Apache 2.0.58 JRun4 VirtualHost Problem
I want to have one external IP address for a.my.com and
b.my.com. I am using Apache as a web server and I am starting 2
different JRun servers on 2 different machines. I have done
following configuration at Apache httpd.conf. Note that my JRun
servers are on other machine than Apache. how do i mention proper
DocumentRoot element? It looks for my image files on the Apache
machine instead of from JRun machine. .jsp page loads properly.
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "C:/Program Files/Apache Software
Foundation/Apache2/htdocs2"
ServerName acoms-sql.vistaar.com
ErrorLog logs/error-acoms-sql.log
<IfModule mod_jrun20.c>
JRunConfig Verbose true
JRunConfig Serverstore "C:/temp/acoms-sql/jrunserver.store"
JRunConfig Bootstrap 10.10.4.32:51002
JRunConfig Apialloc false
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .gif .do
</IfModule>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "C:/Program Files/Apache Software
Foundation/Apache2/htdocs2"
ServerName acoms-iis.vistaar.com
ErrorLog logs/error-acoms-iis.log
<IfModule mod_jrun20.c>
JRunConfig Verbose true
JRunConfig Serverstore "C:/temp/acoms-iis/jrunserver.store"
JRunConfig Bootstrap 10.10.4.22:51002
JRunConfig Apialloc false
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc
</IfModule>
</VirtualHost>
Thanks
Suyog
Are these image files in JRun Server? Then you should add
mappings in your web.xml for handling it through JRun. For example
if you want to serve gif files from JRun instead of Apache, then
add the following in web.xml
<servlet-mapping>
<servlet-name>FileServlet</servlet-name>
<url-pattern>*.gif</url-pattern>
</servlet-mapping>
If the Connector is configured for Coldfusion, then you need
to add '.gif' in jrun-handler in httpd.conf additionally.
Similar Messages
-
Apache Process Runner has encountered a problem and needs to close.
I found a problem in tomcat server
Apache Process Runner has encountered a problem and needs to close. We are sorry for the inconvenience.
how can i remove this problem?Jim,
Thanks for all your help. Sure enough, an MOV file works just fine and I may have tracked down the problem: the video, I'm sure caused from the source tape, lags towards the end-it seemed like every time I scrolled towards the end of the AVI it would crash. Still seems mighty peculiar that it would crash the system each time.
Thanks,
Tim S. -
I'm attempting to set up a virtual host in the apache server of the 9ias middle tier. I set up 2 virtual host containers, 1 to handle the normal server, and the second that is the real virtual server. The virtual hosts seem to work correctly except that I cannot get the second virtual host to serve up its default index.htm file. Its going to the main index.htm file that is defined in the main server.
Here's what I've got (this is a local intranet, so no www):
#This is the main server
<VirtualHost pallannarbornet.mw.na.pall.com>
ServerAdmin [email protected]
DocumentRoot D:\ora9ias\Apache\Apache\htdocs
ServerName pallannarbornet.mw.na.pall.com
ErrorLog logs/paaerror_log
CustomLog logs/paaccess_log common
Port 7778
</VirtualHost>
#this is the virtual
<VirtualHost aaxnet.mw.na.pall.com>
ServerAdmin [email protected]
DocumentRoot D:\ora9ias\Apache\Apache\xnet
ServerName aaxnet.mw.na.pall.com
ErrorLog logs/xneterror_log
CustomLog logs/xnetaccess_log xcommon
</VirtualHost>
The reason for the virtual host is to have an extranet accessible by vendors - I don't want them going to the normal company intranet. Anyone got any ideas here?I am having the same problem. I've defined a virtual host (by name) to point to a new web site. Now I get the new website every time regardless of how I point to the server. The default page is no longer accessible by name or IP address.
Anyone have any ideas?
Thanks. -
Weblogic 8.1 SP1 + Apache 2.0.46/44 Plugin Problem
Hi,
Im using apache 2.0.44/46 HTTP Server to proxy request
to my Weblogic 8.1 SP1 server. The HTTP server and
Weblogic server are running on two different machines
in a non clustered environment. I have copied
mod_wl_20.so available in /root/bea/weblogic81/server/lib/linux/i686/
into my apache_home/modules directory. The HTTP Server and the weblogic
server are installed in a linux system. The details of the machines are
as
follows:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Pentium(R) 4 CPU 1.60GHz
stepping : 2
cpu MHz : 1614.399
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8
apic sep mtrr pge mca cmov pat pse36 clflush dts acpi
mmx fxsr sse sse2 ss ht tm
bogomips : 3224.37
My httpd.conf look something like this:
<VirtualHost *>
ServerAdmin [email protected]
ServerName 11.1.14.17
<IfModule mod_weblogic.c>
WebLogicHost WebLogicHost
WebLogicPort 7001
WLLocalIP 11.1.14.18
StatPath true
HungServerRecoverSecs 300
ConnectTimeoutSecs 5
WLLogFile log/weblogic.log
<Location />
DefaultFileName /xyz
WebLogicHost 11.1.14.18
WebLogicPort 7001
SetHandler weblogic-handler
</Location>
<Location /xyz
WebLogicHost 11.1.14.18
WebLogicPort 7001
SetHandler weblogic-handler
</Location>
</IfModule>
</VirtualHost>
After setting this up.. i have restarted the weblogic
server too.
When i try to access the url http://11.1.14.17 i get
the following error in the apache log
[Wed Feb 11 23:49:25 2004] [error] NO_RESOURCES: [os
error=99, line 1440 of ../nsapi/URL.cpp]: bind()
system call failed
The error message shown in the browser is as follows:
Failure of server APACHE bridge:
No backend server available for connection: timed out
after 15 seconds.
Please let me know how to get around this problem. Is
this a problem with the setup.
When i place the apache server in the same system
where my weblogic server is running, it works
perfectly fine.
One more question.. whats the difference between the mod_wl_20.so
available in the server/lib/linux directory and the one available in
the
bin directory?
thanks
-AjayHello
Have you got any solutions to your problem yet? We are getting same kind of problems
with WLS 8.1 SP1 and Apache 2.0.48. If you have any ideas please contact me at
[email protected]
Regards
Tommy Larsen
"Ajay" <[email protected]> wrote:
>
Hi,
Im using apache 2.0.44/46 HTTP Server to proxy request
to my Weblogic 8.1 SP1 server. The HTTP server and
Weblogic server are running on two different machines
in a non clustered environment. I have copied
mod_wl_20.so available in /root/bea/weblogic81/server/lib/linux/i686/
into my apache_home/modules directory. The HTTP Server and the weblogic
server are installed in a linux system. The details of the machines are
as
follows:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Pentium(R) 4 CPU 1.60GHz
stepping : 2
cpu MHz : 1614.399
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8
apic sep mtrr pge mca cmov pat pse36 clflush dts acpi
mmx fxsr sse sse2 ss ht tm
bogomips : 3224.37
My httpd.conf look something like this:
<VirtualHost *>
ServerAdmin [email protected]
ServerName 11.1.14.17
<IfModule mod_weblogic.c>
WebLogicHost WebLogicHost
WebLogicPort 7001
WLLocalIP 11.1.14.18
StatPath true
HungServerRecoverSecs 300
ConnectTimeoutSecs 5
WLLogFile log/weblogic.log
<Location />
DefaultFileName /xyz
WebLogicHost 11.1.14.18
WebLogicPort 7001
SetHandler weblogic-handler
</Location>
<Location /xyz
WebLogicHost 11.1.14.18
WebLogicPort 7001
SetHandler weblogic-handler
</Location>
</IfModule>
</VirtualHost>
After setting this up.. i have restarted the weblogic
server too.
When i try to access the url http://11.1.14.17 i get
the following error in the apache log
[Wed Feb 11 23:49:25 2004] [error] NO_RESOURCES: [os
error=99, line 1440 of ../nsapi/URL.cpp]: bind()
system call failed
The error message shown in the browser is as follows:
Failure of server APACHE bridge:
No backend server available for connection: timed out
after 15 seconds.
Please let me know how to get around this problem. Is
this a problem with the setup.
When i place the apache server in the same system
where my weblogic server is running, it works
perfectly fine.
One more question.. whats the difference between the mod_wl_20.so
available in the server/lib/linux directory and the one available in
the
bin directory?
thanks
-Ajay -
Apache Roller (or mayb Struts 2) problem on Tomcat 5.5.20 on Debian Etch
Firstly I'm not at all sure whether this is the right forum for asking for help on this issue. People here have been very helpful in the past. If this post is in the wrong place, my apologies and please feel free to move it.
I am trying to install Apache Roller 4.0 on a Debian Etch system that has the Apache Tomcat 5.5 package installed. I am using the Sun Java package as well. You might think the solution to this problem might be better sought in the Apache Roller community or the Debian community. However the problem I am experiencing is a far more general Java problem (I think).
h1. Software versions
java version "1.5.0_10"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_10-b03)
Java HotSpot(TM) Client VM (build 1.5.0_10-b03, mixed mode, sharing)Tomcat 5.5.20 (Debian Etch package)
Apache Roller 4.0
h1. The error
When I load up the application for the first time, following the Apacher Roller instructions for installation I get a bunch of IllegalAccessExceptions that AFAIK should not happen. An example is in the exception trail below.
h2. Exception trail.
ERROR 2007-12-30 11:31:25,476 StandardWrapperValve:invoke - Servlet.service() for servlet jsp threw exception
Caught OgnlException while setting property 'location' on type 'org.apache.struts2.views.tiles.TilesResult'. - action - file:/vhost/beanlogic.co.uk/roller/WE
B-INF/classes/struts.xml:129:77
at com.opensymphony.xwork2.DefaultActionInvocation.createResult(DefaultActionInvocation.java:199)
at com.opensymphony.xwork2.DefaultActionInvocation.executeResult(DefaultActionInvocation.java:342)
at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:253)
at com.opensymphony.xwork2.interceptor.DefaultWorkflowInterceptor.doIntercept(DefaultWorkflowInterceptor.java:221)
at com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:86)
at com.opensymphony.xwork2.DefaultActionInvocation$2.doProfiling(DefaultActionInvocation.java:224)
at com.opensymphony.xwork2.DefaultActionInvocation$2.doProfiling(DefaultActionInvocation.java:223)
at com.opensymphony.xwork2.util.profiling.UtilTimerStack.profile(UtilTimerStack.java:455)
at com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:221)
at com.opensymphony.xwork2.validator.ValidationInterceptor.doIntercept(ValidationInterceptor.java:150)
at org.apache.struts2.interceptor.validation.AnnotationValidationInterceptor.doIntercept(AnnotationValidationInterceptor.java:48)
//(there is a large stack trace here which probably not relevant so I cut it out. The caused by is next)
Caused by: Caught OgnlException while setting property 'location' on type 'org.apache.struts2.views.tiles.TilesResult'. - Class: ognl.OgnlRuntime
File: OgnlRuntime.java
Method: invokeMethod
Line: 508 - ognl/OgnlRuntime.java:508:-1
at com.opensymphony.xwork2.util.OgnlUtil.internalSetProperty(OgnlUtil.java:367)
at com.opensymphony.xwork2.util.OgnlUtil.setProperties(OgnlUtil.java:76)
at com.opensymphony.xwork2.ObjectFactory.buildResult(ObjectFactory.java:222)
at com.opensymphony.xwork2.DefaultActionInvocation.createResult(DefaultActionInvocation.java:195)
... 287 more
Caused by: java.lang.IllegalAccessException: Method [public void org.apache.struts2.dispatcher.StrutsResultSupport.setLocation(java.lang.String)] cannot be a
ccessed.
at ognl.OgnlRuntime.invokeMethod(OgnlRuntime.java:508)
at ognl.OgnlRuntime.callAppropriateMethod(OgnlRuntime.java:812)
at ognl.OgnlRuntime.setMethodValue(OgnlRuntime.java:964)
at ognl.ObjectPropertyAccessor.setPossibleProperty(ObjectPropertyAccessor.java:75)
at ognl.ObjectPropertyAccessor.setProperty(ObjectPropertyAccessor.java:131)
at com.opensymphony.xwork2.util.OgnlValueStack$ObjectAccessor.setProperty(OgnlValueStack.java:68)
at ognl.OgnlRuntime.setProperty(OgnlRuntime.java:1656)
at ognl.ASTProperty.setValueBody(ASTProperty.java:101)
at ognl.SimpleNode.evaluateSetValueBody(SimpleNode.java:177)
at ognl.SimpleNode.setValue(SimpleNode.java:246)
at ognl.Ognl.setValue(Ognl.java:476)
at com.opensymphony.xwork2.util.OgnlUtil.setValue(OgnlUtil.java:186)
at com.opensymphony.xwork2.util.OgnlUtil.internalSetProperty(OgnlUtil.java:360)
... 290 moreAny help would be great.
Cheers
ElwynHave you resolved your problem? I am running into the SAME EXACT issues with my application. The only difference is I'm not deploying to webapps/ROOT/; I'm deploying to my own directory based on my WAR file name (webapps/<web_application_name>/WEB-INF....blah blah). If you figured out your problem (believe me, I wish I could be of some help) I would LOVE to hear what you did/figured out.
-C -
Io Exception connecting to Oracle from apache-tomcat-6.0.14 - weird problem
Hi all,
I'm in a desperate situation here. Trying to solve this problem for a week now. I have searched all over the internet but coul not find any solution. I developed an application using netbeans 5.5.1 with VWD pack and it works fine. The application accesses an oracle db on another server which works fine on my development machine. Now I deployed to oracle 9i and apache-tomcat-6.0.14 on a solaris machine and encountered this error :
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
on further troubleshooting I tried this code on the server.
java.sql.DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
java.sql.Connection conn = java.sql.DriverManager.getConnection("jdbc:oracle:thin:@servername:1521:sid", "username", "pswd");
and it works alright. The connection was established wothout error.
But when I try
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
javax.naming.Context init new javax.naming.Context();
javax.naming.Context ctx = (javax.naming.Context)init.lookup("java:comp/env");
javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup("jdbc/dataSource");
java.sql.Connection conn = ds.getConnection();
I still get the same io Exception error.
Now I need to fetch the values from the context file, because my application uses :-
CachedRowSetXImpl portal_tabsRowSet= new CachedRowSetXImpl();
CachedRowSetDataProvider portal_tabsDataProvider= new CachedRowSetDataProvider();
as follows :-
portal_tabsRowSet.setDataSourceName("java:comp/env/jdbc/dataSource");
portal_tabsRowSet.setCommand("SELECT * FROM PORTAL_TABS");
portal_tabsRowSet.setTableName("PORTAL_TABS");
portal_tabsDataProvider.setCachedRowSet((javax.sql.rowset.CachedRowSet)getValue("#{SessionBean1.portal_tabsRowSet}"));
here is my context.xml
<Context path="/AppPortal">
<Resource auth="Container" driverClassName="oracle.jdbc.driver.OracleDriver" m
axActive="20" maxIdle="10" maxWait="-1" name="jdbc/dataSource" password="pswd" ty
pe="javax.sql.DataSource" url="jdbc:oracle:thin:@servername:1521:sid" username="username"/>
</Context>
here is my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"><context-param><param-name>javax.faces.STATE_SAVING_METHOD</param-name><param-value>server</param-value></context-param><context-param><param-name>javax.faces.CONFIG_FILES</param-name><param-value>/WEB-INF/navigation.xml,/WEB-INF/managed-beans.xml</param-value></context-param><context-param><param-name>com.sun.faces.validateXml</param-name><param-value>true</param-value></context-param><context-param><param-name>com.sun.faces.verifyObjects</param-name><param-value>false</param-value></context-param><filter><filter-name>UploadFilter</filter-name><filter-class>com.sun.rave.web.ui.util.UploadFilter</filter-class><init-param><description>
The maximum allowed upload size in bytes. If this is set
to a negative value, there is no maximum. The default
value is 1000000.
</description><param-name>maxSize</param-name><param-value>1000000</param-value></init-param><init-param><description>
The size (in bytes) of an uploaded file which, if it is
exceeded, will cause the file to be written directly to
disk instead of stored in memory. Files smaller than or
equal to this size will be stored in memory. The default
value is 4096.
</description><param-name>sizeThreshold</param-name><param-value>4096</param-value></init-param></filter><filter-mapping><filter-name>UploadFilter</filter-name><servlet-name>Faces Servlet</servlet-name></filter-mapping><servlet><servlet-name>Faces Servlet</servlet-name><servlet-class>javax.faces.webapp.FacesServlet</servlet-class><load-on-startup> 1 </load-on-startup></servlet><servlet><servlet-name>ExceptionHandlerServlet</servlet-name><servlet-class>com.sun.errorhandler.ExceptionHandler</servlet-class><init-param><param-name>errorHost</param-name><param-value>localhost</param-value></init-param><init-param><param-name>errorPort</param-name><param-value>24444</param-value></init-param></servlet><servlet><servlet-name>ThemeServlet</servlet-name><servlet-class>com.sun.rave.web.ui.theme.ThemeServlet</servlet-class></servlet><servlet-mapping><servlet-name>Faces Servlet</servlet-name><url-pattern>*.jspx</url-pattern></servlet-mapping><servlet-mapping><servlet-name>ExceptionHandlerServlet</servlet-name><url-pattern>/error/ExceptionHandler</url-pattern></servlet-mapping><servlet-mapping><servlet-name>ThemeServlet</servlet-name><url-pattern>/theme/*</url-pattern></servlet-mapping><session-config><session-timeout>5</session-timeout></session-config><welcome-file-list>
<welcome-file>JSCreator_index.jsp</welcome-file>
</welcome-file-list><error-page><exception-type>javax.servlet.ServletException</exception-type><location>/error/ExceptionHandler</location></error-page><error-page><exception-type>java.io.IOException</exception-type><location>/error/ExceptionHandler</location></error-page><error-page><exception-type>javax.faces.FacesException</exception-type><location>/error/ExceptionHandler</location></error-page><error-page><exception-type>com.sun.rave.web.ui.appbase.ApplicationException</exception-type><location>/error/ExceptionHandler</location></error-page><jsp-config><jsp-property-group><url-pattern>*.jspf</url-pattern><is-xml>true</is-xml></jsp-property-group></jsp-config><resource-ref><description>Creator generated DataSource Reference</description><res-ref-name>jdbc/dataSource</res-ref-name><res-type>javax.sql.DataSource</res-type><res-auth>Container</res-auth></resource-ref></web-app>
This is really strange to me.
Please help!I haven't studied your problem in detail and don't actually use Tomcat 6, but in earlier versions of Tomcat the handling of JNDI leaves a lot to be desired. If you search this forum for posts about Tomcat and JNDI, you will find some useful information.
One thing I found was that you really need to use the context.xml file in your Meta-inf directory, putting the datasource anywhere else gets into one kind of trouble or another. I tried using server.xml, a context file for the application and the web-inf file. -
Apache cluster down because of sharedaddress problem
Hi,
I had a problem in my 2-node + QS cluster that, the apache service resource going offline on both the nodes. I could find Probe timeout for the apache resource in /var/adm/messages. The sharedaddress resource is online on node 1 and offline on node 2. The cluster was online, and my apache resource was working properly, and all of the sudden this probelm arised and the apache resource went offline on both nodes
Then I made the sharedaddress resource offline. After offlining, when I do the ifconfig -a i could see the shared ip address is shoing up on interface lo0:1 on both the nodes!!!!!!!!!!!!!!!!!!!
I unplumberd the lo0:1 on both nodes, and made the shared address resource online. It shows online on clrg status on node 1, and ifconfig -a showd bge3:1 with the shared address on node 1 and nothing (no shared ip) on node 2.
After I shutdown the cluster (cluster shutdown) and startup both nodes, it came up as normal. Apache is also online on both nodes !!!!!!!!!
Any clue?Hi,
If it was a non-existing problem, why were the appache resource offline on both nodes?. In a "CLUSETR", even if the apache resource is offline due to any reason, the resource must be running on the other node . !!! In my case , I was not able to access my web page !!! The whole cluster is down. There were no configuration change, nobody has even logged in to the servers. For sure there was something which made the apache resource down. It cant be with apache, cos both nodes cant have the same problem at the same time. Thats why I thought it might be a problem with the shared address...
I couldn't even rectify the problem by restarting both the shared address resource group and the apache resource group. All what saved me was the total shutdown of the cluster and restart. !!!!!!
Thanks
Ushas Symon -
Apache 2, Tomcat 5, mod_jk2 configuration problem
I am setting up a Web Server on a RedHat Enterprise Linux box. I installed the RedHat Application Server that installs Apache 2, Tomcat 5 and Mod_JK2. I can't get the mod_jk2 configured properly. I've searched the internet and haven't found any documentation that will work with this.
I need to know how to configure the mod_jk2 with Apache2 and Tomcat 5.
PLEASE HELP!!! Nothing I've tried from the Internet has helped. The best site that I've found is ::
http://www.johnturner.com/howto/apache2-tomcat4127-jk-rh9-howto.html
but its for tomcat 4 so it doesn't work for me.
Has anyone does this before that can help me????
Thanks in advance.Ended up downloading and installing the mod_jk instead of the mod_jk2 that came with RedHat Application Server.
-
Apache 2.2.9 and suexec problem
After todays update all my apache installment went crazy. I started to receive suexec errors while before everything was working fine. First thing that have changed since was default http user/group. Before it was nobody/nobody. After update it is http/http. After fixing that in httpd.conf I'm stuck at this error:
[2008-07-14 12:00:56]: uid: (1000/someuser) gid: (100/users) cmd: php-cgi.sh
[2008-07-14 12:00:56]: command not in docroot (/home/someuser/public_html/php-cgi.sh)
I've tried to put php-cgi.sh script in different places without any luck.
What's the default suexec docroot value compiled in Archlinux installment?
What's the best way to use suexec after latest update?
TIAgrocal wrote:What's the default suexec docroot value compiled in Archlinux installment?
/srv/http
I have found out while browsing CVS for apache in Archlinux repo...
EOT -
Apache and WebDB for Linux - AUTHENTICATION PROBLEM
I have WebDB on a Linux box (redhat 6) and I 'd like to run
Apache as interface to an Oracle 8i (linux) database.
I did all requested configuration tasks and it works, but it
cannot connect to oracle database because it gets an
authentication failure (it seems browser postes a NULL value in
Userid and Password fields).
Can anyone help me please ?
thanks
Fabrizio
nullWe are testing webdb for linux and it's great !
More stable than NT/2K.
Install one DB Server, after it the webdb.
Just download, rapdily read de install guide, and start to work.
We are trying now 9iAS. It's more complete than WebDB, int truth
Oracle Portal (old webdb) is now part of 9iAS.
Start using it !
Minoru. -
Re: Weblogic 8.1 SP1 + Apache 2.0.46/44 Plugin Problem
Have you ever get this resovled? I have a similar problem but my error was 'CONNECTION
REFUSED'.
I appreciated any inputs.
Thank you.Concerning CONNECTION REFUSED problems, it may come from the Accept backlog. You should try to increase the value of this parameter on your weblogic server.
Rgds. -
Dear Experts,
I was wondering if anyone could kindly help me. I have an Oracle Database installed on my pc and with installation Apache was also installed. The problem I have is I cannot access the web server. I am using Windows XP. From windows if I go to start and then choose the programs I have installed, under Oracle there is an option called "Oracle HTTP Server". If I click on that folder I have the following options to choose from:
Stop HTTP Server powered by Apache
Start HTTP Server powered by Apache
If I choose the either option a command promt window opens with the following message:
===============================================================
fopen: No such file or directory
Apachie.exe: could not open document config file e:/oracle/ora92/xdk/admin/xml.conf
Note the errors or messages above, and press the <ESC> key to exit. 26...
===============================================================
I have tried to open the above path by using START >> RUN but am given an error message telling me the file doesnt exist. On my machine I am running IIS on my localhost port 80. I thought maybe when Apache was installed there may be a problem with a conflict on port 80. So I changed the port number of IIS and tried to run the localhost hoping apache would open. However that didn't work.
I also downloaded Apache again and installed it hoping the problem would be solved. After I done this in Windows a new window called "Apachie Service Monitor" was installed. When I open this what I see is the following:
=============================================================
Service Status:
- OracleOraHome92HTTPServer
The OracleOraHome92HTTPServer is starting.
=============================================================
In this window I have the following options:
OK, Start, Services and Connect
If I press "Start" I get an error message window - "The request Operation has failed"
If I press "Services" The services window in Contol Panel/Administrative Tools/Services opens.
I really dont know what to do. I have run out of ideas. I would be greatful if someone could kindly help me. What do I do to rectify this problem? What I want is basically Apache working and assign it a port eg 90. So if I typed in "localhost:90" in my webrowser the Apache webserver homepage would open.
I really do hope someone could kindly help me.
I look forward to all replys
Thanks
Kindest Regards
M.AhmadFirst, I thank you for your notice.
In fact, I installed the JRE (j2re-1_4_2_10-windows-i586-p.exe)on that PC only.
Also, I cannot find the checkbox that give the rights for all users during the jre installing process.
However, even I login as normal user,I can execute a simple java class(just print the words "Hello World") in command prompt.
The only thing is that we have some web pages which contain a java applete.The browser show a "X" only when I login as normal user.
Moreover, I cannot open the java console in IE.
However, it works fine when I login as administrator.
Message was edited by:
normal -
CVE-2007-1862 vulnerability - problem with Apache mem_cache.
I have a problem with CVE-2007-1862, which is an Apache mem_cache vulnerability. Even though my Snow Leopard machine is currently running Apache 2.2.17 and the problem supposedly went away with a much earlier version, the problem has not gone away. By the way, this machine also has Java Update 24 on it, while a similarly configured Snow Leopard machine does not have it (and the Filemaker Pro Admin Console still works on that one).
Anyway, I am hoping that installing Apache 2.2.18 in a Software update will take care of this problem.
Does anyone know when Apache 2.2.18 will be in a Software Update?Your parameter db_recovery_file_dest look strange
db_recovery_file_dest = I:\oracle\product\10.2.0/flash_recove db_recovery_file_dest_size= 10737418240
Did you put a slash (/) instead of a backslash (\) ?
You're saying "can´t enter this the SYS user"
It could be your log_archive_dest that is full.
Do you get an error message? -
Apache reverse proxy setting for access to Backend
Hi experts,
we have set up apache reverse proxy to make available our NW portal (and SRM functions)over the internet.
Our settings look something like this:
ProxyRequests Off
<VirtualHost *:80>
ServerName myportal.portalhosto.com
ProxyPreserveHost On
ProxyPass /irj/ http://myportal.portalhost.com:53200/irj/
ProxyPass /webdynpro/ http://myportal.postalhost.com:53200/webdynpro/
ProxyPassReverse /irj/ http://myportal.portalhost.com:53200/irj/
ProxyPassReverse /webdynpro/ http://myportal.portalhost.com:53200/webdynpro/
ErrorLog logs/myportal.portalhost.com-error.log
CustomLog logs/myportal.portalhost.com-custom.log combined
RewriteEngine On
RewriteRule ^/sap/(.*)$ http://mybackend.backendhost.com:8020/sap/$1 [P,NC]
</VirtualHost>
Problem:
when we access the portal from the internal network(either by using the internal URL or external URL) things work fine.
But we access the portal from internet, we are able to login to the portal and acess all webdynpro Java related applications.But when we try to acess the BSP/WD abap application running on a backend SRM system, we get 'host not found' message with the INTERNAL url of the SRM backend application displayed.
Do we need to expose the SRM backend to the outside world via reverse proxy as well?If yes,how?Do we need to change the system definitions in portal for that?
Any help in resolving this would be greatly appreciated.
regards,
KiranHi,
Do we need to expose the SRM backend to the outside world via reverse proxy as well?If yes,how?Do we need to change the system definitions in portal for that?
Yes , you have to expose your backend system using reverse proxy ...
When user access the portal and when he clicks on BSP/WD , the URL get re-directed to backend system.
But , as your backend system is not expose on internet , you get an error as host not found.
So, to solve your problem you have to expose your backend system on internet. It is in general pratice to expose on internet.
Thanks
Anil -
Problem in download file from FTP server
Hi
I want to download a file from FTP server for that i am using the apache FTP module but i am not getting how to download a file with that api i can dispaly the list of files and folders but not able to download the file or folder can any one help me in this
Thanks
NinadHi
I think you miss understood something I am writing a program to download the file in Java where i have used the jakarta.apache api for that and getting problem in that bellow is the code where I have written to print the directory & file names but I don't know how to download the file
FTPClient ftpConnection = new FTPClient();
ftpConnection.connect(host);
ftpConnection.login(FTPConnection.userName,FTPConnection.password);
FTPFile fileList[] = ftpConnection.listFiles();
for(int i=0;i<fileList.length;i++)
System.out.println(fileList.getName());
thanks
Ninad
Maybe you are looking for
-
SRM7 grouping items in RFx despite of multiple delivery date and locations
Hi Gurus, I need to know for a proposal of SRM 7 implementation, WITHOUT the newest E-sourcing component, how to solve the following scenario: We are gonna use the SRM7 classic scenario where PO is created in ERP and Shopping cart is created in SR
-
What hardware should I use for TTL synchronization?
I am searching for a hardware recommendation. Here's what the hardware should do: notify a PC program to run a subroutine upon detection of a TTL pulse (digital input change). So I need one 1-bit digital input, and the device should communicate with
-
When I attempt to use a clickable link..such as in a email that says "click here" I get a error message. I know there must be some setting I am not seeing.
-
VALUE NOT PASSING FROM 1 PAGE TO OTHER PAGE ?
Hi friends I have bsp application with 3 htm pages. I have a input value in first page like i_matnr. If i give input material no its valu is coming in second page. But its not coming in 3rd page.So what i have to do? Moosa
-
Error en traslado IVA diferido
Hola: el programa RFUMSV50 no nos genera los documentos SA de traslado de IVA diferido si el documento original factura tiene dos tipos de IVA, falla en la FB05 al seleccionar partidas ya que selecciona todas las que tiene para el mismo documento y c