VALUE NOT PASSING FROM 1 PAGE TO OTHER PAGE ?

Hi friends
I have bsp application with 3 htm pages.
I have a input value in first page like i_matnr.
If i give input material no its valu is coming in second page.
But its not coming in 3rd page.So what i have to do?
Moosa

Hi:
you should put like
in page attribute,
declare matnr
and in oninputprocessing or at where you have put your query.
matnr = request->get_form_field( 'matnr' ).
Regards
Shashi

Similar Messages

Values not passing from program to Layout

Hi Abaper's
My requirement is I need to set company logo in Invoice ( VF03 ) if a particualar condition satisifies, for this I have set a FLAG in my
driver program and called the FLAG in my Script Layout.
Here my issue is, for certain invoices the FLAG set in the program is being called in the Layout and Logo is displayed in invoice copy ( when excuted both in foreground and back ground).
But in certain invoices, if run in foreground none of the values ( means not only flag but also all the values to be passed to layout)
is displayed in invoice. It is only displaying the hard coded values in the layout ( showing blank page ).
and if I run in background all the values are passing to layout except all Global Variables (flags) in the program even though it
has value in the program.
Please advice what should be the problem, I have checked with my Functional and it seems to be fine in customization part.
Karthik
Edited by: Karthik R on Sep 21, 2010 2:42 PM

Hi Tamas,
I have tried it, but still not able to figure out the exact problem....since while running in background or foreground some of the all values including my logo are displayed in invoice but for some invoices none of the values from driver prgram is getting passed to layout while running in forground....but when run in background all values are passing except the FLAG set in the drvier program.
what should be the reason for this ? for some invoices all the values from driver is passing to layout but for some cases its not passing

Field Value not passed from IDOC (orders01) to File Generated

Hi All,
I have added a custom field to a PO at item level (ekpo-Ztest)and Passing it to OUTBOUND IDOC.
In process of passing to IDOC(ORDERS01) i mapped the field to segment E2EDP19001-MFRPN and i see the value in the IDOC when i view it in WE02.
The problem is when i generate a file i don't see the value of E2EDP19001-MFRPN
We are already using QUALF,IDTNR,KTEXT of E2EDP19001 and i see all the values of these fields being passed from IDOC to file generated .
Let me know as i'm missing anything in here
I quick note ,
I see 3 version for E2EDP19 Segment for orders01
Vesrion
002     E2EDP19002                             8     242     02/14/2005
001     E2EDP19001     40A                    5     160     08/19/1997
000     E2EDP19             30A                     3     108     04/03/1995
1)The version 000 and 001 are released but not 002 Version
2)May be i 'm using version 000 and its out put length is only 108 and these fields(QUALF,IDTNR,KTEXT) together occupy 108 and there is no room for my new field but My IDOC dispalys E2EDP19001 and E2EDP19002 and also it displays my new field but its the output file generated that doesn't show the value
Thanks

Resolved Myself
Thanks

Values not passing from form to context attributes (value attributes)

Hi Experts,
I have bound the properties of theadobe interactive form (WD-Java) to the context attributes but the values are not passing to the value attributes at runtime.
For your information I have not bound the pdfsource binary attribute of the view to the custom controller pdfsource binary attribute.
Please advise.
Thanks,
Shobhit

Context
   GetData - ModelNode mapped to controller context (DataSource)
         Attribute1 - Value Attribute (Form Field)
Is it allright to have the Data Source as a ModelNode (mapped to the controller context node) and then have Value Attributes under the ModelNode which are then bound to the adobe form input fields.
I know its frustrating to advise on such questions without looking at the code actually. But I would definitely need your support.
If possible could you mail me a project of yours where you have the form being PREFILLED with some values coming from a RFC FM and then the same form gets posted to SAP though another RFC FM.
Thanks,
[email protected]
OK. When I create a Fresh Adobe Interactive Form application, it works fine.
The problem Im facing is in the case, when Im using an existing PDF file created in the ABAP stack (TCode SFP). I am importing this PDF file into the WebDynpro Java Application and then binding the fields. So in this case the context binding does not work.
You guyz are right, I need to check if there is any other script which exists. But still what are views after this update?
Message was edited by:
        Shobhit Swarup Mathur

Do not pass from sign in page

I down loaded Elements 12, it is installed but do not open. Do not pass from sign in page. I have windows 8 OS.

Hi Jeff. Yes, I was prompted to enter my Adobe ID, after that the program did not continue. It only show a little circle spinning on the lower right. But after 5 minutes it still was spinning.
De: Jeff A Wright [email protected]
Enviado el: martes, 10 de diciembre de 2013 11:57 a. m.
Para: panamito
Asunto: Do not pass from sign in page
Re: Do not pass from sign in page
created by Jeff A Wright <http://forums.adobe.com/people/JeffAWright> in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5917358#5917358

Page 4 of 6 of the actual library storing apps has frozen; effects all apps on that page-all other pages are fine and accessible just not the apps on this page; wont even toggle and give the option to delete when i hold down on a an app. Any ideas?

Page 4 of 6 of the actual library storing apps has frozen; effects all apps on that page-all other pages are fine and accessible just not the apps on this page; wont even toggle and give the option to delete when i hold down on a an app. Any ideas?

this is similar to your question.just go-through it or if you stuck then reply back for more info on this problem : https://support.mozilla.org/en-US/questions/974711

Unable to detect any parameter in html (webresource) when value is passed from onload method of form

Unable to detect any parameter in html (webresource) when value is passed from onload method of form
I am trying out some stuff. For which I created a simple Entity. In the form of the entity I have added a simple web resource (html). And for the onload of the form I am calling the following function
function HelpDeskActivityOnLoadhandler()
var customParameters = encodeURIComponent("first=First Value&second=Second Value&third=Third Value");
    Xrm.Utility.openWebResource("tsi_scriptzz",customParameters);
Here is the code for the tsi_scriptzz.html
<html>
<body>
  <script type="text/javascript">
    var vals = new Array();
    if (location.search != "") {
     vals = location.search.substr(1).split("&");
     for (var i in vals) {
      vals[i] = vals[i].replace(/\+/g, " ").split("=");
  </script>
</body>
</html>
MY PROBLEM IS -> location.search is always coming back with empty string. So, it not getting the parametrs I am passing from the load method of the form.
Could someone kindly help me.
Thanks,
Hasib

Hello, I tried it myself. I got a new_test.htm file and a new_test.js file. The loadWebResource function is called on the OnLoad event of an Entity.
function loadWebResource()
var params = encodeURIComponent('param1=value one&param2=value two&param3=value three');
Xrm.Utility.openWebResource('new_test.htm', params);
<html>
<head>
<title>Web Resource Parameter Example</title>

<script src="ClientGlobalContext.js.aspx" type="text/javascript"></script>
<script type="text/javascript">
document.onreadystatechange = function () {
if (document.readyState == 'complete') {
var params = getParams();
for(var i=0; i<params.length; i++)
log(params[i].name + ' ' + params[i].value);
// this functions puts the params in a 'dictionary format'
// f.e params[0].name = param1 & params[0].value = 'value one'
// You could customize this function or find some on the internet to retrieve a param fe by name...
// This is just an example how to get the name and values
function getParams(){
var params = [];
var querystring = Xrm.Page.context.getQueryStringParameters().Data;
var querystringparts = querystring.split('&');
for(var i=0; i<querystringparts.length;i++)
var split = querystringparts[i].split('=');
params.push({
name: split[0],
value: split[1]
</script>
</head>
<body>
</body>
</html>
Hope it helps now. Kind Regards

Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

Hi,
Did the issue happen only for you or for multiple users?
Make sure phone update to the latest firmware.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Value not passing urgent

data:l_lotno like /JJVC/ERR851-master_lot_num,
        l_batno like mchb-charg.
loop at i_inv_data into wa_inv_data.
    l_batno = wa_inv_data-charg+0(1).
    if l_batno ca SY-ABCDE.
      translate l_batno to upper case.
      l_lotno = wa_inv_data-charg.
      perform f_idoc_851.
      perform f_idoc_52 .
      perform f_idoc850.
    else.
      if wa_inv_data-charg na SY-ABCDE
        and wa_inv_data-werks eq c_us11.
        l_lotno = wa_inv_data-charg+0(6).
        perform f_idoc_851.
        perform f_idoc_52 .
        perform f_idoc850.
      endif.
    endif.
endloop.
data:l_lotno like /JJVC/ERR851-master_lot_num,
       l_batno like mchb-charg.
IF p_werks EQ c_us11.
    SELECT   a~docnum    "doc number
             b~credat    "creation date
             b~status    "status of idoc
             b~statxt    "last error message
             FROM /jjvc/err851 AS a INNER JOIN edids AS b
             ON adocnum = bdocnum
             INTO TABLE i_idoc_error
             WHERE a~master_lot_num eq l_lotno
             AND werks EQ p_werks.
    IF sy-subrc <> 0.
    ENDIF.
the data in l_lotno and l_batno is not passing from the above if condition to the select statement can any one help me in this.

You have to declare the l_lotno and l_batno as global variables.
here they are local variables and their scope is withing the block in which they are defined.
Declare them outside the blocks(Performs etc)
Regards,
Ravi

My iTune Match does not pass from step 1

My iTunes Match does not pass from step 1. Every time I start it I get an error msg (4010). Does anybody knows whats the problem?

There is a robust discussion about this here:
https://discussions.apple.com/message/18858414?ac_cid=tw123456#18858414

Some notes disappeared from iphone, and others are not synchronizing on ipad, mac, and iphone. What to do?

Some notes disappeared from iphone, and others are not synchronizing on ipad, mac, and iphone. What to do?

Hi, MPiaM.
Thank you for visiting Apple Support Communities.
I would need clarification on if you are experiencing an issue with syncing photos via iTunes or iCloud to provide a better answer. However, here are a couple troubleshooting articles that cover both scenarios.
iTunes: Unable to sync photos
http://support.apple.com/en-us/TS3697
Get help using My Photo Stream
http://support.apple.com/en-us/HT203511
-Jason H.

Need help in passing data from one page to other page in oaf

Dear All,
I have a requirement as below.
I am doing some selection in one page and populating the data in another page table region, next time when i am selecting another row and pressing the button i need to display the previous row as well as new row, how can i achieve this, currently i am able to see only the first row what i selected first.
Ex: 1 st scenario: after passing the selected data from one page to base page the data looks like below in base page.
1 test desc
2nd scenarios: when i am again selcting data and passing to the base page it should be like that
1 test desc
2 test desc
but currently it is showing
1 test desc only for the 2nd case, can any one please help me on thsi , its little bit urgent
Thnaks

How are you passing the values to the base page? Are you using setting the retainAM parameter to true while doing a forward.

Workbooks not opening from a Business Server Page (BSP)

Hello Experts,
I need help with opening workbooks from a Business Server Page (BSP). The problem is that the workbook is not opening, but instead a blank Excel page opens. I am using Microsoft Excel 2003 and on BI 7.0 version. Here is the code: Could you please look at the below code and advice me. This does not have any selection screen. Also, i have another workbook with a selection screen and I want to pass values to these selection variables. Is that possible? In the below code, my suspicion is either with 'application/vnd.ms-excel' or moving content in to X string. Please give your suggestion. Thanks so much.
Layout
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2002+design2003" >
<htmlb:page title="Web Workbook LaunchPad" >
</htmlb:page>
</htmlb:content>
In page attributes:
file_content TYPE STRING
FILE_XCONTENT TYPE XSTRING
WA_WBDATA TYPE RSRWBSTORE
WBDATA TYPE RSR_RPEC_BIN_FILE
WBID TYPE RSSGUID25
On Initialization.
refresh wbdata .
clear: file_content .
data: temp_string type string .
select * from rsrwbstore into table wbdata
where workbookid = 'VXXGCMF53EVQAS7U8UA80OXN7'.
if not wbdata[] is initial .
loop at wbdata into wa_wbdata.
clear temp_string .
temp_string = wa_wbdata-clustd .
concatenate file_content temp_string into file_content .
endloop.
clear file_xcontent .
file_xcontent = file_content .
response->set_header_field( name = 'content-type'
value = 'application/vnd.ms-excel' ).
some Browsers have caching problems when loading Excel format
response->delete_header_field( name =
if_http_header_fields=>cache_control ).
response->delete_header_field( name =
if_http_header_fields=>expires ).
response->delete_header_field( name =
if_http_header_fields=>pragma ).
*start Excel viewer either in the Browser or as a separate window
response->set_header_field(
name = 'content-disposition'
value = 'attachment;filename=webforms.xls' ).
response->set_cdata( data = file_content ).
finally display Excel format in Browser
data: l_len type i.
l_len = xstrlen( file_xcontent ).
response->set_data( data = file_xcontent
length = l_len ).
navigation->response_complete( ).
endif .

Hi Friend,
have a loook at the below specified threads.Hope it will help you.
[link1|download to excel in diffrent window;
[link2|Re: Exporting data from table to Excel in a particular format using BSP.]
[link3|download to excel in diffrent window]
With Regards,
SHARMILA BRINDHA.M

How to "Add" a combo key of 3 fields from a page into other pages ?

Folks,
Hello. My PeopleSoft component has 5 pages. Its layout looks like below:
AddJournal Header Lines Total Error
"AddJournal" is the first page that has 3 fields: OperatingUnit, ID, Date. The 3 fields is also a combo key that appears in the next 4 pages "Header", "Lines", "Total" and "Error" to maintain data consistency and identify the transaction.
I am working on a push button "Add" in the "AddJournal" page. The button should do 2 things:
First, when click on button "Add", it inserts the values of 3 fields into its underlying "AddJournal" table in Database.
Second, after click on the button, the value of 3 fields also appear on the next 4 pages "Header", "Lines", "Total" and "Error". All the other 4 pages' underlying Database tables contain the 3 fields.
I understand how to achieve the first function by using push button properties "Scroll Action" and "Row Insert". But don't understand how to achieve the second function.
Does any folk understand how to do the second function ?
Do I need to redesign the Database tables for the next 4 pages to achieve the second function ?
Thanks.

There is a lot here, and I think we will need more information to help.
FieldChange Event:
The FieldChange event occurs when you change that particular field. So, assuming the PeopleCode works correctly, it will copy the values of those three fields at the time just after you change the OperatingUnit. So, take this example:
-all three fields are blank
-You change the OperatingUnit to "OU"
-You change the ID to "XX"
-You change the Date to "04/23/2010"
The values that would be copied to the other pages would be "OU", blank, and blank because that is what they were just after changing OperatingUnit to "OU"
Does that make sense?
Page Design:
Normally, the keys are automatically populated for you. Header and Line sound like a parent-child relationship. So, if your page is designed correctly, the keys should be carried over automatically for you. If the tables are all sibling tables you will need the PeopleCode. I don't know if you want to explore the page design issue at all, but that might solve your problem without the PeopleCode.
In any case, it would help if you would post the page structure. First of all, what occurs level are the three tables at? You can tell on the Order tab of the page -- I believe it is the far left column.
PeopleCode:
Can you post your PeopleCode, and maybe we can spot something in the PeopleCode that is not right? If you are unsure if and when your PeopleCode is running, you can place a winmessage function in there. Put something like this:
WinMessage("Hello!");
You should see the hello message after you change the Operating Unit field. With deferred processing, you may not see it until you hit Save or Refresh.

Wrong value is passing from one form to a other form's parameter

I am passing value from one form to another form using following code
DECLARE
     pl_id ParamList;
pl_name VARCHAR2(10) := 'task_id';
BEGIN
pl_id := Get_Parameter_List(pl_name);
--destroy_parameter_list(pl_id);
IF Id_Null(pl_id) THEN
     null;
ELSE
     destroy_parameter_list(pl_id);
END IF;
pl_id := Create_Parameter_List(pl_name);
pl_id := Get_Parameter_List(pl_name);
IF NOT Id_Null(pl_id) THEN
Add_Parameter(pl_id,'PARAM_SEIT_ID',TEXT_PARAMETER,'120');
END IF;
     call_form('D:\dir1\form1', no_hide, no_replace,query_only, SHARE_LIBRARY_DATA, pl_id);
     delete_Parameter(pl_name,'PARAM_SEIT_ID');
exception
          when others then
               message('Error'||sqlerrm);
               message(1);
END;
I am created a parameter with the same name in the other form, but value is not passing to that parameter properly. it is showing value
-5153000000000000000000000000.
Please solve my problem

Try this code
DECLARE
PA_1 VARCHAR2(30);
PA_2 VARCHAR2(30);
PA_3 VARCHAR2(30);
PA_4 VARCHAR2(30);
PA_5 VARCHAR2(30);
PLISTREP paramList;
BEGIN
/* give value to parameter */
PA_1 := :PARAMETER.P_1;
PA_2 := :PARAMETER.P_2;
PA_3 := :PARAMETER.P_3;
PA_4 := :PARAMETER.P_4;
PA_5 := :PARAMETER.P_5;
PLISTREP := Get_Parameter_List(pl_name);
IF Not Id_Null(PLISTREP) THEN
Destroy_Parameter_List(pl_name);
End If;
PLISTREP := Create_Parameter_List(pl_name);
IF Id_Null(PLISTREP) THEN
Message('Error creating parameter list '||pl_name);
RAISE Form_Trigger_Failure;
END IF;
/* ADD_PARAMETER TO PARAMETER_LIST */
Add_Parameter(PLISTREP,'P_1',TEXT_PARAMETER,PA_1);
Add_Parameter(PLISTREP,'P_2',TEXT_PARAMETER,PA_2);
Add_Parameter(PLISTREP,'P_3',TEXT_PARAMETER,PA_3);
Add_Parameter(PLISTREP,'P_4',TEXT_PARAMETER,PA_4);
CALL_FORM(name_of_your_form,no_HIDE,NO_REPLACE,QUERY_ONLY,SHARE_LIBRARY_DATA,PLISTREP);
I have tried to adapt to your case.
Hope it helps you,
Fabrizio

VALUE NOT PASSING FROM 1 PAGE TO OTHER PAGE ?

Similar Messages

Maybe you are looking for