AOSP7 - insert an info field - Effective Filters
Hi
I've just installed AO SP7 (from SP00...) and i found a regression (??) with the insertion of info field 'Effective Filters'.
In SP00, the insertion of info field 'Effective Filters' displayed information about the global filter set in the query designer.
Now (SP7), this info-field 'Effective Filters' displays the same information as info-field 'Variables' which are only filter set by user in the variable pop-up...
Any idea about this issue?
Thanks
Seb
I think you have found a bug. I have read the help concerning effective filters and I have tested it. For me the result is: List of variables shows all variables, effective filters shows filters if you add the characterisitic as free characterisitic. And Dynamic Filters does what it should do.
Time to raise a ticket (or with the new word incident).
Bye
Torsten
Similar Messages
-
Document info fields in Word won't update when placed in document header-section
Dear all,
I have a document library using 3 Content Types with metadata columns and a Word-template.
The values of these metadata columns should be displayed within the Word-documents created from content type.
So I've inserted document info fields into the Word-template to display them.
But unfortunately the placeholders are not updated when opening the document again, after metadata values had been changed e.g. by using the edit-form within the list.
From what I have seen so far, this only refers to document info fields resident in header or footer sections.
But this is where I need to place them.
Does anybody know this issue and has an idea of how to fix it?
Could VBA be of use here?
Best regards,
BenHi,
Based on your description, document info fields in Word won't update when placed in document header-section.
Per my test, document info fields in Word will update when placed in document header-section.
Refer to the following article about Add SharePoint Metadata to Word Documents:
http://whitepages.unlimitedviz.com/2011/02/using-document-templates-with-lists-and-content-types-in-sharepoint/
https://www.premierpointsolutions.com/training/help-and-how-to-articles/add-sharepoint-metadata-to-word-documents/
If I misunderstanding the issue, Please offer a screenshot about your issue.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Info Field is not shown in PDF by toolbar Print Version button
Hi Everyone,
I need your help:
I enhanced 0ANALYSIS_PATTERN to include UserID / DateTime information when Export to PDF and excel. I added Info Filed in this template and added this new web item in BUTTON_TOOLBAR_2 Button 3 (Print Version) and 4 (Export to Excel). UserID / DateTime displayng on web is fine and Exporting to Excel is fine also. Only problem is when clicking on Print Version the UserID / DateTime information is not showing in PDF. I created a new button to Export PDFand it's working fine. Somehow just this toolbar button Print Version has issue with Info Field.
Can anyone help me to resolve this problem?
Thanks, JinHi Jin.
I have tried using the separate print template method but didn't manage to get it to work (and not very excited about the concept anyway as it means even more web templates to manage).
But I got it to work without using a separate print template, by inserting the InfoField as part of the Filter Area (because I didnt want it displayed in the face of the Web when the report was run initially). But it seems to be that as long as the InfoField is displayed somewhere in the Web, then it can be exported/printed. Having done the data binding step, obviously.
You mind if I pick your brains (offline) re the print template method?
Patrick
(points if that helps?) -
Variables Display With Info Field Web Item
Dear Friends,
We are facing one issue in BI 7 WAD.Can any one please suggest how to achieve this..
Issue1) In my query, we are having 10 variables and user has enterd 2 variables for his
selection.After executing the web i need to display those 2 variables only.But in my case i
am displaying along the two variables with values and remaining 8 variables as blank.I need
to show those two variables only.For variable display i am using info field web item.Can any one
throw some light on this.
Thanks in advance
Regards
MadhuHi Madhu,
It should work. Plz. check your variable settings again.
Display Static Filter Values = Off (On in case you want to display characteristic restrictions used in your query)
Display General Text Elements = Off (On in case you want infoprovider information)
Display Dynamic Filter Values = Off (On in case you want dynamic filters on runtime to be displayed)
Display Variables = On
Variable Settings -> Only Variables with Values = On
--Priya -
FI12 Bank Account Reference Info field doesn't show for all house banks
We are storing some information in the Reference info. field (T012K REFZL) for bank accounts. We have several house banks defined and this field is available for edit for the accounts for those house banks. We are setting up a new house bank, but the reference field does not show up so we cannot edit its value.
I cannot find any config that allows me to define conditions that would affect the availability of that field. The only difference I can see between the new house bank, is it has a different country than the existing house banks. Existing house banks are in FR and PL, new house bank is in NL.
Any help would be appreciated.
Thanks,
EllenI received one other option from outside this forum that also solves the issue.
Based on OSS Note 1009154 the below record has to be inserted into the u201CV_TFIBLSCREENu201D data view by using SM30:
SAPLFHBANKC, 3, 002, NL, 3. -
Hi Experts,
I would like to display the "last update" information for certain InfoProviders within a BEx Web Template. If I add the web item "Info Field" and save the web template, the icon of the web item is being displayed within the designer. When executing the template the web item is being "deleted" automatically and nothing is being displayed within the portal. Any clues on that? Is this a known bug in WAD?
Many thanks in advance.
Best regards
TobiasHi,
Info field only displays about the Global filters, Local filters and Variables. When you assign the info field in the template you need to give the data provider to that webitem otherwise you will not get any data when you execute your template.
Use text web item, You have several options available such as last refreshed, executed by, changed by, last data upload and so on.
Thanks
Srikanth -
How to insert check box fields in a htmlb: tableview
Hi,
Can anybody tell me how to insert check box fields in a htmlb: tableview in a sequence of rows in a table view. How to generate the sequence no for the checkbox inorder to know the row that is checked.
Thanks in advance,
Aruna.Here is the code which has the custom "Checkbox" in the tableview & Triggers the event. <b>You can identify the checkbox based on cell ID (p_cell_id)</b> in the method "IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START" & Based on the event name + Cell ID. Look at the code & let me know if you any issue.
<b>Layout:</b>
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content id = "content"
design = "design2002+design2003"
controlRendering = "SAP"
rtlAutoSwitch = "true"
forceEncode = "ENABLED" >
<htmlb:page title="Test " >
<htmlb:form>
<%
data TV_ITERATOR Type Ref To zcl_itr.
data iterator type ref to IF_HTMLB_TABLEVIEW_ITERATOR.
create object tv_iterator exporting appl_cons = application.
iterator = tv_iterator.
%>
<htmlb:tableView id = "fligts"
headerText = "Flight"
width = "100"
headerVisible = "true"
design = "alternating"
visibleRowCount = "10"
fillUpEmptyRows = "true"
showNoMatchText = "true"
filter = "server"
sort = "server"
onHeaderClick = "MyEventHeaderClick"
table = "<%= APPLICATION->itab %>"
iterator = "<%= ITERATOR %>" />
</htmlb:form>
</htmlb:page>
</htmlb:content>
<b>Event Handling:</b>
DATA: EVENT_ID1 TYPE REF TO IF_HTMLB_DATA.
EVENT_ID1 = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
CASE EVENT_ID1->EVENT_SERVER_NAME.
IF NOT event_id1 IS INITIAL.
if event_id1->server_event+0(9) = 'chkevent'.
SPLIT event_id1->server_event AT '-' INTO v_event v_dummy v_row v_col.
endif.
endif.
method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS.
CLEAR p_column_definitions.
CLEAR p_overwrites.
DATA: tv_column TYPE TABLEVIEWCONTROL.
tv_column-COLUMNNAME = 'FLDATE'.
tv_column-edit = 'X'.
tv_column-sort = 'X'.
tv_column-TITLE = 'Flight Date'.
tv_column-WIDTH = '100'.
APPEND tv_column TO p_column_definitions.
CLEAR tv_column.
tv_column-edit = 'X'.
tv_column-COLUMNNAME = 'CONNID'.
tv_column-TITLE = 'Conn.ID'.
tv_column-WIDTH = '70'.
tv_column-HORIZONTALALIGNMENT = 'center'.
APPEND tv_column TO p_column_definitions.
CLEAR tv_column.
tv_column-edit = 'X'.
tv_column-COLUMNNAME = 'CHECKBOX1'.
tv_column-TITLE = 'Check Box'.
tv_column-WIDTH = '30'.
tv_column-HORIZONTALALIGNMENT = 'center'.
APPEND tv_column TO p_column_definitions.
endmethod.
METHOD IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START.
DATA: L_EVENT TYPE STRING.
CASE P_TABLEVIEW_ID.
WHEN 'fligts'.
CASE P_COLUMN_KEY.
WHEN 'CHECKBOX1'.
* CONCATENATE 'chk_event' '123' '2323' INTO L_EVENT SEPARATED BY '-' .
CONCATENATE 'chkevent' p_cell_id INTO l_event SEPARATED BY '-'.
P_REPLACEMENT_BEE = CL_HTMLB_CHECKBOX=>FACTORY( ID = P_CELL_ID
ONCLICK = L_EVENT CHECKED = 'false' ).
ENDCASE.
ENDCASE.
ENDMETHOD.
Hope this will solve your problem.
<b><i>* Reward each helpful answer.</i></b>
Raja T
Message was edited by:
Raja T -
How to insert a new field in the Report Designer
Hi all.
I have a query and a report, but the query evolve.
We have a new key figure (inside rows).
In the report designer, I check the data provider.
The new key figure is added in the catalog field.
Now, I would like to insert the new field in the report.
I add a new row in the report structure but it isnt what I want.
In this case, I add a second row inside an another keys figures block.
I want to create a new block for my new key figure
Thanks for your help
CélineYes, key figures is in the field catalog.
But When I do that " Insert a row ", Report designer create a " row 2 " below another key figures.
And it isn't what I want. I want a new block .
For exemple in the tab report structure (My new key figure is "Margin")
I do that
Group Level 1 : key figures
Detail Area
Sales Amount
row1
cell1
cell2
Cost
row1
cell1
cell2
row2 ( the new row added)
cell1
cell2
But I want that:
Group Level 1 : key figures
Detail Area
Sales Amount
row1
cell1
cell2
Cost
row1
cell1
cell2
Margin
row1
cell1
cell2
Thanks for your help -
How to insert the new field to standard scheduling agreement script form.
Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:- Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
document date (field EKPO-AEDAT).
Thanks & Regards
chinnuopen TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT& -
how to lock a drive and/or folder if there is no lock icon in the get info field?, how to lock a drive and/or folder if there is no lock icon in the get info field?
You can create an encrypted disk image.
http://www.macworld.com/article/1154559/password_protect_folders.html -
Inserting a single field in a custom table
hi all,
can u tell me hw could i insert a single field in the custom table.
i have abt 6 fields in the custom table.
5 fields are already populated...
i have to insert one field ..i dont want to use insert statement.
thanx in advanceHI,
You can use UPDATE statement
UPDATE ztable SET SIXTH_FIELD = 'value'
WHERE key_field = 'asdf'.
Thanks
Naren -
GRC 10.0 - Insert a new field on the RISK/OPPORTUNITY
Hello All,
I have an activity to enhance the component below, to insert a new field on there.
The problem is that I don't know how to make it integrated with the save activity.
Embebbed with this component, I have the componet parent grrm_wd_rnp as shown below:
This component is called by the component POWL_UI_COMP. This screen below shows how this initial screen looks like:
Anybody knows how to implement this? It's confusing working with too many standard components conecting each other.
Regards,
RicardoHeinz,
You may investigate logic using UNIONs and a manual tabular form.
Something like:
--get all records above new row
select apex_item... column1
,apex_item... column2
from yourtable
where <logic to limit rows above new record>
union
--get the new row
select apex_item... column1
,apex_item... column2
from dual
where :REQUEST = 'ADDROW'
union
--get every row not in the top query
select apex_item... column1
,apex_item... column2
from yourtable
where <logic to pull all records not pulled above new record>
For this to work you'll need to add your own "Add Row" button and associate it with a branch. Notice the select between the two unions in the above query is a select against dual. This will be your new record when pressing your "Add Row" button (:REQUEST = 'ADDROW').
The following how-to link is a reference for some of the logic you'll need when creating a manual tabular form.
http://www.oracle.com/technology/products/database/application_express/howtos/tabular_form.html#MANUAL
Good Luck,
Todd -
Syntax for inserting a single field
hai
can u please tell me what is the syntax for inserting a single field in ztable.
Regards,
N.selvamuthukumar.inserting a single field doesnt make sense if table has more dan one primary keys.
The syntax is
INSERT INTO TABLE VALUES WA_TABLE.
where wa_table is of type ztable. -
No Information (res+codec) shown at the Info Field
Hi out there,
yesterday I installed a new iMac for a fellow and was wondering why there is at the iMac more information readable than on my MacBookPro although they are both using 10.4.10 (finder: 10.4.7).
e.g. .mov files: cmd+I - Info - there I can find the file resolution and codec. So that would be great for me with tons of HD-Videoclips captured from my Canon HV-10. But I can´t find any different settings and already deleted finder-prefs - with no result.
In my finder at this Info-field I can only see the last opening date. So I mounted my hdd via cifs and afp to the iMac to find out if this is a behavior of these special files but heck - the iMac did show the correct and full information: resolution & codec
Any hint appreciated -
thanks - ChrisMake sure "Date Created" is check in your Finder View preference.
Try trashing your Finder preferences and reboot.
HD > User > Library > Preferences > com.apple.finder.plist
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Macsimum News Associate Editor Creator of 'Mac611 - Mobile Mac Support' -
ESS portal: Hide additional info field in release working time screen
Hi,
I need to know how can i hide 'additional info' field in the release working time screen?
I know i would use personalization but don't know the way to do that.it will be shown in header only in release application, let me explain
In the time recording application, when you enter a record and click
on review, the additional info columns shows the text. This works
because the data is entered by the user and the entered record is
mapped to additional info column.
In time release application, all the records from database are retrieved
and displayed. The user does not enter any data. Hence in this case it
is not possible to map the records to text in the additional info
column. The Error/Warning messages are displayed in the top of the list
with detailed information. We feel the information displayed is
sufficient for the user to take necessary action. Usually in the release
application, there would be lots of records. Displaying text in both
additional info column and also at the top of the list is not a feasible
solution.
Technically it would be difficult for us to change this behavior in the
standard application.
we have new application in EHP5.
Edited by: Siddharth Rajora on Mar 9, 2012 7:10 PM
Maybe you are looking for
-
How can I bring the file size of jpegs down to ~60k?
Hi. I like to resize my photos to 800x600, 72dpi for upload to the web. Now, my cameras are usually set to maximum resolution, which can include 180 or 300dpi, but I can find no Automator action to change the dpi. Using Preview and/or Graphic Convert
-
Is there a way of restarting my Ipad to new Ipad on my Itunes???
i have just brought the new Ipad and when i connected it to my itunes there were two options, new ipad or refresh from iphone. I chose to refresh from my iphone but should have chose the new ipad option. Is there any way of going back and starting ag
-
Matrix Consolidation Profit Center for balance sheet acounts
Hi, I have a situation within a matrix consolidation setup. Balance sheet items that do not necessarily have profit center assignments do not flow into BCS. I created a condition for Consolidation Profit Center in the Load Data stream method as follo
-
Just bought an iphone 3g from a friend and I am currently on a pay as you go contract. Anyone who tries to contact me gets an engaged tone, I have altered the sim card threetimes with O2 to no avail. Please can anyone advise or help Awaiting in antic
-
[Suggestion]Ideas for the next MacMini
Several suggestions for the next MacMini: 1. AMD Fusion "Llano" 32nm. I think you could use this APU that AMD gonna launch very soon. Why? Because it's supposed to be very power efficient, it includes the GPU inside the silicon die, it supports DX11/