Ap management and mangament???

Just moved to new ip address and subnet. On the controller interface which I gave the AP manager 10.100.0.38 and the management 10.100.0.39. From windows 2008 NAP authenication, which IP do I point to? Thanks

Hi Hugh,
You will want to check that your interface settings are correct on the WLC, if you can get on the console:
"show interface summary"
"show interface detailed management"
Then you will want to also verify your switchport configuration that it is connected to.
One of the most common mistakes is the VLAN tag -- if the VLAN is configured as native on the switchport, you will want it to be set to 0 on the WLC. (config interface vlan management x)
-Pat

Similar Messages

Resource manager and images being rewritten in the project root

Hi everybody,
I began using the Resource Manager, and I created two folders, one with HTML files (topics), and another one with pictures present in those topics.
As I transferred the topics to the HTML shared folder the pictures references remained the old ones, i.e. the ones inside the project folder, right?
Therefore I began reassigning the pictures to the ones copied in the pictures shared folder, and here begins to be a little bit illogical and difficult.
I deleted the pictures from the original project folder as I want to save the space and have, of course, the pictures only in the shared folder, however after I reassign the pictures to one of the topics, and I sync it, the pictures I deleted appear in the root folder of the project.
I wanted to have the "common" pictures (they appear in 2 different projects) only in the shared folder (declared as pictures folder in Resource Manager) because if I do a modification of one picture, I would like to have this modification propagated in the second project, right?
And also save some space, as it does not make any sense to me to have the same pictures in 2 places (double space consumed) when I can have them in only one folder.
I would like to know how I can avoid this recopying of the picture files in my project folder, if possible.
The procedure I used was:
1. Found out which are the common topics for the 2 projects and copied them in the Resource Manager shared folder for HTML files.
2. Found out which pictures were on those topics and copied them in the Resource Manger shared folder for pictures
3. I included the shared topics into the project, and reassigned the pictures to the ones that are in the Resource Manager shared pictures folder
4. I saved the topic, and did a sync in the Resource Manger
Did I do something wrong here?
Thank you.

The repository has all the images you may want to use in any of your projects or elsewhere.
Each time you link in a project, that image only is copied to the project, not the whole repository. If either copy changes, you are notified. You then have the choice of updating the out of date copy or breaking the link because for some reason you now want the difference.
Your statement "I saw that if I use an external directory to the actual project where I have pictures, RoboHelp will copy those into the project's folder" is not correct. The Resource pod will show all the images available in the repository but only the ones in used in the project are copied locally.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Management and AP Manager on Different Subnets ...

Hello,
I am getting ready to implement a WLAN where the customer has designed the Management and AP Manger to be on different subnets. I have never done a WLAN implementation in this manner because per Cisco's config guide it states ...
"The AP-manager interface’s IP address must be different from the management interface’s IP address and may or may not be on the same subnet as the management interface. However, Cisco recommends that both interfaces be on the same subnet for optimum access point association."
So, I have always followed this recommendation and have always made the 2 interfaces be in the same subnet with IP's in sequential order. The config guide does say it'll work but I am just not sure what if anything do I have to do for this to work properly ... or if there is really a difference on how the process works doing it either way.
I plan on using LAG with Layer 3 ... most times I place the APs in the same wireless subnet/vlan as the management interface and AP manager but in this case or until I get more info it looks like they all may be in different subnets. So, if that's the case would I just need to use the Option 43 so the APs can find the WLC and if that is the case would I put the AP Manager IP or still use the WLC IP ... guess I would have that same question if I went the DNS route? Or do I still use the WLC IP address for the APs to join and at that point the AP Manager would take over the LWAPP communications?
Thanks for all your help in advance!

You should be using the WLC Management IP as documented in "Cisco 440X Series Wireless LAN Controllers Deployment Guide". Below is quoted from that document.
"The IP address of the WLC Management Interface should be used for Option 43 and DNS resolution of
CISCO-LWAPP-CONTROLLER.localdomain." For further information, see the section on "Understanding
Deployment Basics" beginning on page 13. Detailed information on using vendor specific DHCP Option 43
for WLC discovery is included in Appendices C, D, and E of this document.
Also there is no issue having the AP Manager and Management interfaces in different vlans although not recommended, just be sure to allow both vlans across the trunk to the WLC. I would also recommend placing your APs in different vlans than the WLC Mgmt/AP Mgr vlan. Cisco recommends having no more than 60-100 APs per vlan to minimize re-association problems in case of network failure.

Brief about Console, data manager and Import manager

Hi,
Iam new to MDM we just started installing our MDM components and iam a MM functional guy Can you any one tell me about console, data manager and import manger i need to know the following,
1. what is it
2. How the 3 is interlinked
3. can the data manager be loaded directly without a import
4. is there a std way of creating repository
5. I need to do samples on vendor, customer harmonisation and the spend analysis and matl master harmonisation..
Iam asking too much in this forum but i knw you guys are there to help me out.
Thanks in advance,
Suresh

MDM Console
The MDM Console allows the system manager to administer and monitor the MDM Server, and to create, maintain the structure of, and control access to the MDM repositories themselves. Records are not entered or managed with the MDM Console, but rather with client apps such as the MDM Client.
MDM Client(data manager)
The MDM Client is the primary client of the MDM Server, and is the program most users see on their PCs. It allows users to store, manage and update master data consisting of text, images, and other rich content, and to create taxonomies, families, and relationships. Other clients include the Import Manager, the Image Manager, and the Syndicator.
Import Manager
Allows you to import master data from most types of flat or relational electronic
source files (e.g. Excel, delimited text, SQL, XML, and any ODBC-compliant source),
and to restructure, cleanse, and normalize master data as part of the import process.
2. How the 3 is interlinked
--->
Suppose you are sending vendor information to MDM repository be sending IDOC from R/3. Then the whole process can go as... IDOC will be sent to XI, so XI will generate XML file that contains data. Then import manager can import this file and will so place the data in repository.
Now if you want to send data in MDM repository, the process goes reverse way. Syndicator will generate flat/xml file. This file will be given to XI so that XI will generate IDOC out of it and will send it to XI. This whole process ensures data consistancy
For details refer this link
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm

Credit Management and DMC (Dispute Management)

Hey All, Please help me out with Credit Management and DMC (Dispute Management) in Accounts Receivable. Give me the use and details of both as well as the web links with more info. Thanks in advance
Tina

Hi TG,
The SAP® Dispute Managementapplication enables you to resolve customer disputes overreceivables more effectively.Fully integrated with other SAP financial management applications, it can help youimprove the tracking and processing of short payments,streamline your accounts-receivable processes, and enhance your customerrelationships. Companies thatuse SAP Dispute Managementhave reduced their days salesoutstanding by as much as 20%. SAP Solution BriefSAP® Dispute Management
Pl check this link for more info :
Dispute Mangement
regards
sadhu kishore

Some questions about Skype Manager and Skype Conne...

Hallo,
I found one of your post:
That, if I have some questions I may contact with Contact our solutions team
Sadly that link wont work...
I have few questions and also I contacted with Microsoft support, but sadly they wasn’t able to help me. Only what they suggests, that I may contact with Skype Team trough to Forum, or Facebook...
So, I choose first one and maybe you can help me, or redirect my question !?
About my questions:
As I understand Skype for business is just name what contain two free software, like Skype manager and Skype connect. Also those are free, without charge ?
Also I read that there are two different accounts, like Premium and regular one. Premium contains some benefit. So, If I use that Skype for business manager system to I may or can add some premium accounts for some my staff and leave others with regular account ? I don’t have that manager systems installed jet, but what I read, I understand that I maybe just split credit - or is there way how I may also share regular and premium conots ?
Also, Right now my customers have 25 workers, but what - if soon my another customer also want to use Skype Service, and he have 50 - 100 workers ? Will be there special price for different amount of users on one firm ?
And at last, firm who I represent right now are using Elion VoiP (Elion, is Estonian ISP) service, trough to xLite program.
Sadly that one wont work properly, it will hack, or you cant hear other people and so on. With, Skype everything works fine. So, if he will starting to use Skype manger and will make account for every workers (sips) can he bound those sips with same VoiP numbers what he will use right now with Elion ? Or if not, is there some way how to redirect those numbers (to lose those numbers, is sadly out of question) ?
I hope, you can help me guy´s.
Best regards
Rainer

Tere Rainer,
indeed we don't have the solutions team offer any longer. Let me try to answer some of your questions here.
Skype Manager and Skype Connect itself are free of charge. But obviously you can purchase and distribute paid products via Skype Manager.
Yes, you can freely distribute Premium subscription to Manager group members and leave others without. You can do the same with all kind of Skype products, e.g. Skype numbers, calling subscriptions etc.
There are no discounts with Skype Manager purchases. It's a tool to simplify administration.
Unfortunately you cannot transfer numbers to Skype connect. For more details on which features are supported and how they work please have a look here: https://support.skype.com/en/faq/FA10549/what-is-skype-connect-and-how-does-it-work
I hope my answers could help a bit already.
Tervitustega Mustamäelt.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Resource Manager and Images

Hi,
I upgraded to RH9 (from RHX5) and very happily started to use both the Snippet and Resource Manager functionality.
I seem to have hit a mental block despite reading the help and looking up this forum regarding updating images in the resource manager .....
I have multiple projects and the same image is used throughout the projects - sometimes only once in a project and sometimes multiple times in the same project.
Lets say this image is called Picture1.gif - due to program re-design I now need to update Picture1.gif.
Picture1.gif is stored in Resource Manager and as it is linked then a copy is also stored in my project.
I delete the old image, create a new image, rename it to the original name Picture1.gif and drag it to Shared Resources and then drag it back again so that it is linked.
Despite the back and forth steps this does in fact work - the image is updated in other projects as expected.
However, if an image appears in a project multiple times then I have to change it everywhere before I can rename it, etc. etc.
I feel quite sure that I am missing something here and that the whole process should be simpler!!
I would have expected somehow to be able to update the image in the resource manger and then sync.
TIA
Morven

Hi Morven
In my own experience, it really shouldn't matter where you update the image, as the Resource Manager is a two way street. If you update in RoboHelp, it should be sensed and the updated image copied from your project to replace and update the centralized image. And likewise, if you update the centralized image, Resource Manager should update your project to match the updated centralized image.
Again, I woudn't want to first delete the image followed by saving a new one using the same name. I would either open one of them (centralized or project) and edit as needed. Or edit a copy, make edits, then save using the same file name so the existing image is replaced.
To the best of my knowledge, Resource Manager should sense the change as the date/time stamp should be different as well as possibly the size. Then the automation should kick in to update the image's counterpart and synchronize everything nicely. The only fly in this ointment would be if the new image were different in size from the pixel measurement standpoint. If the new image is wider or taller or narrower or shorter, you would need to ensure that you reset the sizes in your project so they match the new dimensions. Otherwise they will be a bit skewed and have the fun house effect. I believe RoboHelp supplies a script for this.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Metadata Management and CMS

Hello
I have installed BO XIR 3.1 sp3 and Metadata Mangement on a window 2008 sp2 platform. Everything was going well. After a server problem I had to redeploy the Metadata Manager and BOMM apps on tom Cat (5.5).
After the redeployment of the two apps, the BOMM console worked well but it's impossible to view Metadata Management in the cms. Here's the message that I get:
http 404 and :
MetadataManagement/jsp/Integrator_List/list.faces
When I try to configure the repository via the application options of the cms here's what I get:
http 404 :
Management/jsp/Repository_Properties/properties.faces
Do I have to redeploy? refresh a property file ? copy a war file?
Thanks

Hi Harpreet,
Thanks for the reply!
The current architecture is:
PeopleSoft -> SAP ECC -> SAP BI -> BOE -> WebI
We are trying to perform mappings from field names on reports in WebI back to their SAP BI technical name / description, and even into ECC if possible. I was able to run Metadata Integrator in DS to collect lineage information from the BOE server, but this doesn't give me anything further back than BOE. I assumed that I would need to add the remaining steps manually, yet it sounds like you have a better idea.
How can we go about doing this? Are you saying that if I use:
SAP ECC -> DS -> SAP BI -> BOE -> WebI
Then it will show my lineage from WebI all the way to ECC automatically? Do you have any examples of this? If that is the case, then I would like to test it out.
Thanks,
Brian

What are different between gateway and mangement server in scom ?

Hi all,
can anyone let me know What are different between gateway and mangement server in scom ?
thanks,
Sengottuvel M

Hi,
Hope this can answer you question
About Gateway Servers in Operations Manager
http://technet.microsoft.com/en-us/library/hh212823.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Difference bet. Import manager and Import Server

Hi
Can anybody tell me what is the difference between a Import Server and a Import Manager? And How data is imported using these two?
Thanks in advance

Heii,
In MDIS :
MDIS can be installed on any machine on a network. It works with the MDM Server to import data automatically into existing MDM repositories. If MDIS and its associated MDM Server are installed on the same machine, no further customization needs to be done. If the MDM Server is located on a separate machine from MDIS, you will need to edit the MDIS settings file, mdis.ini (for more information, see MDIS Configuration).
Before you begin using MDIS, you need to be sure that both MDIS and the MDM Server are running and that the target MDM repository is loaded and running. Directions for starting MDIS are located in this section. Directions for starting the MDM Server and loading a repository can be found in the MDM Console Reference Guide
In case of Import Manger :
The MDM Import Manager is a GUI cockpit that defines a very specific sequence of steps to prepare source data for import. But rather than perform the import a record at a time as with other import tools, the MDM Import Manager offers a comprehensive set of data transformation capabilities that allow you to pre-process the source data a field at a time prior to import.
Moreover, for each field, the MDM Import Manager collapses the set of all values across the entire set of source records down to the set of distinct values, whose number will usually be dramatically smaller than the total number of records, often by several orders of magnitude.
Field-at-a-time rather than record-at-a-time processing and the distinct value lists of the MDM Import Manager are together the lynchpin of its patent-pending Parametric Import technology, which supports the import of electronic source data from any tabular or XML format.
Hope this might help to remove your confusion between Import Manager and MDIS.
Plese reward If you find this useful.
Rgds
Deepak

Webinar: Change Management and Transport in the Enterprise Portal

SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT
On Wednesday 21 July, Scott Jones hosts the webinar titled Change Management and Transport in the Enterprise Portal as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

Assets management and inventory Management.

This may be simple situation often encountered in industries. The need is to manage an item as an asset as well as manage inventory functions of purchasing, receiving, physical inventory and issue of these assets to customers as inventory materials. The materials are also needed to accounted for depreciation functions.
Can experts throw some light on the kind of best practice process flows that we could often consider.
Thanks in advance for contributors.

Good questions: I think I need to explain the full scenario.
This is for a health care industry. The intention is to purchase the materials as assets and these come from different vendors, but often, it could be the same material. The current thinking is as follows:
1. Forecast the reqiuirement of the materials according the different sizes. For example : small, medium and large. Each of these sizes could come from different vendors with different model numbers, but are groupd under the sizes.
2. Based on the forecast probably using APO, the materials are purchased in ERP for these sizes. But we still need to carry the vendor model number as part of the attributes of the materisl. Here there seems to be three options.
- One is to use Material classification and use capture the model number of the vendor.
- second is to utilise the Form Fit Function functionality of SAP IS for A&D.
- Third potential option might be to use Batch management and capture manufacturer number in batch characteristic.
Once the materials are purchases these are settled to assets and then there is a need to manage their inventory as the requirement is to utilise Logistic execution functionality including sales, delivery and goods issue functionality. In addition the materials also need to be transferred between different SAP plant locations.
There is also a challenge to manage the requirement as more often, the need is for just the size. but sometime there is a requirement for a specific model within a particular size.
I am not too sure whether there is an absolute need to manage seralisation for individual material numbers, but from asset management perspective, is there a need> Pl clarify
Any comments / suggestions on the above is very welcome.
Appreciate your time and thinking and value contribution.
Venkatesh

Q&A db for warehouse management and inventory management

Hello Everybody,
i read on the help.sap website that standard as well as industry specific versions of Q&A db are available. but the website doesnt say where. i searched a lot but the links dont lead to the actual Q&A db.
i would like to request you to kindly share the Q&A db for inventory management and warehouse management with me as i need it for preparing the AS IS documentation.(preferably automotive industry but if not then even standard Q&A db is fine).
thanks a lot.
sapman.

Now QADB will not help to map the clinets requirement. Instead of QADB get AS IS information form Coreusers... thats best practice now....
Go through www.sap-img.com for further details...
Edited by: Ganti on Jul 26, 2008 7:26 AM

Ap management and mangament???

Similar Messages

Maybe you are looking for