Error : Query does not exist in user group

Hello,
I copied the one existing transaction i.e. Z10SD25 and made the new transaction.
Also i created the new Infoset and Query in an existing User group.
I also assigned the Infoset to user group and query to Infoset.
But while running the new transaction it is giving me error that 'Query does not exist in user group'.
Kindly help me with this.
Thanks in advanced.
Regards,
Darshana

Hi,
After assigning the Infoset to user group and query to Infoset, click on 'Generate' button.
Note: The query can only be generated when the InfoSet is assigned to a user group.
Also check whether the usergroup is given or not for queries.
SQ01 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving

Similar Messages

Error - The requested query does not exist on the current server

Hi all,
We've started to get an error when exeucting queries on our BW system. The erorr is "The requested query does not exist on the current server". Even though I can go in an change the query on the server, I get this message when I try to execute it. I also get the same message when I try to run the query in RSRT.
Has anyone else run into this problem?
Thanks!
~Matt

The problem that we had was due to a pre-query not transported up. We transported up the missing pre-query and everything worked fine. If you go into change mode on the query and press the check button. It should tell you which query is missing.

Error: Scope in your query does not exist...

I have an advanced search web part on my page, and wanting to narrow the search scope to my particular site. In trying to accomplish this, I have created a scope in central admin, and modified the Advanced Search web part properties xml to reflect the scope
I created. Within the ResultType tag of that xml, I have this to specify my scope
<KeywordQuery>"scope"='This Site'</KeywordQuery>
After doing this, I attempt a search, but I am getting the following error "Scope in your query does not exist". Am I missing anything? Has anyone ran into this previously? If so, I would appreciate your insight...I have not been able to find any
blogs on this issue. This is on SharePoint 2010.
Thanks

Hi Spawn,
You can specify your search scope in the ResultType tag like below:
<Query>"scope"='Your Scope'</Query>
Here is a detailed artcile, I suggest you can take a look for reference:
Specify Default Scope for Advanced Search Box Web Part without Using Scope Picker
Best Regards
Zhengyu Guo
TechNet Community Support

Scope in your query does not exist

I've created a Search Center Site Collection but the results aren't being refined based on the scopes and I'm getting the message that the Scope in your query does not exist The query is being formed correct as this is what the url displays:
/Sites/Search/Results.aspx?k=bcm&s=BCM
The scope contain one Include rule and the rule seems to work, in that it is finding items (118 in the below example) but the Total is 0. I've tested this similiar configuration in another test site and it shows the same number for both Item Count AND
Total AND it works correctly so I'm guessing this is the issue.
Any ideas?
Joe

Inderjeet,
Both the dev and prod are different is that dev is using a search site col and dev is using just a search page as follows:
dev - http://dev.com/Search/Results.aspx?k=test&s=ACM
prod - https://prod.com/Sites/Search/Results.aspx?k=Test&s=ACM
As for permissions...I noticed that the Ribbon is greyed out in the Search Site Col. I'm an Owner and can add users to that group but am not being provided any access to ribbon.  Could that be an issue?    I still find it
odd that the Scope indicates results but that Total is blank.
If I rerun the query while on the results search page then it returns results
https://prod.com/Sites/Search/results.aspx?k=test, so it can find the data.
Joe

Requested query does not exist on the current server.

Hi All,
I am facing a problem in BI 7.0 related to query view.I am able to create a view on a query and can successfully save it .But when I am trying to open it using Bex Analyzer, it throws an error that query does not exist on the current server.
Please find the steps below which I did to create a query view in BI 7.0.
1.Executed query and then clicked on save from the tool bar.It asks me to save as workbook or save as view.I clicked on save as view and gave some name to view.It saved successfully.
2.Now when in Bex I am trying to open the view , it gives the message 'The requested query does not exist on the current server'.
Please help me in solving the issue.
Regards,
Phani.

Hi,
I am facing the same problem, though some others of my views can be opened.
We had an upgrade of the system to Support Package stack 13. Maybe this caused problems.
My BEx Analyzer Version is:
Support Package 14, Patch 3, Revision 811
Philipp

Problem in WAD (The requested query / does not exist on the current server)

Dear Guru's
When i execute a Web Application in WAD in the selection screen suppose if i give Key product as 86000 then check and execute i get correct data. Then if i come to backpage (Selection screen again using backspace) and change Key product as 86022 then check and execute then i get following error
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Can any one please provide me some good solution...
We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
Thanks and Regards,
kalyan

Dear Jai,
Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Any one have any idea plssssssssssssssssssssssssssssssssssss..........
dude's some soln.....
Thanks and Regards,
Dev
Edited by: Srinivas dev on Jul 4, 2008 2:45 PM

E2E RCA - The requested query / does not exist on the current server

Hi All,
The RCA for managed system is configured successfully and we are getting EWA for JAVA also.
But when i try to look at the statistics through Workload Analysis it gives error "The requested query / does not exist on the current server" and "unknown or deleted query".
I again tried to run CCMSBI_SETUP_E2E report but the problem STILL persists.
Please let me know what are the other methods i shall try.
Thanks,
Rohan

Hi,
Our solution manager is in EHP1 SP23 and BI content is on 704 SP05.
Firstly the BI was configured in 001 client, we changed it to production client and activated the source system as mentioned in SOLMAN_SETP -> Basic configuration.
Later i found out the there are no queries. I already told to update the BI content and SAP BW patch to SP06.
Do you think it will work?
Thanks and regards,
Rohan

The requested query does not exist on the current server

Hy, i created an workbook an QAs with a query that i have trasported from DEV.
The query exist on QAs system but when open the workbook i receive this error message:<i>'The requested query does not exist on the current server'</i>.
When i select ok, the workbokk is opened correctly because the query exist in system QAs.
How can i remove the initial error message .
Thank's
Andrea
System: BI 7.0
tool BEx version 7.0

Hi
When you create a workbook in DEV, you will be assigning a query for that workbook
When you transport workbook from DEV to QA,the assigned workbook comes along with it
When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
Regards
N Ganesh

Requested query does not exist on current server

I have transported a query from DEV to PRD and it went in fine. Now when i try to open the query in designer or analyzer i end up getting error " Requested query does not exist on current server". Though i can run this in RSRT and also can see its entry in RSZCOMPDIR table. Also i am able to execute this query in analyzer when i run it from the history.
Please advice what went wrong and what needs to be done.

Try re-generating the Query in production.
goto RSRT and selet the query. Now click on the third button Generate Report
Now try opening the Query from Query Designer...

ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS"

While calling dbms_stats.seed_col_usage I got the following error. Can someone help me on how to resolve it
sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Thu Apr 14 14:37:38 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> show user
USER is "SYS"
SQL> begin
2 dbms_stats.seed_col_usage(null,null,400);
3 end;
4 /
begin
ERROR at line 1:
ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS".
ORA-06512: at "SYS.DBMS_SQLTUNE_INTERNAL", line 17379
ORA-06512: at "SYS.DBMS_STATS", line 28451
ORA-06512: at line 2
Thank You
Sarayu

According to the documentation:
SEED_COL_USAGE ProcedureThis procedure iterates over the SQL statements in the specified SQL tuning set, compiles them and seeds column usage information for the columns that appear in these statements.
Syntax
DBMS_STATS.SEED_COL_USAGE (
sqlset_name IN VARCHAR2,
owner_name IN VARCHAR2,
time_limit IN POSITIVE DEFAULT NULL);>
It looks like you need to provide a SQLSET_NAME and OWNER_NAME to use this procedure correctly, to which you've provided NULLs. I don't see any exceptions in the documentation that indicate special processing when NULLs are provided.

Error Infoobject does not exists in Infoprovider

Hi Friends,
I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the query works fine in Development and training system.
Any thoughts why am I getting this and way to rectify it? I tried transporting the query again by collecting query elements. Still it gives same error.
Thanks and regards,
Balaraj

Probably your data provider has been changed and transported to quality and your query is still using those objects. Please check the info provider in both system if they are in sink or not.
Regards,
Kams

Segment Builder: 'Business partner does not exist in target group'

After having built a target group in the segment builder the following error message occurs: 'Business partner does not exist in target group'. What is meant by this error message and what has caused this error?

Hi Mahesh,
Are data sources based in infoset¿? If the are based in infoset u can do simple queries.
I create infoset in t-code 'SQ02', once the infoset has been created u can go to 'Enviroment' --> Queries, and here u can created simple queries based in the infoset. With this tool u can check if this infoset has been created sucessfully.
Hope it helps u.
Regards,
Mon

This query does not exist in the database in the system

I have created a query, but when I run it, I receive this error:
You have attempted to open query 0DAT from the Query Designer.
However, this query does not exist in the database in the system to which you have made a connection.
Thanks
Joseilton

dear Joseilton,
the variable 0DAT ist not in active version in your system.
Use BC to activate the variable 0DAT from InfoObject 0CALDAY.
or
you have to create it in your system. therefor change the namespye to SAP-namespace (starting with 0). Open one Query in your system via RRMX and select CalenderDay to create a new variable.
name:                0DAT
descrition:          current calender day
processed by:        SAP EXIT
Characteristic:      Calender Day
variable represents: Single Value
best regards
imberaureus

List View webpart from subsite to Top site shows random error "List Does not exist"

Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrija

try these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

Error: SNAP_ADT does not exist in the database - manual check required

Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
Sury

Hi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE)

Error : Query does not exist in user group

Similar Messages

Maybe you are looking for