AP Report S_ALR_87012077 Update

Hello,
Can someone please tell me how to update the AP Eval Type Report S_ALR_87012077 ?  All the Company Codes currently being used in the system are not displayed on the report ?
Thanks in advance!
Rob

HEllo,
The problem can be caused         
by incorrect variant for the program RFKRRSEL.
Maybe ther is no Data source selected in the variant, so no documents are        
read.                                                                               
Please perform the following steps:                                                                               
1. Go to the transaction SE38 and enter RFKRRSEL in the Program field. 
2. Select Variants option and press the Change button.                 
3. Select the used variant defined in customizing and press            
the Change button.                                                     
4. On the displayed selection screen press the Data Sources button     
and choose Database.                 
REgards,
REnan

Similar Messages

  • Lenovo System Update 5.03 on T430u doesn't report software updates

    On my T430u Lenovo System Update 5.03 running on windows 8.1doen't find any update even though updates are available. More technical details about the problem are reported in my previous thread.
    I'm really pleased if someone can help me.
    Thanks,
    Denis.
    Solved!
    Go to Solution.

    Hi Mithun,
    The problem still persist.
    I've just reinstalled all components:
    - .NET Framework 3.5 SP1
    - Lenovo System Update 5.03.008 (systemupdate503-2013-10-31.exe)
    - Related Patch "Patch module for Lenovo System Update" (sushortcutfix01.exe)
    - Executing DesktopToastsForCriticalUpdates (look at the screenshot) it reports available updates
    - Executing Lenovo System Update it doesn't report any updates to install.
    In logs directory of Lenovo System Update installation directory (C:\Program Files (x86)\Lenovo\System Update\logs) I can extract the same error:
    Info    2014-01-20 , 12.04.56
        in Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
        Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_08_00.xml
    Info    2014-01-20 , 12.04.56
        in Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
        Message: The UDF will be downloaded to-> C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml
    Info    2014-01-20 , 12.04.56
        in Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6()
        Message: Setting PROCESSING status.
    Severe    2014-01-20 , 12.04.56
        in Tvsu.Engine.Process.HelloProcess.Start()
        Message: Error reading C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml, this XML file is not well-formed
        Exception:
            Message: Elemento radice mancante.
            Type: System.Xml.XmlException
               in System.Xml.XmlTextReaderImpl.Throw(Exception e)
       in System.Xml.XmlTextReaderImpl.ParseDocumentContent()
       in System.Xml.XmlTextReaderImpl.Read()
       in System.Xml.XPath.XPathDocument.LoadFromReader(XmlReader reader, XmlSpace space)
       in System.Xml.XPath.XPathDocument..ctor(TextReader textReader)
       in Tvsu.Engine.Process.HelloProcess.ParseUDF(String udfPath)
       in Tvsu.Engine.Process.HelloProcess.Start()
    - The File: C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml
    it's an empty file (0 KB).
    Can you help me?
    Is there a place where I can attach all log files ?
    Best regards,
    Denis.

  • Report for update of Material with deletion Flag from R/3 to SRM

    Hi All,
               Is any report for Updating material in SRM with deletion indicator for those  deletion flag set in R/3...

    Check material status
      IF mat_mmsta EQ '--'.
        lv_msgv1 = iv_ordered_prod.
        CALL FUNCTION 'BBP_PD_MSG_ADD'
          EXPORTING
            i_msgty       = c_msgty_e
            i_msgid       = 'BBP_PD'
            i_msgno       = 426
            i_msgv1       = lv_msgv1
          EXCEPTIONS
            log_not_found = 1
            OTHERS        = 2.
        IF sy-subrc <> 0.
          PERFORM abort.
        ENDIF.
        IF c_on = c_off.
          MESSAGE e426(bbp_pd) WITH lv_msgv1.
        ENDIF.
      ENDIF.
      if not mat_lvorm is initial.
        lv_msgv1 = iv_ordered_prod.
        call function 'BBP_PD_MSG_ADD'
    program name LBBP_PDIGPF2R
    Check material in backend
      CALL FUNCTION 'META_MATERIAL_READ'
        EXPORTING
          i_mtcom        = ls_mtcom_eci
          logical_system = iv_log_system
        IMPORTING
          e_mmsta        = mat_mmsta
          e_lvorm        = mat_lvorm
        EXCEPTIONS
          mat_not_found  = 1
          OTHERS         = 2.
      IF sy-subrc <> 0.
        lv_msgv1 = iv_ordered_prod.
        lv_msgv2 = iv_plant.
        CALL FUNCTION 'BBP_PD_MSG_ADD'
          EXPORTING
            i_msgty       = c_msgty_e
            i_msgid       = 'BBP_PD'
            i_msgno       = 275
            i_msgv1       = lv_msgv1
            i_msgv2       = lv_msgv2
          EXCEPTIONS
            log_not_found = 1
            OTHERS        = 2.
        IF sy-subrc <> 0.
          PERFORM abort.
        ENDIF.
        IF c_on = c_off.
          MESSAGE e275(bbp_pd) WITH lv_msgv1 lv_msgv2.
        ENDIF.
      ENDIF.
          EXPORTING
            i_msgty       = c_msgty_e
            i_msgid       = 'BBP_PD'
            i_msgno       = 345
          EXCEPTIONS
            log_not_found = 1
            others        = 2.
        if sy-subrc <> 0.
          perform abort.
        endif.
        if c_on = c_off.
    IN SRM PROGRAM LBBP_PDIGPF2R BBP_PD 345 throws message "product x is designed for deletion"
    but it is validationg from fm 'META_MATERIAL_READ'
    please close this thread
    br
    muthu

  • Parameters on linked report not updating

    Hi,
    I updated a report adding parameter expressions.  A linked report based on the report I updated didn't get the parameter expressions when I deployed the base report.  Anybody else having that issue?  It's not much of a problem.  I just have to recreate the linked report which is a nusance.
    Thanks,
    DD

    I know this question is old, but I had the same problem today, and I think the answer is useful.
    When you deploy a new "main" report, the linked reports are NOT updated automatically, so you need to refresh them. You can do this easily from the Report Manager:
    1 - Update the main report;
    2 - Go to the linked report, use the "Manage" menu, and in the "Properties" tab click in the "Change Link" button:
    3 - In the following screen, select the main report, and click "OK". This will refresh the linked report with the modified main report:
    4 - Once you're back to the previous screen, click the "Apply" button, to really update the linked report.
    5 - VERY IMPORTANT: Since you changed the main report, all the previous adjustments you made in the linked report parameters were lost - like Null, Hide, Prompt User and Display Text, only the Default Value is preserved - so GO TO THE PARAMETERS tab and
    adjust the linked report parameters again!!!

  • MBAM "Enterprise Compliance Report" not updating "Last Contact" date/time for any/all systems.

    Running BitLocker/MBAM 1.0.1237.1.
    About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
    "Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
    Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
    Hoping someone has experienced this before, fixed, and can share insights.
    Thx,
    DCL

    You may want to look for communication errors under the MBAM node in Event Viewer.
    You may also want to review the registry settings discussed under the
    Configure Lab Computers for MBAM Evaluation section of this TechNet article:
    HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
    HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
    HKLM\Software\Microsoft\MBAM\NoStartupDelay
    Specifically the StatusReportingFrequency
    key.
    Brandon
    MDOP on the Springboard Series on TechNet

  • Report not updating after Form saved in Workspace in Hyperion Planning

    Whenever a form is changed in workspace and saved, it updates the form. I then go to the report to print, the report isn't showing the updated information. I have to go to Essbase to calcall for the report to be updated. How can I get my reports to update as soon as the form is saved. Thx

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • Fuba or report to update calculate procedure in crm

    hello experts,
    please I need Your help.
    Tell me please the Fuba or the report to update new configurations in the used calculate procedure.
    I use the transaction sm53 to delete the cache, but no help.
    Two messages give me the system
               the obligatory condition type is missing
               or
               the condition type MWST is not in the calculate procedure
    The messages are nuts because the condition type is in the calculate procedure
    and the condition type is not obligatory.
    thank You for Your answers.
    Bye and have a good time
    Thorsten

    Are you sure that is the FM used ? I have checked and in the export parameter i haven't found ANSAL anywhere, which is strange validating and not passing it.
    Try tracing the RFC's called (transaction ST01) and see if there is another FM being called to return ANSAL.
    I am more incline towards these :
    HRWPC_RFC_EP_READ_SALARY
    HRWPC_RFC_EP_READ_SALARY2
    As for the question itself, the ANSAL field is only calculated through customizing, and if there isn't any is a regular input field that won't be taken into account during Payment calculation, so i don't think there is any problem in updating it.

  • MBAM 2.5 Compliance Reports not updating

    After much fiddling to install MBAM distributed, I ended up with a remote SQL server and a web server with the SSRS role. The Compliance report has only one entry, my machine, yet there are several more in Recovery database. For version 1.0 and 2.0, you
    had a SQL Job called CreateCache that runs a storedProcedure. However, this is removed from version 2.5.
    How can I force the Compliace report to update with new data? Where are the logs for MBAM that enables me to see when this operation fails?

    There was a problem With the SQL database permission. I thought it worked as intended because of the Helpdesk and SelfService portal worked looking normal and working.
    Event ID 28 has not been seen yet, so not sure if this actually is a valid ID.
    For Compliance and 256-bit With Diffuser (which is removed from Windows 8) we had to deploy KB2975636 -
    https://support.microsoft.com/kb/2975636?wa=wsignin1.0#Prerequisites.
    We find the Reporting feature slow even thou we have low amount of Clients.
    All in all I still believe that MBAM is not Enterprise ready and I would suggest that other Technologies should be considered first.

  • Add a Select List to a Report, for Updating a table.

    I am working on Apex 3.0. I had to allow the Report could update a table. I added two checkbox to the report, and now I should add a Select List. I've tried a lot of ways but I don't know how can I pass the value selected, related to the ID of the row. I've tried with a JavaScript but I couldn't. A process should update the row on the DB when the user change the value on the select list. There is a save button that perform the process. How I could pass the ID of the row and the value to a PL/SQL process?
    Many Thanks for your suggestions.
    SELECT PFA.FOCUS_AREA_ID
    ,FOCUS_AREA_NAME,     
    apex_item.checkbox(1, FA.FOCUS_AREA_ID, DECODE(PFA.FOCUS_AREA_ID, null, ' ','checked="checked" ') ||
    'id="chk'||rownum||'"'|| ' onclick="checking(this)" ') as Focus_AREA_CHK,
    APEX_ITEM.SELECT_LIST(
    *5,*
    PFA.FOCUS_TYPE,
    *'DIS;DIS,ENG;ENG,EXP;EXP,TGT;TGT',*
    *'id="sl_'||FA.FOCUS_AREA_ID||' " ',*
    *'YES',*
    NULL,
    *'-Select-',*
    *DECODE(PFA.FOCUS_AREA_ID, null, 'disabled="disabled" ','' ) || ' --onchange="selectedElement(this)" ',*
    *'NO'*
    *)* "Type"
    FROM PROGRAM_FOCUS_AREAS PFA,
    FOCUS_AREAS FA
    WHERE
    FA.FOCUS_AREA_ID = PFA.FOCUS_AREA_ID(+)
    AND :P151_PROGRAM_ID = PFA.VS_PROGRAM_ID(+)

    **Deleted**
    Edited by: user4498053 on Dec 27, 2011 11:24 AM

  • Any Report that updates the GR document number of R/3 to SRM

    Hi  Experts
    Can any one tell me is there any reoprt that updated the GR numbers of R/3 to SRM
    Because I have done the confirmations in SRM ( 4.0) it created a confirmation number but  the shoppingc art history is not updated with the GR document number .
    Similiar to like CLEAN_REQREQ_UP is there any report that updates the GR document number in the frontend. And also any table for this like BBP_DOCUMENT_TAB for watching the GR entry till the time it gets cleared.
    Please suggest
    Regards
    Srujan K

    Hi Muthu,
    Thanks for your reply.
    My concern is when I do the confirmations in the SRM the shopping cart history is updated with Confirmations number and i can see the status as approved but I am not able to find the GR number besides the confirmations number in the shopping cart history.
    ours is SRM ver 4.0. what could be the problem. when I do the GR from backend and wait for some time the GR document number is getting updated.
    But once after i do the confirmation in the frontend it should automatically post a GR is the backend and
    update the shopping cart history with GR document number which is not happening
    Do I need to check the idoc for this? if so where do i need to check in SRM or in R/3?  because this is in quality system as i doing the testing part.
    So please provide me some solution for this.
    Regards
    Srujan K

  • App Store reporting unneeded updates

    The App Store app on my iPhone reports that updates are available for several of my apps despite the fact that all the apps have been already updated via iTunes. I double-checked the apps and they are all the latest versions. It's annoying because the icon for App Store has a little red circle with a number in it, nagging me to update when no update is needed... any remedy for this? BTW when I plug the iPhone into the Mac iTunes does not report that any updates are needed.

    No way to fix this - it's been like that since the introduction of the on-phone App store.
    As a heads up -- downloading apps through the iPhone itself messes up sync backup settings, so its best never to download anything on the phone anyway.
    I moved this icon, the iTunes icon, the Stock iCon, and the Contacts icon to their own screen all the way at the end of my list of icons, so I never have to look at them again.

  • How / can I have jpg logo objects used on reports automatically updated

    How / can I have jpg logo objects used on reports automatically updated after making changes to the repository copy of the jpg logo object in the repository?   The reports are in the enterprise items folder of the repository and the logo.jpg file is in a subfolder of repository items.  I made changes but the changes seem to apply only after I set my options in crystal reports and open the actual rpt file itself. 
    Is there a way to have the changes to the logo show / apply in all reports that have the repository item logo inserted into it without having to open every rpt file in the repository?

    Yes, I understand that...  the problem I was having was that check box being unchecked whenever an unrelated change was made to rpt file...  I was able to ensure that it remained checked by doing save as to the rpt file and making sure the "enable repository refresh" box was checked and replacing the file when prompted upons saving the rpt file...

  • Send email when report data updated on report server

    Hii all
    please clear me what this triggers functions from me??
    i want to send report email to boss when report data updates on server
    i have used this but neither subscription shows last run time nor email get sent.
    how can i do this??  
    Dilip Patil..

    Hii all
    please clear me what this triggers functions from me??
    i want to send report email to boss when report data updates on server
    i have used this but neither subscription shows last run time nor email get sent.
    The so-called "trigger" is nothing than "when the snapshot has been updated". In other words: it's not the actual data that has changed but a new
    snapshot has been created, which in turn has it's own schedule.
    The wording "trigger" is a bad choice since when it has been introduced and has irritated many people since then.
    For a custom solution check this thread:
    Triggering Data Driven Subscriptions in SSRS
    Andreas Wolter (Blog |
    Twitter)
    MCM - Microsoft Certified Master SQL Server 2008
    MCSM - Microsoft Certified Solutions Master Data Platform, SQL Server 2012
    www.andreas-wolter.com |
    www.SarpedonQualityLab.com

  • SCCM Reporting: Software Updates / Apllication the "Installed date" is missing or null in reports

    When the “V_GS_Add_Remove_Programs” or “V_GS_Quick_Fix_Engineering” queried for installed date (the views that contains information  on updates/application
    installed date),  the “installDate0” Column returns “Null” or is
    "blank" on most of the rows.
    The machine in this example is “X”
    2. As you can see from the machines X's add remove Programs installed Date is given clearly.
    Appreciate your help on this as its for an audit report of windows updates and applications installed date, I know that some applications do not populate this value but my argument is if its visible from Programs and Features why isn't the data being collected.
    Best Regards,
    Michael

    Duplicated post.
    http://social.technet.microsoft.com/Forums/en-US/678489ad-3289-4fd6-8e84-bbaf487abacf/sccm-reporting-software-updates-apllication-the-installed-date-is-missing-or-null-in-reports?forum=configmanagergeneral
    http://www.enhansoft.com/

  • Can Crystal Report XI update data in a SQL Table

    Post Author: abidamin
    CA Forum: Data Connectivity and SQL
    Hi,
    I have a very specific requirement to update a flag field in one of SQL2005 database tables, I need to update a One character field with Y on all selected records printed on the report as a result of running the report successuflly.
    Can anyone let me know if it is possible to update a SQL table field using Crystal Report XI.
    Regards

    Post Author: SKodidine
    CA Forum: Data Connectivity and SQL
    Perhaps this KBase article can be of some help.
    http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2011921&sliceId=&dialogID=18608077&stateId=1%200%2018610053

Maybe you are looking for