Apache err log on http server *broken pipe* each time a message comes thru
I've noticed on our http server, each time a message comes through for B2B we consistently get the following entries in the Apache error log:
(32)Broken pipe: MOD_OC4J_0087: Got an unexpected error while calling send() to send a message to oc4j and the error code is 32.
MOD_OC4J_0053: Failed to call network routine to send out an ajp13 buffer message to oc4j.
MOD_OC4J_0027: Failed to send out an ajp13 message to oc4j.
MOD_OC4J_0026: Failed to marshal a request to ajp13 message headers or send them to the web container.
Any idea what's causing this? Everything seems to be going through OK.
I'm trying to track down an issue that occurred over the weekend. I don't think this is related, but I do need to address it.
Thanks.
[
Hello,
Here is my 2 cents.
Oracle recommends you set the Oc4jCacheSize parameter to reduce the occurrences of MOD_OC4J_0087 and
related errors in your Apache error logs. To change this parameter, follow these steps:
1. Stop the OPMN processes on the middle tier.
2. On the middle-tier computer, open a terminal window and go to $ORACLE_HOME/Apache/Apache/conf.
3. Enter the following command:
cp mod_oc4j.conf mod_oc4j.conf.pre3604573
4. Edit the mod_oc4j.conf file by adding the following line after the </IfModule> line, but before the
Oc4Jmount /j2ee/* line:
Oc4jCacheSize 0
5. Start the OracleOPMN processes on the middle tier.
I would still suggest to analyze the stack trace further for exact issues.
Rgds,Ramesh
Similar Messages
-
Com.evermind.server.http.HttpIOException: Broken pipe
i am getting this error at my server. Can anybody help me in solving this. I am using Oracle 9iAs..and this is the full error that i get
com.evermind.server.http.HttpIOException: Broken pipe
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at com.evermind.server.http.HttpIOException.<init>(Compiled Code)
at com.evermind.server.http.EvermindServletOutputStream.write(Compiled C
ode)
at com.evermind.server.http.EvermindServletOutputStream.write(Compiled C
ode)
at com.evermind.server.http.EvermindServletOutputStream.write(Compiled C
ode)
at com.evermind.server.http.HttpApplication.include(Compiled Code)
at com.evermind.server.http.FileRequestDispatcher.forwardInternal(Compil
ed Code)
at com.evermind.server.http.FileRequestDispatcher.forward(Compiled Code)
at Premier.RegistrationServlet.createHTML(Compiled Code)
at Premier.RegistrationServlet.doGet(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at com.evermind.server.http.ServletRequestDispatcher.invoke(Compiled Cod
e)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Com
piled Code)
at com.evermind.server.http.HttpRequestHandler.processRequest(Compiled C
ode)
at com.evermind.server.http.HttpRequestHandler.run(Compiled Code)
at com.evermind.util.ThreadPoolThread.run(Compiled Code)I suggest you recompile your servlet RegistrationServlet with the debug option that way you will get the line in your source code that has triggered the Exception instead of (Compiled Code). From then on it will be easier for you to start undestanding what's going on.
-
Can you run Embedded PL/SQL Gateway and Oracle HTTP Server at the same time
Hi,
I know this will sound a bit odd but their is a business case for asking this. Can you run APEX via the Embedded PL/SQL Gateway and the Oracle HTTP Server at the same time? Would their be any security/stability/etc issues I'd need to worry about? I know that I'll need to run them on different ports.
Thank you,
Martin Giffy D'Souza
[http://apex-smb.blogspot.com/]I think I've done this in the past. Theres no technical reason why you can't do this as far as I know.
I can't remember if I used different ports or same port. -
I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." Comcast tells me server is not down all other network activity is fine. WHat's up with this?
Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account. My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
This is not an issue if I log onto the Comcast site.
And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
Argh... :-( -
My iphone 4 lock button is broken but each time i click on an app, the screen will turn black and go back to my home screen. How can i fix this?
Basics from the manual are restart, reset, restore. Try them.
-
I just got new ATT dsl internet service. Now, when I try and log into my YouTube account and numerous other websites, instead of logging me in, the screen turns black with a message displayed saying, "connection not trusted." On most sites, it will give me the option to either, "get me out of here" or "I understand the risks, allow exception." When I try logging into YouTube, the only option I have is; "get me out of here!"
Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
* https://support.mozilla.com/kb/Secure+Connection+Failed
You can retrieve the certificate and check who issued the certificate and other details like when it is valid.
* Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
* Click the "View..." button to inspect the certificate and check who is the issuer. -
I'm using Thunderbird with my work email account, which is using Exchange, this is not officially supported but access is allowed via IMAP.
The problem is when I'm using StartTLS or SSL I'm getting multiple different self signed certificates being returned, seeming depending on which specific backend server is handling the request, each time it causes the Confirm Security Exception dialog to be displayed. If I confirm the exception I get the dialog being displayed again until eventually I get a certificate that seems to match the first certificate I confirmed, at which point I can download or send my pending mail.
Thus is seems that there is only one certificate being stored as an exception for each server connection. Is there some way round this?
Thanks.What is the reason for the exception prompt in the first place?
-
The "Oracle Application Server 10g Administrator's Guide
10g (9.0.4)" says that logging for the HTTP_server can be done in ODL format - but I sure can't find anywhere where one would configure said logging.... anyone know how that's done?thanks for that link... i looked and i didn't find the parameters that I was hoping to find: max log file size and number of archive versions to keep.... did I miss that? We don't want to have to shut down the containers and manually delete log files..... I think I've figured out how to deal with this at the app server level, but not at the HTTP level.
thanks. -
Streaming music to my apple TV is not working well, sessions are broken off each time. Any advice?
Streaming music from ipad or iphone to apple TV that is linked to soundsystem is nor working well. After playing for a couple or some times 10 minutes it suddenly stops and connection is lost or quality becomes really bad. Does somebody have a solutions?
Do you use a proxy server ?
-
HTTP Server under stand-alone-apache new thread
Sorry I closed the other thread too soon thinking I had a solution by creating an alias for libdb.so.2. ButI was mistaken.
So once again:
I made an installation of Oracle HTTP-Server from the Companion-CD Release 10.2 for Linux 64bit in a Suse Enterprise 10 SP1 environment.
Installation was successfu. HTTP-Server now starts without error messages.
But if I try to include the plsql.conf in the http_conf_local of the stand_alone-apache version 2.0 I get the message
'cannot load modplsql.so. Wrong ELF class. ELFCLASS32.
In the meantime I have learned that you can use 32bit-classes under 64bit Linux.
But do I have to do to get them accepted?
Thanks in advance for further help.
ChristineWell, after some more research I ended up doing the following:
New aim is to have a fully working oracle HTTP-Server beneath another Apache and redirecting incoming URLs with /pls/ to the Oracle-HTTP-Server
-remove all includes from the other Apache pointing to my HTTP-Server
- correct file owner mismatches by giving the oracle user the ownership on all files within the oracle_home-path with a chown-command
- correct file group mismatches by relating all files within the oracle_home_path with group dba using a chgrp-command
After that the opmn-demon was able to start with ./opmnctl start
Trying to start HTTP-Server with ./opmnctl startproc ias-component=HTTP_Server failed, but now I got logs to investigate.
-disabled two lines in httpd.conf:
#LoadModule rewrite_module libexec/mod_rewrite.so
#LoadModule dbm_auth_module libexec/mod_auth_dbm.so
then HTTP_Server starts.
Why it can't load the mentioned modules I do not know, they are present where they are supposed to be.
Redirect the outside listening apache to my HTTP-Server by adding into it's http_conf_local:
ProxyPass /pls/ http://localhost:7780/pls/
ProxyPassReverse /pls/ http://localhost:7780/pls/
ProxyPass /htdocs/ http://localhost:7780/htdocs/
ProxyPassReverse /htdocs/ http://localhost:7780/htdocs/
Christine
Edited by: candrae on Nov 5, 2008 8:55 AM -
Apex Installation ok, HTTP Server displays error in logs
I have a strange issue.
Apex 3.2 installation was okay. However when bouncing Apache HTTP Server, I have following errors in the log.
=================================================================
[Mon Mar 30 23:36:26 2009] [error] [client 192.168.2.102] [ecid: 1238474186:192.168.2.102:5792:4952:4,0] File does not exist: c:/oraclehttp/apache/apache/htdocs/favicon.ico
[Mon Mar 30 23:36:29 2009] [error] [client 192.168.2.102] [ecid: 1238474189:192.168.2.102:5792:4116:5,0] File does not exist: c:/oraclehttp/apache/apache/htdocs/favicon.ico
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:6040:5,0] Filename is not valid: c:/orahttp/apache/images"favicon.ico
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:6040:6,0] Filename is not valid: c:/orahttp/apache/images"javascript/apex_ns_3_1.js
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:6040:7,0] Filename is not valid: c:/orahttp/apache/images"javascript/apex_3_1.js
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:6040:8,0] Filename is not valid: c:/orahttp/apache/images"javascript/apex_get_3_1.js
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:6040:9,0] Filename is not valid: c:/orahttp/apache/images"javascript/apex_builder.js
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:6040:10,0] Filename is not valid: c:/orahttp/apache/images"css/apex_3_1.css
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:3956:1,0] Filename is not valid: c:/orahttp/apache/images"css/apex_builder_3_1.css
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:4780:1,0] Filename is not valid: c:/orahttp/apache/images"htmldb/apex_logo.gif
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:4696:1,0] Filename is not valid: c:/orahttp/apache/images"1px_trans.gif
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:3956:2,0] Filename is not valid: c:/orahttp/apache/images"htmldb/builder/right_curve.gif
[Tue Mar 31 00:04:22 2009] [error] [client 192.168.2.102] [ecid: 1238475862:192.168.2.102:4640:6040:11,0] Filename is not valid: c:/orahttp/apache/images"htmldb/builder/left_curve.gif
[Tue Mar 31 00:04:25 2009] [error] [client 192.168.2.102] [ecid: 1238475865:192.168.2.102:4640:4780:2,0] Filename is not valid: c:/orahttp/apache/images"favicon.ico
[Tue Mar 31 00:04:25 2009] [error] [client 192.168.2.102] [ecid: 1238475865:192.168.2.102:4640:4696:2,0] Filename is not valid: c:/orahttp/apache/images"favicon.ico
=======================================================
My http home directory is c:\OracleHTTP; my old HTTP directory was C:\orahttp that I deleted and reinstall Oracle HTTP Server.
I don't understand why these error is coming? even Apache is referring old http server home.
on DADS.CONF my image directory is set to
Alias /i/ "c:\OracleHttp\Apache\images\/"
So the situation is when I invoke Apex it displays with all images, but do not move after that; i.e the screen don't move whatever you type.
Can anybody give advise what can we do to make Apex functional?
Thanks.The reference to old HTTP home was resolved as there were old settings on Window Registry that I deleted.
I am still getting following errors:-
[Tue Mar 31 09:10:48 2009] [error] [client 192.168.2.102] [ecid: 1238508648:192.168.2.102:944:4080:7,0] File does not exist: c:/oraclehttp/apache/apache/htdocs/favicon.ico
[Tue Mar 31 09:10:50 2009] [error] [client 192.168.2.102] [ecid: 1238508650:192.168.2.102:944:1244:4,0] File does not exist: c:/oraclehttp/apache/apache/htdocs/favicon.ico
Any body have ideas?
Thanks. -
MOD OC4J errors in HTTP server Error log
these errors are continously shown in the error log of HTTP server.
and my error rate reaches upto 8% somtimes
MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
MOD_OC4J_0119: Failed to get an oc4j process for destination: home.
MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
MOD_OC4J_0119: Failed to get an oc4j process for destination: home.
MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
MOD_OC4J_0207: In internal process table, failed to find an available oc4j process for destination: home.
MOD_OC4J_0150: Failed to deterministicly find a failover oc4j process for session request with uid:
MOD_OC4J_0119: Failed to get an oc4j process for destination: home.
MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
MOD_OC4J_0207: In internal process table, failed to find an available oc4j process for destination: home.
MOD_OC4J_0119: Failed to get an oc4j process for destination: home.
MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
MOD_OC4J_0207: In internal process table, failed to find an available oc4j process for destination: home.
File does not exist: e:/ora9ias/forms90/java/java/awt/KeyboardFocusManager.class
File does not exist: e:/ora9ias/forms90/java/oracle/forms/registry/default.dat
File does not exist: e:/ora9ias/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
File does not exist: e:/ora9ias/forms90/java/oracle/ewt/alert/resource/AlertBundle_en.class
File does not exist: e:/ora9ias/forms90/java/oracle/ewt/alert/resource/AlertBundle_en.propertiesI get the same set of errors.
9iAS 9.0.2.0.1 infrastructure and portal installed on same solaris 8 machine.
Jeff Black -
Hi every body,
My j2EE application is in production state, if we examine me application.log i see a lot of errors like
3/11/03 12:20 PM registres: IO Error
com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpIOException: Broken pipe
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.EvermindServletOutputStream.flushBuffer(EvermindServletOutputStream.java:81)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse.flushBuffer(EvermindHttpServletResponse.java:1823)
at javax.servlet.ServletResponseWrapper.flushBuffer(ServletResponseWrapper.java:52)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.EvermindJSPWriter.flush(EvermindJSPWriter.java:204)
at oracle.jbo.html.jsp.datatags.ComponentTag.doStartTag(ComponentTag.java:74)
at secur.RegistreEditOctroi._jspService(_RegistreEditOctroi.java:496)
at com.orionserver[Oracle9iAS (9.0.2.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at registre.RegisterSecurity.doFilter(RegisterSecurity.java:47)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:519)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)
If you can give me a hint to find the solution.
thank you very much.Broken pipe means you have written to a connection that has already been closed by the other end. That indicates either a failing peer or an error in the implementation of your application protocol.
BTW you should create, and flush, the ObjectOutputStream before the ObjectInputStream, at both ends. -
Jackd + guitar: "timeouts and broken pipes"
Hi friends! I'm trying to pass my electric guitar via any rack/effects (like Guitarix or Creox) with no luck. I've got this sound card:
01:06.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
01:06.1 Input device controller: Creative Labs [SB Live! Value] Input device controller
I try with QJackCtl and invoking jackd from the terminal with any luck.
jackd -d alsa -C -P
jackd 0.121.3
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
could not open driver .so '/usr/lib/jack/jack_net.so': libcelt0.so.2: cannot open shared object file: No such file or directory
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 16bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 16bit little-endian
ALSA: use 2 periods for playback
jackd watchdog: timeout - killing jackd
[gabo@machina ~]$
This is the output from QJackCtl:
00:12:07.126 Client deactivated.
00:12:07.130 JACK is being forced...
cannot read server event (Success)
cannot continue execution of the processing graph (Bad file descriptor)
zombified - calling shutdown handler
cannot send request type 7 to server
cannot read result for request type 7 from server (Broken pipe)
cannot send request type 7 to server
cannot read result for request type 7 from server (Broken pipe)
00:12:07.339 JACK was stopped with exit status=1.
I can hear my guitar and record with Audacity, but when jackd enter into the escenario everything blows up. I read that nowadays almost any sound card will work with QJackCtl with the default options. I play with the parameters and sometimes jack refuse to start. With the default options on i can make it run, but i get no sound of the racks or guitar effects processors neither the guitar tuners that use jack takes the sound from the guitar. My line input is in capture via alsamixer, but still no luck. Any clue on this? I'm skipping steps?
Thanks in advance.
iamgaboHi!
groups && cat /proc/asound/cards && cat ~/.asoundrc && cat '/etc/security/limits.d/audio.conf' && jackd -v
adm disk lp wheel http network video audio optical storage power users polkitd vboxusers wireshark kismet
0 [Live ]: EMU10K1X - Dell Sound Blaster Live!
Dell Sound Blaster Live! at 0xcc00 irq 17
#pcm.upmix71 {
#type upmix
#slave.pcm "surround71"
#delay 15
#channels 8
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
# convert alsa API over jack API
# use it with
# % aplay foo.wav
# use this as default
pcm.!default {
type plug
slave { pcm "jack" }
ctl.mixer0 {
type hw
card 1
# pcm type jack
pcm.jack {
type jack
playback_ports {
0 system:playback_1
1 system:playback_2
capture_ports {
0 system:capture_1
1 system:capture_2
cat: /etc/security/limits.d/audio.conf: No such file or directory
I have a file called 99-audio.conf
cat /etc/security/limits.d/99-audio.conf
@audio - rtprio 99
@audio - memlock unlimited
Also i've seen some guys changing this file too:
cat /etc/security/limits.conf
# /etc/security/limits.conf
#Each line describes a limit for a user in the form:
#<domain> <type> <item> <value>
#Where:
#<domain> can be:
# - an user name
# - a group name, with @group syntax
# - the wildcard *, for default entry
# - the wildcard %, can be also used with %group syntax,
# for maxlogin limit
#<type> can have the two values:
# - "soft" for enforcing the soft limits
# - "hard" for enforcing hard limits
#<item> can be one of the following:
# - core - limits the core file size (KB)
# - data - max data size (KB)
# - fsize - maximum filesize (KB)
# - memlock - max locked-in-memory address space (KB)
# - nofile - max number of open files
# - rss - max resident set size (KB)
# - stack - max stack size (KB)
# - cpu - max CPU time (MIN)
# - nproc - max number of processes
# - as - address space limit (KB)
# - maxlogins - max number of logins for this user
# - maxsyslogins - max number of logins on the system
# - priority - the priority to run user process with
# - locks - max number of file locks the user can hold
# - sigpending - max number of pending signals
# - msgqueue - max memory used by POSIX message queues (bytes)
# - nice - max nice priority allowed to raise to values: [-20, 19]
# - rtprio - max realtime priority
#<domain> <type> <item> <value>
#* soft core 0
#* hard rss 10000
#@student hard nproc 20
#@faculty soft nproc 20
#@faculty hard nproc 50
#ftp hard nproc 0
#@student - maxlogins 4
* - rtprio 0
* - nice 0
@audio - rtprio 65
@audio - nice -10
@audio - memlock unlimited
jackd 0.121.3
There are the snaps for QJackCtl
Also, checkout this stuff that i've recorded with audacity, only from the line and nothing else
http://ompldr.org/vZ3A2eg
Thanks!
Last edited by iamgabo (2012-12-15 02:21:08) -
Agentry: SSL Error - broken pipe
Hi,
We have a work manager 5.2 modified version running on our production environment and lately we are experiencing some weird errors when the users try to synchronize.
Sometimes (maybe 50% of the attempts...) the synchronization process is stuck and the client doesn't show any error at all. It's just waiting while loading a complex table, replacing definitions or anything, but never finishing. Inspecting the server logs I've seen that the error that seems to cause this issue is the following:
2014/04/10 14:22:57.203: + ANGEL Connection=XXX.XX.XXX.XXX:XXXXX
2014/04/10 14:22:57.203: + ANGEL Vine=1848370469
2014/04/10 14:22:57.203: + User=XXXXX
2014/04/10 14:22:57.203: + Server=Agentry
2014/04/10 14:22:57.203: + Complex Table=ctmaterialstoragelocation
2014/04/10 14:22:57.203: + User=XXXXX
2014/04/10 14:22:57.203: + ANGEL Vine=1848370469
2014/04/10 14:22:57.203: + ANGEL Connection=XXX.XX.XXX.XXX:XXXXX
2014/04/10 14:22:57.203: + Data Chunk=0
2014/04/10 14:22:57.203: SSL error: error:2007107C:BIO routines:BIO_write:broken pipe
This time it happened while loading the complex table ctmaterialstoragelocation but it's just an example. It can happen in any other step.
Do you think that this error is really related to SSL? I think it's not and my guess is that something is wrong with the network and the connection is broken but I don't know how to be sure about the root cause of the issue. Any clues that could help me?
Thank you.
Tags edited by: Michael ApplebyHi,
I'm going to close this thread since I discovered that the issue is due to my company network problem.
We haven't found the root cause, but after many attempts testing from my home wifi I don't face the problem, so it is not caused by the Agentry Server.
Maybe you are looking for
-
I also haven't exactly started up my ipod, I just plugged it into a laptop to get it working when I was on the road, but I planned to put it on a different computer where my info from my old Ipod nano is.
-
TS1702 How do I delete an old Apple ID?
When I attempt to update my Apps the password window pops up but my Apple ID displays a discontinued email adresss no longer in use. I've reset, updated and signed off of my Apple ID but nothing changes and the old email address keeps popping up. Ho
-
File - RFC - File without BPM --- Object not found in ResponseOneWayBean
I am using PI 7.1, and facing the following error in File - RFC - File without BPM "Error: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ResponseOneWayBean." I am using 1 sender CC for File (
-
when i have my sim in nokia e66 i'm not able to make a call and to receive a call or sms.when i put another sim it works fine and my works fine in an onther mobile.can anyone know what might the problem be? Solved! Go to Solution.
-
How does "High Dynamic Range" Photos work?
I see that I'm getting two photos from each shot. I suppose that's because I tabbed "on" the selection to keep the regular photo. What's going on with "High Dynamic Range" photos and how can I tell which photo is the regular photo and which is the HD