Anyone seen this behavior installing OVM Manager 3.0.2?

I ran the ./createOracle.sh script.
I then ran the ./runInstaller.sh as the root user.
Looks to me like it installed all 9 parts
The last message I have is:
Oracle VM Manager installed.
Trying ...
Trying ...
Trying ...
Trying ...
Trying ...
It's just stuck here now, re-trying every 15 seconds.
I'm not sure where the log file is or what to do at this point.

I saw in another post to check the ports 7001 and 7002. Here is output from that check in another terminal window:
[oracle@oel1 u04]$ netstat -an |egrep '7001|7002|54321'|grep 'LISTEN'
tcp 0 0 :::54321 :::* LISTEN
tcp 0 0 fe80::216:3eff:fe16:d8:7001 :::* LISTEN
tcp 0 0 ::1:7001 :::* LISTEN
tcp 0 0 ::ffff:198.76.0.178:7001 :::* LISTEN
tcp 0 0 ::ffff:127.0.0.1:7001 :::* LISTEN
tcp 0 0 fe80::216:3eff:fe16:d8:7002 :::* LISTEN
tcp 0 0 ::ffff:198.76.0.178:7002 :::* LISTEN
tcp 0 0 ::ffff:127.0.0.1:7002 :::* LISTEN
tcp 0 0 ::1:7002 :::* LISTEN
[                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • Any Correlation / Has anyone seen this behavior?

    I ran a scan using the MAP toolkit with Active Directory as the inventory method on Monday to start our true up process. Then, that afternoon and today I have had a handful of users suddenly lose their activation in Office 2010 / Lync 2013.
    Has anyone else seen this behavior? I am trying to isolate the issue, and I am wondering if it has to do with how we include the activation for Office in our imaging solution. In my previous organization, we added the product key, but we did not activate
    Office, which it seems is not the case now.
    Thoughts?

    No one else has reported issues with MAP causing activation notices. Are you able to reproduce it?
    Please remember to click "Mark as Answer" on the post that helps you, and to click
    "Unmark as Answer" if a marked post does not actually answer your question. Please
    VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

  • Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly)  but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?

    Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly)  but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?

    Hi
    "Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work"
    If I've understood you correctly I've never known this or anything else to take that long? What were you trying to do exactly?
    "Formerly ran WGM from my 10.6.8 mac (worked perfectly)  but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behaviour?"
    http://support.apple.com/kb/HT1822
    HTH?
    Tony

  • Odd subversion client behavior - has anyone seen this?

    We are using DW CS4 with the subversion client for version control. One of our developers, working on a mac with OS X v 10.5.6, sees odd behavior when using 'Put' to send a file from his local copy to either a testing server or the remote site. What happens is - any unopened folders in the local copy get + signs indicating they don't exist in the svn repository. The  + signs don't appear if the folder is already opened, and they go away on a refresh or on switching between any of the left pane sites (test, remote and repository).  I tried replicating this behavior on a windows box (virtual machine running w2K server 2003 SP 2, terminal services, accessed via RDP) but could not replicate.
    Has anyone else seen this behavior? Is it a harmless annoyance or something more? Any feedback would be great- thank you!

    Thanks, appreciated.  I was just looking for somebody to put this in perspective.
    I've also seen performance & stability issues with the SVN client - it chokes if you try to check out too many files at once, for example when first populating a local copy from a repository.  I would be interested to know if Adobe has a set of best practices for initial setup of repositories and local copies as this would be very helpful, especially for large sites where there might be some valuable ways to save time in setup.

  • I did an OTA update to Lollipop on my HTC one M8, the update downloaded, something installed, firmware is 3.28.605.9, but android version is still 4.4.4, has anyone seen this?

    I did an OTA update to Lollipop on my HTC one M8, the update downloaded, something installed, firmware is 3.28.605.9, but android version is still 4.4.4, has anyone seen this?
    I also cannot check for new anymore

    It is a two stage update.  First update just preps the phone .. not sure what it does really.. most likely removes some Verizon changes to make the real upgrade work correctly.  Connect to wifi and check for the update.

  • Installing itunes; headaches.has anyone seen this??

    Itunes and my iphone 3 and 4 have always been user friendly until this newest upgrade/software update. After uninstalling and trying to reinstalling right when its almost complete..gets to the obtaining publishing data, an error.." An error occurred during the installation of assembly Microsoft.VC80.CRT,type="win32 version="8.050727.4053".publicKeyToken=1fc8b5b9a1e18e3b".processorArchitecture= "amd64"". Please refer to Help and Support for more information. HRESULT:0x800736FD.
    HAS ANYONE SEEN THIS BEFORE? HELP!

    Hello,
    As I promised, we checked in AVAYA center with AVAYA engineer how E60 works with AVAYA SIP server. We found that there is a problem to begin usage of IP telephone service. E60 always sad that craeted profile "Not registered". And don't like to act with WLAN network although WEB-browser works fine in the same time with the same AP-7 and WLAN settings.
    AVAYA took a timeout for identify what's a problem with E60. Some terms on Nokia setting don't correspond to AVAYA terms.
    I hope that it will take not a lot of time for AVAYA.
    I'll let you know about the results.
    Andrey
    6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
    N95, E61i, E71, E72,8600, 5800, N8

  • Need help with Backup problems - anyone seen this before?

    I am experiencing 2 primary problems:
    1) When attempting a recent backup with HotSync on my desktop PC (Treo 700p, HotSync Manager v. 6.01, XP): I hadn't backed up for a few weeks, and this time it crashed sometime during the backup of the Calendar (and this behavior is repeated).  So I then unchecked the backup of Calendar, but then it just hung on Contacts for about 15 minutes, so I realized it wasn't doing anything anymore (I have lots of contacts, but not not 15 minutes worth).  At this point I gave up, but I obviously need to figure out how to make HotSync work again.  Any ideas?
    2) (not sure if this is the forum to address this): When using Backup Buddy v. 2.04 a couple of days ago, every time I tried to backup, it would get maybe 1/5th into the backup and crash and restart.  I figured out in short order that Address.DB is what was causing the crash. [I tried to e-mail the file so I could examine it and save it, but just attaching it in SnapperMail made the device crash].  So I took the chance of deleting the Address.DB (as it seemed small and didn't appear to contain any backup information), and it looks like all of my information was retained.  My question here is: two times since the initial problem, something has recreated Address.DB, which again causes the 700p to crash, so I have had to delete it again.  So when is this file being (re)created, and what is the purpose of it?
    An additional (minor) difficulty that I've had occur on a couple of occasions: After a recovery (where my BackupBuddy information was more current than my HotSync data), I restored, and all the calendar entries were double - 2 identical entries adjacent to one another. Has anyone seen this?
    Thanks in advance -
    B
    Post relates to: Treo 700p (Verizon)

    Sounds like the device has become corrupted.
    Post relates to: None

  • Has anyone seen this display problem?

    I even changed my video card and still had the same issue? has anyone seen this or know how to fix this issue?
    I tried to show a screen capture but didnt have any luck but the issue is alot of my icons are showing pink lines on them and when in certain application and safari the pictures are showing up all pixelated with pink and green pixels instead of displaying the correct image? is it possible the AGP slot is bad? i just upgraded to 10.5.8 hoping to correct the problem but no luck. Also this is a Power PC 1.8 ghz.
    Thank You

    I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
    Anyhow... Mr. Ah
    The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
    Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
    If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
    Post back and say what the situation is, especially if you just recently updated to 10.5.5.
    And post back with what kind of G5 you have, look in the "About this Mac" window.
    Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

  • Has anyone seen this behaviour of AccessHW In Port?

    Yesterday I was trying to check the operation of a plug-in PCMCIA parallel port, specifically I wanted to know if there were any timing issues with this device on an XP machine, so I thought I would try the AccessHW In and Out functions in Labview. I installed an old copy of Labview 6.1 (It was 5:50PM and I wanted to do this fast!) and tried it.
    Reading the memory location where the device's status port was supposed to be just returned zero. Strange, I thought, so I tried some other addresses in the I/O range. I got zero from every single one. I tried the same on my own laptop, which is also XP, and I was getting sensible numbers from addresses in I/O space.
    Has anyone seen this behaviour? The machine has McAffee on-access protection running, which cannot be disabled (company IT policy), and I have a suspicion that this might be blocking accesses to low memory, is this possible?

    Sorry... my mind is not working well this morning   You had mentionned that in your original post and the fact that it is a PCMCIA parallel port.
    As for the address location, I have seen addresses in the 0x2000 region for add-on parallel ports (not PCMCIA).
    I haven't used a PMCIA device with Win-XP.  Does the address info for that port appear under properties when you look at the HW devices within the Control Panel's System.  From what I can recall, you can change the PCMCIA serial port number within the HW device, so maybe the properties will list the address.. 
    Have you checked this?
    RayR.
    Message Edited by JoeLabView on 07-02-2008 11:20 AM

  • Has anyone seen this MacBook Pro 15" 2008 problem before?

    Hi. My MacBook Pro has developed a fault whereby a horizontal line appears on the screen, the mac freezes then a host of vertical lines gradually appear on the screen until it is obscured. Something similar happened in May last year and Apple charged me over £300 to repair it, replacing the 'mother board'.
    I have so far taken it into the Apple shop twice in the last week (a two hour round trip). Both times they have opened it, cleaned it and declared it fixed. This time it lasted about an hour before happening again, although this time at least I've been able to restart it.
    Has anyone seen this before, or have any advice about how best to proceed?
    I have put a video of the symptoms here:
    20120915 135612 - YouTube
    Thanks for reading. This is my first post so apologies if I've rambled a bit!
    Steve
    MacBook Pro 15", late 2008.

    I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
    Anyhow... Mr. Ah
    The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
    Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
    If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
    Post back and say what the situation is, especially if you just recently updated to 10.5.5.
    And post back with what kind of G5 you have, look in the "About this Mac" window.
    Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

  • Pop-up window with an attempt to open a URL - has anyone seen this?

    I was browsing a website for music lyrics when a suspicious pop-up appeared, along with a very small browser window (about an inch square on the screen). This has happened twice even though I have pop-ups blocked.
    The pop-up had the Safari icon and looked like a standard mac window. The text contained the following:
    <edited by host>
    Antivirus 2009 will perform a quick and 100% free
    scan of your computer for Viruses, Spyware and Adware.
    Do you want to install Antivirus 2009 to scan your
    computer for malware now? (Recommended)
    There is a cancel and an OK button at the bottom.
    The small browser window appears to be contacting the onlineprivatescan.com URL
    I did a force-quit because I did not want to click either button.
    I reset Safari, and ran the DNSChanger Removal Tool
    from macupdate, but it didn't find anything. I have not loaded codecs from any websites and I had just completed the latest Apple updates for OSX, Quicktime and iTunes before this problem occured.
    Has anyone seen this? Is this serious? I've never had any problems with Safari before this.

    Mac OS X 10.4 Tiger automatically checks your downloads for malicious software and content that could harm your system or collect information from your computer. You can read more about that here:
    http://support.apple.com/kb/HT2340
    If you feel you need added protection, read on:
    SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
    http://macscan.securemac.com/
    The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X. Called DNSChanger Trojan and also known as OSX.RSPlug.A Trojan Horse, the software attacks users attempting to play a fake video file.
    Upon attempting to play the video, the victim receives the following message:
    “Quicktime Player is unable to play movie file.
Please click here to download new version of codec.”
    Upon running the installer, the user's DNS records are modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's DNS records stay modified on a minute-by-minute basis.
    SecureMac's DNSChanger Removal Tool allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
    There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac. A white paper has recently been published on the subject by SubRosaSoft, available here:
    http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
    Also, beware of MacSweeper:
    MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
    http://en.wikipedia.org/wiki/MacSweeper
    On June 23, 2008 this news reached Mac users:
    http://www.theregister.co.uk/2008/06/23/mac_trojan/
    More information on Mac security can be fund here:
    http://macscan.securemac.com/
    More on Trojans on the Mac here:
    http://www.technewsworld.com/story/63574.html?welcome=1214487119
    The latest news on the subject, from July 25, 2008, is:
    Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
    The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
    In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
    Net security groups say there is anecdotal evidence that small scale attacks are already happening.
    Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
    You should also read what a major contributor called tacit has to say here:
    http://tacit.livejournal.com/238112.html

  • Surely SOMEONE HAS SEEN THIS BEHAVIOR???  Distorted Add Remove control!

    Lots of people have VIEWED this posting since I first posted it on Nov 30th,
    but I can't believe that NOBODY ELSE HAS SEEN THIS BEHAVIOR!
    So here it is again....
    Can anyone tell me why on some pc's my Add Remove list control appears stretched out - that is, the right-side 'selected' list box will extend to the left covering the add/remove buttons and the same 'selected' box is only half drawn from the left side (right side missing), including the title being truncated, and the title is then duplicated to the right in its entirety. (It is hard to describe but I can provide a screenshot if needed).
    As soon as an item is selected or de-selected, it re-adjusts itself to normalcy!
    It seems to be a browser independent problem which ONLY happens on SOME pc's and NEVER on others! This leads me to suspect an out-of-date jar or class file on the local pc but I can't seem to find anything inconsistent.
    CAN ANYONE HELP?! It is preventing us from putting this page into production and I would hate to have to write my own replacement, as it would take more time than we have.
    Thanks in advance for your assistance,
    <-j->
    PS - I have tried REPEATEDLY to add some Duke Dollars to this submission to no avail! The link just goes to a Pge Not Found or something similar

    As I mentioned in my original post, it seems to be a non-browser related problem - that is it shows up MOSTLY in IE, but has been seen also in Firefox.
    Any suggestions on what further to check would be GREATLY APPRECIATED!

  • Can anyone explain this behavior and tell me how to fix it?

    Using NetBeans 6.5 on Windows, Glassfish v2.1
    I have a JSF application with a page that has a tab set.
    On one of the tabs I have a panel with company information.
    One of the components on the page is an InputText field with the value bound to a session bean variable.
    The tab also has an Add button.
    Here is what the JSP looks like for the input text and button components
       <h:inputText binding="#{MainPage.companyNameTF}" id="companyNameTF" readonly="#{SessionBean1.readOnlyFlag}"
       <h:commandButton action="#{MainPage.mainAddBtn_action}" disabled="#{SessionBean1.disableEdit}" id="mainAddBtn"
            style="font-family: Arial,Helvetica,sans-serif; font-size: 14px; font-weight: bold; left: 425px; top: 380px; position: absolute; width: 75px" value="Add"/>
         This is all plain vanilla stuff and I would expect that when the Add button is pushed, the session bean property would be filled with
    the value entered in the input text field.
    In the java code for the page, I have a method to process the Add button push.
    Originally, it just called a method in the session bean to check that a value was entered in the input text field by checking the bound
    session bean property.
    For some reason, that was not getting filled and I was getting either a null or empty string rather than the value in the text field.
    I added some checking in the method that processes the Add button push so I could check the values in the debugger.
    Here is a sample of that code:
        public String mainAddBtn_action() {
            String s = sb1.getCompanyName();
            s = (String)this.companyNameTF.getValue();
            s = (String)this.companyNameTF.getSubmittedValue();I check this in the debugger and NONE of the variants that I have listed have the value that was entered into the text field.
    The submittedValue is null and the others are empty strings (that is what they were initalized to).
    This is all pertty straight forward stuff and I am at a loss to explain what is happening.
    Can anyone expain this behavior, and, most important, how can I force the values to be present when the Add button is pushed.
    I have never experienced this problem before, and have no clue what is causing it.
    Thanks.

    Basically, the component bindings are just being used in plain vanilla get/set modes.
    I set them to "" when I do a clear for the fields and they are set to a value via the text field.
    No other action other than to read the values via get to insert them into the database.
    And, I always use the get/set methods rather than just setting the value directly.
    This is what is so strange about this behavior - I have created dozens of database add/update/delete pages using this same model and have not had a problem with them - even in a tab context.
    Not a clue why this one is different.
    I did notice that I had an error on the page (in IE7, you get a small triangle warning sign when something is not right).
    I figured that might be the problem - maybe buggering up the rendering process.
    I tracked that down and do not get that anymore (it had to do with the PDF display I was trying to get working a while back), but that did not resolve the problem.
    I don't think there are any tab conflicts - none of the components are shared between tabs, but I will see what happens when I move a couple of the components out of the tab context.
    I noticed that it seems to skip a cycle. Here is what I can do.
    1) Fill in text fields and add a record - works fine the first time.
    2) Clear the text fields
    3) Enter new data in the text fields and push Add
    4) I get an error saying fields are blank from my data check process.
    5) Enter new data and push Add - the record is added with the new data.
    My work around is to not enter data in step 3 and just accept the error message in step 4, then go ahead and enter the real data in step 5.
    Very ugly, but it works every time.

  • My iPad will not connect to a computer with the cable which  means no updates or down loads. I have tried new cables and different computers. Has anyone seen this before?

    Has anyone seen this issue before?

    Possibly. Do you have other devices and will they connect?
    One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
    I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it.

  • I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this???

    I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...

    Try this article (disable firewall)
    http://support.apple.com/kb/TS2799

Maybe you are looking for