Anyone tried AM3+ on 880gm-e43 ?

I see some other 880 boards will officially run AM3+ / FX cpu's but they are not listed on the cpu support page for this board, but I see it has not been updated for some time. Want to know if anyone has tried and what cpu, and what messages did they get (unknown cpu) if it did power up.

Quote from: Stu on 21-February-11, 15:28:23
All you've told us so far about this is that it "doesn't work".
Have you checked in Windows Audio settings that your default audio output device is set correctly? (ie 'speakers' instead of 'digital audio')
I'm sorry, let me give more detail on the audio problem. I have speakers plugged into the "Line-Out" (or the light green colored) jack. However, when I scroll over the little speaker icon on the bottom right of my screen (which has a red circle with a white "X" over it), it says:
"Volume: 0
Speakers
2- Realtek High Definition Audio"
When I right-click the icon and press Volume Mixer, it says "No audio device is installed"
If I right-click the speaker icon and press Playback Devices, it lists two devices: "Speakers" (Which also say in a lighter font underneath it "2- Realtek High Definition Audio" and "Working") and "Realtek Digital Output" (Which says the same thing as "Speakers" underneath it).
The "Speakers" icon has a green check mark next to it, and if i double-click it, it says it is enabled.
This is all of the information that I know of that is wrong with my audio. If there is something else that you would like me to check, please tell me. I could use any help I can get.
And thank you for the help with the HDMI and VGA problem. I didn't realize that the integrated video would be disabled.

Similar Messages

880GM-E43 (AMD/AM3) Topic was Removed by Stu

A message was posted but sjay, but deleted by Stu.
Was this about Windows7x64 bitlocker compatibility with 880GM-E43?
Who knows Why? I don't know, can't send Msgs to Stu....
Sjay,
What's up? Can you post under the following if you had useful info deleted by Stu?
https://forum-en.msi.com/index.php?topic=147916.msg1100027#msg1100027
Thanks

Stu removed your other topic because you already have a topic started on the same subject.
For what it's worth, Sjay said this:
Quote
I haven't verified anything because I don't have the resources or the board, but I can tell you that if you connect the TPM cabling it would probably work. My board (GMA-E-55) has a TPM wire/cable connection, I just have no idea of its usage.
Refer to your manual.
Please only post in the other topic. I will lock this topic now.

880GM-E43 - What is the "real" maximum memory for this mobo?

Hi,
I have a system that I built awhile ago that uses the 880GM-E43 mobo. At the time that I built this system, everything that I found indicated that the max memory was 16GB (4 x 4GB), which is what I have installed now.
I've been wanting to have more memory (lots of VMware guests), so I've been starting to look at building a new system, which I thought would have required a different mobo that supports 32GB (4 x 8GB) and a new set of 8GB memory sticks.
While I was researching that, I found this:
http://www.msi.com/product/mb/880GM-E43.html
and under the Specifications tab, it says:
Code: [Select]
DDR3 Memory DDR3 800/1066/1333/1600*(OC)
DDR2 Memory N/A
Memory Channel Dual
DIMM Slots 4
Max Memory (GB) 32
Everywhere else, other than the MSI website itself, still seems to say "16GB" max.
Does anyone know which maximum is correct? Is it 16GB, or is it 32GB?
Please advise.
Thanks,
Jim

Quote from: Bas on 02-January-12, 23:48:42
It's only limited to what the CPU can handle, and that is far more then you can buy at this time
However, MSI only tested at the time of production of the board.
So if you use bigger modules you have to test yourself if it works with your CPU, the board got nothing to do with it.
What ever you do, don't mix sizes and brands, often goes wrong.
Bas,
Not doubting what you said, but I hope that's the case. Will post back as soon as it gets in and I get a chance to test it. As you suggested, I'll initially remove the 4x4GB sticks, and replace them with the new 2x8GB sticks, and see how that works. If it that works, I'll put in the additional 2x4GB (understood what you said, but this is interim).
Then, if that works, I can wait for maybe prices to drop to get an additional 2x8GB kit, but going to 24GB will help a lot with the work that I'm doing (mostly Vmware guests).
Jim

880GM-E43 Flaky Video

New system with the 880GM-E43 and the DSUB and DVI video is flaky with black line interference.Happens sometimes in my house, much more in the owners house. It "may" work using HDMI, I have to reconfirm that. Problem is the owner does not have HDMI monitor. I have updated BIOS, drivers, checked all connections, etc.
Any ideas?
Thanks

1 - I have tried 3 different monitors with the same number of different cables I did try anothe monitor with HDMI and I do not remember seeing the problem. I will recheck as soon as I get a longer HDMI cable so I can put the monitor in the same location and observe it for a period of time.
2 - If you are looking at the desktop, it breaks up with black horizontal lines throughout, they come and go. Nothing to do with watching "video" like "Youtube".
3 - I have tried various refresh rates and resolutions
4 This is a completely new build, 500 watt PS, 4 GB ram, Win 7 Home Premium, Athlon II X4

880GM-E43 won't power on

I built this system about 6 months ago. 880-GM-E43, AMD Phenom II 1055T Hex core. Was running fine and then in the middle of working just powered off. At first I thought power Supply so tested that, it's OK. I can hook everything up and power is fine, except when I plug the 4-Wire CPU power to the MB, It will not power on then. Did my CPU Fry?? If so, what would be a good replacement? I don't need the Hex Core, it was just bundled in with the "Put together yourself" kit from Newegg.

Quote from: georgetaylor on 14-February-12, 05:11:53
I built this system about 6 months ago. 880-GM-E43, AMD Phenom II 1055T Hex core. Was running fine and then in the middle of working just powered off. At first I thought power Supply so tested that, it's OK. I can hook everything up and power is fine, except when I plug the 4-Wire CPU power to the MB, It will not power on then. Did my CPU Fry?? If so, what would be a good replacement? I don't need the Hex Core, it was just bundled in with the "Put together yourself" kit from Newegg.
Guess I didn't give enough info, so here is more:
Rosewill R519 Black Computer case with 500 Watt Power Supply
MSI 880GM-E43 AM3 AMD 880G HDMI Micro ATX AMD Motherboard
AMD Phenom II 1055T Thuban 2.8GHZ Socket AM3 125W Six-Core Desktop Processor
4GB (2x2GB) 240-Pin DDR3 SDRAM 1600 Dual Channel Memory
Seagate Barracuda ST31000524AS 1TB 7200 RPM SATA Drive
LITE-ON CD/DVD Burner SATA

880GM-E43 Re-booted itself while running Prime95 torture test

RE: Newly build 880GM-E43 (MS-7596) BIOS: 2.1; OS: WHS w/PP3 using XP 32-bit drivers
Phenom II x4 925, 2x 2GB Kingston PC3-10600 KVR1333D3K3/4GR (Passed 1 cycle Windows Memory Diagnostic), Fortron 350W PSU FSP350-60GLN(80) (9PA3508505), 4TB WD Green, LG DVD-RW IDE
Re-booted itself this morning while running Prime95 overnight. At the time it re-booted, I've installed current drivers from MSI except "display driver" (defaulted to Standard VGA). This morning, I download & installed the latest ATi Radeon HD4200 driver only (without Catalyst).
Wanted to re-flash to latest BIOS, but failed to find any on MSI website. Any linky to correct version BIOS would be much appreciated.

Thank you kindly for your response and for pointing out those +12V rails "current output" concern.
After double checking on the manufacturer's web page http://www.shopfsp.com/fsp35060gln80/p/426.html and referring to the label adhered on the PSU, both +12V rails is supposedly +12V¹@15A and +12V²@15A and their combined max output is 336W and not 10A & 15A respectively (as shown of the other web page).
Presently, we've two other similar setups and PSU in service for over the last six months is running stable; for now I ruled out the PSU as the culprit to the "re-booting" issue.
Does anyone happen to know what is the power consumption of the 880GM-E43 with embedded ATi Radeon HD 4250 IGP?
Thank you in advance. Ciao!

Temp problem with 880gm-e43

Hey
I have been having a problem with a new build of an 880gm-e43/athlon II 640 quad core.
I haven't been able to get the temps or voltages to read correctly in any monitoring software. Bios temps have read 24-28c, 12v volts 12.28, while software in vista temps have been reading 6c-18c and 12v has been reading 4-5 volts. I have tried amd overdrive, hwmonitor, speedfan, core temp, etc all saying the same thing. I am running;
msi 880gm-e43
athlon 640 x4
corsair 520 watt ps
wd 250 gb drive
Win Vista 32
Kingston DDR3 1333 ram, 2gb
I have turned off acc, green power, amd cool and quiet, changed a large number of settings, but this still remains. I have updated to cat 10.10, added the sb drivers, and I have also updated the bios from v 2.9 to v 2.a via live update, reset all bios settings to optimized, then reset to turning off acc, green power, but have cool and quiet on again. I also have the cpu fan set to 25% now, and sys fan to 50%.
I am at a loss as to the error on temps. Any help would be appreciated
Thanks
PS: Also one question as to Bios updates. I didn't see any listed for manual download under 880gm-e43, it just gave the link for live update. Other motherboards have bios listed for them for manual download. just wondering....

well, been looking elsewhere for the problem
Fredrik said
Vista can not handle other companies' auto-starting programs (very well). That end is where I believe you should look for solutions.
So what you are saying is that Vista is the reason why I can't get anything to monitor accurately? Or is it that having the progs autostart is the problem? Because I have vista running on an older am2 msi board and reading temps/volts/etc properly. I am manually starting the programs after boot and log in and the drivers associated with them seem to be loaded when necessary. So the OS in and of itself doesn't seem to be the issue exactly. It just seems as if something isn't communicating the info properly to the utilities that should be reading it, or they are reading the info given incorrectly. I guess what is puzzling is that there aren't any other comments by other 880gm-e43 owners with this problem so I wondered if it was something particular to my set up, or is this something that will be solved in future updates of software, or is it something else...

Msi 880GM-E43 can't overclock my ram

My Computer Spec:
880GM-E43 BIOS 2.11, Sempron 140/Sempron 145(Unlock)/Athlon X2 5200(Unlock), Windows 7 Home Premium 32 bit
Super Talent WB160UB2G8 (Default: 1600MHz CL8-8-8-24-36 1T)*
Corsair HX850W +12V~70A, +5V~25A, +3.3V~25A
Galaxy GTS250 1GB
WD Caviar Blue WD6400AAKS 640GB 16 MB cache SATA 2.0
ASUS DVD/CD R-W
* This ram cannot find on SuperTalent offical webpage.
Bios show "cmos checksum bad" when I overclock my Ram(1600MHz CL8-8-8-24-36 1T change to 1600MHz CL7-8-8-24-36 1T or 1600MHz CL7-8-7-24-36 1T etc.)
This ram maybe use ELPIDA BDBG ram chips(find from internet)

Got the same probs as you mate. Can't push my 3000+ much higher than 208mhz FSB either, it just resets and sometimes throw up errors when i try.
My specs are as follows;
AMD64 3000+ (Stock cooler)
2x512 Geil Value pc3200 RAM
K8N NEo Platinum
2x 80gig Maxtor SATA (RAID 0)
ATI 9800pro
Temp was really high (idle 49, load 59!) when i first got it but after changing to the 1.4 bios i get idle 36, load 45 now.
Strangely my system is not set at 200mhz FSB by default. When i try to go to default FSB or try 200Mhz FSB it sets to 201Mhz instead so my system is at 2010Mhz, I cant get 200Mhz bus! At this setting its really 'jumpy' when playing games i get little judders/pauses. When i overclock to 205mhz+ then it runs smooth as anything, it's really strange.
Well i've tried AGP at 67 and 68 no luck, moved SATA over to the 3/4 Ports, relaxed memory timings, upped voltage on both ram and CPU, removed drives, etc no luck at all :(
Temps are well within limits (Apart from this the system runs rock solid, primes at full load for 9+ hours overnight easy at 2080Mhz with temps reaching 49C, just absolutely no luck in overclocking any further.
I've decided to use this setup for a HTPC instead and build another with a DFI board and hopefully fare better next time.
H.Hoang

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried pre-compression to improve image quality?

I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
Mike

What you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

Has anyone tried Displayport to VGA adaptor for T410S?

I found Displayport to VGA cable for T410S on Lenovo site.
Lenovo DisplayPort to VGA Monitor Cable 57Y4393
I just wonder if DP can directly transfer to analog port?
Has anyone tried this?
Solved!
Go to Solution.

Does the T410s not have a VGA port built right in? I know my T510 does and I'm almost certain the regular (non-"s") T410 has one.
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010

Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Has anyone tried this? AutoMailMerge Plug-in for Adobe Acrobat

Mail Merge in Acrobat 9 Professional?
Hi, All!
I have been told that I can perform a mail merge similar to MS Word from within Acrobat Pro 9. The main document (with merge type fields) needs to be an Acrobat .pdf. The data source can come from an external file. The key is that the merge is performed in Acrobat, not Word.
I have searched throughout Acrobat Pro 9 but have found no functionality that matches my needs. Can anyone help me with this?
I was informed the there is this outside company that has this "AutoMailMerge™ Plug-in for Adobe® Acrobat®"
http://www.evermap.com/automailmerge.asp
Has anyone tried this? Does it work? Will it do what I'm looking do?
Please help!
Thank you!
Chistina

there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

Anyone tried AM3+ on 880gm-e43 ?

Similar Messages

Maybe you are looking for