AP with HR integration

I need to know if payroll is doing the withholding taxes configuration for the employees who are 1099 vendors, does the 1099 report pull up the amounts withheld in AP transaction code "S_PL0_09000314 - 1099-Misc"
My question is that will the data flow from payroll to AP, if we want to print 1099 from AP. IF yes, where does the integration take place?
And similarly, when the taxes that are withheld are supposed to paid out, will they also flow from payroll to AP, so that they can be paid from AP.
Please provide as many details as possible, with example.
thankyou

Hi
The Integration points between AP and HCM is based on Personnel Number.
Each employee will be assigned a Personnel Number in HCM.
In AP we have to create the employee as vendor. The same personnel number will be given in the master data under Reference Data in the Accounting information tab.
The Advance payments, settlements will be done AP.
while making the cash payments through FBCJ, the you have to select the employee vendor number and in the personeel number section, you have to give the same.
from FBL1N you can see the transactions.
With Regards
Siva Rama Krishna

Similar Messages

  • MBAM 2.5 with SCCM Integration

    Hi
    I've installed MBAM 2.5 and now need to roll back the changes as I didn't specify the -SsrsServer value and this is hosted on a different server. When I try to run Disable-MbamCMIntegration I'm getting the following error
    Disable-MbamCMIntegration : Could not find System Center role settings for 'Reporting Services Point' role at site
    'xxx' on server 'Value removed'
    At line:1 char:1
    + Disable-MbamCMIntegration
    + ~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Disable-MbamCMIntegration], ReportingServicesNotConfiguredException
        + FullyQualifiedErrorId : Microsoft.Mbam.Setup.Common.CmIntegration.ReportingServicesNotConfiguredException,Micros
       oft.Mbam.Server.Commands.DisableMbamCMIntegrationCommand
    If I try to install the Web Applications on my MBAM server with SCCM integration it fails with the following
    The web application prerequisite check found missing prerequisites
    The specified Configuration Manager integration mode does not match the Configuration Manager integration mode currently in use

    Sure
    If you edit the following key in the registry on your SCCM server
    HKLM\SOFTWARE\Microsoft\MBAM Server\Enabled\CMIntegration to 0 and then restart the server it will allow you to re-add the feature with a different config.

  • Unable to install MBAM 2.5 with SCCM integration on named SQL instance

    Hi,
    in production i am installing MBAM 2.5 with SCCM integration but during the installation it asks for the SCCM reporting services point and which it is unable to recognize.
    whereas in my lab environment i have default SQL instance which has reporting installed, in that case it works fine.
    can someone let me know why the issue is coming?
    in the event log the issue is :  Description = "user domain\username is not able to get the lock at this time.Error:0x40480732"

    For the integration part, You need to install the MBAM SCCM Integration feature on SCCM server. For compliance reporting in integration, MBAM uses the Reporting service point for SCCM.
    When installing the SCCM integration feature, you need to provide the name of the reporting Server where Reporting Service point role is installed for SCCM. But it does not provides any option for the instance but for the Server only. We have two instances
    for SQL. One for CAS and other for Primary site. We need to run the installer on CAS and hence need to connect to the SQL instance for CAS.
    We have also tried with the powershell commands but it is not working either.
    Is there any way to install MBAM integration feature on a SQL instance. As far as I know, it automatically picks the instance but not happening for me.
    Gaurav Ranjan

  • Getting started with EP integration

    Hi,
    A company I work for has a .NET web application that they would like to integrate into the SAP Enterprise Portal. There are a few .aspx pages that should be accessed from the portal.  So, we would like to create a tab for our application and have a few links that open the .aspx pages.  Eventually, we would like to get the integration certified.
    This is the first time I've worked with SAP.  From what I've read, doing this type of integration should be fairly easy, but I am not sure how to start.  I'm hoping someone will be kind enough to give me some tips or point me to some good source of information.
    I've installed the NW04SneakPrevJavaSP11, which I believe contains everything I need for SAP including the NetWeaver Developer Studio.  I also installed PDK for .NET and it looks like it has integrated properly with Visual Studio. 
    When I extracted the content of the PDK for .NET, it contained two files, com.sap.portal.dotnet.framework.sda and com.sap.portal.dotnet.services.systems.sda.  I do not see these services in my Control Panel Services.  I've read that I must deploy these through the SDM, but I did not figure out how to do that.
    Can someone please provide some instructions to get me started with this integration?  Do you have a simple example that adds a tab for an application in the portal and contains a link to open a URI?  What should I look for to verify that I have everything installed and working correctly to begin the integration?
    Thank you very much!

    Hi Kenneth,
    If you are looking at integrating .Net web application with SAP EP there are two ways of doing it -
    1. Uset the PDK for .Net and then develop the .Net applications using the Newweaver controls, finally deploy this .Net application on the Portal itself.
    2. If this .Net application is already built and running on a different server other that EP, u can intergate this using a URL reference ans enable SSO form EP to this .Net application. The effort in this case will be very less.
    If you choose the 1st approach , then you have to configure SAP EP to deploy .Net applications -
    1. Configure the .Net runtime in EP
    2. Install the PSK plugin in Visual Studio.
    The two SDA files have to be imported in your Portal using the Software deployment manager, the person who has installed EP will be aware of this.
    There is also a pdf document on SDN which explains everything in detail about the configurations required for PDK for .Net.
    Regards,
    Vivek
    Please reward points if helpfull.

  • Not able to deploy VIO 1.0.1 with NSX integration

    Hello,
    Whenever I try to deploy VIO with NSX integration I stuck on "Configure Neutron networking" step.
    Edge Cluster drop-down menu does not contain any options and so I cannot proceed with the deployment. (DVS works fine)
    As this a POC deployment, I use the same cluster for Management nodes, NSX Edge nodes and users VMs.
    According to the documentation that configuration is supported, even it is not recommended.
    Thanks,
    Max

    Please check if you have the prerequisites met for NSX integration for VIO.
    Create a Virtual Distributed Switch(s) and add all hosts from both the management and compute clusters.
    On separate VLANs, create three port groups: Management, External, and Public API Network. The fourth port group, VXLAN Transport, is created inline with the NSX installation:
    The Management network carries traffic among the management components.  This network requires 13 or more static IP addresses.
    The Public API network exposes the OpenStack dashboard and provides access for tenants to the OpenStack APIs and services.  This network requires 3 or more static IP addresses.
    The External network provides external access for the instances. This network requires 8 or more static IP addresses.
    The Transport network is used to carry traffic among the instances.  This network requires 1 address for each host in the Edge and Compute clusters
    Note: Some designs you may collapse both the Public API Network and External network into a single network segment.
    -nathan

  • MBAM 2.0 with SCCM Integration: Recovery Audit Reports errors.

    I have installed MBAM 2.0 with SCCM integration according to the following website:
    http://myitforum.com/myitforumwp/2013/06/10/how-to-install-mbam-2-0-with-configmgr-integration/
    Topology:
    SCCM 2012
    SCCM SQL Server
    MBAM Server
    MBAM SQL Server
    Components installed:
    Integration components on SCCM 2012 server
    Compliance and Audit Reports on SCCM SQL Server
    Recovery and Audit Databases on MBAM SQL Server
    Self-Service and Administration Monitoring on MBAM Server
    Everything is running correctly: SCCM sees compliance reports, keys are populating into the Recovery database. Self-service works correctly as tested.
    However, the Recovery Audit Report in the /Helpdesk webpage reports an error:
    "Cannot create a connection to data source 'DataSource1'. (rsErrorOpeningConnection)
    Browsing to the /Reports page on the MBAM SQL server (with reporting) yields an empty page.
    If I install the Audit and Compliance reports onto the MBAM SQL server, those populate (but are empty, as SCCM is handling that component), however, the Recovery Audit Report still yields the same error.
    Ideas?
    Thanks,
    -Patrick

    You can put the Audit Reports on the SSRS instance on SCCM Server. But it has its own limitations. What if you want to configure the encrypted configuration within the MBAM environment using SSL certificate. In that case you have to take special
    care while using the SSL certificate for configuring the reporting Point as it has been also used by the SCCM.
    Gaurav Ranjan
    So, let me get this clear, I can install the Audit Reports onto the SRSS I am using for SCCM and not have to deploy an SRSS instance elsewhere?  The SSL certificate detail is not an issue.  I am desperately trying to avoid yet another instance of
    SRSS.
    Thanks

  • ANN: Spring 1.2 with TopLink Integration Released

    Version 1.2 of the Spring Framework has been released. New in the 1.2 final release is support for TopLink "out of the box". Prior to 1.2, TopLink support was an "add on" that was available on OTN. Now Spring ships with the integration code required to use TopLink as a persistence provider. TopLink 10.1.2 (9.0.4) and 10.1.3 (preview) are supported.
    To get started, try out the Pet Clinic sample app configured to use TopLink.
    NB: Spring doesn't include TopLink; it provides the necessary integration classes. You still need to download both Spring and TopLink.
    - Shaun
    Spring Home page: http://www.springframework.org
    Spring 1.2 Announcement: http://www.springframework.org/node/86

    Version 1.2 of the Spring Framework has been released. New in the 1.2 final release is support for TopLink "out of the box". Prior to 1.2, TopLink support was an "add on" that was available on OTN. Now Spring ships with the integration code required to use TopLink as a persistence provider. TopLink 10.1.2 (9.0.4) and 10.1.3 (preview) are supported.
    To get started, try out the Pet Clinic sample app configured to use TopLink.
    NB: Spring doesn't include TopLink; it provides the necessary integration classes. You still need to download both Spring and TopLink.
    - Shaun
    Spring Home page: http://www.springframework.org
    Spring 1.2 Announcement: http://www.springframework.org/node/86

  • Connect one Business system with two Integration Server

    Hello,
    Can we able to connect one Business System with two Integration Server?
    I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
    I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
    Is this possible ?Is there any work around solution there?
    Thanks.

    Hello ,
    This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14  .
    I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
    Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14  ?
    Thanks.
    Lakshmi
    Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
    Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

  • Problems with accounting integration cProjects

    Dear Sirs,
    I have some problems with accounting integration between my cProjects 3.10 and my ECC 5.0 system. I have followed the steps in the configuration guide as good I as can. However when I create a project, and go the accounting tab I get the following error:
    The project is unknown in Accounting
    Message no.
    DPR_FIN_GECCO006
    Diagnosis
    Etc..
    In the Cockpit for Controlling Integration I can see the following error at the time the project is created, and a new similar error is created when the status is set to released – replicated.
    No company code could be determined. Message No IAOM_CPROJECTS001. 
    In this message there is a reference to the fact that the company code can be set in the assigned model order for CPR1. I have created such a model order with a reference to company code 0100 for CPR1. However this does not seem to do the job.
    I seem to be stuck, as I have tried every possible and unpossible lead to get any further. Any input for someone with the knowhow is highly appreciated.
    Best regards,
    Jørgen Ruud

    Hello Jørgen,
    It sounds strange, normally after create a model order and assigned to the scenario CPR1, then the determination of company code should work.
    logic: CPR1 -> model order -> company code
    Would you please try the note 875275, if it can help.
    In case that it does not help, you can eithter use the Badi method  to set it hardly, or create a customer message to let SAP check it.
    name of Badi DPR_FIN_GECCO_ATTR
    code like following:
          ls_attribute-data_element     = space.
          ls_attribute-value            = '1000'. 
          ls_attribute-field_name_orext = 'BUKRS'.
          ls_attribute-fldname_receiver = space.
          ls_attribute-struc_name_copa  = space.
          ls_attribute-field_name_copa  = space.
          ls_attribute-ext_attr_name    = space.
          ls_attribute-ext_attr_value   = space.
          INSERT ls_attribute INTO TABLE ct_attributes.
    regards!
    Zhenbo

  • Drilldown report with Office Integration

    Hi everyone,
    can anyone help me to understand how to display a report with Office Integration (on monitor) so that you can see the header?
    Thanks,
    Jess.

    Office Integration is available with Report Painter reports.  The first thing that you need to do is make sure the "Expert Mode" is selected.  Once the report is executed select Settings > Options.  In this pop up box you will see the List Output section and the Office Integration section.  We have all the boxes in the List Output section checked. 
    You may also want to check your Text for Export.  When you're in transaction GRR2 (Change mode of the Report Painter report), follow this menu path:  Extras > Report Text > Text for Export.  If you don't have anything here that is why your not getting any header information when you use Office Integration.  You can select Text > Copy from and copy the actual header information into the text for export.
    I hope this helps!

  • What's up with the Integrated Messaging page?  It is slow or inoperable again today.

    What's up with the Integrated Messaging page?  It is slow or inoperable again today.

    What's up with the Integrated Messaging page?  It is slow or inoperable again today.

  • Tables with referential integrity

    Hi All,
    I am generating scripts to insert data from one schema to another. something like this:
    Insert into schemaA.table1
    select *from schemaB.table1;There are many tables with referential integrity in the schema. how can generate the scripts in an order so that there
    won' t be any referential integrity issue....
    Thanks.
    AJR

    Hi,
    Thanks.
    I tried, but it gives me 6 sets of data.
    SELECT TABLE_NAME--, LTRIM(SYS_CONNECT_BY_PATH(TABLE_NAME, '=>'),'=>') TABLE_NAME_PATH,CONSTRAINT_NAME, R_CONSTRAINT_NAME, LEVEL
    FROM   USER_CONSTRAINTS,ALL_OBJECTS B
    --WHERE  LEVEL > 1
    WHERE
    USER_CONSTRAINTS.OWNER = B.OWNER AND
    USER_CONSTRAINTS.TABLE_NAME = B.OBJECT_NAME AND
    B.OBJECT_TYPE = 'TABLE'
    CONNECT BY R_CONSTRAINT_NAME = PRIOR CONSTRAINT_NAME
    ORDER BY TABLE_NAME;AJR

  • Activation of CRM RDS with ERP integration impact on existing ERP configuration

    Hi,
    I'm doing automatic content activation (via Solution Builder) of the CRM RDS solution with ERP integration. The CRM system is a new installation which will linked to an existing ERP system.
    Will the activation of RDS Solution content overwrite the existing configuration in ERP? What is impact of on existing configuration and existing process on ERP?
    Regards,
    SK

    1. The add-on seems to support all new versions of ECC, does this include ECC on HANA ? --> The add-on supports all release of ECC above the base release mentioned in the Integration guide, including ECC on HANA
    2. Is it necessary to backup the environment before installing the add-on ? --> The Add-On does not contain any DB tables. It should not interfere with the ECC environment, so you can install these without any disruption or downtime. As part of general hygiene, you may want to make sure that there is a recent enough backup for the ECC system.
    3. The component seems to be isolated from impacting any ECC functionality and its just for the purpose of integrating C4C with ECC. Would this mean that no regression testing is required in ECC ?
    No regression testing is required for ECC standard functionality. It will not affect existing distribution models. You will have to set up new ones for Cloud for Customer Integration scenarios.
    4. The component doesn't seems to have an uninstall option which would meant that any reverts could only be done through system backup only. Is this accurate ? --> There is no uninstall option.

  • SMSY define ERP system with Process Integration instance

    Hello,
    We have connected new installed ERP system (ERP 6.0 EHP3) to central SLD (SAP SM EHP1).
    But we can see the strange situation.
    SMSY define automatically this ERP system as the system with Process Integration instance but not ECC Server instance.
    We have not installed Usage Type PI in the ERP system.
    Also we have old ERP system in SLD. It is visible as SAP ERP system with ECC Server instance.
    What is the strange behaviour of SMSY? What should we do and how can we correct this definition in SMSY?

    Hi,
    Check what you have selected as "Main Instance" in SMSY under tab Software Components.
    Follow this link.
    http://help.sap.com/saphelp_smehp1/helpdata/en/84/24f94a1ae44a14b83529f5890a6ff5/content.htm
    Hope this helps.
    Feel free to revert back.
    -=-Ragu

  • Status and Tracking system (STS) with BI Integrated Planning ?

    Hi, is posible get some images or demo for show my clients ?
    i am reading Salp Help
    http://help.sap.com/saphelp_nw04s/helpdata/en/b6/92bc7479fb11d5b3df0050dadfb23f/frameset.htm
    and say :
    You can use the BW-BPS Status and Tracking system (STS) with BI Integrated Planning. This is useful if you are already using BW-BPS with the Status and Tracking system but want to use additional functions from BI Integrated Planning.
    What is additional functions from BI Integrated Planning ?
    Is posible write free text in some areas for planning and option for look from high levels ?
    Is posible Insert in the proces STS to <b>"Area Manager"</b> only for look status the Planning (open, in process or finishing) ?
    General manager --> Lock when is finishing.
    <b>Area manager</b>--> only look status the Planning ?
    Submanager of area --> Responsable, Aproval, etc.
    planning1
    planning2
    planning3
    planning4
    planning5
    Submanager of area : Planning TOO.
    Thank you ... This is important info and get some images the last version in STS working in web mode, for my client buy the product.

    Hi Bala ,
    Yes you can use the STS for BI IP also and you need to configure the Planning level and sub plan area and follow the steps to set up STS.
    STS still has BPS flavour and can be used in IP.
    Hope this helps
    Raja

  • Crystal Report 2008 included with SAP integration Kit

    Hi
    We want to know the crystal report 2008  come with SAP integration Kit

    Take a look into the following document:
    http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948
    It might help.

Maybe you are looking for