify the relevant unit of length 2.Validation e