APEX... USER ACTIVITY LOG
Hi,
Is there a way I can track user activity... need to know who loged into the application and how many times and which pages were reviewed...
I believe this is something that already exists within APEX, as a new Bee need some directions...
Thanks
Hello 'user12863454',
This is an old thread but wasn't sure if you had got the answer for it. Just in case, if you haven't, here's something you could try.
1) Login to APEX as an apex administrator
2) On top right region --> Monitor Activity (you'll see this only if you are an administrator)
3) This should take you bunch of existing links (apex built-in reports) that also shows what you need
- Page views by User, by Application, etc
Hope this helps.
Of course, all this information is stored in 'apex_activity_log' (built-in view). Remember, as the previous Forums user posted, this data is stored only for '4 weeks' and if you need historical information then you'd have to build a custom table and custom code to store the data.
Regards,
Taj
Similar Messages
-
Oracle 9i and user activity logging
Hi,
i am new on the matter but i have to trace the user activity and build a small application.
those are the specifications :
i'm using oracle 9i database version on 64 bit
the O.S. used is Unix Aix 5.2
for each data base we using i have to trace the user activity all of them, about 3 DB + application
i have create some some triggers to get some information, but still the work is there :
create trigger ... after logoff on database .. begin insert into table xx_tab ( ,,,,) end ;
create trigger ... after ddl on database .. begin insert into table xx_tab ( ,,,,) end ;
create trigger ... after logon on database .. begin insert into table xx_tab ( ,,,,) end ;
create trigger ... after servererror on schema .. begin insert into table xx_tab ( ,,,,) end ;
Here is the issue i am faced to /
how could we simulate a create trigger ... after DML on database or schema ? as far as i know we trigger a DML only on a specific table. Is there any possibility to trigger a DML on any database object or schema?
for the moment i don't know if it 's the good think to do but, but it's a try, if you have any idea or other methods to trace the user activities on DB, please don't hesitate to get me informed.
Rgds,
PaulThis is the forum for the SQL Developer tool. You'll get more answers in the General or SQL And PL/SQL forums.
Regards,
K. -
User SAP* is active. No other users can log on. Now What?
After the last time I restarted the portal, I get the following message when I try to logon:
User SAP* is active. No other users can log on
Before the reboot, I was trying to configure LDAP. I changed the Data source from "Database Only" to "Read-Only Microsoft ADS (Deep Hierarchy) + Database". I also, tried to create a Superuser/Password. You can logon using SAP* and see the users from LDAP.
Any thoughts? Also, can anyone clarify the configuration option:
SAP* User Configuration
Enable SAP* user (If you disable the SAP* user, enter a superuser ID and password below)
Superuser Name
Superuser Password
EP6.0Bill,
You have to assign a user the super admin role. Once the user has this role, go to the UM Configuration (System Admin--> System Config --> UM Configuration) and uncheck the Enable SAP* User option and enter in the superuser name and superuser password. Restart the portal and users should be able to login.
FYI. No users can login to the portal if sap* is active.
Regards,
Marty -
How to log the user activity in JSF?
How to log the user activity in JSF?
e.g. the pages the user accessed
searching criteria the user inputted...user080701 wrote:
I need to write the info to database so that we can analyse which product most people seach for , etc.
Can I write a filter to capture the request info and write the info to database?Of course. Although I would still advocate using logs. You can always parse them and put the data in a database after the fact. -
Hi. I want, for certain users, to log all activity within my database. I want to know every object they've accessed, every query issued, etc. Anyone know how to do this? I'm running 9i.
Thanks
KHCheck the Adminstrators Guide on how to use Auditing.
http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/audit.htm#1108 -
Force Active Directory Users to Log Into a Shared Local Profile.
I've searched long and hard for an answer to this but I've found very little info on it so I'm starting to wonder if it's at all possible.
On some of our "Presenter PC's" at work it has been deemed that the creation of a new account from the Default profile takes too long when logging into Active Directory and slows presenting down too much. Our Default profile is probably around 120Mb due to
the contents of the image after deployment and how every application is tailored for use hence the AppData folder takes the bulk of the size up and it's not an option to remove it.
These PC's are (for now at least but hopefully not for much longer) locked down by Deep Freeze which resets all changes to all files when the PC is rebooted so a shared profile is not a problem at this point in time.
What I want to know is whether there is ANY way to make it so that a user authenticating to Active Directory can ALWAYS be forced into a pre-configured, local profile running on Win 7 32/64 Pro?
I've been looking at credential providers and replacing USERINIT.exe. I'm just not 100% sure which part of the process actually tells the PC which profile to use. I know that the registry is checked for the user GUID and if not present creates a new entry and
copies the Default profile but I don't know quite where this is called and how to modify it.
My programming knowledge limited to a bit of CMD and AutoIt but I do know a few coders so if we really have to get our hands dirty on this it isn't the end of the world.
I should also add I've recently been toying with taking the AppData folder outside of the Default profile and creating a SymLink to it but upon copying the Default profile to a new profile (much quicker and more acceptable) the SymLink is lost and replaced
with a relatively empty set of folders which can't be deleted and replaced with a SymLink because the LSASS.exe process is using it and obviously you can't stop that process...
Making the PC log into a local profile on startup is also not an option because a user MUST log into AD to not be in breach of our AUP and all network drives must be availalbe (mapped by GPo and login script).
Any help is more than welcome at this point in time as I've pretty much exhausted all avenues that I know of and have turned to you helpful folk. CheersHi,
For mandatory profile, I suggest you refer to the following articles:
Customize the default local user profile when preparing an image of Windows
http://support.microsoft.com/kb/973289
mandatory profiles
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/d2406a55-e053-45c5-b064-bf009c4bfafc
Hope this helps.
Vincent Wang
TechNet Community Support -
Tracking User Activity with Standard Web Logs and Tools Like WebTrends
We are running EP 6 SP14 on UNIX and I'm looking to track user activity. Not just how many people have logged in, but who is accessing what documents in KM. For example, what documents are the most popular and how much use the system is getting.
I was hoping that EP 6 (Unix platform) ran off us some standard web engine (like Apache) and we could just turn web logs on, but from the lack of discussion on SDN, I'm not encouraged.
All I've seen is unofficial link to a Portal Activity Report, which would get us part of the way, but is not full web reporting.
Portal Activity Report:
https://www.sdn.sap.com/irj/sdn?id=/library/uuid/0101b690-0201-0010-6584-a02730ad5edd
Does anyone have any insight on this?HI llise
Did you get any answers? We are in the same quandry as the exisitng tracking reports are not sufficient for our needs as our users are used to using more sophisticated tools like livestat. -
How to trace user activity like logs in pl/sql ?
Hi,
i would like to know is there an a way to trace the user activity like log can be done through any procedure ?
If you can tell me the related tables is enough . i can proceed further ?
Thanks
Rangan SIf you want to trace SQL statements, you can use SQL trace and TKPROF: http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/sqltrace.htm#i4170
Edited by: P. Forstmann on Jul 31, 2009 10:05 AM -
Only One Mobile User can Log In to Laptop
I have a network account on my Mac Book Pro. I can log in no problem, access everything on the network, etc. but no one else can log in to this particular laptop. All of the other users can log into each other's identical Mac Book Pros, my account included. I have checked in my MBP's System Preferences > Accounts and the "Allow network users to login to this computer" checkbox is checked. The PDC is Leopard 10.5.6 running Open Directory.
When one of the other network accounts tries to log in to my computer we get the following error:
You are unable to login to the user account (username) at this time. Logging in to the account failed because of an error.
I have googled that error but nothing seems to apply to this situation. Most of the postings found here and on the web are authenticating against Active Directory, and the assumption seems to be no one can log in, not just select accounts.
I've done plenty of searching here and on Google but the description of the problem is hard to summarize so I'm posting my own question. Thank you in advance for any information you can provide.Is this a second hand phone? It sounds like the it is and the previous owner did not disable Activation Lock, the antitheft feature of iOS. If this is the case then the only solution is to get the previous owner to unlock it.
-
How can i see when someone has accessed my call/text log. (This is possible on google/gmail) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in persuing that further. I just need to see when my account has been accessed if possible.
Hi lynniewigs,
This is a common concern among Android and I-phone user, and one of the drawbacks to using a smart phone. We lose so much privacy. Our phones become cameras into our homes for us to be spied on.
I don't know what type of phone you have, if it is even a smart phone, but here is an example of an application that you can use to determine which applications are accessing your information and sending it out.
Permission Scanner - Android Apps on Google Play
Google just recently revamp their permissions geared to hide invasive applications that spy and send out your information without your knowledge. Report says be aware of what your Android app does - CNET
Please continue to be mindful of the apps you download and the permissions you give. -
OD users cannot log on without server home directory
I am new to OD and am trying to configure a working setup for a few Macs on the network. The server is set up as an OD master, and while we are running Active Directory, the Mac server is not integrated into the AD network. DHCP and DNS are handled by the server that provides AD.
I have set up a few test users and bound a Mac to the OD server for testing. I've found that if I don't specify a home directory for a particular user in workgroup manager (i.e. I just leave it at (none)), the user cannot log on to the bound Mac. The log in window begins to slide as if it is accepting the password, then stops and shakes and brings me back to the login window without any error message. If I specify a home directory on the server, it will then accept the username and password, show that I am logging in as said user, then display the message, "You are unable to log in to the user account [user] at this time. Logging into the account failed because an error occurred."
I'm guessing the error message relates to a permissions issue with the way the home directories are set up. But honestly, I'd rather the users just have their home directories stored locally rather than on the server. How do I configure it so that the users are able to log on and their home directories are stored locally?
Thanks in advance for any assistance that can be provided!After playing around with the system some more, I found that I had to explicitly specify the local home directory. I set it to /Users/ and everything seems to be working now.
-
DC on VM Restored after crash - Does Not allow PCs to Join Domain, or Domain Users to Log in
We currently had a RAID array crash and rebuilt our main server which housed VMs for our Web and DC.
The main server was restored from a bare-metal backup from 6 months prior to the latest backup of the VMs (not sure if pertinent)
Since the Restore, Domain computers cannot access file shares on the main server or VMs - "unspecified network error
0x80004005
Removed the main server from the Domain to re-join it due to some issues with logging in (even with a Domain Admin account) - Found that any PC removed from the domain was no longer able
to rejoin - Receive (Network path was not found error)
Domain Users cannot log in to their computers - Error reads "The trust relationship between this computer and the domain has been lost" - Domain Admin accounts can log in without
problem.
Have been working on it for two weeks and tried most of the things that I have found in others questions for related
DCDIAG results (run on DC VM) - More errors appear if run on the Server (Locator DcGetDcName(GC_Server_Required) call failed, error 1722 (same for PDC, TIME, GOOD_TIME, and KDC)
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC1
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
......................... DC1 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC1 failed test FrsEvent
Starting test: DFSREvent
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
......................... DC1 passed test SysVolCheck
Starting test: KccEvent
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
......................... DC1 passed test ObjectsReplicated
Starting test: Replications
......................... DC1 passed test Replications
Starting test: RidManager
......................... DC1 passed test RidManager
Starting test: Services
......................... DC1 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x80040022
Time Generated: 01/15/2015 19:32:28
Event String:
The driver disabled the write cache on device \Device\Harddisk0\DR0.
A warning event occurred. EventID: 0x80040022
Time Generated: 01/15/2015 19:32:28
Event String:
The driver disabled the write cache on device \Device\Harddisk0\DR0.
A warning event occurred. EventID: 0x80040022
Time Generated: 01/15/2015 19:32:28
Event String:
The driver disabled the write cache on device \Device\Harddisk0\DR0.
A warning event occurred. EventID: 0x000003F6
Time Generated: 01/15/2015 19:32:52
Event String:
Name resolution for the name DC1.Home.xxx.com timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0xC00038D6
Time Generated: 01/15/2015 19:33:25
Event String:
The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
A warning event occurred. EventID: 0x00000420
Time Generated: 01/15/2015 19:33:29
Event String:
The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service. This is not a recommended security configuration.
Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool.
A warning event occurred. EventID: 0x00002724
Time Generated: 01/15/2015 19:33:33
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
A warning event occurred. EventID: 0x000727AA
Time Generated: 01/15/2015 19:36:34
Event String:
The WinRM service failed to create the following SPNs: WSMAN/DC1.Home.xxx.com; WSMAN/DC1.
A warning event occurred. EventID: 0x00001695
Time Generated: 01/15/2015 19:59:52
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'Home.xxx.com.' failed. These records are used by other computers to locate this server as a domain controller (if the specified
domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 01/15/2015 19:59:52
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'DomainDnsZones.Home.xxx.com.' failed. These records are used by other computers to locate this server as a domain controller
(if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 01/15/2015 19:59:52
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'ForestDnsZones.Home.xxx.com.' failed. These records are used by other computers to locate this server as a domain controller
(if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x00000420
Time Generated: 01/15/2015 20:20:21
Event String:
The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service. This is not a recommended security configuration.
Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool.
A warning event occurred. EventID: 0x00002724
Time Generated: 01/15/2015 20:20:25
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
......................... DC1 failed test SystemLog
Starting test: VerifyReferences
......................... DC1 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Home
Starting test: CheckSDRefDom
......................... Home passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Home passed test CrossRefValidation
Running enterprise tests on : Home.xxx.com
Starting test: LocatorCheck
......................... Home.xxx.com passed test LocatorCheck
Starting test: Intersite
......................... Home.xxx.com passed test Intersite
All PCs can ping the DC, and get name resolution. Checked IPs, DNS on both WS and DC (DC points to its own IP address with no other DNS), Forwarders for DNS appear to be working,
as normal DNS name resolution and internet access works on all PCs. Have tried disabling NIC card and installing another NIC. All searches keep pointing back at the same things that I have tried. I feel like I am missing something stupid.
Please helpThe backup you used is too old. That is why your clients are experiencing trust relationship failures: the computer passwords are no longer matching so they are failing to connect to AD. You need to disjoin and join them again.
I understand that this is the only DC you have so please make sure that the DC is not multihomed, that it points to its private IP address as primary DNS server and 127.0.0.1 as secondary one. Also, you might need to rebuild your SYSVOL folder if you keep
getting the SYSVOL errors: https://support.microsoft.com/kb/315457?wa=wsignin1.0
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Is it possible to create APEX user in background?
Hi experts,
I have a page to create new user with the following items in an application:
P1_USER_ID
P1_EMAIL
P1_PASSWORD
It is using Automatic Row Processing (DML) to insert these to PEOPLE table.
When submit it above in the same time, I would like to create APEX's user using the values which are specified on it above.
I think that I can use APEX_UTIL.CREATE_USER, but the user who log into the current application with APEX authentication does not have admin privilege. I guess that the operation might fail. Correct?
Or, is it possible to create APEX user without admin privs if it is background?
Thanks in advance,
RuiHello,
>> but the user who log into the current application with APEX authentication does not have admin privilege. I guess that the operation might fail. Correct?
Yes, correct. To execute APEX_UTIL.CREATE_USER, the current user must have administrative privileges - http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10499/api.htm#BABCFBGG .
>> Or, is it possible to create APEX user without admin privs if it is background?
I don’t see the relevance of a background process, in this context. The admin privileges demand is there to prevent un-authorized users to open new users, without any control. It seems to me like a recipe for chaos to allow every user to define new users in the application.
Regards,
Arie. -
How to get real time information about how many user are logged in and thei
I use tomcat as my server platform in Ubuntu for a war file.
I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionListener in web.xml of tomcat. From other users' experiences, the configuration is complexed and has some errors.
Here's the link:http://www.stardeveloper.com/article...1112001&page=1
In order to get users' ip, in jsp, use request.getremotehost() or
request.getremoteaddress() by editing the jsp file.
I wonder if there's some open source software to use for these two purposes.
Thank you!That url is missing a few bits. The ... in the middle doesn't help.
we can count how many active sessions exist by a SessionCounter code.
However, I have to permit HttpSessionListener in web.xml of tomcat.
From other users' experiences, the configuration is complexed and has some errors.And have you tried it? The configuration isn't that complex.
What errors do you mean? Errors in tracking people, variance in the count? Probably related to internet issues and nothing you can do will alleviate them. -
10gR3 installation issue (#1): User Activity portlet not working
I installed a clean 10gR3, full install in windows / sql server. I haven't installed anything that didn't come included, so no analytics / publisher / collab / etc. The documentation is somewhat lacking, but I don't think I did anything wrong.
So when I added the User Status and User Activity portlets to a my page, the user status portlet works, but the user Activity portlet doesn't show any of my previous statuses.
I looked in my Notification (CNS) database, and I can see my old status, so I know that they are getting in there correctly.
Looking at PTSPY, there seems to be some issue with a login token (and yes, I did copy the value from PTSERVERCONFIG wtih settingid 65 into the configurator).
the following is what is displayed in PTSPY when the portlet refresh button is clicked on the User Activities portlet. As you can see, there is a lot of 'guest user', even though I am logged in as administrator.
ALI Logging Spy Version 6.1
** Log file written at 4-10-2009 11:50:51.
ID DATE TIME LEVEL COMPONENT APPLICATION THREAD LOCATION MESSAGE
== ====== ======== ==== ========= =========== ===== ======== =======
0 4-10-2009 11:50:25.327 Action UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.interpreter.Interpreter Entering handleRequest: GET http://localhost:80/portal/server.pt/gateway/PTARGS_6_0_203_0_100_43/ <ptLogMsgEnd>
1 4-10-2009 11:50:25.327 Action Gateway portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Entering HandleGatewayRequest: GET http://localhost:80/portal/server.pt/gateway/PTARGS_6_0_203_0_100_43/ <ptLogMsgEnd>
2 4-10-2009 11:50:25.327 Info Gateway portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Current user: 1, Administrator <ptLogMsgEnd>
3 4-10-2009 11:50:25.327 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.login.SSOAuthenticator SSO is disabled globally. <ptLogMsgEnd>
4 4-10-2009 11:50:25.327 Info Core portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.core.PTBaseObjectManager Opening and querying for object with Id: 203 and Class Id: 43 <ptLogMsgEnd>
5 4-10-2009 11:50:25.397 Info PortletProvider portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.CSPPortletProvider CSPPortletProvider.GetContentURL, content ID is 5, URL is http://house-2aojhum1o:21030/activityservice/useractivityfeed.jsf <ptLogMsgEnd>
6 4-10-2009 11:50:25.397 Info PortletProvider portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.CSPPortletProvider Portlet ID 203, User ID 1 = CSPPortletProvider.GetContent accessing [http://house-2aojhum1o:21030/activityservice/useractivityfeed.jsf] <ptLogMsgEnd>
7 4-10-2009 11:50:25.397 Info PortletProvider portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.CSPPortletProvider Portlet ID 203, User ID 1 = CSPPortletProvider.GetContent: Gateway timeout is set to 1200000 ms. <ptLogMsgEnd>
8 4-10-2009 11:50:25.397 Info PortletProvider portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.CSPRequest CSPRequest : setting HTTP method to GET <ptLogMsgEnd>
9 4-10-2009 11:50:25.407 Info Core portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.core.TokenUtility PTTokenUtility::CreateToken TOKENS: Creating token for: 1|1239378925| <ptLogMsgEnd>
10 4-10-2009 11:50:25.537 Action UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Entering handleRequest: GET http://localhost:80/portal/server.pt/gateway/PTARGS_0_0_206_0_0_47/cns/rss/2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml <ptLogMsgEnd>
11 4-10-2009 11:50:25.547 Action Gateway portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Entering HandleGatewayRequest: GET http://localhost:80/portal/server.pt/gateway/PTARGS_0_0_206_0_0_47/cns/rss/2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml <ptLogMsgEnd>
12 4-10-2009 11:50:25.557 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.TokenAuthenticator TokenAuthenticator::UseThisAuth: checking if there's a replication token. <ptLogMsgEnd>
13 4-10-2009 11:50:25.557 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.Authenticator Logging in as guest user: 2 <ptLogMsgEnd>
14 4-10-2009 11:50:25.557 Info Portal_UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portaluiinfrastructure.login.PTLoginHelper Entering attemptGuestLogin(), guest userid = 2 <ptLogMsgEnd>
15 4-10-2009 11:50:25.557 Info Portal_UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portaluiinfrastructure.login.PTLoginHelper Entering internalLogin() <ptLogMsgEnd>
16 4-10-2009 11:50:25.557 Info Core portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.server.impl.core.PTSession Connected as user "Guest" <ptLogMsgEnd>
17 4-10-2009 11:50:25.557 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.LoginHelper Entering DoTasksAfterLogin() <ptLogMsgEnd>
18 4-10-2009 11:50:25.557 Info Portal_UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper Entering CachePersonalSettings() <ptLogMsgEnd>
19 4-10-2009 11:50:25.557 Info Core portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.server.impl.core.PTBaseObjectManager Opening and querying for object with Id: 2 and Class Id: 1 <ptLogMsgEnd>
20 4-10-2009 11:50:25.597 Warning Portal_Common portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.pei.PTLoginActions Unable to find browser locale list to map locale to ui supported locale from accept-language header . Using default system locale. <ptLogMsgEnd>
21 4-10-2009 11:50:25.597 Info Portal_Common portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.pei.PTLoginActions Setting user language based on supported locale of en-us from accept-language header <ptLogMsgEnd>
22 4-10-2009 11:50:25.597 Info Gateway portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Current user: 2, Guest <ptLogMsgEnd>
23 4-10-2009 11:50:25.597 Info Gateway portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Redirecting to login page due to insufficient privileges. <ptLogMsgEnd>
24 4-10-2009 11:50:25.597 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.Authenticator Redirecting to login space Login <ptLogMsgEnd>
25 4-10-2009 11:50:25.597 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.Redirect Attempting to use SetSpaceCreateNew method with a null parent AActivitySpace. <ptLogMsgEnd>
26 4-10-2009 11:50:25.597 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.SSOAuthenticator SSO is disabled globally. <ptLogMsgEnd>
27 4-10-2009 11:50:25.597 Info Gateway portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers HandleGatewayRequest returning control to Interpreter to process login page. <ptLogMsgEnd>
28 4-10-2009 11:50:25.597 Action Gateway portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Leaving HandleGatewayRequest (returning control flow to the interpreter) - User ID: 2 <ptLogMsgEnd>
29 4-10-2009 11:50:25.597 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.TokenAuthenticator TokenAuthenticator::UseThisAuth: checking if there's a replication token. <ptLogMsgEnd>
30 4-10-2009 11:50:25.597 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Current user: 2, Guest <ptLogMsgEnd>
31 4-10-2009 11:50:25.597 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Redirecting to http://localhost/portal/server.pt?redirect=http%3A%2F%2Flocalhost%2Fportal%2Fserver.pt%2Fgateway%2FPTARGS_0_0_206_0_0_47%2Fcns%2Frss%2F2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml&space=Login&cached=false <ptLogMsgEnd>
32 4-10-2009 11:50:25.607 Action UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Leaving handleRequest - User ID: 2 <ptLogMsgEnd>
33 4-10-2009 11:50:25.697 Action UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Entering handleRequest: GET http://localhost:80/portal/server.pt?redirect=http%3A%2F%2Flocalhost%2Fportal%2Fserver.pt%2Fgateway%2FPTARGS_0_0_206_0_0_47%2Fcns%2Frss%2F2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml&space=Login&cached=false <ptLogMsgEnd>
34 4-10-2009 11:50:25.697 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.TokenAuthenticator TokenAuthenticator::UseThisAuth: checking if there's a replication token. <ptLogMsgEnd>
35 4-10-2009 11:50:25.697 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.Authenticator Logging in as guest user: 2 <ptLogMsgEnd>
36 4-10-2009 11:50:25.697 Info Portal_UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portaluiinfrastructure.login.PTLoginHelper Entering attemptGuestLogin(), guest userid = 2 <ptLogMsgEnd>
37 4-10-2009 11:50:25.697 Info Portal_UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portaluiinfrastructure.login.PTLoginHelper Entering internalLogin() <ptLogMsgEnd>
38 4-10-2009 11:50:25.697 Info Core portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.server.impl.core.PTSession Connected as user "Guest" <ptLogMsgEnd>
39 4-10-2009 11:50:25.707 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.login.LoginHelper Entering DoTasksAfterLogin() <ptLogMsgEnd>
40 4-10-2009 11:50:25.707 Info Portal_UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper Entering CachePersonalSettings() <ptLogMsgEnd>
41 4-10-2009 11:50:25.707 Info Core portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.server.impl.core.PTBaseObjectManager Opening and querying for object with Id: 2 and Class Id: 1 <ptLogMsgEnd>
42 4-10-2009 11:50:25.717 Warning Portal_Common portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.pei.PTLoginActions Unable to find browser locale list to map locale to ui supported locale from accept-language header . Using default system locale. <ptLogMsgEnd>
43 4-10-2009 11:50:25.717 Info Portal_Common portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.pei.PTLoginActions Setting user language based on supported locale of en-us from accept-language header <ptLogMsgEnd>
44 4-10-2009 11:50:25.717 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Current user: 2, Guest <ptLogMsgEnd>
45 4-10-2009 11:50:25.717 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.MVCController Current space is Login <ptLogMsgEnd>
46 4-10-2009 11:50:25.727 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.MVCController Redirect after login QS param: http://localhost/portal/server.pt/gateway/PTARGS_0_0_206_0_0_47/cns/rss/2432353235346261352D396130342D346665372D396538362D3661326262363961643535342433354445364146382D414242362D346539622D423445312D44314643343932463242453800000005.xml <ptLogMsgEnd>
47 4-10-2009 11:50:25.727 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.MVCController current control is DefaultLoginControl <ptLogMsgEnd>
48 4-10-2009 11:50:25.727 Info UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Displaying page Login <ptLogMsgEnd>
49 4-10-2009 11:50:25.727 Info Portal_Common portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.common.uiparts.PlumtreeDP Displaying page layout Base Page using Page Layout with ID 40 <ptLogMsgEnd>
50 4-10-2009 11:50:25.747 Info Portal_Common portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.portalpages.common.uiparts.PlumtreeDP Displaying page layout Login Page using Page Layout with ID 46 <ptLogMsgEnd>
51 4-10-2009 11:50:25.757 Action UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #8 com.plumtree.uiinfrastructure.interpreter.Interpreter Leaving handleRequest - User ID: 2 <ptLogMsgEnd>
52 4-10-2009 11:50:25.918 Error Storybook Logger activityservice.house-2aojhum1o.Administrator http-21030-exec-3 java.lang.Class Error in retrieving CNS feed: com.sun.syndication.io.ParsingFeedException: Invalid XML: Error on line 1: White spaces are required between publicId and systemId.
com.sun.syndication.io.ParsingFeedException: Invalid XML: Error on line 1: White spaces are required between publicId and systemId.
at com.sun.syndication.io.WireFeedInput.build(WireFeedInput.java:182)
at com.sun.syndication.io.SyndFeedInput.build(SyndFeedInput.java:122)
at com.bea.shaboo.impl.support.UserActivityBean.getActivityList(UserActivityBean.java:74)
at com.bea.shaboo.impl.support.UserActivityBean.getActivityStreamModel(UserActivityBean.java:177)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.myfaces.el.PropertyResolverImpl.getProperty(PropertyResolverImpl.java:400)
at org.apache.myfaces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:71)
at org.apache.myfaces.el.ELParserHelper$MyPropertySuffix.evaluate(ELParserHelper.java:532)
at org.apache.commons.el.ComplexValue.evaluate(ComplexValue.java:145)
at org.apache.myfaces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:378)
at javax.faces.component.UIData.getValue(UIData.java:779)
at org.apache.myfaces.component.html.ext.HtmlDataTableHack.createDataModel(HtmlDataTableHack.java:350)
at org.apache.myfaces.component.html.ext.HtmlDataTableHack.getDataModel(HtmlDataTableHack.java:333)
at org.apache.myfaces.component.html.ext.HtmlDataTableHack.getRowCount(HtmlDataTableHack.java:75)
at org.apache.myfaces.custom.datalist.HtmlListRenderer.encodeChildren(HtmlListRenderer.java:107)
at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:319)
at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:343)
at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:251)
at org.apache.myfaces.taglib.UIComponentBodyTagBase.doEndTag(UIComponentBodyTagBase.java:55)
at org.apache.jsp.useractivityfeed_jsp._jspx_meth_t_005fdataList_005f0(useractivityfeed_jsp.java:442)
at org.apache.jsp.useractivityfeed_jsp._jspx_meth_h_005fform_005f0(useractivityfeed_jsp.java:247)
at org.apache.jsp.useractivityfeed_jsp._jspx_meth_f_005fview_005f0(useractivityfeed_jsp.java:178)
at org.apache.jsp.useractivityfeed_jsp._jspService(useractivityfeed_jsp.java:108)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:654)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:445)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:379)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:292)
at org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:415)
at org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:234)
at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:352)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:107)
at org.apache.myfaces.webapp.MyFacesServlet.service(MyFacesServlet.java:74)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.RequestedUserFilter.doFilter(RequestedUserFilter.java:61)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.AccountCreationFilter.doFilter(AccountCreationFilter.java:57)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.KodoSessionFilter.doFilter(KodoSessionFilter.java:52)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.ShabooSecurityFilter.doFilter(ShabooSecurityFilter.java:74)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.bea.shaboo.impl.servlet.InitializationCheckFilter.doFilter(InitializationCheckFilter.java:42)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
at org.apache.coyote.http11.Http11NioProcessor.process(Http11NioProcessor.java:887)
at org.apache.coyote.http11.Http11NioProtocol$Http11ConnectionHandler.process(Http11NioProtocol.java:696)
at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.run(NioEndpoint.java:2009)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.jdom.input.JDOMParseException: Error on line 1: White spaces are required between publicId and systemId.
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:468)
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:851)
at com.sun.syndication.io.WireFeedInput.build(WireFeedInput.java:178)
... 71 more
Caused by: org.xml.sax.SAXParseException: White spaces are required between publicId and systemId.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.fatalError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLScanner.reportFatalError(Unknown Source)
at org.apache.xerces.impl.XMLScanner.scanExternalID(Unknown Source)
at org.apache.xerces.impl.XMLDocumentScannerImpl.scanDoctypeDecl(Unknown Source)
at org.apache.xerces.impl.XMLDocumentScannerImpl$PrologDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
at org.jdom.input.SAXBuilder.build(SAXBuilder.java:453)
... 73 more
<ptLogMsgEnd>
53 4-10-2009 11:50:26.128 Info PortletProvider portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.CSPPortletProvider CSPPortletProvider.GetContent: Receieved full response. Request state is [Processing of this request has completed successfully.] <ptLogMsgEnd>
54 4-10-2009 11:50:26.128 Info Transformers portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.transformers.TurboParser found unique namespace token '$PORTLET_ID$' <ptLogMsgEnd>
55 4-10-2009 11:50:26.128 Info Transformers portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.transformers.TurboParser found a token <ptLogMsgEnd>
56 4-10-2009 11:50:26.128 Info PortletProvider portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.server.impl.portlet.providers.GatewayContent GatewayContent : constructing text response with status code 200 and Content-Type text/html <ptLogMsgEnd>
57 4-10-2009 11:50:26.128 Info Gateway portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Displaying page GatewayBinary <ptLogMsgEnd>
58 4-10-2009 11:50:26.138 Action Gateway portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.activityspace.utils.GatewayHandlers Leaving HandleGatewayRequest (request completed) - User ID: 1 <ptLogMsgEnd>
59 4-10-2009 11:50:26.138 Action UI_Infrastructure portal.house-2aojhum1o.Administrator .NET #1 com.plumtree.uiinfrastructure.interpreter.Interpreter Leaving handleRequest - pre filter terminated execution. <ptLogMsgEnd>I had the same problem. I identified some issues with the way this portlet works. There is a work around, but not a good one. To fix this portlet, I had to go into config manager, 'Aqualogic Notification Service -> RSS Feeds' and uncheck 'Gateway RSS Feed URLs'. This makes that portlet work properly, the side effect is that it breaks all of the RSS Feeds in collab. So, to get around that you have to go add a gateway config to all of the collab portlets' web services... I meant to submit a trouble ticket, but never got around to it. We aren't using that portlet currently, so I bailed on the work around.
Maybe you are looking for
-
Hi, I have an older MacBook Pro 15" (2.16 GHz) whose optical drive is no longer recognized. I have purchased an external drive as replacement. My question is whether removing the optical drive will make my MacBook clumsy because of weight distributio
-
Aperture 3 keyword list won't go away
as i am entering keywords in the keyword toolbar (not HUD), the transparent autofill box appears with suggestions to autofill. if i were to delete as i enter and try to stop keywording (go back to editing, naming versions, anything else), the auto-fi
-
Contract to purchase requisition
Hi! I have this situation: I want to creat a contract with reference to a purchase requisition and I'd want to divide the quantity of the purchase requisition. For exemple: I created a purchase requisition with 100 quantity. Now I'd like to creat a c
-
i had been using Silverfast SE to scan from photoshop CS2 now upgraded to leopard, and seems like its not compatible with OS 10.5 using a umax/powerlook 1000. plug-in doesn't appear in photoshop/import window. any luck out there, or can someone recom
-
REG: Tracking Number Generation from Handling Unit Number
Hi All, I have a scenario where I need to generate the Tracking numbers from the handling Unit Numbers. For a Delivery : Handling Unit entry exists but there is no entry for the Tracking Number. I am basically a ABAPPER and now need the Steps/Logic