Anyone struggling with gestures and font issuer since upgrading to Lion?

I am really frustrated since "uprgrading " to Lion!! I no longer have pinch and zoom functions except in safari!
wont work in any other program, including my desktop! I have tried resetting trackpad, restarting-- any other suggestions?
I also can't adjust the font size anymore? In mail I can only adjust the side bar to small or large? No controls over font in address book.
Am I missing a setting?

Hi,
Have you disable the adobe flash accerlator? or how about your wifi setting? is it a WPA? If yes, changed to WEP.
Try
Johnson mok

Similar Messages

ISight/Quicktime issues since upgrading to Lion

Hello,
I have tried everything but I can't seem to come up with a solution. Problems have arose ever since upgrading to Lion on my early-2008 Macbook Unibody. I have seen many users on this board saying that Lion has broken their iSight as well. Here are my issues.
iSight
- seen in System Profiler (Hooray)
- cannot be seen by any application
- does not work with any other user
Quicktime
- fails for screen recording, audio recording, and video recording ("The Operation Could Not Be Completed")
- can play movies just fine
Solutions I have tried
1. Uninstalled everything 3rd party
2. PMU reset (several times)
3. Repaired Permissions
Any other assistance would be greatly appreciated. Cheers.

• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, (are you certain that you used
   the correct "reset" procedure?) continue with the following.
• Use Disk Utility to repair permissions and then
   download and apply the 10.7.2 Combo Update:
     http://support.apple.com/kb/DL1459
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates
can sometimes correct problems like yours.
Message was edited by: EZ Jim

Fed up with speed and connection issues since exch...

Last Monday BT done some upgrade work at our local exchange. From that point onwards we have had speed and connection issues.
I use a Belkin G Router rather that the Homehub some that we can run a printer through it and that is plugged in to telephone socket via an extension. But before we blame any of that we have gone back to the Homehub2 so we could see the difference and there is very little.
We live in the countrside so broadband speeds are not great in any case. About 1.8 mg I guess but we have always had no problems. It was good enough for us and we could watch Iplayer.
I was getting fed up with drop outs and speed and yestereday an Openreach guy came out tested everything could not find any problems apart from speed. He made some calls and was told our band width had been capped. He had that removed and yesterday evening speed was a bit better.
Today just as bad again.
Details from router:
Date/Time          January 25 2012 , 21 : 14 : 25
Version Info
Runtime Code version F5D7633-4Av1_UK_1.00.009
Boot Code Version          1.0.37-5.15
Hardware Version           V1.0J3
ADSL Modem Code Version        A2pB015c6
ADSL
Type
Status   No Defect
                Downstream      Upstream
Data rate             287         440
Noise margin     32.3        18.6
Output power   14.8        12.7
Attenuation       58.5      28.9
Figures from speedtester BT
Download speed: 180 Kps
acceptable range speeds is 100 - 250 Kps
DSL Connection rate 286 Kps (DOWN_STREAM) 440Kps (UP_STREAM)
Upstream Test
Upload Speed 346 kps
Upstream Profile 440Kps
Any help would be appreciated
Solved!
Go to Solution.

Hi Welcome to the forums
Your high noise margin will have a major impact on your speed
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

After upgrade to Lion, iMovie 11 won't recognize my ReadyNas disk. Anyone else experiencing application NAS connectivity issues after upgrading to Lion?

I have a ReadyNas NV+ which I use as NAS storage. I make a lot of home movies in iMovie 11 (mostly family movies of my daughter growing up) which fills up my local HDD fairly quickly. I setup iMovie 11 when I was using Snow Leopard to connect to my NAS as an additional disk in the event library and project. I would move events and projects after I finalized and shared them to the NAS disk in iMovie so it would both clear up space on my local HDD but still be available in the iMovie 11 application.
After I upgraded to Lion, I can no longer see the NAS disk in either the project library or event library. I'm concerned if I have created a condition where I won't be able to access the projects and events which I moved to the NAS disk when I upgraded to Lion. Has anyone else experienced this issue and has anyone else found a solution to this? Any help would be greatly appreciated.

Did that work for you? I was looking at that too, but was discouraged by having to use a sparsebundle given Snow Leopard had such great NAS support.
FYI to everyone else, I upgraded my ReadyNAS firmware to 4.1.8. NetGear indicated the following updates with the nre firmware, but it didn't fix this problem:
     New features and enhancements
     1. Added support for Mac OS X 10.7 “Lion”.
     2. Added warning when NFS access to home shares is enabled.
     3. Added a redirect for http://<host>/ip to https.
     4. Added enhancements to advanced AFP permission settings.
     5. Provide download links for exported users and groups instead of asking for email.
     6. Updated ReadyNAS Remote to the latest revision.
     Bug fixes
     1. Fixed javascript error in FrontView.
     2. Delay auto power-off if backup jobs are still queued.
     Limitations
     1. IE 6 no longer supported.
     2. Drives greater than 2TB are not supported.
I found this link which I thought had some useful information: http://carryflag.blogspot.com/2010/06/imovie-event-library-on-network-drive.html
Some people reported success with the terminal command:
     defaults write -app iMovie allowNV -bool true
But apparantly, after the Lion update, fewer people reported success with it. Still looking though... If anyone else has more symptoms to add, please let me know. I might try to use a sniffer program and see if I can pull a packet capture. That might reveal some info....
On another note, has anyone had any problems connecting to their Time Capsule in the same fashion? I had an idea of connecting a USB Raid Array to it and connecting through the TC, but wanted to know if anyone had any thoughts or experience with that.... Thanks.

7310 - Problem with CIFS and Roaming Profiles since upgrade to 2010.Q1.0.2

We have developed a strange problem with our environment which I'm pretty sure is down to the upgrade to 2010.Q1.0.2 from 2009.Q3.4.1 on our 7310 (all the previous 2009 releases had been fine) since nothing else has changed in our environment. I suspect some changes to the underlying CIFS server causing this?
We have virtual Windows servers hosted on a VMWare VSphere cluster which are stored on the 7310 via iSCSI LUNs and also CIFS shares on the 7310 for home directories and separate CIFS shares for roaming profiles - all paths are correct in AD for each user - we also use folder redirection for XP Pro clients to force things like "Application Data", "My Documents" etc. onto the Homedir share.
What we've been seeing recently (which only started happening after the upgrade) is a lot of failed logons to the domain for users. It looks like the usual corrupted profile problem that has plagued Windows forever ...the usual messages that it cannot log the user on with a copy of their roaming profile, and that it will use a temporary one. Some folder redirections (that are initiated via Group Policy) also don't get applied. Users don't see errors when logging off from a "good" profile, and NTUSER.DAT etc. seemingly gets written correctly - the next time they log on, around half the time the users will get these errors as described below:
Event viewer logs show "cannot find the file specified" errors for NTUSER.DAT, along with "directory name is invalid" errors for some of the folder redirections.
More worrying (and what I think might be the real reason for these failures) are the "offline caching is enabled on the roaming profile share" errors. I think that the client-side caching might not be working - possibly the profiles aren't getting flushed and written correctly upon logout?
Now, unfortunately the MMC snap-in for managing shares doesn't seem to support changing the behaviour for client-side caching on the CIFS shares (as confirmed in the latest 7000-series Admin Guide on page 198).
I've been thinking about unchecking the "Enable Oplocks" box which from the CIFS side would completely stop all client-side caching I presume?
Is this likely to be the culprit here, or is there any other known behaviour that could be causing these errors? Is it also worth disabling "Cache device usage" altogether for the Profiles share itself?
Can anyone help? It's a bit of a strange problem, and something I don't want to raise with Sun on our support contract just yet, since at first glance it looks like a Windows problem, but I suspect the storage could well be to blame...

Unfortunately, this is still not working correctly...
So, it looks like it's not related to the offline caching seeing as it all works on the Q2009 despite the warnings...
Some more errors coming out of userenv.log on the affected Windows machines:
USERENV(280.284) 10:07:33:230 ReconcileFile: GetFileAttributes on the source failed with error = 2
USERENV(280.284) 10:07:33:230 CopyProfileDirectoryEx: ReconcileFile failed with error = 2
and later:
USERENV(280.284) 10:07:33:245 GetShareName: WNetGetConnection initially returned error 2250
USERENV(280.284) 10:07:33:245 CopyProfileDirectoryEx: Leaving with a return value of 0
USERENV(280.284) 10:07:33:245 RestoreUserProfile: CopyProfileDirectory failed. Issuing default profile
...which then forces the TEMP profiles.
All other errors linked to this look like "file not found", "invalid path" etc. when the files are present and the paths are correct.
Manually mapping drives using CIFS with UNC paths sporadically fails too now. We have a bunch of GPOs that map shares to users depending on their group memberships - these too are sporadically failing.
It certainly looks to me like it could be a CIFS problem introduced in the Q2010 release.
I'm going to raise a ticket with Sun...

Video and webpage issues since upgrade to Mountain Lion.

I recently installed OSX 10.8(as an upgrade) on Macbook Pro(circa2008) with 2.5 Intel Core Duo processor and 4 gigs of RAM. It had 10.6 on it. Since the upgrade ,video has shown blue squigly lines while playing and web pages show squigly yellow ones. The screengrab is playing a file in quicktime over a Chrome (Safari has same issue) showing yellow lines. The blue lines are there when watching Youtube video as well as while working in iMovie. It does not affect the qualityof video when uploaded. No issues with Jpegs or text files. Only videos and webpages. I'm baffled.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp980#DriversAndSoftware.

Has anyone else had issues with dropping the wifi connections since upgrading to Yosemite

has anyone else had issues with dropping the wifi connections since upgrading to Yosemite

Looking at the Yosemite forum, it is obvious that this is a very common issue. You might want to post in that forum for help and advice.
OS X Yosemite

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

HT2506 Is there anyone else who is having problems printing with Preview since upgrading to Lion OS X?

Since upgrading to Lion OS X, I have not been able to print any of my documents that were created in Adobe PDF. All calls to customer support have been a bust.
When I try to print anything it comes out looking like this:
Apple PREVIEW team!!!! PLEASE HELP!!!

Hi Linc...
Here is a copy of your prior post to me on a different forum...
Still no resolution...
Linc Davis
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 3:13 PM (in response to pshrynking)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, selectHelp from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.
pshrynking
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 4:13 PM (in response to Linc Davis)
Did all of that yesterday, with the Apple Representative on the phone, and nope, still a problem...it was kind of exciting, really, they kept going up and up the tiers of support until I got disconnected...Fortunately I had the email address of the gentleman who was helping me so that I could email him back and let him know that we got disconnected...as you might imagine, he still has not emailed me back. They were able to receive a copy of the form that I use for charting and try it in their facility on their computers, so we know:
1- it is not just my computer.
2- it occurred only after installing Lion OS X, not sure if they have tried it on Snow Leopard, but that's what I would have done if I was them...assuming that somewhere in Apple someone has not upgraded to Lion.
3- it is not just my software.
I think the problem is with the newer iteration of Preview not communicating well with the Adobe .pdf. probably some line of coding that needs to be written and insertedinto their program for multiline text.
:-) Thank you for your help!

Problems with Photos and Fonts and Explorer

I am having problems with photos and fonts when my site is viewed on Explorer. The site is Ostyn-Newman.com The problems can both be seen on the start page -though they happen throughout the site. The photo is supposed to be only 30% opaque and it shows fine on Firefox or Safari, but Explorer viewers get the photo being used as wallpaper at 100% and this steps all over the text. Should I give up a using a photo as wallapaper?
Also the font I am using for "Ostyn-Newman Objects for Fine Homes" shows well in Firefox and Safari, but looks really bad on Explorer products. Should I just change the font? I am currently using Snell Roundhand.

See Roddy's posts in these topics:
Re: VIEWING iWEB SITES ON A PC ?
Re: iweb pages memory intensive
Re: iweb site on my personal domain name locks up
The message in each is pretty much the same but he does give some info of an application that can optimize the web pages to make them more readily readable by IE.
OT

Anyone familiar with forms and snippets

anyone familiar with forms and snippets in IWEB?

An easier way?
Sir, anything beyond iWeb requires effort.
Find a form creator, such as wufoo, and display the form in a html snippet with an <iframe>. In the end it's the same, whether you create the form from scratch yourself or use a service :
http://wufoo.com/
My webhoster provides a formcreator :
http://one-docs.com/tools/formmailgen/
The code is very basic, so one has to dress it up a bit. See if your provider offers a similar service.

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.

Get started with file and font sync

Get started with file and font sync how do you access the 700 free fonts?

Have you requested and received an email that you're eligible for File and Font Sync early access?
If you have, go to creative.adobe.com and download the latest version Creative Cloud desktop after you log in with your Adobe ID.
Then when installed, you should be able to click on Fonts to browse on the Typekit website.

Sometimes I can't wake my iMac by touching the keyboard, and wind up rebooting, anyone have this happen? I have noticed this happening since upgrading to Lion.

Sometimes I can't wake my iMac by touching the keyboard, and wind up rebooting, anyone have this happen? I have noticed this happening since upgrading to Lion.

Hi:
My error...sometimes I assume things and you know what that does!
PRAM reset:
http://support.apple.com/kb/PH4405
SMC reset:
http://support.apple.com/kb/HT3964
Barry

Since upgrading to Lion my address book no longer communicates with iTunes? This means that no new information is getting to my iPhone etc? Any ideas? Thanks

Since upgrading to Lion my address book no longer communicates with iTunes? This means that no new information is getting to my iPhone etc? Any ideas? Thanks

Nathan Miah wrote:
Is there absolutely anything else I could do to sort this such as phone Apple Support
If you want.
or maybe install Snow Leopard using the disc it came on with my Mac and just set it up from a Time Machine Backup on my external hard drive (since it works under SL)?
Did you install Lion on an empty partition, or did you upgrade Snow Leopard? If you upgraded, I'd not recommend erasing it, since your backups are apparently gone. It's doubtful Snow Leopard will recognize them.
It's not just backups on the drive either, there are other important things on there, so why won't they show?
Mixing Time Machine backups and other data is not a good idea. See #3 in Time Machine - Frequently Asked Questions. It sounds like the whole disk is corrupted.
I just really don't understand how this happened. Could it not be an issue with WD because they haven't issued firmware to support Lion yet?
If this is a simple external HD, connected by USB or FireWire, no, unless you installed some of WD's software on it. That shouldn't prevent it from being seen at all, but anything's possible.

Anyone struggling with gestures and font issuer since upgrading to Lion?

Similar Messages

Maybe you are looking for