Anyone managed to install sogo?

hey guys,
did anyone out there manage to install sogo ( http://www.scalableogo.org/ ) on arch?
i'm always failing trying to compile libfoundation.
cheers

Timm, you have to install gnustep-base and gcc-objc. Then add /opt/GNUstep/System/Tools to the PATH
export $PATH:/opt/GNUstep/System/Tools
and execute
./configure --gsmake=/opt/GNUstep/System/Library/Makefiles
make
But unfortunately there is at least one header file missing: NGExtensions/NSObject+Logs.h
Last edited by kfgz (2010-08-28 19:08:15)

Similar Messages

Has anyone managed to install airport/bluetooth manually?

I am aware of the issues as discussed ad nauseum (and yes I was sold one of the old exterme cards ahead of my purchase of a quad!)
I know where to buy the correct kit from US but would like to know whether anyone has managed to install it manually (yes I know it is not user-installable and it affects the warranty)

Yes, I have the Powermac g5 quad and I tried two of them. The first one barely worked and the second worked for only short spurts and its very difficult to install. I had the same luck as others who tried that product on this forum. I ended up buying a usb keychain 802.11b/g from ZyXEL p/n AG-225H. Some of the boxes at CompUSA advertised that it was MAC compatible if you downloaded a driver from us/zxel.com/ag225h. It works for several hours at a time and then a kernel panic crashes my computer. I have talked to ZyXEL and they believe that its just one bad unit. I going to return it tomorrow and get a new one. If it still crashes they want me to work with there Apple expert to troubleshoot and fix the problem.
Hope this helps....Tracy

Has anyone managed to install RAID 0 with 975x PowerUp ?

Out of curiosity, has anyone on here managed to install XP on RAID 0, using 2 SATAII drives ?
I've had problems (another post) ... but I was just curious if anyone has managed to do it.
If so, can you confirm ...
a) what slots in the mobo you put your SATA drives in (there is that single 'special' SATA connector!)
b) what driver did you use for the F6 method.
I just want to see if anyone has managed to do what I have utterly failed to do ...
Thanks,
S.S.

Quote from: SpencerSteel on 18-September-06, 01:49:59
Out of curiosity, has anyone on here managed to install XP on RAID 0, using 2 SATAII drives ?
I've had problems (another post) ... but I was just curious if anyone has managed to do it.
If so, can you confirm ...
a) what slots in the mobo you put your SATA drives in (there is that single 'special' SATA connector!)
b) what driver did you use for the F6 method.
I just want to see if anyone has managed to do what I have utterly failed to do ...
Thanks,
S.S.
Are you still having problems installing windows on RAID? PrvtMsg me if you want some help.
Incidentally you should be using two of the five main SATA ports, enabling RAID in the SATA section (forget the JMicron - disable it)
Next you should be able to enter the Intel RAID config Mgr WHILST the system is POSTing, and set up your RAID volume from there.
This should enable you to use the Intel RAID drivers on a floppy disk.
Quote from: smokinkane on 18-September-06, 22:31:04
I have 2 seagate 7200.10 (perpendicular recording) drives in RAID 0 on the intel controller, no problems at all. This config rips, its unreal, I'm sure it gives all of raptors except the new version a serious headache, haha.
Really? what sort of benchmarks are you getting? I use HDTach for HDD Benching.

Has anyone managed to install aperture 2 with a 12" G4 laptop?

Mine runs Leopard 10.5.2 with a 1.5 Ghz processor and 1.25GB of memory. The system checker says it's fine but it tells me my graphics card will not work it properly. My graphics card is the GeForce FX Go5200.
Has anyone managed to get it installed, it's blinkin annoying that i cannot load it on this laptop?

I've got it running now on my 12" 1.25 PB with 768Mb of RAM, it took some fiddling but it is running now. On launch it tells me 'The version of ImageIO installed on your computer is not supported by Aperture' but still gives me the option to continue and from there it launches as normal.
It appears that my Nikon D3 files are not supported but earlier cameras like my D200 are fine. My PB is running 10.4.11 btw.
I'm not sure I'm allowed to explain how I got it running here, I've no wish to contravene any forum rules but you can contact me at flateric1 AT mac.com and I can give you my iChat name to talk you through it if you wish.
FlatE

Has ANYONE managed to install Vista under Boot Camp on a second drive?

As I understand it Vista cannot be installed on secondary drive because of the "Windows is unable to find a system volume that meets its criteria for install" error message when selecting the install location because it needs a Primary Drive.
In the Microsoft Knowledge Base they recommend removing the primary drive to overcome this but I tried and it failed.
Do I HAVE to go out and buy XP (which allows installs on secondary drives) and then upgrade to Vista.
I'm so darn frustrated with this issue I wondered if anyone has managed to do this successfully.
Thanks
Aln

No problems here. I have Vista 64 Ultimate running on a different internal drive, and I didnt remove my primary OSX drive to do this. In fact it worked without a hitch. There must be something you are doing wrong in the bootcamp preparation phase.

Anyone managed to install an Audigy 2 ZS platinum on RC1 x

I've being trying to install my audigy card on RC x64 pretty much all day and I've pretty much being stuck all the way through, I've tried:
- Installing the vista x64 driver with and without driver signing protection (SBAXVSD_PCDRV_US_2_0_0000)
- Using windows update drivers
- Using the xp x64 driver (SBAX_WEBUP_LB_2_08_0004)
- Extracting the drivers using winrar and then running the setup from the driver file (seem to install fine but nothing detected after restart)
- Installing the driver using the Device manager (get a setup cannot find file error)
All in all, its totally screwed, if anyone knows some other crazy method to sort this out PLEASE HELP!

i know you said you ran the setup from the extracted files but what i did was manually install the drivers using the device manager and at that i was only able to install the multimedia part of it not the creative game port part if you did do it EXACTLY (lol emphasis on that) the way it shows on the explanation then i apologize for misinterpreting what you said but if it was a similar way just try it word for word on the explanation i made and if your unclear on any of the steps let me know cause im not to sure i wrote it clearly enough but ehh if you have any problems let me know k
(oh god im a terrible speller lol ^_^)
p.s. try using 7 zip for it. i mean i seriously doubt that could fix it but you never know especially with how picky vista seems to be lolMessage Edited by ryokowashu on 09-9-2006 04:8 PM

Anyone manage to install Windows 8 on new Macbook air?

Hello,
Got a new "June 2013" MacbookAir 13" 8GB 256SSD and I've been trying for days to install Windows 8 PRO 64-bit using Bootcamp. No joy. Tried both a USB key and an external DVD drive. Same problem all the time: in the Windows 8 setup, I selec the country and language, press Next and it tells me that a "DVD media driver" is missing. I browse to the WINSTALL and BOOTCAMP directories on the USB key which Bootcamp created, it doesn't find any drivers.
If I use Windows 7 32-bit, it gets to the country/keyboard selection and then freezes.
Is it just that Bootcamp doesn't support Haswell yet? That's a pity cos it means I need to keep two laptops.
Thanks for any advice,
- Alan.

Got it to work finally.
Used BootCamp Assistant to download the Windows drivers to a USB key and create a BootCamp partition. Don't use it to create a USB boot disk.
That's my biggest tip - use a DVD not a USB boot disk.
Also, if you get a "media driver missing" error, then get a different ISO image and burn it to DVD. Don't use IMG files converted to ISO files.
When Windows setup boots, you'll probably need to click on the advanced drive options and re-format the BOOTCAMP partition. Otherwise Windows will say that it can't install on it. Be careful that you select that one.
During the setup, Windows will reboot. Remember to hold down the Alt key when you hear the dong and select the Windows DVD (first time) and the Windows drive (second time).
After Windows installs, install the BootCamp drivers in WININSTALL\BootCamp on the USB key by running setup.
Takes maybe 15 mins to install Windows 8.

Has anyone managed to install gimmie?

I'm trying to build gimmie, but I don't know why it refuses to run, it sas pygtk wasn't build with python numeric suport or something like that, but I haven't been able to find anything like that in the web.

Phrodo_00 wrote:
Blaasvis wrote:make install wasn't implemented.
that's why make install didn't worked. Thank you.
I tried searching google for this gimmie you're speaking off. What is it? Sorry for the random post, but you caught my interest xD

Anyone managed to install windows 10 on MBP 2015?

via bootcamp. I tried so many times but it does not work. The laptop reboots while creating the windows partition but the windows installation does not start. Any idea? I know I can use Parallels etc but this question is about bootcamp.
Thanks

I understand the pain. I have done it all and managed to accomplish even the Bios updates. Don't ask me how because I have been through so many machinations that I am not sure. I am not even sure if everything I have is correct and there is no way I can find out. All attempts to have HP "fess-up" has fallen on deaf ears. They absolutely refuse to do what should be done. Instead they wish you to pay for their support. That is something I would not suggest since I do not trust their answers and they have no way to guarantee their work. I had no problem with Microsoft. I let them take control of my computer and everything pointed to bios. My situation currently is that restarting is a crapshoot. It takes multiple restarts to get a solid screen that won't go black. This suggests the nvidia environment. Also I have nvidia crashes while processing once i do get up. These seem to be caught and corrected by Microsoft notifying me of the nvidia and bios problems. I could not even get HP to define their error statement, regarding the bios update, that my hardware did not meet the systems requirements. One positive suggestion I can make to resolve these problems is to NOT buy HP hardware in the future. It is obvious they are going downhill. They have tried to get out of the business before. Perhaps they should. FYI: I was originally VISTA, updated to Windows 7, update to Windows 8.

SCSM Management Server install error

Hi All
I have a curious error with regards to an SCSM 2012 R2 Management Server install to a Windows Server 2012 with local SQL Server 2012 Standard); the SCSM 2012 R2 Data warehouse Server installed fine on a separate server. I've checked that the install
account has full SQL, Local and Domain Admins (for install), I've also fired the install from an elevated command prompt but with same error, I've also checked that PowerShell is set to Unrestricted. There is also mention of a Timeout in the below error,
which has lead me to think it could possibly be SQL SPN issue, however please see below and let me know if anyone has seen this before \ any suggestions welcome!
The error I'm seeing in the MSI log is as follows:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions
PreRegisterExtensions: Begin
PreRegisterExtensions: Starting in deferred mode
PreRegisterExtensions: 20 extension records decoded
PreRegisterExtensions: Connecting via InProc SDK
PreRegisterExtensions: Loading management pack C:\Program Files\Microsoft System Center 2012 R2\Service Manager\System.Library.mp
PreRegisterExtensions: Importing management pack C:\Program Files\Microsoft System Center 2012 R2\Service Manager\System.Library.mp
PreRegisterExtensions: System.ArgumentException: The requested management pack is not valid. See inner exception for details.
PreRegisterExtensions: Parameter name: managementPack ---> : Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
PreRegisterExtensions: The statement has been terminated.
PreRegisterExtensions:
PreRegisterExtensions:    --- End of inner exception stack trace ---
PreRegisterExtensions:    at Microsoft.EnterpriseManagement.ManagementPackManagement.TryImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions:    at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions:    at Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions(Session session)
PreRegisterExtensions: End (fail)
MSI (s) (D8:E4) [13:20:43:793]: NOTE: custom action _PreRegisterExtensionsDeferred unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _PreRegisterExtensionsDeferred returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
04/02/2014 13:20:43.824 [3032]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
04/02/2014 13:20:43.878 [3032]: Detailed info about C:\Windows\assembly\tmp\CPSNRJPD\Microsoft.EnterpriseManagement.OperationsManager.Apm.StatisticCounters.ScriptingLibrary.dll
04/02/2014 13:20:43.878 [3032]: File attributes: 00000080
04/02/2014 13:20:44.124 [3032]: Restart Manager Info: 1 entries
04/02/2014 13:20:44.125 [3032]:   App[0]: (3032) Windows Installer (msiserver), type = 3
Kind Regards
Andrew

Thanks Thomas
Yep had checked permissions, see below. Any others that I may have over looked that you can think of?
1. Login \ install account as local Admin on the Server
2. Login \ install account has full SQL SysAdmin rights, was also used for installing the SQL Instance locally
3. Checked account in AD so that it is ok for Kerberos Delegation
One thing is that I have specified this account for all account options during install (since its a test environment), in production would usually create distinct accounts, is this likely to be an issue though?
Will attempt install again but use Local System etc instead of specifying my domain account just to check \ see if error changes.
Kind Regards
Andrew

Has anyone managed to deploy Acrobat Pro 9.0 for Mac through ARD?

Has anyone managed to get Adobe Acrobat Pro 9.0 for Mac to deploy with any level of reliability through tools such as Apple Remote Desktop?
The main CS3 apps are "better", if still kludgy to deploy somewhat silently, but every time I've tried to get Acrobat Pro 9.0 to deploy, it steadfastly refuses to do so without demanding admin access on at least the first launch, and insisting on running the Updater in the process, which is completely unacceptable.
I should say that I've looked at their Adobe Acrobat deployment site (http://www.adobe.com/products/acrobat/solutions/it/), and it's entirely useless for the Mac version.
Why do Adobe make this so hard?

Okay, I think I've figured this out.
* On a clean machine (ie: no Adobe software), install Adobe Acrobat Pro
* Run Acrobat. Insert license code. Allow it to "selfheal". Quit.
* Run Distiller. Allow it to "selfheal". Quit.
* Edit AcroEFGPro90.plist and AcroEFGDist90.plist which can be found in Contents > MacOS within the Acrobat and Distiller apps respectively.
* Change the "Requires" tags from "YES" to "NO" for all the file resources.
* Copy these to plist files into /Library/Application Support/Adobe/Acrobat/ and overwrite the ones that are already there.
* Run Acrobat and Distiller again. Allow "selfheal" if prompted. Quit.
* Run again. Quit.
* Build a Mac OS X installer package of the following:
/Applications/Adobe Acrobat Pro 9.0
/Applications/Utilites/Adobe Utilities
/Library/Application Support/Adobe/
/Library/Application Support/FLEXnet*
/Library/Preferences/com.adobe.*
/Library/Preferences/FLEXnet*
/Library/Internet Plug-ins/AdobePDFViewer.plugin
/Library/ColorSync/Profiles/
/Library/Printers/PPD Plugins/Adobe*
/Library/Printers/PPDs/.../.../.../ADPDF9.PPD (one per language)
/Users/Shared/Adobe
/usr/libexec/cups/backend/pdf900
* After you've built the package, go through the Acrobat application bundle and find cupshup.pl. Copy it into the Resources folder of the installer package, and rename it to "postflight" (this gets the installer to configure the PDF printer).
* Distribute through ARD.
* Grab com.adobe.* from ~/Library/Preferences
* Distribute the com.adobe.* files to all users; the .plist files can be done through Workgroup Manager, however com.adobe.118.registration must be copied as-is into the user folder, rather than being injected via MCX or the defaults command or any other method, as it's not a plist.
Dear Adobe,
MAKE THIS SIMPLER.
Your Friend,
etc...

Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?

I just got a pair of new 3TB disks that I wanted to put on my Windows 2003 server enterprise x64 system, SP2, all updates installed.
When I first tried to convert to dynamic, I got the error "The operation did not complete" as described in this KB article
http://support.microsoft.com/kb/826823
It says there is a patch, but there is not one for x64, just x86 and ia64
I found another technet discussion here: https://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/cb62238c-b3d0-4989-b45a-ae6de6701a7b?stoAI=10
However its best suggestion is to use a product from AOMIE, but I tried that and it didn't even recognize the disk. It also suggests that one needs a better version of diskpart.exe and to try to the 32 bit version. Anyone have any experience
with that?
I also tried creating moving the disk to Windows 7 x64, making it dynamic there, but when I move the disk back to 2K3 it does not recognize it, and goes back to a 2TB partition. I also saw something about needing a 512 block size for 2K3, but W7 does
not allow anything smaller than 1K.

Hi,
During my research, if found the following artcle which also mentioned a 3TB disk should be supported in Windows 2003 SP1:
Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a720ae72-0c04-44dd-94c0-2e6aecce530e
So I contact the author about this issue. He said it could be caused if your hard disk is a 512e drive as the 3TB drives on the market today are normally 512e drives.
However manufacturers stopping identifying this, and if the controller is old, FSUtil will not able to identify a 512 drive but recognized it as a normal 512n drive.
Thus please provide the drive model so we could search on manufacturer's website for exact information.
Also please paste the screenshot in your reply which Satish mentioned if available.
In addition, here is an article Robert provided:
http://www.windowsitpro.com/article/what-would-microsoft-support-do/support-advanced-format-hard-drives-141584

Anyone managed to get a QuickOffice update ?

I have an E72 with QuickOffice 5 on it.
Supposidly I can do this http://www.quickoffice.com/quickoffice_symbian/free_update/ but have been unable to get a direct download started or receive an email by following the by email process.
So let me ask the forum, has anyone managed to sucessfully go to this website and download an update ? Or is this sale hype/myth ?

I don't want to install it from another site, for all I know these other versions have trojans.
Sure on the paying for it, maybe I would if I knew what I was getting in version 6.
So yes I'll contact their support and get them to fix their delivery mechanism. No point sending me a private link or copy for it, I want to see their advertised delivery method working or a technical explaination as to why it isn't working for me.
Maybe it is another issue related to IMEI number and subsidised phones not having any entittlement to an upgrade, due to some behind the scenes cutting of costs.

Can't manage to install Windows using Bootcamp

For some reason I can't manage to install Windows 7 using bootcamp. It paritions the disk, pop in the Windows installation DVD and restart.
The Macbook Pro takes a while to startup (it stays on the grey screen for a while). After a while of waiting, it goes to a black screen with a white blinking thingy on the top left of the screen. Here is where it gets stuck... I've tried to leave it like that for 30 minutes or so, but it just keeps blinking.
I tried holding the option key at startup and boot into the disc, but it does the same thing. I'm using a original Windows 7 DVD. I tried a XP CD also, no go.
I'm using an early 2008 Macbook Pro (2.4Ghz) with Snow Leopard.
Anyone can help?

Having this exact issue after getting my (Early 2008 24", 3.06GHz, 8800GS) iMac back from having it's stock drive replaced by Apple.
Prior to the drive replacement, it had a stock 500GB drive, and dual-booted 10.6/XP Pro flawlessly. Then the drive died. After running it off an external for a month, I brought it in for service.
Apple replaced it with a 640GB, as apparently they don't stock the 500GB disks anymore.
10.6 works fine.
Applied updates, restored my home directory and apps from the external, no problems.
Ran BootCamp Assistant, made a 120GB partition. Inserted the same XP CD I've used before. Reboot...black screen, flashing cursor. Waited 30 min for it to pick up, nada. Rebooted, held down Option, picked the disc - same deal.
Rebooted into 10.6, checked the disc was readable. No problem. Tried starting an install in VMware from the disc. No problem. Tried the disc in my MBP. No problem, boots like a charm. Highly skeptical the CD is the issue.
Re-ran BootCamp Assistant, merged the partition back into the 10.6 one. Rebooted from my 10.6 install disc, ran Disk Utility's Repair over the internal disc - no errors found. Repaired permissions to be safe (found a couple minor things in my home directory). Rebooted into 10.6 and ran BootCamp Assistant again, this time with a 32GB partition. Same problem.
Rebooted from the 10.6 install media, wiped out the partitions, laid a new, fresh OSX install on the internal. Booted, ran updates, then BootCamp Assistant (did not copy any of my data back this time, nor did I install anything other than the OS and updates). Same problem.
Shut down completely, unplugged for 5 min or so (reset SMC). Booted, clearing PRAM. Booted into 10.6, re-merged the partitions. Rebooted, clearing PRAM again. Booted into 10.6, ran BootCamp Assistant to create the partition. Rebooted, clearing PRAM yet again. Removed all peripherals save the keyboard/mouse. Tried to boot from the Windows CD - same problem.
Dug out my WIn7RC1 DVD for kicks. Same problem through similar iterations. This disc also boots fine on the MBP, and can start a VMware installation without issue.
As we speak, I'm booted from the 10.6 installation media once more, this time zeroing out the internal disc entirely. If this doesn't work, I'm not sure where to go next.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

Anyone managed to install sogo?

Similar Messages

Maybe you are looking for