Aperture 3 and Automator (Choose albums error)

I use Automator with Aperture to:
1 Choose an album
2 Filter for Picks
3 Export Versions
4 Create Archive
5 New Mail
6 Add attachment to mail
It has worked fine for months but now on the first step ie Choose Album I get the following error
*The result of a numeric operation was too large. (-2702)*
I have recently upgraded to Snow Leopard and also Aperture 3 so it could be a problem with either of these. Does anyone have any ideas?

Okay ... further to my original note ... has anyone seen this?
Using Aperture 3 and MobileMe ... do you need to create unique passwords for each album?
(that seemed to fix the generic password on multiple albums)
No I have not seen this kind of problem, and no you shouldn't need unique passwords for each album.
I have specific groups that I regularly share sets of albums with. When I create a new MobileMe album, I specify which group has access (or limit the access later via the Aperture-MobileMe album settings). I established the group name (and password) once. For subsequent albums I just specify that group. If I use the Tell A Friend... option to announce a new album, it will share the group/username and password.
IF I enable uploading additional photos via e-mail, that does create a unique/generic e-mail address for each album -- has to as you want any photos to upload to THAT album.
I know this answers your question, but quite likely does not provide a solution. If you can be more specific as to EXACTLY what steps you are taking I might be able to replicate your process and offer a specific solution. Hopefully the pieces I've offered may help you find a solution though?
Best wishes!

Similar Messages

Batch management requirement cannot be changed; choose "Display errors

i am getting this error in material master when i am removing tick from batch managment
regard
nabil

Batch management requirement cannot be changed; choose "Display errors"
Message no. M3530
Diagnosis
The pushbutton Display errors appears only in dialog mode, not in data transfer or in mass maintenance.
Procedure
If this message appears in data transfer or in mass maintenance, and you want to know why the field cannot be changed, access the material in dialog mode using the relevant transaction below, try to change the field as required, and then choose Display errors:
Industry
Proceed
Retail
Proceed

Aperture and Automator.

I have a web gallery (http://traceramc.co.uk/japan/viewerDynamic.php?id=CRW_1860.jpg&gallery=Meiji%20S hrine) created using php and mysql that allows people to leave comments on each of my photos - I upload images and thumbnails to a webserver and then run an sql insert statement to populate the database.
Now that I've moved to Aperture (from the Finder) for my photo management, I would like to automate this process.
I can create an automator workflow using the 'Choose Albums' and 'Extract IPTC Data' actions that will write information from aperture out to a textfile. In automator I can then create an sql statement using the information in this file. I then export the images and create the thumbnails ready to upload to the webserver.
Is there an action that will allow me to extract the EXIF data and write it out to a text file so that I can include it in the insert statement? If not has anyone any idea how to go about doing this?
Any help would be much appreciated.

The site where you picked up the 'Extract IPTC Data' is run by Apple's product manager for Automator & Applescript as a personal side project--presumably to feature scripts and actions written by people outside Apple.
It would not be difficult to create a script or action to write out EXIF data to a file, similar to what the IPTC action does. If you keep an eye on the script sites you will probably find one.
My personal list of scripts that I would like to write for Aperture is now so long that I won't catch up for months--if ever. Your idea would be a good one to add to that list.

Need help solving Error 3005 using activex server and automation open.

Hi,
I am trying to use a master vi to call a slave vi by using the activex server option. The steps i have taken are:
1. In the slave vi, go to advanced tab in build options and check enable activex server.
2. After building the .exe go to the command prompt and type the path to the .exe followed by /RegServer. Ex: C:\slavevi\applicatoin.exe /RegServer. This will add it to the activex plugin list.
2.a restart labview if it was open.
3. In the master vi use automation open, create a constant for the automation refnum and right click it. Select browse. Browse to the name you chose in the enable activex server field from step 1. Choose “show creatable objects only” and pick the _application one.
4. use an invoke node and connect automation open to it. Choose getVIReference. This will drill down to the actual vi you want to control.
5. The path will be the install path + the vi name. Ex: \slavevi.exe\mainviname.vi.
These steps actually worked on the machine that I built the vis on but if I build the exes and transfer them to another computer I get error 3005 when it tries to open the slave.exe program. In each instance the master and slave vis are both local (not trying to go through a network or anything). I have registered the slave.exe and .tlb file on the new computer, rebooted etc and nothing seems to work. I also tried running the master vi as source code but that didn't work.
The master vi was originally built in labview 7.1 and the slave is built in LV 9.01 but I have since upgraded the master vi to 9.01 to try and resolve the problem.
Is there something that happens during a build that needs to be replicated on the new computer?
Thanks for any help.
Solved!
Go to Solution.

Help needed ..
am also getting this error 3005 in automation open in LV.
i am trying to design a GPS software by integrating Google Earth Application in LV. i am successful in that. but when i am trying to use its properties like drawing a pilygon or point at particular longitude and latitude am getting error.
I read that mass complie thing was for older LV versions.
am using LV2009.
Attached is the part of code thats creating trouble.
Attachments:
GE.JPG ‏19 KB

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I tried to implement photo albums using iweb and got a publishing error.

I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp
Exact message "There was an error communicating with the FTP server. Try again later, or check with your service provider."
If I reduce the albums inside to 1 then it seems to work but that takes away from the usefullness of multiple albums.
my iWeb version is 3.0.4 (601)

Publish your site to a folder on your hard drive to see if the publication will proceed successfully and open the site locally with your browser to confirm all of the alums are there and work. If they do try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If you're still not able to publish from iWeb to your server download and use the free Cyberduck to upload your website files to the server. Users have found that CD has been successful when iWeb had problems.
OT

Tried to buy Aperture 3 and got an error message Aperture can't be installed on "Macintosh HD" because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update. Problem is, I had already updated my IMac to Lion OS

Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update. Problem is, I had already updated my IMac to Lion OS

iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)

When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

Hi,
If you choose the incorrect settings for printing, yes - the print quality will be affected.
Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings.

I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

Please refer:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac- os.html
Regards,
Ashutosh

Error -2147220733 occurred at DAQ Assistant (in Measurement and Automation Explorer)

Ok! Just before the weekend I figured out how to make channels in Measurement and Automation Explorer for inputs through a couple different NI input devices (USB-9211A & PCI-6229 DAQ). Things were going well. Loaded up the computer today, added a few more channels. Worked fine. Now all of a sudden, any channel I make has an error and if I try modifying existing channels and saving, I get same error:
"This global channel currently has an error. You can save the global channel, but it cannot be used until all errors have been fixed. Press "Yes" to save anyway, or "No" to cancel and show the error."
If I hit yes, the channel is non functional. After hitting no, I get:
"Error -2147220733 occurred at DAQ Assistant. Possible Reason(s): "
with no possible reasons listed. I tried restarting the program. I tried restarting the computer. I verified connections. Searched for the above stated error number on ni.com, google.ca, and in the MAX help files, and found absolutely nothing. I have no clue what to do. Any help would indeed be very much appreciated.

Hi there,
This is my first time on here and I've only been using this software for a couple of days so it's possible I'm making a trivial error but I thought I'd post here anyway as I can't find anything on the net about my problem.
I also get an error while trying to save:
Error -2147220733 occurred at DAQ Assistant
Possible Reason(s):
Requested Code: -2147220733
But mine comes about in different circumstances to the one in the original post on this thread by Kahless. I was editting a VI logger task and within that I was trying to edit an NI-DAQmx Task. I was trying to change the clock settings, specifically I was attempting to change the Rate (Hz) from the 1k default to just 20, or 200. I got the error while trying to save so changed it back to 1k, but the error persisted even though I'd set it back to what it was.
I thought at first it might be simply that I was trying to edit an NI-DAQmx task within VILogger, so I tried making the ammendment directly but the problem was still there.
Any ideas?
Many thanks.

Error 70025 in Measurement and Automation Explorer

After a clean reboot of the system I receive Error -70025 ("Return Buffer is not empty..") in the Measurement and Automation Explorer. When I click on "Clear RDB" which is supposed to solve the problem, it says "Error clearing the return data buffer". In the status tab, all LEDs are flashing (Error Code varying from 0xFFFF to 0x0182).
First, I simply tried to remove the motion controller (it's a NI PCI-7334) from the MAX tab which did not work. Then, I tried to repair the installation of all NI tools but this didn't help either.
I'm working with NI Motion 8.4 and MAX 5.4.0f0 on Windows XP.
Do you have any idea how to solve this problem? Currently, I cannot run the motor at all.
Thanks,
Jürgen
edit: I just realize that the controlller is listed as PXI-7334 in the Windows Device Manager but in fact it is a PCI-7334. Would this explain the problem?
update: Forcing the installation of the PCI-334 driver does not make any difference.

Hi Jürgen,
you can find the description of occurence and solution for this error here.
Please try it.
When it dosen't solve your issue please contact me again.
Kind Regards,
Philipp K.
Applications Engineer | NI-Germany

WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click o

WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?

Margaret
Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
1. The usual Premiere Elements 8 drill.
a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
Apple - QuickTime - Download
2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
a. Is computer opitimized, defragmented, etc.
CCleaner - PC Optimization and Cleaning - Free Download
b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
3. Project Specifics
For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
Video
video compression
audio compression
frame size
frame rate
interlaced or progressive
pixel aspect ratio
If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
Photos
Pixel dimensions and how many photos?
Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
ATR

I have just purchased 2 songs and I went to sync my Iphone 3G and I get an error 13019.. the iphone "my name" cannot be synced. I have tried.. removing voice memos (I have none) remove all music.. syncs fine.. if I choose to sync music I get the error

I have just purchased 2 songs and I went to sync my Iphone 3G and I get an error 13019.. the iphone "my name" cannot be synced. I have tried.. removing voice memos (I have none) remove all music.. syncs fine.. if I choose to sync music I get the error help..
I have tried everything and now I dont have one song in my Iphone since it doesnt want to sync music because I get this error...
by the way I have tried this
http://support.apple.com/kb/TS2830
and I have tried restoring the iphone...

I translated..
El problema -> El itunes me dijo que habían como 12 canciones que tenían mejor calidad. yo decidí intercambiar las canciones que tienen mejor fidelidad en itunes.
Itunes me pregunto si quería que ponga las canciones que iva a remplazar en “desk top” a lo cual yo respondí que si. El itunes hizo algo.. no puso las canciones viejas en el desk top pero cuando fui a sincronizar recibí el error 13019.
La solución para los usuarios de Windows.. busca todas las canciones *.m4a que se han modificado en tu compu durante el día del incidente.. toma nota de los nombres de las canciones.
En itunes busca estas canciones y deselecciona las canciones.. (con suerte veras que las canciones están seleccionadas dos veces.. deselecciona todas las canciones que fueron modificadas en ese día. Al final asegurase que tienes seleccionado la opción de solo sincronizar las canciones que están seleccionadas en tu lista.) y trata de sincronizar con itunes..

HT201263 After forcing iPad into recovery mode and choosing Restore, restore fails and returns a 1600 error. What is my next step? Can you force a restore?

iPad has blank screen. Screen froze and went blank. Have not been able to get any response. Forced in to recovery mode, but restore fails with a 1600 unknown error. Has anyone had any success in reviving an ipad in this state?

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Message was edited by: Texas Mac Man

Aperture 3 and Automator (Choose albums error)

Similar Messages

Maybe you are looking for