APIC Setting

Hi all,
Posted this question a while ago and never got any replies - I'm still searching for an answer with no luck. A while ago I posted a problem regarding low cpu performance when benchmarking, which is now solved. I checked my IRQ's and noticed 'Microsoft ACPI-Compliant System' was sharing IRQ 22 with my Network controller. Went into BIOS and disabled APIC in the BIOS and now it has IRQ 9 all to itself and the problem is solved.
What's with this BIOS setting? My understanding - from reading other threads regarding the setting - was that it enabled the OS to have extra IRQ's available (eg, 16-23 or whatever), and it should be enabled. The only difference it seems to make on my system is either 'microsoft-ACPI.....' sharing an IRQ if enabled or getting it's own IRQ when disabled - the latter resulting in much better performance. I still have the same amount of IRQ's either way. BTW, The setting was enabled when I installed XP Pro.
Any ideas?
Mick

Quote
Originally posted by epacifist
Sorry dude, but I tried disabling the APIC setting in the BIOS of my 875P and I didn't get any performance jump; all tests returned usual results.
Perhaps you lumped a number of changes, together, that caused the difference in benchmarking scores?
I just tried something else:
If I use my old D-Link network card for my internet connection, the problem doesn't occur. When I use the card "Microsoft ACPI-Compliant system" gets IRQ 20 all to itself.
When I use onboard LAN for internet with APIC enabled, I get a 20% cpu performance drop. When using onboard LAN, "Microsoft ACPI-Compliant system" shares IRQ 20 with "Network Controller".
So it seems with my system it seems that with APIC enabled I need to use a network card to avoid IRQ sharing for "Microsoft ACPI-Compliant system" .
Mick

Similar Messages

  • APIC setting in BIOS

    Hi all,
    Yesterday I posted a problem regarding low cpu performance, which is now solved. I checked my IRQ's and noticed 'Microsoft ACPI-Compliant System' was sharing IRQ 22 with my Network controller. Went into BIOS and disabled APIC in the BIOS and now it has IRQ 9 all to itself and the problem is solved.
    What's with this BIOS setting? My understanding - from reading other threads regarding the seting - was that it enabled the OS to have extra IRQ's available (eg, 16-23 or whatever), and it should be enabled. The only difference it seems to make on my system is either 'microsoft-ACPI.....' sharing an IRQ if enabled or getting it's own IRQ when disabled - the latter resulting in much better performance. I still have the same amount of IRQ's either way. BTW, The setting was enabled when I installed XP Pro.
    Any ideas?
    Mick

    msi 6378 motherboard
    AMD 1.3ghz
    256mb sdram
    Maxtor 40 gig h/d
    Exelstor 60 Gig h/d
    Onboard graphics and sound
    Bios vers.6.00pg ? dont know if this is correct used info view to find this?
    Nec 1300a dvd burner
    win xp pro
    Encer 350W psu (3.3v-20A//5v-25A//12v-12A

  • SG Audigy 4 Pro hangs on Win XP shutdo

    This only happens with full installation of software. I used the web site to update everything. Maybe I did it out of order. I don't know, but I've tried 3 times. Same results. I like to use all the full functions of the hardware & software, but I have to force a hard shutdown of my computer if I have full software installed. I don't mind ussing /buying another software package to run on this hardware if it solves my problem. Any good ideas. As always the tech support is not only costly, but useless! Aloha, David. Feel free to email me directly [email][email protected]][email protected][/url]

    Hi,
    blackangel: You haven't got an active network (cable modem etc.) connected to your onboard Ethernet have you?
    This can stop XP in it's tracks, so can a PCI RAID card (I know this from personal experience).
    I doubt it's your PSU (although it is possible) I run my board with a Mickey Mouse 300 Watt PSU (unbranded - cost £5-£10, at most). I was using a Q-Tec 550W until recently but I decided to clean and store it as my machine works perfectly well with the generic (e-star PC Case) supply - no sudden restarts, crashes or BSODs.
    PSU is:  
    +3.3v  20A
    +5v    30A
    +12v   13A
    3.3v and 5.5v combined 160W  - Just in case anyone's interested  :D
    Check APIC setting in your BIOS is set to enabled, on more than one occasion I was unable to boot XP (after install) with it disabled.
    There may be other settings in your BIOS that the XP install doesn't like - run through them to make sure nothing's amiss, try disabling the PNP OS setting also (If you haven't already.)  
    Also, as gfilitti has mentioned - is your Windows XP disc an original or a "Backup"? Your problems may just be down to a dodgy CD.
    I suspect (as do previous posters) you may have a memory problem. I use two sticks of A-Data memory (see sig) at £18.00 a pop you can't go wrong - had no problems at all with my memory!
    Last but not least, is your HD connected to your MoBo properly? - As far as I know you should be using an 80 conductor UDMA ATA cable, the Red or blue connector to your motherboard,  Master device connected to the black end (usually) and your slave device to the centre (grey) connector. Getting these confused can cause a multitude of ills.
    Forgive me if I'm stating the obvious - or you've tried all this before.
    Anyway, when you have fixed it - let us know how.
    Axel  :D

  • Win98 SE or ME for DOS game support?

    I want my DOS games back so I'm going to install either Win 98 SE or Win ME on a separate HD (my primary master HD is connected through a removeable HD bay :)
    I would appreciate your reasoning & recommendations one way or the other regarding which OS to choose.
    I have read in other posts that my APIC setting may be a factor so I'm ready to tackle that issue.  The only other factor I have in mind at the moment is that I KNOW these games worked great under Win98 First Ed, but WinME still has a bit of MS upgrade support built in.
    Thanks in advance.

    I would recommend 98SE over ME.  Millennium was no improvement over 98SE and its half-baked implementation of PC Health, System File Protection, and System Restore did little more than make your system less responsive and offer a false sense of security.
    I tried rolling back to a restore point on ME several times (on a few different computers) and the f-cker always reported 'Windows is unable to restore your computer using this restore point, please select another restore point and try again' or something along those lines.
    Windows ME is in the same extended support phase as 98SE and MS will continue to support security updates for MSIE on 98SE until 2006.  Most third-party drivers released for ME will work fine with 98SE.  Remember, DOS was 'removed' from ME, too (not really, just hidden).
    BTW, if you search google or yahoo for keywords 'dos games xp' or some variation, you will find numerous tips and articles.  And don't forget dual-boot:
    How to Multiple Boot Windows XP, Windows 2000, Windows NT, Windows 95, Windows 98, Windows Me, and MS-DOS
    How To Create a Multiple-Boot System in Windows XP

  • PCI/AGP IRQ conflict in Win2000

    [size=11]Frenchy writing from France[/SIZE]
    Angry & impatient I am, but first things first, my specs:
    PSU: Antec Trueblue 480W
    Mboard: K7N2 Delta-L, BIOS 5.2
    RAM: 2*512 Mb PC3200 Samsung, set at 400Mhz
    CPU: Athlon XP 2400+, set(o/c) at 11*200 (thus 1:1 with RAM)
    Winfast Geforce 4Ti 4200 AGP 4X
    Creative SBlive 1024 now in PCI slot 3
    HSF: Taisol CGK760172, fan in extraction mode (to reduce chipset temp by 5°C!!!)
    Enermax 80mm case fan
    Two recent HDDs (Maxtor) & optical drives (Liteon)
    USB ADSL modem
    APIC disabled
    OS: Microsh*t Windows 2000, SP4
    System status: CPU 49°C, chipset 47°C (weather temp: 41°C!)
    Here goes:
    My system sometimes crashes when I simultaneously play a movie, and an mp3 (I get a "sound loop", system freezes, no blue screen but I need to reboot) or on even rarer occasions (only once, actually) when I send an email (this time I got the dreaded blue screen.
    I have pinpointed a possible and highly probable cause for this: my Vcard and soundcard share the same IRQ (IRQ11 to be precise). My SBlive used to be on PCI slot 2. This was (and still is!) my IRQ share/conflicts table:
    [size=11]
    IRQ 11   OpenHCD standard USB Host Controller
    IRQ 11   OpenHCD standard USB Host Controller
    IRQ 11   Standard Enhanced PCI to USB Host Controller
    IRQ 11   Creative SB Live! Value
    IRQ 11   NVIDIA GeForce4 Ti 4200
    [/SIZE]
    IRQ11 is thus not shared only by the Vcard & sound card, but something told me that the first 3 lines of the table did not matter, however I've often heard (and read, even in this forum) that having a graphics card & sound card share the same IRQ is definitely not a good idea and should be avoided by all means.
    Forgive my lack of knowledge, for I'm but a mere newbie in this matter. This I tried:
    - Enabling APIC (whatever it is ?( I just know that it sort of "creates" more IRQs), to no avail: the number of IRQs, their layout and conflicts table remained unchanged.
    - Moving SBlive from slot 2 to slot 3 and reinstalling its drivers: NOTHING changed either, soundcard IRQ remained at 11 !!!  ?(  ?(  ?(
    Upon entering 'system properties' and 'devices', when selecting the SBlive card, in the 'resource' thumbnail, everything is greyed out, no parameters can be changed! Same thing applies to other devices such as Vcard, too...
    A most desperate situation this is, for it would seem that changing a PCI card's IRQ in Windows 2000 is simply IMPOSSIBLE, sacrebleu!
    Needless to say, this makes me mad X( , I mean really, really MAD
    [ALIGN=center][/ALIGN]  
    If anyone could help...

    [size=11]Quote
    Originally posted by wonkanoby
    just changing it makes no difference it must be enabled when the os is loaded
    [/SIZE]
    Changing WHAT??? If you mean the IRQ, as I said that seems impossible in Win2000 (if somehow could tell me how I'd be most grateful). If you meant changing APIC setting to 'enabled', how do I enable it in windows?
    But the question remains: how is it that when changing soundcard's PCI slot its IRQ remains unchanged?? ?(

  • K7N420 Pro Hangs on Win XP/2000 setup

    Hi,
    Win XP Pro SP1
    Athlon XP 1800+
    Maxtor 60 Gig
    256 DDR
    The Hard drive is blank. Boot from CDROM, Start Setup, Loads initial drivers, then stop on (starting windows). This is before you get to the screen to format drive as NTFS.
    Microsoft has an tech support page about this and Nvidia chipsets. They suggest starting with another video card in the PCI slot, but that has not worked.
    I searched the forum and could not find a similar problem. In fact there seems to be a lot of people running xp and 2000 on this motherboard.
    What am I doing wrong??
    Thanks for your time and help,
    BA

    Hi,
    blackangel: You haven't got an active network (cable modem etc.) connected to your onboard Ethernet have you?
    This can stop XP in it's tracks, so can a PCI RAID card (I know this from personal experience).
    I doubt it's your PSU (although it is possible) I run my board with a Mickey Mouse 300 Watt PSU (unbranded - cost £5-£10, at most). I was using a Q-Tec 550W until recently but I decided to clean and store it as my machine works perfectly well with the generic (e-star PC Case) supply - no sudden restarts, crashes or BSODs.
    PSU is:  
    +3.3v  20A
    +5v    30A
    +12v   13A
    3.3v and 5.5v combined 160W  - Just in case anyone's interested  :D
    Check APIC setting in your BIOS is set to enabled, on more than one occasion I was unable to boot XP (after install) with it disabled.
    There may be other settings in your BIOS that the XP install doesn't like - run through them to make sure nothing's amiss, try disabling the PNP OS setting also (If you haven't already.)  
    Also, as gfilitti has mentioned - is your Windows XP disc an original or a "Backup"? Your problems may just be down to a dodgy CD.
    I suspect (as do previous posters) you may have a memory problem. I use two sticks of A-Data memory (see sig) at £18.00 a pop you can't go wrong - had no problems at all with my memory!
    Last but not least, is your HD connected to your MoBo properly? - As far as I know you should be using an 80 conductor UDMA ATA cable, the Red or blue connector to your motherboard,  Master device connected to the black end (usually) and your slave device to the centre (grey) connector. Getting these confused can cause a multitude of ills.
    Forgive me if I'm stating the obvious - or you've tried all this before.
    Anyway, when you have fixed it - let us know how.
    Axel  :D

  • Setting up the APIC

    Hi all
    In the following process, if i lost the APIC  password ,  
    i would like to know how to re-set the APIC.
    The following is a sample of the initial setup dialog as displayed on the console:
    Cluster configuration ...
    Enter the fabric name [ACI Fabric1 #1]:
    Enter the number of controllers in the fabric (1-16) [3]:
    Enter the controller ID (1-3) [2]:
    Enter the controller name [apic2]:
    Enter address pool for TEP addresses [10.0.0.0/16]:
    Enter the VLAN ID for infra network (1-4094)[4093]: <<< This is for the physical APIC
    Enter the VLAN ID for infra network (1-4094) [4]: <<< This is for the Simulator
    Enter address pool for BD multicast addresses (GIPO) [225.0.0.0/15]:
    Out-of-band management configuration ...
    Enter the IP address for out-of-band management: 192.168.10.2/24
    Enter the IP address of the default gateway [None]: 192.168.10.254
    Enter the interface speed/duplex mode [auto]:
    Administrator user configuration...
    Enable strong passwords? [Y]
    Enter the password for admin:
    Thank you very much.
    Best regards
    Jong-wook

    Jong-wook,
    You have some options:
    A. Password Recovery
    Reseting APIC 'admin' password 
    1- Connect USB to the APIC. The USB is to contains single dummy file named 'aci-admin-passwd-reset'
    2- Reboot the APIC
    3- Interrupt the reboot when the prompt is shown "Press any key to enter the menu"
    4- The next screen will show version of Linux installed on the APIC
    5- Select the correct version 
    6- Type 'e' to edit this command
    7- Add "aci-admin-passwd-reset' to the end of the command and press enter
    8- Press 'b' to boot.
    9- the APIC will boot to a prompt and ask for the new 'admin' password
    B. You can download the APIC filename.iso from www.cisco.com
    http://software.cisco.com/download/release.html?mdfid=285968390&softwareid=286278832&release=1.0(1k)&relind=AVAILABLE&rellifecycle=&reltype=latest
    * Load the image filename using CIMC\KVM and attaching\mounting .iso
    * After the APIC firmware is loaded and reboots, it should boot up fresh and run thru the setup script again.
    Note: this option can take a good amount of time to complete. 
    C. As Ozden mentioned, open a Service Request with the Cisco TAC.
    I hope this works!
    T.

  • [Solved] Issue setting HDMI audio to default

    Hoping I'm not overlooking something very simple here.
    I have a Radeon HD4650 in my HTPC which I'm trying to run the audio through the HDMI output. I've set the kernel parameter "radeon.audio=1" and am able to hear sound through HDMI when I specify it manually within each application (for example XBMC or VLC going to Audio->Audio Device->HD-Audio Generic, HDMI 0 HDMI Audio Output).
    From there I tried to set the HDMI audio as default by following the wiki here:
    https://wiki.archlinux.org/index.php/Al … sound_card
    And here:
    https://wiki.archlinux.org/index.php/Al … s_not_work
    I've tried several combinations within my .asoundrc and asound.conf including:
    pcm.!default {
    type plug
    slave.pcm {
    @func getenv
    vars [ ALSAPCM ]
    default "hw:0,3"
    defaults.pcm.card 0
    defaults.pcm.device 3
    defaults.ctl.card 0
    pcm.!default "plughw:0,3"
    ctl.!default "plughw:0,3"
    pcm.dmixer {
    type dmix
    ipc_key 2048
    slave {
    pcm "hw:0,3"
    period_size 512
    buffer_size 4096
    rate 48000
    format S16_LE
    bindings {
    0 0
    1 1
    pcm.!default {
    type plug
    slave.pcm dmixer
    pcm:iec958 {
    type plug
    slave.pcm dmixer
    pcm.!default {
    type plug
    slave {
    pcm "hw:0,3"
    ctl.!default {
    type hw
    card 0
    Most of these I just copied from the wiki or various forum posts I found and edited the proper device in. These appear to work, as the HDMI card shows up as default in alsamixer (I've made sure everything is unmuted here), but selecting the default channel in VLC still results in no sound, not even from the built in audio (I can change the output to the HDMI option and it works fine).
    I've also tried this which results in no sound:
    aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    Is there something I'm missing here?
    Here's my aplay -l:
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    A quick note here: I set this option in /etc/modprobe.d/:
    options snd_hda_intel index=-2
    This moved the HDMI card up to device 0 instead of 1. I've tried everything above as well with plughw:1,3 when that was the HDMI device.
    aplay -L:
    null
    Discard all samples (playback) or generate zero samples (capture)
    hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
    sysdefault:CARD=Intel
    HDA Intel, ALC1200 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Digital
    IEC958 (S/PDIF) Digital Audio Output
    lsmod | grep snd:
    snd_hda_codec_hdmi 29701 1
    snd_hda_codec_realtek 35517 1
    snd_hda_intel 35309 0
    snd_hda_codec 147474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6332 1 snd_hda_codec
    snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    snd 58950 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5418 1 snd
    amixer -c 0:
    Simple mixer control 'PCM',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [on]
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013
    [ 0.000000] Command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ee6ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ee70000-0x000000007eecbfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007eecc000-0x000000007fdf4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fdf5000-0x000000007fe00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007fe01000-0x000000007fe97fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fe98000-0x000000007fee7fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007fee8000-0x000000007feebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007feec000-0x000000007fef0fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007fef1000-0x000000007fef1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fef2000-0x000000007fefefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007feff000-0x000000007fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
    [ 0.000000] [mem 0x7fa00000-0x7fbfffff] page 2M
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ee6ffff]
    [ 0.000000] [mem 0x7c000000-0x7edfffff] page 2M
    [ 0.000000] [mem 0x7ee00000-0x7ee6ffff] page 4k
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7eecc000-0x7f9fffff]
    [ 0.000000] [mem 0x7eecc000-0x7effffff] page 4k
    [ 0.000000] [mem 0x7f000000-0x7f9fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdf4fff]
    [ 0.000000] [mem 0x7fc00000-0x7fdf4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] [mem 0x7fe01000-0x7fe97fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] [mem 0x7fee8000-0x7feebfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] [mem 0x7fef1000-0x7fef1fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] [mem 0x7feff000-0x7fefffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x7e79a000-0x7ee6efff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
    [ 0.000000] ACPI: RSDT 000000007fefd038 0004C (v01 INTEL ECG3510M 00000076 01000013)
    [ 0.000000] ACPI: FACP 000000007fefc000 00074 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000007fef6000 05BEB (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000007fe98000 00040
    [ 0.000000] ACPI: APIC 000000007fef5000 00078 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 000000007fef4000 00040 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000007fef3000 0003C (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: ASF! 000000007fef2000 000A6 (v32 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007fef0000 0020C (v01 INTEL CpuPm 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feef000 001B7 (v01 INTEL Cpu0Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feee000 001B7 (v01 INTEL Cpu1Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feed000 001B7 (v01 INTEL Cpu2Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feec000 001B7 (v01 INTEL Cpu3Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    [ 0.000000] NODE_DATA [mem 0x7fe93000-0x7fe97fff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c600000-ffff88007e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008efff]
    [ 0.000000] node 0: [mem 0x00100000-0x7ee6ffff]
    [ 0.000000] node 0: [mem 0x7eecc000-0x7fdf4fff]
    [ 0.000000] node 0: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] node 0: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] node 0: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] node 0: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] On node 0 totalpages: 523716
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3982 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8124 pages used for memmap
    [ 0.000000] DMA32 zone: 519734 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000007ee70000 - 000000007eecc000
    [ 0.000000] PM: Registered nosave memory: 000000007fdf5000 - 000000007fe01000
    [ 0.000000] PM: Registered nosave memory: 000000007fe98000 - 000000007fee8000
    [ 0.000000] PM: Registered nosave memory: 000000007feec000 - 000000007fef1000
    [ 0.000000] PM: Registered nosave memory: 000000007fef2000 - 000000007feff000
    [ 0.000000] e820: [mem 0x80000000-0xffefffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86144 r8192 d24448 u524288
    [ 0.000000] pcpu-alloc: s86144 r8192 d24448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515507
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2042856k/2096128k available (4920k kernel code, 1264k absent, 52008k reserved, 4046k data, 1124k init)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2188.974 MHz processor
    [ 0.006671] Calibrating delay loop (skipped), value calculated using timer frequency.. 4379.36 BogoMIPS (lpj=7296580)
    [ 0.006675] pid_max: default: 32768 minimum: 301
    [ 0.006714] Security Framework initialized
    [ 0.006729] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006937] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008033] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.008556] Mount-cache hash table entries: 256
    [ 0.008842] Initializing cgroup subsys memory
    [ 0.008862] Initializing cgroup subsys devices
    [ 0.008864] Initializing cgroup subsys freezer
    [ 0.008866] Initializing cgroup subsys net_cls
    [ 0.008868] Initializing cgroup subsys blkio
    [ 0.008905] CPU: Physical Processor ID: 0
    [ 0.008907] CPU: Processor Core ID: 0
    [ 0.008910] mce: CPU supports 6 MCE banks
    [ 0.008918] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.009009] Freeing SMP alternatives: 20k freed
    [ 0.010372] ACPI: Core revision 20130328
    [ 0.013611] ACPI: All ACPI Tables successfully acquired
    [ 0.014894] ftrace: allocating 19564 entries in 77 pages
    [ 0.020479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055426] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.056666] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.056666] ... version: 2
    [ 0.056666] ... bit width: 40
    [ 0.056666] ... generic registers: 2
    [ 0.056666] ... value mask: 000000ffffffffff
    [ 0.056666] ... max period: 000000007fffffff
    [ 0.056666] ... fixed-purpose events: 3
    [ 0.056666] ... event mask: 0000000700000003
    [ 0.090007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.076769] smpboot: Booting Node 0, Processors #1
    [ 0.090021] Brought up 2 CPUs
    [ 0.090024] smpboot: Total of 2 processors activated (8759.72 BogoMIPS)
    [ 0.091305] devtmpfs: initialized
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7ee70000-0x7eecbfff] (376832 bytes)
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7fe98000-0x7fee7fff] (327680 bytes)
    [ 0.091305] RTC time: 21:34:09, date: 08/06/13
    [ 0.091305] NET: Registered protocol family 16
    [ 0.091305] ACPI: bus type PCI registered
    [ 0.091305] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.091305] PCI: not using MMCONFIG
    [ 0.091305] PCI: Using configuration type 1 for base access
    [ 0.093396] bio: create slab <bio-0> at 0
    [ 0.093411] ACPI: Added _OSI(Module Device)
    [ 0.093411] ACPI: Added _OSI(Processor Device)
    [ 0.093411] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.093411] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.094284] ACPI: EC: Look up EC in DSDT
    [ 0.097855] ACPI: Interpreter enabled
    [ 0.097864] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [ 0.097879] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.097881] ACPI: Using IOAPIC for interrupt routing
    [ 0.097896] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.098027] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
    [ 0.115962] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.116042] ACPI: No dock devices found.
    [ 0.121485] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.122691] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
    [ 0.122777] PCI host bridge to bus 0000:00
    [ 0.122781] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.122783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.122786] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.122788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.122791] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
    [ 0.122793] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
    [ 0.122795] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
    [ 0.122806] pci 0000:00:00.0: [8086:2980] type 00 class 0x060000
    [ 0.122920] pci 0000:00:01.0: [8086:2981] type 01 class 0x060400
    [ 0.122965] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.122994] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.123063] pci 0000:00:19.0: [8086:104b] type 00 class 0x020000
    [ 0.123081] pci 0000:00:19.0: reg 10: [mem 0x90b00000-0x90b1ffff]
    [ 0.123089] pci 0000:00:19.0: reg 14: [mem 0x90b24000-0x90b24fff]
    [ 0.123098] pci 0000:00:19.0: reg 18: [io 0x30c0-0x30df]
    [ 0.123156] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.123180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 0.123224] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.123264] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.123345] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.123387] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.123427] pci 0000:00:1a.1: reg 20: [io 0x3080-0x309f]
    [ 0.123507] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.123560] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.123579] pci 0000:00:1a.7: reg 10: [mem 0x90b25400-0x90b257ff]
    [ 0.123661] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.123725] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.123775] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.123790] pci 0000:00:1b.0: reg 10: [mem 0x90b20000-0x90b23fff 64bit]
    [ 0.123859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.123926] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.123974] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.124043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.124074] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.124118] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    [ 0.124188] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.124220] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.124264] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    [ 0.124333] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.124366] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.124414] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.124454] pci 0000:00:1d.0: reg 20: [io 0x3060-0x307f]
    [ 0.124522] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.124567] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.124607] pci 0000:00:1d.1: reg 20: [io 0x3040-0x305f]
    [ 0.124675] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.124717] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.124757] pci 0000:00:1d.2: reg 20: [io 0x3020-0x303f]
    [ 0.124827] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.124880] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.124899] pci 0000:00:1d.7: reg 10: [mem 0x90b25000-0x90b253ff]
    [ 0.124981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.125043] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.125088] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.125156] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.125205] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
    [ 0.125284] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.125289] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    [ 0.125293] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    [ 0.125376] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
    [ 0.125390] pci 0000:00:1f.2: reg 10: [io 0x3438-0x343f]
    [ 0.125399] pci 0000:00:1f.2: reg 14: [io 0x344c-0x344f]
    [ 0.125407] pci 0000:00:1f.2: reg 18: [io 0x3430-0x3437]
    [ 0.125415] pci 0000:00:1f.2: reg 1c: [io 0x3448-0x344b]
    [ 0.125423] pci 0000:00:1f.2: reg 20: [io 0x3410-0x341f]
    [ 0.125432] pci 0000:00:1f.2: reg 24: [io 0x3400-0x340f]
    [ 0.125461] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.125543] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.125555] pci 0000:00:1f.3: reg 10: [mem 0x90b25800-0x90b258ff]
    [ 0.125582] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.125683] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
    [ 0.125697] pci 0000:00:1f.5: reg 10: [io 0x3428-0x342f]
    [ 0.125706] pci 0000:00:1f.5: reg 14: [io 0x3444-0x3447]
    [ 0.125714] pci 0000:00:1f.5: reg 18: [io 0x3420-0x3427]
    [ 0.125722] pci 0000:00:1f.5: reg 1c: [io 0x3440-0x3443]
    [ 0.125730] pci 0000:00:1f.5: reg 20: [io 0x30f0-0x30ff]
    [ 0.125739] pci 0000:00:1f.5: reg 24: [io 0x30e0-0x30ef]
    [ 0.125768] pci 0000:00:1f.5: PME# supported from D3hot
    [ 0.125901] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
    [ 0.125917] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.125930] pci 0000:01:00.0: reg 18: [mem 0x90a00000-0x90a1ffff 64bit]
    [ 0.125939] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
    [ 0.125954] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.125992] pci 0000:01:00.0: supports D1 D2
    [ 0.126044] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
    [ 0.126060] pci 0000:01:00.1: reg 10: [mem 0x90a20000-0x90a23fff 64bit]
    [ 0.126130] pci 0000:01:00.1: supports D1 D2
    [ 0.126194] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.126198] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.126201] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.126206] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.126282] pci 0000:02:00.0: [1106:3432] type 00 class 0x0c0330
    [ 0.126300] pci 0000:02:00.0: reg 10: [mem 0x90900000-0x90900fff]
    [ 0.126416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.130024] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.130034] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.130126] pci 0000:03:00.0: [1131:7164] type 00 class 0x048000
    [ 0.130153] pci 0000:03:00.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.130174] pci 0000:03:00.0: reg 18: [mem 0x90400000-0x907fffff 64bit]
    [ 0.130281] pci 0000:03:00.0: supports D1 D2
    [ 0.130283] pci 0000:03:00.0: PME# supported from D0 D1 D2
    [ 0.136688] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.136698] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.136792] pci 0000:04:00.0: [197b:2368] type 00 class 0x010185
    [ 0.136823] pci 0000:04:00.0: reg 10: [io 0x1018-0x101f]
    [ 0.136837] pci 0000:04:00.0: reg 14: [io 0x1024-0x1027]
    [ 0.136851] pci 0000:04:00.0: reg 18: [io 0x1010-0x1017]
    [ 0.136866] pci 0000:04:00.0: reg 1c: [io 0x1020-0x1023]
    [ 0.136880] pci 0000:04:00.0: reg 20: [io 0x1000-0x100f]
    [ 0.136906] pci 0000:04:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.137025] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.137035] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.137039] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.137098] pci 0000:05:03.0: [1814:0301] type 00 class 0x028000
    [ 0.137116] pci 0000:05:03.0: reg 10: [mem 0x90800000-0x90807fff]
    [ 0.137237] pci 0000:05:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.137254] pci 0000:05:05.0: reg 10: [mem 0x90808000-0x90808fff]
    [ 0.137329] pci 0000:05:05.0: supports D1 D2
    [ 0.137331] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.137409] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
    [ 0.137415] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.137421] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.137423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.137426] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.137428] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
    [ 0.137431] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
    [ 0.137433] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
    [ 0.137455] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.137457] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.137544] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137753] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.137887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.138021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.138507] ACPI: Enabled 4 GPEs in block 00 to 1F
    [ 0.138515] acpi root: \_SB_.PCI0 notify handler is installed
    [ 0.138552] Found 1 acpi root devices
    [ 0.138645] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.138645] vgaarb: loaded
    [ 0.138645] vgaarb: bridge control possible 0000:01:00.0
    [ 0.138645] PCI: Using ACPI for IRQ routing
    [ 0.141702] PCI: pci_cache_line_size set to 64 bytes
    [ 0.141771] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
    [ 0.141774] e820: reserve RAM buffer [mem 0x7ee70000-0x7fffffff]
    [ 0.141776] e820: reserve RAM buffer [mem 0x7fdf5000-0x7fffffff]
    [ 0.141778] e820: reserve RAM buffer [mem 0x7fe98000-0x7fffffff]
    [ 0.141780] e820: reserve RAM buffer [mem 0x7feec000-0x7fffffff]
    [ 0.141782] e820: reserve RAM buffer [mem 0x7fef2000-0x7fffffff]
    [ 0.141784] e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    [ 0.141898] NetLabel: Initializing
    [ 0.141900] NetLabel: domain hash size = 128
    [ 0.141901] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.141917] NetLabel: unlabeled traffic allowed by default
    [ 0.141945] Switching to clocksource refined-jiffies
    [ 0.148603] pnp: PnP ACPI init
    [ 0.148630] ACPI: bus type PNP registered
    [ 0.148744] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
    [ 0.148747] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.148750] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.148753] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.148756] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.148758] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.148761] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.148764] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
    [ 0.148767] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
    [ 0.148769] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.148774] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.148919] pnp 00:01: [dma 4]
    [ 0.148948] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.148992] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.149031] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.149063] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.149126] system 00:05: [io 0x0500-0x053f] has been reserved
    [ 0.149129] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.149132] system 00:05: [io 0x0360-0x0361] has been reserved
    [ 0.149135] system 00:05: [io 0x0680-0x06ff] has been reserved
    [ 0.149139] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149220] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149501] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.149573] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.149624] pnp: PnP ACPI: found 9 devices
    [ 0.149626] ACPI: bus type PNP unregistered
    [ 0.156213] Switching to clocksource acpi_pm
    [ 0.156232] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.156236] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.156264] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.156267] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.156276] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.156279] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.156288] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
    [ 0.156291] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
    [ 0.156304] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156307] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156310] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.156313] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.156315] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156318] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156324] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156327] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156330] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
    [ 0.156334] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8600000-0xf88fffff pref]
    [ 0.156337] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.156340] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.156344] pci 0000:01:00.0: BAR 6: assigned [mem 0x90a40000-0x90a5ffff pref]
    [ 0.156348] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.156351] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.156355] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.156358] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156363] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.156366] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.156371] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.156375] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156381] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.156384] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.156389] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.156393] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156400] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8600000-0xf860ffff pref]
    [ 0.156402] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.156405] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.156410] pci 0000:00:1c.2: bridge window [mem 0xf8400000-0xf85fffff]
    [ 0.156414] pci 0000:00:1c.2: bridge window [mem 0xf8600000-0xf88fffff pref]
    [ 0.156421] pci 0000:00:1e.0: PCI bridge to [bus 05]
    [ 0.156425] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.156425] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.156425] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.156425] pci_bus 0000:01: resource 1 [mem 0x90a00000-0x90afffff]
    [ 0.156425] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156425] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.156425] pci_bus 0000:02: resource 1 [mem 0x90900000-0x909fffff]
    [ 0.156425] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156425] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.156425] pci_bus 0000:03: resource 1 [mem 0x90000000-0x907fffff]
    [ 0.156425] pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156425] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    [ 0.156425] pci_bus 0000:04: resource 1 [mem 0xf8400000-0xf85fffff]
    [ 0.156425] pci_bus 0000:04: resource 2 [mem 0xf8600000-0xf88fffff pref]
    [ 0.156425] pci_bus 0000:05: resource 1 [mem 0x90800000-0x908fffff]
    [ 0.156425] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:05: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:05: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] NET: Registered protocol family 2
    [ 0.156425] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.156425] TCP: reno registered
    [ 0.156425] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] NET: Registered protocol family 1
    [ 0.156791] pci 0000:01:00.0: Boot video device
    [ 0.156891] PCI: CLS 64 bytes, default 64
    [ 0.156941] Unpacking initramfs...
    [ 0.310182] Freeing initrd memory: 6996k freed
    [ 0.313496] Scanning for low memory corruption every 60 seconds
    [ 0.313787] audit: initializing netlink socket (disabled)
    [ 0.313804] type=2000 audit(1375824849.313:1): initialized
    [ 0.326819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.328674] VFS: Disk quotas dquot_6.5.2
    [ 0.328731] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.328948] msgmni has been set to 4003
    [ 0.329231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.329273] io scheduler noop registered
    [ 0.329276] io scheduler deadline registered
    [ 0.329310] io scheduler cfq registered (default)
    [ 0.329439] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.329503] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.329571] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.329644] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.329814] intel_idle: does not run on family 6 model 15
    [ 0.329849] GHES: HEST is not enabled!
    [ 0.329917] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.350447] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.350819] Linux agpgart interface v0.103
    [ 0.350895] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.353919] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.353952] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.354077] mousedev: PS/2 mouse device common for all mice
    [ 0.354143] rtc_cmos 00:02: RTC can wake from S4
    [ 0.354275] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.354297] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram
    [ 0.354307] cpuidle: using governor ladder
    [ 0.354309] cpuidle: using governor menu
    [ 0.354362] drop_monitor: Initializing network drop monitor service
    [ 0.354438] TCP: cubic registered
    [ 0.354554] NET: Registered protocol family 10
    [ 0.354764] NET: Registered protocol family 17
    [ 0.354780] Key type dns_resolver registered
    [ 0.355037] PM: Checking hibernation image partition /dev/system/swap
    [ 0.397240] PM: Hibernation image not present or could not be loaded.
    [ 0.397253] registered taskstats version 1
    [ 0.397804] Magic number: 9:719:600
    [ 0.397885] rtc_cmos 00:02: setting system clock to 2013-08-06 21:34:10 UTC (1375824850)
    [ 0.398920] Freeing unused kernel memory: 1124k freed
    [ 0.399295] Write protecting the kernel read-only data: 8192k
    [ 0.402578] Freeing unused kernel memory: 1212k freed
    [ 0.404163] Freeing unused kernel memory: 408k freed
    [ 0.412320] systemd-udevd[45]: starting version 204
    [ 0.417813] [drm] Initialized drm 1.1.0 20060810
    [ 0.423117] [drm] radeon kernel modesetting enabled.
    [ 0.423539] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE180).
    [ 0.423580] [drm] register mmio base: 0x90A00000
    [ 0.423582] [drm] register mmio size: 131072
    [ 0.424493] ATOM BIOS: CAICOS
    [ 0.424939] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 0.424942] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [ 0.425844] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 0.425848] [drm] RAM width 64bits DDR
    [ 0.425929] [TTM] Zone kernel: Available graphics memory: 1026308 kiB
    [ 0.425931] [TTM] Initializing pool allocator
    [ 0.425937] [TTM] Initializing DMA pool allocator
    [ 0.425964] [drm] radeon: 512M of VRAM memory ready
    [ 0.425966] [drm] radeon: 512M of GTT memory ready.
    [ 0.426256] radeon 0000:01:00.0: ffff88007e85a800 unpin not necessary
    [ 0.881477] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90008be6118
    [ 0.881489] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 0.882702] [drm] Loading CAICOS Microcode
    [ 0.901197] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 0.901323] radeon 0000:01:00.0: WB enabled
    [ 0.901327] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880079fd2c00
    [ 0.901330] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880079fd2c0c
    [ 0.903890] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc90009432118
    [ 0.903895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.903897] [drm] Driver supports precise vblank timestamp query.
    [ 0.903924] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 0.903940] radeon 0000:01:00.0: radeon: using MSI.
    [ 0.903977] [drm] radeon: irq initialized.
    [ 0.920415] [drm] ring test on 0 succeeded in 2 usecs
    [ 0.920480] [drm] ring test on 3 succeeded in 1 usecs
    [ 1.106683] [drm] ring test on 5 succeeded in 2 usecs
    [ 1.106688] [drm] UVD initialized successfully.
    [ 1.106780] [drm] Enabling audio support
    [ 1.106827] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 1.106873] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 1.259354] [drm] ib test on ring 5 succeeded
    [ 1.259721] [drm] Radeon Display Connectors
    [ 1.259723] [drm] Connector 0:
    [ 1.259725] [drm] HDMI-A-1
    [ 1.259726] [drm] HPD2
    [ 1.259729] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 1.259730] [drm] Encoders:
    [ 1.259732] [drm] DFP1: INTERNAL_UNIPHY1
    [ 1.259733] [drm] Connector 1:
    [ 1.259734] [drm] VGA-1
    [ 1.259736] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 1.259738] [drm] Encoders:
    [ 1.259739] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.259818] [drm] Internal thermal controller with fan control
    [ 1.260722] [drm] radeon: power management initialized
    [ 1.313356] tsc: Refined TSC clocksource calibration: 2188.999 MHz
    [ 1.313363] Switching to clocksource tsc
    [ 1.331618] [drm] fb mappable at 0x80375000
    [ 1.331620] [drm] vram apper at 0x80000000
    [ 1.331622] [drm] size 8294400
    [ 1.331623] [drm] fb depth is 24
    [ 1.331625] [drm] pitch is 7680
    [ 1.331702] fbcon: radeondrmfb (fb0) is primary device
    [ 1.544648] Console: switching to colour frame buffer device 240x67
    [ 1.550480] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 1.550482] radeon 0000:01:00.0: registered panic notifier
    [ 1.550488] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
    [ 1.551576] device-mapper: uevent: version 1.0.3
    [ 1.551788] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
    [ 1.584940] SCSI subsystem initialized
    [ 1.587002] ACPI: bus type ATA registered
    [ 1.587124] ACPI: bus type USB registered
    [ 1.587165] usbcore: registered new interface driver usbfs
    [ 1.587199] libata version 3.00 loaded.
    [ 1.587772] ata_piix 0000:00:1f.2: version 2.13
    [ 1.587914] ata_piix 0000:00:1f.2: MAP [
    [ 1.587916] P0 P2 P1 P3 ]
    [ 1.590067] usbcore: registered new interface driver hub
    [ 1.590515] usbcore: registered new device driver usb
    [ 1.591219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.591393] ehci-pci: EHCI PCI platform driver
    [ 1.592276] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592288] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
    [ 1.592501] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 1.592673] xHCI xhci_add_endpoint called for root hub
    [ 1.592675] xHCI xhci_check_bandwidth called for root hub
    [ 1.592706] hub 1-0:1.0: USB hub found
    [ 1.592713] hub 1-0:1.0: 1 port detected
    [ 1.592813] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592819] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
    [ 1.592917] xHCI xhci_add_endpoint called for root hub
    [ 1.592919] xHCI xhci_check_bandwidth called for root hub
    [ 1.592948] hub 2-0:1.0: USB hub found
    [ 1.592957] hub 2-0:1.0: 4 ports detected
    [ 1.593131] scsi0 : pata_jmicron
    [ 1.593158] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.593424] scsi1 : pata_jmicron
    [ 1.593609] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
    [ 1.593612] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 18
    [ 1.596715] firewire_ohci 0000:05:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x80
    [ 1.740079] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.740483] scsi2 : ata_piix
    [ 1.740779] scsi3 : ata_piix
    [ 1.741044] ata3: SATA max UDMA/133 cmd 0x3438 ctl 0x344c bmdma 0x3410 irq 19
    [ 1.741049] ata4: SATA max UDMA/133 cmd 0x3430 ctl 0x3448 bmdma 0x3418 irq 19
    [ 1.741248] ata_piix 0000:00:1f.5: MAP [
    [ 1.741250] P0 -- P1 -- ]
    [ 1.741284] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 1.741526] scsi4 : ata_piix
    [ 1.741784] scsi5 : ata_piix
    [ 1.742032] ata5: SATA max UDMA/133 cmd 0x3428 ctl 0x3444 bmdma 0x30f0 irq 19
    [ 1.742036] ata6: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x30f8 irq 19
    [ 1.742228] ehci-pci 0000:00:1a.7: setting latency timer to 64
    [ 1.742244] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 1.742252] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
    [ 1.742266] ehci-pci 0000:00:1a.7: debug port 1
    [ 1.746161] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.746168] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90b25400
    [ 1.753360] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.753568] hub 3-0:1.0: USB hub found
    [ 1.753573] hub 3-0:1.0: 4 ports detected
    [ 1.753841] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.753845] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.753852] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
    [ 1.753886] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 1.754034] hub 4-0:1.0: USB hub found
    [ 1.754039] hub 4-0:1.0: 2 ports detected
    [ 1.754278] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.754282] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.754288] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
    [ 1.754321] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080
    [ 1.754470] hub 5-0:1.0: USB hub found
    [ 1.754475] hub 5-0:1.0: 2 ports detected
    [ 1.754707] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.754711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.754717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.754748] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
    [ 1.754886] hub 6-0:1.0: USB hub found
    [ 1.754890] hub 6-0:1.0: 2 ports detected
    [ 1.755113] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.755117] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.755123] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.755146] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
    [ 1.755279] hub 7-0:1.0: USB hub found
    [ 1.755284] hub 7-0:1.0: 2 ports detected
    [ 1.755501] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.755505] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.755511] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.755533] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
    [ 1.755672] hub 8-0:1.0: USB hub found
    [ 1.755677] hub 8-0:1.0: 2 ports detected
    [ 1.756794] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 1.757624] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 1.757636] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
    [ 1.757651] ehci-pci 0000:00:1d.7: debug port 1
    [ 1.761541] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.761550] ehci-pci 0000:00:1d.7: irq 23, io mem 0x90b25000
    [ 1.770027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.770236] hub 9-0:1.0: USB hub found
    [ 1.770242] hub 9-0:1.0: 6 ports detected
    [ 1.793425] hub 6-0:1.0: USB hub found
    [ 1.793434] hub 6-0:1.0: 2 ports detected
    [ 1.816762] hub 7-0:1.0: USB hub found
    [ 1.816772] hub 7-0:1.0: 2 ports detected
    [ 1.840122] hub 8-0:1.0: USB hub found
    [ 1.840131] hub 8-0:1.0: 2 ports detected
    [ 1.896698] usb 1-1: new high-speed USB device number 2 using xhci_hcd
    [ 1.911468] hub 1-1:1.0: USB hub found
    [ 1.911627] hub 1-1:1.0: 4 ports detected
    [ 2.064043] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.074751] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.096814] firewire_core 0000:05:05.0: created device fw0: GUID 009027000228f4cc, S400
    [ 2.520099] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.520116] ata4.01: SATA link down (SStatus 4 SControl 300)
    [ 2.520129] ata4.01: link offline, clearing class 3 to NONE
    [ 2.526834] ata4.00: ATAPI: HL-DT-ST BDDVDRW UH12NS30, 1.00, max UDMA/100
    [ 2.540115] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.540132] ata3.01: SATA link down (SStatus 4 SControl 300)
    [ 2.540234] ata4.00: configured for UDMA/100
    [ 2.547003] ata3.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
    [ 2.547008] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.560344] ata3.00: configured for UDMA/133
    [ 2.560526] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    [ 2.562299] scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS30 1.00 PQ: 0 ANSI: 5
    [ 2.565388] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.565443] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.565446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.565469] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.569249] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.569254] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.569537] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.582466] sda: sda1 sda2
    [ 2.582770] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.763375] usb 6-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.186725] usb 7-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.373997] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.384911] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
    [ 3.384942] usbcore: registered new interface driver usbhid
    [ 3.384944] usbhid: USB HID core driver
    [ 3.389375] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input0
    [ 3.389518] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:1d.1-1:1
    [ 3.956744] usb 8-1: new low-speed USB device number 2 using uhci_hcd
    [ 4.193021] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
    [ 4.193111] hid-generic 0003:05A4:9881.0005: input,hidraw2: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:1d.2-1/input0
    [ 4.323187] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
    [ 4.323310] hid-generic 0003:05A4:9881.0006: input,hidraw3: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:1d.2-1/input1
    [ 11.876733] bio: create slab <bio-1> at 1
    [ 12.881119] bio: create slab <bio-1> at 1
    [ 13.707370] PM: Starting manual resume from disk
    [ 13.707375] PM: Hibernation image partition 254:2 present
    [ 13.707377] PM: Looking for hibernation image.
    [ 13.707685] PM: Image not found (code -22)
    [ 13.707689] PM: Hibernation image not present or could not be loaded.
    [ 14.046090] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 14.787445] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 14.788676] systemd[1]: Set hostname to <HTPC-Arch>.
    [ 15.226797] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 15.226858] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 15.226873] systemd[1]: Starting Remote File Systems.
    [ 15.227011] systemd[1]: Reached target Remote File Systems.
    [ 15.227023] systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
    [ 15.227118] systemd[1]: Starting Delayed Shutdown Socket.
    [ 15.227240] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 15.227251] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 15.227365] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 15.227375] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 15.227491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 15.227501] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 15.227623] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 15.227662] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 15.227875] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 15.227893] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 15.227935] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 15.227945] systemd[1]: Starting Paths.
    [ 15.228037] systemd[1]: Reached target Paths.
    [ 15.228050] systemd[1]: Starting Journal Socket.
    [ 15.228187] systemd[1]: Listening on Journal Socket.
    [ 15.249416] systemd[1]: Started Set Up Additional Binary Formats.
    [ 15.262084] systemd[1]: Starting Apply Kernel Variables...
    [ 15.262799] systemd[1]: Starting Create static device nodes in /dev...
    [ 15.263427] systemd[1]: Mounting Huge Pages File System...
    [ 15.263983] systemd[1]: Starting Setup Virtual Console...
    [ 15.264564] systemd[1]: Mounting POSIX Message Queue File System...
    [ 15.265156] systemd[1]: Mounting Debug File System...
    [ 15.280316] systemd[1]: Started Load Kernel Modules.
    [ 15.280348] systemd[1]: Mounting Configuration File System...
    [ 15.280921] systemd[1]: Mounted FUSE Control File System.
    [ 15.280939] systemd[1]: Starting Journal Service...
    [ 15.281676] systemd[1]: Started Journal Service.
    [ 15.281761] systemd[1]: Starting udev Kernel Socket.
    [ 15.281891] systemd[1]: Listening on udev Kernel Socket.
    [ 15.281945] systemd[1]: Starting udev Control Socket.
    [ 15.282059] systemd[1]: Listening on udev Control Socket.
    [ 15.282117] systemd[1]: Starting udev Coldplug all Devices...
    [ 15.282675] systemd[1]: Starting Encrypted Volumes.
    [ 15.282783] systemd[1]: Reached target Encrypted Volumes.
    [ 15.282802] systemd[1]: Expecting device dev-disk-by\x2duuid-0318dc88\x2d9059\x2d4a62\x2dbcff\x2d33265de192a4.device...
    [ 15.282920] systemd[1]: Started File System Check on Root Device.
    [ 15.282933] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 15.283591] systemd[1]: Mounting Temporary Directory...
    [ 15.420998] systemd[1]: Expecting device dev-disk-by\x2duuid-53882be2\x2d6e5d\x2d4f81\x2d8336\x2d8115b139229a.device...
    [ 15.422283] systemd[1]: Expecting device dev-disk-by\x2duuid-a510d99d\x2dd043\x2d415c\x2d9357\x2d87584ac75ce0.device...
    [ 15.753587] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 15.847848] systemd-udevd[185]: starting version 204
    [ 16.644359] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 16.644369] ACPI: Sleep Button [SLPB]
    [ 16.644450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 16.644454] ACPI: Power Button [PWRF]
    [ 16.751410] pps_core: LinuxPPS API ver. 1 registered
    [ 16.751415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 16.808340] media: Linux media interface: v0.10
    [ 16.812148] Linux video capture interface: v2.00
    [ 16.820027] PTP clock support registered
    [ 16.833228] ACPI: Requesting acpi_cpufreq
    [ 16.874833] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 16.874837] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 16.875034] e1000e 0000:00:19.0: setting latency timer to 64
    [ 16.875118] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 16.875143] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 16.914814] saa7164 driver loaded
    [ 16.916507] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
    [ 16.916513] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0x90000000
    [ 17.050022] saa7164_downloadfirmware() no first image
    [ 17.050682] cfg80211: Calling CRDA to update world regulatory domain
    [ 17.051569] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
    [ 17.187584] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:78:69:22
    [ 17.187590] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 17.187615] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
    [ 17.187944] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20130328/utaddress-251)
    [ 17.187951] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 17.187976] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 17.448874] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
    [ 17.481174] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 17.580464] saa7164_downloadfirmware() firmware read 4019072 bytes.
    [ 17.580469] saa7164_downloadfirmware() firmware loaded.
    [ 17.580471] Firmware file header part 1:
    [ 17.580473] .FirmwareSize = 0x0
    [ 17.580474] .BSLSize = 0x0
    [ 17.580475] .Reserved = 0x3d538
    [ 17.580477] .Version = 0x3
    [ 17.580479] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
    [ 17.580485] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
    [ 17.580486] saa7164_downloadfirmware() BSLSize = 0x0
    [ 17.580488] saa7164_downloadfirmware() Reserved = 0x0
    [ 17.580489] saa7164_downloadfirmware() Version = 0x1661c00
    [ 17.621991] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 17.694365] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
    [ 17.694422] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
    [ 17.694477] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
    [ 17.694908] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 17.694980] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
    [ 17.707929] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 17.907140] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907184] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907251] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 17.993729] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
    [ 18.040563] coretemp coretemp.0: Using relative temperature scale!
    [ 18.040576] coretemp coretemp.0: Using relative temperature scale!
    [ 18.100383] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [ 18.112063] iTCO_vendor_support: vendor-support=0
    [ 18.298748] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 18.298795] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
    [ 18.298917] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 18.520198] systemd-udevd[206]: renamed network interface wlan0 to wlp5s3
    [ 18.624855] Adding 10485756k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:10485756k FS
    [ 18.730190] systemd-udevd[200]: renamed network interface eth0 to enp0s25
    [ 20.673933] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 20.681617] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 20.855405] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 21.795385] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896764] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896898] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
    [ 22.415792] systemd-logind[284]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 22.415885] systemd-logind[284]: Watching system buttons on /dev/input/event3 (Sleep Button)
    [ 22.618057] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input9
    [ 22.619178] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input10
    [ 24.390026] saa7164_downloadimage() Image downloaded, booting...
    [ 24.493363] saa7164_downloadimage() Image booted successfully.
    [ 24.493397] starting firmware download(2)
    [ 26.916146] systemd-logind[284]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
    [ 27.103368] saa7164_downloadimage() Image downloaded, booting...
    [ 29.170040] saa7164_downloadimage() Image booted successfully.
    [ 29.170074] firmware download complete.
    [ 29.217377] tveeprom 9-0000: Hauppauge model 88061, rev C4F2, serial# 8524019
    [ 29.217381] tveeprom 9-0000: MAC address is 00:0d:fe:82:10:f3
    [ 29.217383] tveeprom 9-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
    [ 29.217386] tveeprom 9-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
    [ 29.217388] tveeprom 9-0000: audio processor is SAA7164 (idx 43)
    [ 29.217390] tveeprom 9-0000: decoder processor is SAA7164 (idx 40)
    [ 29.217392] tveeprom 9-0000: has radio, has IR receiver, has no IR transmitter
    [ 29.217394] saa7164[0]: Hauppauge eeprom: model=88061
    [ 29.865010] tda18271 10-0060: creating new instance
    [ 29.869343] TDA18271HD/C2 detected @ 10-0060
    [ 30.094538] DVB: registering new adapter (saa7164)
    [ 30.094548] saa7164 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 30.383509] tda18271 11-0060: creating new instance
    [ 30.387943] TDA18271HD/C2 detected @ 11-0060
    [ 30.457571] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 30.457682] e1000e 0000:00:19.0 enp0s25: Link Speed was downgraded by SmartSpeed
    [ 30.457685] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
    [ 30.457715] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
    [ 30.612017] tda18271: performing RF tracking filter calibration
    [ 32.898604] tda18271: RF tracking filter calibration complete
    [ 32.901771] DVB: registering new adapter (saa7164)
    [ 32.901779] saa7164 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 32.902195] saa7164[0]: registered device video0 [mpeg]
    [ 33.133183] saa7164[0]: registered device video1 [mpeg]
    [ 33.343857] saa7164[0]: registered device vbi0 [vbi]
    [ 33.343959] saa7164[0]: registered device vbi1 [vbi]
    [ 37.832133] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    [ 38.787420] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=0
    [ 39.333649] EXT4-fs (dm-3): re-mounted.

    I seemed to have solved this by following the advice in the Gentoo wiki:
    https://wiki.gentoo.org/wiki/Radeon#Audio_over_HDMI
    pcm.!default {
    type plug
    slave.pcm "hdmi"
    Those four lines in my /etc/asound.conf work. I'm not sure what the difference is between specifying "hdmi" vs the hardware device "hw:0,3".
    I still get no sound with `aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav` however, `aplay /usr/share/sounds/alsa/Front_Center.wav` works now. `aplay -D hdmi /usr/share/sounds/alsa/Front_Center.wav` results in an error/warning:
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    aplay: set_params:1239: Channels count non available

  • Setting Up multiple nvidia cards on DELL Studio XPS 1330

    I recently purchased a DELL Studio XPS 1330 with 256MB NVIDIA(R) GeForce(R) 9500M-GE card. The laptop has two video cards as shown by the following files - /dev/nvidia0, /dev/nvidia1.
    I have been trying to install arch on it but I have run into a problem with Xorg which is not working out with the automatic configuration generated. Though startx and xinit shows the default X display with pointers and xterm but with the following error in the background
    NVIDIA : could not open the device file /dev/nvidia0 (input/output error)
    (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI 2:0:0
    Strangely enough if I test my config file with X -config <path> then it gives the same error but nothing shows up on the screen.
    It seems to me that one of the cards is loading fine but the other one is not. Is there any way to set up both the graphics card with only one screen.
    Here is my xorg.conf :
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 1 "Screen0" 0 0
    Screen 0 "Screen1" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    #Section "ServerFlags"
    # Option "Xinerama" "0"
    # Option "AllowEmptyInput" "False"
    #EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    # Load "dri2"
    Load "glx"
    Load "extmod"
    Load "dbe"
    Load "record"
    Load "synaptics"
    # Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "G98 [GeForce 9200M GS]"
    BusID "PCI:2:0:0"
    EndSection
    Section "Device"
    Identifier "Card1"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "C79 [GeForce 9400M G]"
    BusID "PCI:3:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    and the dmesg output :
    Linux version 2.6.30-ARCH (root@artin) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Mon Aug 17 16:06:45 CEST 2009
    Command line: root=/dev/disk/by-uuid/98e4044b-b669-4ad9-825b-461b6cff19f6 ro
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
    BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data)
    BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
    BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
    DMI present.
    last_pfn = 0x160000 max_arch_pfn = 0x100000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-C7FFF write-protect
    C8000-DBFFF uncachable
    DC000-EFFFF write-through
    F0000-FFFFF write-back
    MTRR variable ranges enabled:
    0 base 0A0000000 mask FE0000000 uncachable
    1 base 0C0000000 mask FC0000000 uncachable
    2 base 000000000 mask F00000000 write-back
    3 base 100000000 mask FC0000000 write-back
    4 base 140000000 mask FE0000000 write-back
    5 base 09FF00000 mask FFFF00000 uncachable
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0x8fec0 max_arch_pfn = 0x100000000
    e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (usable)
    modified: 0000000000001000 - 0000000000006000 (reserved)
    modified: 0000000000006000 - 000000000009dc00 (usable)
    modified: 000000000009dc00 - 00000000000a0000 (reserved)
    modified: 00000000000e4000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000008fec0000 (usable)
    modified: 000000008fec0000 - 000000008fecf000 (ACPI data)
    modified: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
    modified: 000000008fee5000 - 00000000a0000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000fff80000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000160000000 (usable)
    init_memory_mapping: 0000000000000000-000000008fec0000
    0000000000 - 008fe00000 page 2M
    008fe00000 - 008fec0000 page 4k
    kernel direct mapping tables up to 8fec0000 @ 8000-d000
    init_memory_mapping: 0000000100000000-0000000160000000
    0100000000 - 0160000000 page 2M
    kernel direct mapping tables up to 160000000 @ b000-12000
    RAMDISK: 37f41000 - 37fefc4d
    ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD )
    ACPI: XSDT 000000008fec3ac3 000A4 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
    ACPI: DSDT 000000008fec5655 0953B (v01 NVIDIA MCP79 06040000 MSFT 03000001)
    ACPI: FACS 000000008fee4fc0 00040
    ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 000000008feced6c 00072 (v01 PTLTD APIC 06040000 LTP 00000000)
    ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
    ACPI: SSDT 000000008fec53f6 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec5350 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec52aa 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec5204 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec515e 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec50b8 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec5012 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4f6c 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec3b67 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
    ACPI: Local APIC address 0xfee00000
    (8 early reservations) ==> bootmem [0000000000 - 0160000000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
    #3 [0037f41000 - 0037fefc4d] RAMDISK ==> [0037f41000 - 0037fefc4d]
    #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
    #5 [000082e000 - 000082e16c] BRK ==> [000082e000 - 000082e16c]
    #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
    #7 [000000b000 - 000000d000] PGTABLE ==> [000000b000 - 000000d000]
    found SMP MP-table at [ffff8800000f7b50] f7b50
    [ffffe20000000000-ffffe20004dfffff] PMD -> [ffff880028200000-ffff88002cffffff] on node 0
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00160000
    Movable zone start PFN for each node
    early_node_map[4] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009d
    0: 0x00000100 -> 0x0008fec0
    0: 0x00100000 -> 0x00160000
    On node 0 totalpages: 982616
    DMA zone: 56 pages used for memmap
    DMA zone: 1687 pages reserved
    DMA zone: 2249 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 571128 pages, LIFO batch:31
    Normal zone: 5376 pages used for memmap
    Normal zone: 387840 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10dea301 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000001000 - 0000000000006000
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000
    PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000
    PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000
    PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
    PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
    Allocating PCI resources starting at a4000000 (gap: a0000000:40000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 25 pages at ffff880028028000, static data 72352 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 961217
    Kernel command line: root=/dev/disk/by-uuid/98e4044b-b669-4ad9-825b-461b6cff19f6 ro
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    NR_IRQS:768
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 2399.817 MHz processor.
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
    software IO TLB at phys 0x20000000 - 0x24000000
    Memory: 3770228k/5767168k available (3409k kernel code, 1836704k absent, 159460k reserved, 1239k data, 464k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    hpet clockevent registered
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.61 BogoMIPS (lpj=7999390)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    ACPI: Core revision 20090320
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4801.88 BogoMIPS (lpj=7999812)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 3072K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (9603.50 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 1888 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - e07fffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:03.0: reg 10 io port: [0x1c00-0x1cff]
    pci 0000:00:03.2: reg 10 io port: [0x3080-0x30bf]
    pci 0000:00:03.2: reg 20 io port: [0x3040-0x307f]
    pci 0000:00:03.2: reg 24 io port: [0x2000-0x203f]
    pci 0000:00:03.2: PME# supported from D3hot D3cold
    pci 0000:00:03.2: PME# disabled
    pci 0000:00:03.5: reg 10 32bit mmio: [0xf0600000-0xf067ffff]
    pci 0000:00:04.0: reg 10 32bit mmio: [0xf0886000-0xf0886fff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: reg 10 32bit mmio: [0xf0889000-0xf08890ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:06.0: reg 10 32bit mmio: [0xf0887000-0xf0887fff]
    pci 0000:00:06.0: supports D1 D2
    pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:06.1: reg 10 32bit mmio: [0xf0889400-0xf08894ff]
    pci 0000:00:06.1: supports D1 D2
    pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.1: PME# disabled
    pci 0000:00:08.0: reg 10 32bit mmio: [0xf0880000-0xf0883fff]
    pci 0000:00:08.0: PME# supported from D3hot D3cold
    pci 0000:00:08.0: PME# disabled
    pci 0000:00:0a.0: reg 10 32bit mmio: [0xf0888000-0xf0888fff]
    pci 0000:00:0a.0: reg 14 io port: [0x30d0-0x30d7]
    pci 0000:00:0a.0: reg 18 32bit mmio: [0xf0889c00-0xf0889cff]
    pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf0889800-0xf088980f]
    pci 0000:00:0a.0: supports D1 D2
    pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:0b.0: reg 10 io port: [0x30e8-0x30ef]
    pci 0000:00:0b.0: reg 14 io port: [0x30dc-0x30df]
    pci 0000:00:0b.0: reg 18 io port: [0x30e0-0x30e7]
    pci 0000:00:0b.0: reg 1c io port: [0x30d8-0x30db]
    pci 0000:00:0b.0: reg 20 io port: [0x30c0-0x30cf]
    pci 0000:00:0b.0: reg 24 32bit mmio: [0xf0884000-0xf0885fff]
    pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0c.0: PME# disabled
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.0: PME# disabled
    pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:16.0: PME# disabled
    pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:17.0: PME# disabled
    pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:18.0: PME# disabled
    pci 0000:01:07.0: reg 10 32bit mmio: [0xf0500000-0xf05007ff]
    pci 0000:01:07.0: supports D1 D2
    pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.0: PME# disabled
    pci 0000:01:07.1: reg 10 32bit mmio: [0xf0500800-0xf05008ff]
    pci 0000:01:07.1: supports D1 D2
    pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.1: PME# disabled
    pci 0000:01:07.2: reg 10 32bit mmio: [0xf0500c00-0xf0500cff]
    pci 0000:01:07.2: supports D1 D2
    pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.2: PME# disabled
    pci 0000:01:07.3: reg 10 32bit mmio: [0xf0501000-0xf05010ff]
    pci 0000:01:07.3: supports D1 D2
    pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.3: PME# disabled
    pci 0000:00:09.0: transparent bridge
    pci 0000:00:09.0: bridge 32bit mmio: [0xf0500000-0xf05fffff]
    pci 0000:02:00.0: reg 10 32bit mmio: [0xae000000-0xaeffffff]
    pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:02:00.0: reg 1c 64bit mmio: [0xac000000-0xadffffff]
    pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f]
    pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff]
    pci 0000:00:0c.0: bridge 32bit mmio: [0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:03:00.0: reg 10 32bit mmio: [0xaa000000-0xaaffffff]
    pci 0000:03:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff]
    pci 0000:03:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
    pci 0000:03:00.0: reg 24 io port: [0x5000-0x507f]
    pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:00:10.0: bridge io port: [0x5000-0x5fff]
    pci 0000:00:10.0: bridge 32bit mmio: [0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge 64bit mmio pref: [0xb0000000-0xcdffffff]
    pci 0000:00:15.0: bridge io port: [0x6000-0x6fff]
    pci 0000:00:15.0: bridge 32bit mmio: [0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
    pci 0000:06:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
    pci 0000:06:00.0: supports D1 D2
    pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:06:00.0: PME# disabled
    pci 0000:00:16.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
    ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
    ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:03: mem resource (0xf0600000-0xf0607fff) overlaps 0000:00:03.5 BAR 0 (0xf0600000-0xf067ffff), disabling
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
    system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
    system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
    system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
    system 00:04: ioport range 0x1000-0x107f has been reserved
    system 00:04: ioport range 0x1080-0x10ff has been reserved
    system 00:04: ioport range 0x1400-0x147f has been reserved
    system 00:04: ioport range 0x1480-0x14ff has been reserved
    system 00:04: ioport range 0x1800-0x187f has been reserved
    system 00:04: ioport range 0x1880-0x18ff has been reserved
    system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    system 00:07: ioport range 0x910-0x911 has been reserved
    system 00:07: ioport range 0x295-0x296 has been reserved
    pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:09.0: IO window: disabled
    pci 0000:00:09.0: MEM window: 0xf0500000-0xf05fffff
    pci 0000:00:09.0: PREFETCH window: disabled
    pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
    pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:0c.0: IO window: 0x4000-0x4fff
    pci 0000:00:0c.0: MEM window: 0xac000000-0xaeffffff
    pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:10.0: IO window: 0x5000-0x5fff
    pci 0000:00:10.0: MEM window: 0xaa000000-0xaaffffff
    pci 0000:00:10.0: PREFETCH window: 0x000000b0000000-0x000000cdffffff
    pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
    pci 0000:00:15.0: IO window: 0x6000-0x6fff
    pci 0000:00:15.0: MEM window: 0xf0200000-0xf03fffff
    pci 0000:00:15.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff
    pci 0000:00:16.0: PCI bridge, secondary bus 0000:06
    pci 0000:00:16.0: IO window: disabled
    pci 0000:00:16.0: MEM window: 0xf0400000-0xf04fffff
    pci 0000:00:16.0: PREFETCH window: disabled
    pci 0000:00:17.0: PCI bridge, secondary bus 0000:07
    pci 0000:00:17.0: IO window: disabled
    pci 0000:00:17.0: MEM window: disabled
    pci 0000:00:17.0: PREFETCH window: disabled
    pci 0000:00:18.0: PCI bridge, secondary bus 0000:08
    pci 0000:00:18.0: IO window: disabled
    pci 0000:00:18.0: MEM window: disabled
    pci 0000:00:18.0: PREFETCH window: disabled
    pci 0000:00:09.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
    pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:0c.0: setting latency timer to 64
    pci 0000:00:10.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
    pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
    pci 0000:00:15.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
    pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:16.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
    pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:17.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
    pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:18.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 1 mem: [0xf0500000-0xf05fffff]
    pci_bus 0000:01: resource 3 io: [0x00-0xffff]
    pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:02: resource 1 mem: [0xac000000-0xaeffffff]
    pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:03: resource 1 mem: [0xaa000000-0xaaffffff]
    pci_bus 0000:03: resource 2 pref mem [0xb0000000-0xcdffffff]
    pci_bus 0000:04: resource 0 io: [0x6000-0x6fff]
    pci_bus 0000:04: resource 1 mem: [0xf0200000-0xf03fffff]
    pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf01fffff]
    pci_bus 0000:06: resource 1 mem: [0xf0400000-0xf04fffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 699k freed
    Simple Boot Flag at 0x36 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1251883664.380:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7366
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:03:00.0: Boot video device
    pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:0c.0: setting latency timer to 64
    pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:15.0: setting latency timer to 64
    pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:16.0: setting latency timer to 64
    pcieport-driver 0000:00:17.0: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:17.0: setting latency timer to 64
    pcieport-driver 0000:00:18.0: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:18.0: setting latency timer to 64
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 464k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    libata version 3.00 loaded.
    ahci 0000:00:0b.0: version 3.0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
    ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
    ahci 0000:00:0b.0: irq 29 for MSI/MSI-X
    ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
    ahci 0000:00:0b.0: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 29
    ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 29
    ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 29
    ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 29
    ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 29
    ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 29
    ata3: SATA link down (SStatus 0 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-8: WDC WD5000BEVT-75ZAT0, 01.01A01, max UDMA/133
    ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-7 01.0 PQ: 0 ANSI: 5
    ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A109, max UDMA/133
    ata2.00: configured for UDMA/133
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A109 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs: barriers enabled
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda3 with ordered data mode
    kjournald2 starting: pid 625, dev sda3:8, commit interval 5 seconds
    rtc_cmos 00:0a: RTC can wake from S4
    rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 145
    ACPI: SSDT 000000008fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 000000008fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    input: PC Speaker as /devices/platform/pcspkr/input/input2
    Clocksource tsc unstable (delta = -101947060 ns)
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
    forcedeth 0000:00:0a.0: setting latency timer to 64
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:eb:14:f2
    forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
    ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889000
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21
    ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:06.1: setting latency timer to 64
    ehci_hcd 0000:00:06.1: EHCI Host Controller
    ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:06.1: debug port 1
    ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
    ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400
    ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    wl 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    wl 0000:06:00.0: setting latency timer to 64
    eth1 (wl): not using net_device_ops yet
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input5
    ACPI: Sleep Button [SLPB]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    ACPI: Lid Switch [LID]
    ACPI: WMI: Mapper loaded
    ACPI: AC Adapter [ADP0] (on-line)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (64 C)
    nvidia 0000:02:00.0: enabling device (0004 -> 0007)
    nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:02:00.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 20
    nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 20 (level, low) -> IRQ 20
    nvidia 0000:03:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009
    lib80211_crypt: registered algorithm 'TKIP'
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
    i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
    eth1: Broadcom BCM432b 802.11 Wireless Controller 5.10.91.9
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 19
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:04.0: irq 19, io mem 0xf0886000
    ACPI: Battery Slot [BAT0] (battery present)
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 18
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    ohci_hcd 0000:00:06.0: OHCI Host Controller
    ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:06.0: irq 18, io mem 0xf0887000
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
    ohci1394 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4]
    usb 2-3: new high speed USB device using ehci_hcd and address 2
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
    HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:00:08.0: setting latency timer to 64
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/device:12/input/input7
    ACPI: Video Device [Z01I] (multi-head: no rom: yes post: no)
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
    sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
    sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
    usb 2-3: configuration #1 chosen from 1 choice
    Linux video capture interface: v2.00
    usb 3-4: new full speed USB device using ohci_hcd and address 2
    uvcvideo: Found UVC 1.00 device Integrated_Webcam_1.3M (0c45:63fc)
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
    usb 3-4: configuration #1 chosen from 1 choice
    hub 3-4:1.0: USB hub found
    hub 3-4:1.0: 3 ports detected
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    usb 3-4.1: new full speed USB device using ohci_hcd and address 3
    usb 3-4.1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
    usb 3-4.2: new full speed USB device using ohci_hcd and address 4
    input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input9
    generic-usb 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    usb 3-4.2: configuration #1 chosen from 1 choice
    input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input10
    generic-usb 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[354fc000352c8d58]
    input: Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input11
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    usb 3-4.3: new full speed USB device using ohci_hcd and address 5
    hda_intel: Codec #1 probe error; disabling it...
    usb 3-4.3: configuration #1 chosen from 1 choice
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: Generic Bluetooth USB driver ver 0.5
    usbcore: registered new interface driver btusb
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input12
    input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input13
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input14
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/input/input15
    EXT4 FS on sda3, internal journal on sda3:8
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 3169, dev sda4:8, commit interval 5 seconds
    EXT4 FS on sda4, internal journal on sda4:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem sda4 with ordered data mode
    Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
    Bluetooth: L2CAP ver 2.13
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bridge firewalling registered
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    input: Logitech Bluetooth Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.3/3-4.3:1.0/bluetooth/hci0/hci0:12/input16
    generic-bluetooth 0005:046D:B006.0003: input,hidraw1: BLUETOOTH HID v1.24 Mouse [Logitech Bluetooth Mouse] on 00:25:56:DC:1A:A4
    NVRM: RmInitAdapter failed! (0x31:0xffffffff:1026)
    NVRM: rm_init_adapter(0) failed
    NVRM: RmInitAdapter failed! (0x31:0xffffffff:1026)
    NVRM: rm_init_adapter(0) failed
    Thanks.

    hey, I just realised, that you have the same problem as me, though mine is a studio xps1340 with a 9500M.
    Did you make any progress in configuring your xorg.conf or anything else? Please say yes...

  • X11 won't start (sets monitor to standby) with nVidia card

    Hello everyone!
    I'm having some trouble getting my computer to work properly. Yesterday it was working perfectly, but today it would't start again. After some troubleshooting I've determined that the problem lies with X11 and the graphics driver. The bootloader, grub, and arch itself, boots perfectly in runlevel 3, but the moment you run "startx" it would appear to be loading for a while and finally the screen goes to standby mode and there is no way out of that other than reseting the computer using the reset button. I've tried uninstalling the nvidia drivers and installing nouveau drivers, but it still won't start X, this time arround, it would just hang up with a white screen.
    I've also tried removing xorg.conf and also using nvidia utility to generate a new one, but neither seems to work.
    /var/log/Xorg.0.log doesn't report any errors, it just gives different info from the configuration and the graphics card and just ends there.
    I've tried booting with a debian live USB but it would't boot either (the computer would just restart). I've also tried a Kubuntu live USB, this time arround, it would start to boot but the graphics appeared to be corrupted (strange colored noise all over the screen) and eventually it would just hang up. Using nomodeset Kubuntu finally booted (using vesa I guess?), but the same didn't work in Arch (I'm guessing because I have the nvidia drivers installed instead of nouveau).
    In conclussion, something appears to be wrong with the graphics card, I dont't know if it's a software problem or a hardware problem, as it started from one day to the other, without any upgrades in between, and it just doesn't work in any of the 3 distributions I've tested.
    Any suggestions in what to do to troubleshoot this?
    Thanks in advance,
    Santiago.-

    Xorg.0.log
    [ 35.560]
    X.Org X Server 1.14.4
    Release Date: 2013-10-31
    [ 35.560] X Protocol Version 11, Revision 0
    [ 35.560] Build Operating System: Linux 3.11.6-1-ARCH x86_64
    [ 35.561] Current Operating System: Linux arch 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
    [ 35.561] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    [ 35.562] Build Date: 01 November 2013 05:10:48PM
    [ 35.562]
    [ 35.562] Current version of pixman: 0.30.2
    [ 35.562] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 35.562] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 35.564] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 4 21:35:07 2013
    [ 35.576] (==) Using config file: "/etc/X11/xorg.conf"
    [ 35.576] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 35.577] (==) ServerLayout "Layout0"
    [ 35.577] (**) |-->Screen "Screen0" (0)
    [ 35.577] (**) | |-->Monitor "Monitor0"
    [ 35.577] (**) | |-->Device "Device0"
    [ 35.577] (**) |-->Input Device "Keyboard0"
    [ 35.577] (**) |-->Input Device "Mouse0"
    [ 35.577] (==) Automatically adding devices
    [ 35.577] (==) Automatically enabling devices
    [ 35.577] (==) Automatically adding GPU devices
    [ 35.603] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 35.603] Entry deleted from font path.
    [ 35.603] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 35.603] Entry deleted from font path.
    [ 35.603] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 35.603] Entry deleted from font path.
    [ 35.603] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 35.604] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 35.604] Entry deleted from font path.
    [ 35.604] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 35.604] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 35.604] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 35.604] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 35.604] (WW) Disabling Keyboard0
    [ 35.604] (WW) Disabling Mouse0
    [ 35.604] (II) Loader magic: 0x7fdc20
    [ 35.604] (II) Module ABI versions:
    [ 35.604] X.Org ANSI C Emulation: 0.4
    [ 35.604] X.Org Video Driver: 14.1
    [ 35.604] X.Org XInput driver : 19.1
    [ 35.604] X.Org Server Extension : 7.0
    [ 35.604] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 35.605] (--) PCI:*(0:1:0:0) 10de:0421:1682:2353 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
    [ 35.606] Initializing built-in extension Generic Event Extension
    [ 35.606] Initializing built-in extension SHAPE
    [ 35.606] Initializing built-in extension MIT-SHM
    [ 35.606] Initializing built-in extension XInputExtension
    [ 35.606] Initializing built-in extension XTEST
    [ 35.607] Initializing built-in extension BIG-REQUESTS
    [ 35.607] Initializing built-in extension SYNC
    [ 35.607] Initializing built-in extension XKEYBOARD
    [ 35.607] Initializing built-in extension XC-MISC
    [ 35.608] Initializing built-in extension SECURITY
    [ 35.608] Initializing built-in extension XINERAMA
    [ 35.608] Initializing built-in extension XFIXES
    [ 35.608] Initializing built-in extension RENDER
    [ 35.608] Initializing built-in extension RANDR
    [ 35.609] Initializing built-in extension COMPOSITE
    [ 35.609] Initializing built-in extension DAMAGE
    [ 35.609] Initializing built-in extension MIT-SCREEN-SAVER
    [ 35.609] Initializing built-in extension DOUBLE-BUFFER
    [ 35.619] Initializing built-in extension RECORD
    [ 35.629] Initializing built-in extension DPMS
    [ 35.638] Initializing built-in extension X-Resource
    [ 35.647] Initializing built-in extension XVideo
    [ 35.656] Initializing built-in extension XVideo-MotionCompensation
    [ 35.665] Initializing built-in extension XFree86-VidModeExtension
    [ 35.673] Initializing built-in extension XFree86-DGA
    [ 35.682] Initializing built-in extension XFree86-DRI
    [ 35.690] Initializing built-in extension DRI2
    [ 35.690] (II) LoadModule: "glx"
    [ 35.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 36.111] (II) Module glx: vendor="NVIDIA Corporation"
    [ 36.111] compiled for 4.0.2, module version = 1.0.0
    [ 36.111] Module class: X.Org Server Extension
    [ 36.111] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
    [ 36.126] Loading extension GLX
    [ 36.126] (II) LoadModule: "nvidia"
    [ 36.136] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 36.195] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 36.195] compiled for 4.0.2, module version = 1.0.0
    [ 36.195] Module class: X.Org Video Driver
    [ 36.197] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
    [ 36.197] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 36.197] (--) using VT number 2
    [ 36.248] (II) Loading sub module "fb"
    [ 36.248] (II) LoadModule: "fb"
    [ 36.259] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 36.270] (II) Module fb: vendor="X.Org Foundation"
    [ 36.270] compiled for 1.14.4, module version = 1.0.0
    [ 36.270] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.270] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 36.270] (II) Loading sub module "wfb"
    [ 36.270] (II) LoadModule: "wfb"
    [ 36.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 36.271] (II) Module wfb: vendor="X.Org Foundation"
    [ 36.271] compiled for 1.14.4, module version = 1.0.0
    [ 36.271] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.271] (II) Loading sub module "shadow"
    [ 36.271] (II) LoadModule: "shadow"
    [ 36.271] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 36.272] (II) Module shadow: vendor="X.Org Foundation"
    [ 36.272] compiled for 1.14.4, module version = 1.1.0
    [ 36.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.272] (II) Loading sub module "ramdac"
    [ 36.272] (II) LoadModule: "ramdac"
    [ 36.272] (II) Module "ramdac" already built-in
    [ 36.274] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 36.274] (==) NVIDIA(0): RGB weight 888
    [ 36.274] (==) NVIDIA(0): Default visual is TrueColor
    [ 36.274] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 36.274] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 36.274] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 36.274] (**) NVIDIA(0): Enabling 2D acceleration
    [ 50.151] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 50.256] (II) NVIDIA(GPU-0): Display (Samsung SMB2330H (CRT-0)) does not support NVIDIA 3D
    [ 50.256] (II) NVIDIA(GPU-0): Vision stereo.
    [ 50.256] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
    [ 50.256] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 50.256] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.85
    [ 50.256] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    journalctl -xb
    -- Logs begin at Sat 2013-08-17 21:55:41 ART, end at Mon 2013-11-04 22:01:35 ART. --
    Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 364.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
    Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 368.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuset
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpu
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuacct
    Nov 04 21:59:09 arch kernel: Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
    Nov 04 21:59:09 arch kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    Nov 04 21:59:09 arch kernel: e820: BIOS-provided physical RAM map:
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007fbb4fff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbb5000-0x000000007fbf7fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbf8000-0x000000007fd4bfff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd4c000-0x000000007fd51fff] ACPI data
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd52000-0x000000007fd52fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd53000-0x000000007fd54fff] ACPI data
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd55000-0x000000007fd56fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd57000-0x000000007fd57fff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd58000-0x000000007fd5bfff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd5c000-0x000000007fd6afff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd6b000-0x000000007fefffff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffbfffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    Nov 04 21:59:09 arch kernel: NX (Execute Disable) protection: active
    Nov 04 21:59:09 arch kernel: SMBIOS 2.4 present.
    Nov 04 21:59:09 arch kernel: DMI: /DG31PR, BIOS PRG3110H.86A.0071.2010.0318.1704 03/18/2010
    Nov 04 21:59:09 arch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Nov 04 21:59:09 arch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Nov 04 21:59:09 arch kernel: No AGP bridge found
    Nov 04 21:59:09 arch kernel: e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    Nov 04 21:59:09 arch kernel: MTRR default type: uncachable
    Nov 04 21:59:09 arch kernel: MTRR fixed ranges enabled:
    Nov 04 21:59:09 arch kernel: 00000-9FFFF write-back
    Nov 04 21:59:09 arch kernel: A0000-E7FFF uncachable
    Nov 04 21:59:09 arch kernel: E8000-FFFFF write-protect
    Nov 04 21:59:09 arch kernel: MTRR variable ranges enabled:
    Nov 04 21:59:09 arch kernel: 0 base 000000000 mask F80000000 write-back
    Nov 04 21:59:09 arch kernel: 1 base 07FF00000 mask FFFF00000 uncachable
    Nov 04 21:59:09 arch kernel: 2 disabled
    Nov 04 21:59:09 arch kernel: 3 disabled
    Nov 04 21:59:09 arch kernel: 4 disabled
    Nov 04 21:59:09 arch kernel: 5 disabled
    Nov 04 21:59:09 arch kernel: 6 disabled
    Nov 04 21:59:09 arch kernel: 7 disabled
    Nov 04 21:59:09 arch kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Nov 04 21:59:09 arch kernel: found SMP MP-table at [mem 0x000fc620-0x000fc62f] mapped at [ffff8800000fc620]
    Nov 04 21:59:09 arch kernel: Scanning 1 areas for low memory corruption
    Nov 04 21:59:09 arch kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x00000000-0x000fffff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    Nov 04 21:59:09 arch kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
    Nov 04 21:59:09 arch kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7f800000-0x7f9fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7f800000-0x7f9fffff] page 2M
    Nov 04 21:59:09 arch kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7c000000-0x7f7fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7c000000-0x7f7fffff] page 2M
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
    Nov 04 21:59:09 arch kernel: [mem 0x00100000-0x001fffff] page 4k
    Nov 04 21:59:09 arch kernel: [mem 0x00200000-0x7bffffff] page 2M
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fa00000-0x7fbb4fff]
    Nov 04 21:59:09 arch kernel: [mem 0x7fa00000-0x7fbb4fff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fd6b000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7fd6b000-0x7fefffff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b34000, 0x01b34fff] PGTABLE
    Nov 04 21:59:09 arch kernel: RAMDISK: [mem 0x37a14000-0x37d01fff]
    Nov 04 21:59:09 arch kernel: ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL)
    Nov 04 21:59:09 arch kernel: ACPI: XSDT 000000007fd53f10 00044 (v01 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI: FACP 000000007fd51d90 000F4 (v04 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
    Nov 04 21:59:09 arch kernel: ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0x7FD56F40/0x000000007FD52F40, using 32 (20130517/tbfadt-522)
    Nov 04 21:59:09 arch kernel: ACPI: DSDT 000000007fd4c010 04BE9 (v01 INTEL DG31PR 00000000 INTL 20051117)
    Nov 04 21:59:09 arch kernel: ACPI: FACS 000000007fd56f40 00040
    Nov 04 21:59:09 arch kernel: ACPI: APIC 000000007fd51f10 0006C (v02 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI: HPET 000000007fd5ad10 00038 (v01 INTEL ICH7HPET 06222004 AMI. 00000001)
    Nov 04 21:59:09 arch kernel: ACPI: MCFG 000000007fd5ac10 0003C (v01 INTEL DG31PR 06222004 MSFT 00000097)
    Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
    Nov 04 21:59:09 arch kernel: No NUMA configuration found
    Nov 04 21:59:09 arch kernel: Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    Nov 04 21:59:09 arch kernel: Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: NODE_DATA [mem 0x7fefb000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0
    Nov 04 21:59:09 arch kernel: Zone ranges:
    Nov 04 21:59:09 arch kernel: DMA [mem 0x00001000-0x00ffffff]
    Nov 04 21:59:09 arch kernel: DMA32 [mem 0x01000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: Normal empty
    Nov 04 21:59:09 arch kernel: Movable zone start for each node
    Nov 04 21:59:09 arch kernel: Early memory node ranges
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x00001000-0x0009efff]
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x00100000-0x7fbb4fff]
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x7fd6b000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: On node 0 totalpages: 523496
    Nov 04 21:59:09 arch kernel: DMA zone: 64 pages used for memmap
    Nov 04 21:59:09 arch kernel: DMA zone: 21 pages reserved
    Nov 04 21:59:09 arch kernel: DMA zone: 3998 pages, LIFO batch:0
    Nov 04 21:59:09 arch kernel: DMA32 zone: 8124 pages used for memmap
    Nov 04 21:59:09 arch kernel: DMA32 zone: 519498 pages, LIFO batch:31
    Nov 04 21:59:09 arch kernel: ACPI: PM-Timer IO Port: 0x408
    Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    Nov 04 21:59:09 arch kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Nov 04 21:59:09 arch kernel: ACPI: IRQ0 used by override.
    Nov 04 21:59:09 arch kernel: ACPI: IRQ2 used by override.
    Nov 04 21:59:09 arch kernel: ACPI: IRQ9 used by override.
    Nov 04 21:59:09 arch kernel: Using ACPI (MADT) for SMP configuration information
    Nov 04 21:59:09 arch kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Nov 04 21:59:09 arch kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    Nov 04 21:59:09 arch kernel: nr_irqs_gsi: 40
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbb5000-0x7fbf7fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbf8000-0x7fd4bfff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd4c000-0x7fd51fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd52000-0x7fd52fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd53000-0x7fd54fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd55000-0x7fd56fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd57000-0x7fd57fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd58000-0x7fd5bfff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd5c000-0x7fd6afff]
    Nov 04 21:59:09 arch kernel: e820: [mem 0x7ff00000-0xfed1bfff] available for PCI devices
    Nov 04 21:59:09 arch kernel: Booting paravirtualized kernel on bare hardware
    Nov 04 21:59:09 arch kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    Nov 04 21:59:09 arch kernel: PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86528 r8192 d24064 u524288
    Nov 04 21:59:09 arch kernel: pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
    Nov 04 21:59:09 arch kernel: pcpu-alloc: [0] 0 1 2 3
    Nov 04 21:59:09 arch kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 515287
    Nov 04 21:59:09 arch kernel: Policy zone: DMA32
    Nov 04 21:59:09 arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    Nov 04 21:59:09 arch kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: Checking aperture...
    Nov 04 21:59:09 arch kernel: No AGP bridge found
    Nov 04 21:59:09 arch kernel: Calgary: detecting Calgary via BIOS EBDA area
    Nov 04 21:59:09 arch kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Nov 04 21:59:09 arch kernel: Memory: 2045916K/2093984K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 48068K reserved)
    Nov 04 21:59:09 arch kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Nov 04 21:59:09 arch kernel: Preemptible hierarchical RCU implementation.
    Nov 04 21:59:09 arch kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Nov 04 21:59:09 arch kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Nov 04 21:59:09 arch kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    Nov 04 21:59:09 arch kernel: NR_IRQS:8448 nr_irqs:712 16
    Nov 04 21:59:09 arch kernel: Console: colour dummy device 80x25
    Nov 04 21:59:09 arch kernel: console [tty0] enabled
    Nov 04 21:59:09 arch kernel: allocated 8388608 bytes of page_cgroup
    Nov 04 21:59:09 arch kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Nov 04 21:59:09 arch kernel: hpet clockevent registered
    Nov 04 21:59:09 arch kernel: tsc: Fast TSC calibration using PIT
    Nov 04 21:59:09 arch kernel: tsc: Detected 2399.803 MHz processor
    Nov 04 21:59:09 arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.58 BogoMIPS (lpj=7999343)
    Nov 04 21:59:09 arch kernel: pid_max: default: 32768 minimum: 301
    Nov 04 21:59:09 arch kernel: Security Framework initialized
    Nov 04 21:59:09 arch kernel: AppArmor: AppArmor disabled by boot time parameter
    Nov 04 21:59:09 arch kernel: Yama: becoming mindful.
    Nov 04 21:59:09 arch kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Nov 04 21:59:09 arch kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Nov 04 21:59:09 arch kernel: Mount-cache hash table entries: 256
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys memory
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys devices
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys freezer
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys net_cls
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys blkio
    Nov 04 21:59:09 arch kernel: CPU: Physical Processor ID: 0
    Nov 04 21:59:09 arch kernel: CPU: Processor Core ID: 0
    Nov 04 21:59:09 arch kernel: mce: CPU supports 6 MCE banks
    Nov 04 21:59:09 arch kernel: CPU0: Thermal monitoring enabled (TM2)
    Nov 04 21:59:09 arch kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    Nov 04 21:59:09 arch kernel: Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
    Nov 04 21:59:09 arch kernel: ACPI: Core revision 20130517
    Nov 04 21:59:09 arch kernel: ACPI: All ACPI Tables successfully acquired
    Nov 04 21:59:09 arch kernel: ftrace: allocating 20100 entries in 79 pages
    Nov 04 21:59:09 arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Nov 04 21:59:09 arch kernel: smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
    Nov 04 21:59:09 arch kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    Nov 04 21:59:09 arch kernel: perf_event_intel: PEBS disabled due to CPU errata
    Nov 04 21:59:09 arch kernel: ... version: 2
    Nov 04 21:59:09 arch kernel: ... bit width: 40
    Nov 04 21:59:09 arch kernel: ... generic registers: 2
    Nov 04 21:59:09 arch kernel: ... value mask: 000000ffffffffff
    Nov 04 21:59:09 arch kernel: ... max period: 000000007fffffff
    Nov 04 21:59:09 arch kernel: ... fixed-purpose events: 3
    Nov 04 21:59:09 arch kernel: ... event mask: 0000000700000003
    Nov 04 21:59:09 arch kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Nov 04 21:59:09 arch kernel: smpboot: Booting Node 0, Processors #1 #2 #3 OK
    Nov 04 21:59:09 arch kernel: Brought up 4 CPUs
    Nov 04 21:59:09 arch kernel: smpboot: Total of 4 processors activated (19206.35 BogoMIPS)
    Nov 04 21:59:09 arch kernel: devtmpfs: initialized
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fbb5000-0x7fbf7fff] (274432 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd52000-0x7fd52fff] (4096 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd55000-0x7fd56fff] (8192 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd58000-0x7fd5bfff] (16384 bytes)
    Nov 04 21:59:09 arch kernel: RTC time: 0:59:05, date: 11/05/13
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 16
    Nov 04 21:59:09 arch kernel: ACPI: bus type PCI registered
    Nov 04 21:59:09 arch kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
    Nov 04 21:59:09 arch kernel: PCI: not using MMCONFIG
    Nov 04 21:59:09 arch kernel: PCI: Using configuration type 1 for base access
    Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
    Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Nov 04 21:59:09 arch kernel: mtrr: probably your BIOS does not setup all CPUs.
    Nov 04 21:59:09 arch kernel: mtrr: corrected configuration.
    Nov 04 21:59:09 arch kernel: bio: create slab <bio-0> at 0
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Module Device)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Device)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Nov 04 21:59:09 arch kernel: ACPI: EC: Look up EC in DSDT
    Nov 04 21:59:09 arch kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Nov 04 21:59:09 arch kernel: ACPI: SSDT 000000007fd56c10 002CC (v01 AMI IST 00000001 MSFT 03000001)
    Nov 04 21:59:09 arch kernel: ACPI: Dynamic OEM Table Load:
    Nov 04 21:59:09 arch kernel: ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001)
    Nov 04 21:59:09 arch kernel: ACPI: Interpreter enabled
    Nov 04 21:59:09 arch kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    Nov 04 21:59:09 arch kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Nov 04 21:59:09 arch kernel: ACPI: Using IOAPIC for interrupt routing
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe40fffff] reserved in ACPI motherboard resources
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) (size reduced!)
    Nov 04 21:59:09 arch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Nov 04 21:59:09 arch kernel: ACPI: No dock devices found.
    Nov 04 21:59:09 arch kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Nov 04 21:59:09 arch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
    Nov 04 21:59:09 arch kernel: PCI host bridge to bus 0000:00
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfb204000-0xfb2043ff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 00ff)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x10: [io 0xf130-0xf137]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x14: [io 0xf120-0xf123]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x18: [io 0xf110-0xf117]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x1c: [io 0xf100-0xf103]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x18: [mem 0xfb120000-0xfb120fff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x30: [mem 0xfb100000-0xfb11ffff pref]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: supports D1 D2
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
    Nov 04 21:59:09 arch kernel: ACPI: \_SB_.PCI0: notify handler is installed
    Nov 04 21:59:09 arch kernel: Found 1 acpi root devices
    Nov 04 21:59:09 arch kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Nov 04 21:59:09 arch kernel: vgaarb: loaded
    Nov 04 21:59:09 arch kernel: vgaarb: bridge control possible 0000:01:00.0
    Nov 04 21:59:09 arch kernel: PCI: Using ACPI for IRQ routing
    Nov 04 21:59:09 arch kernel: PCI: pci_cache_line_size set to 64 bytes
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7fbb5000-0x7fffffff]
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    Nov 04 21:59:09 arch kernel: NetLabel: Initializing
    Nov 04 21:59:09 arch kernel: NetLabel: domain hash size = 128
    Nov 04 21:59:09 arch kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Nov 04 21:59:09 arch kernel: NetLabel: unlabeled traffic allowed by default
    Nov 04 21:59:09 arch kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Nov 04 21:59:09 arch kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Nov 04 21:59:09 arch kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Nov 04 21:59:09 arch kernel: Switched to clocksource hpet
    Nov 04 21:59:09 arch kernel: pnp: PnP ACPI init
    Nov 04 21:59:09 arch kernel: ACPI: bus type PNP registered
    Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0400-0x047f] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x1180-0x119f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0500-0x053f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffb00000-0xffcfffff] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfc800000-0xfc800fff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed20000-0xfed7ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    Nov 04 21:59:09 arch kernel: system 00:02: [io 0x0290-0x029f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:04: [dma 2]
    Nov 04 21:59:09 arch kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:05: [dma 0 disabled]
    Nov 04 21:59:09 arch kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:06: [dma 4]
    Nov 04 21:59:09 arch kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
    Nov 04 21:59:09 arch kernel: system 00:09: [io 0x04d0-0x04d1] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
    Nov 04 21:59:09 arch kernel: pnp: PnP ACPI: found 12 devices
    Nov 04 21:59:09 arch kernel: ACPI: bus type PNP unregistered
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 7 [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 2
    Nov 04 21:59:09 arch kernel: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    Nov 04 21:59:09 arch kernel: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    Nov 04 21:59:09 arch kernel: TCP: Hash tables configured (established 16384 bind 16384)
    Nov 04 21:59:09 arch kernel: TCP: reno registered
    Nov 04 21:59:09 arch kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 1
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Boot video device
    Nov 04 21:59:09 arch kernel: PCI: CLS 64 bytes, default 64
    Nov 04 21:59:09 arch kernel: Unpacking initramfs...
    Nov 04 21:59:09 arch kernel: Freeing initrd memory: 3000K (ffff880037a14000 - ffff880037d02000)
    Nov 04 21:59:09 arch kernel: Scanning for low memory corruption every 60 seconds
    Nov 04 21:59:09 arch kernel: audit: initializing netlink socket (disabled)
    Nov 04 21:59:09 arch kernel: type=2000 audit(1383613146.559:1): initialized
    Nov 04 21:59:09 arch kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Nov 04 21:59:09 arch kernel: zbud: loaded
    Nov 04 21:59:09 arch kernel: VFS: Disk quotas dquot_6.5.2
    Nov 04 21:59:09 arch kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Nov 04 21:59:09 arch kernel: msgmni has been set to 4001
    Nov 04 21:59:09 arch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Nov 04 21:59:09 arch kernel: io scheduler noop registered
    Nov 04 21:59:09 arch kernel: io scheduler deadline registered
    Nov 04 21:59:09 arch kernel: io scheduler cfq registered (default)
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 8086 ss_did 27d2
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
    Nov 04 21:59:09 arch kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Nov 04 21:59:09 arch kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
    Nov 04 21:59:09 arch kernel: vesafb: scrolling: redraw
    Nov 04 21:59:09 arch kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Nov 04 21:59:09 arch kernel: vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90002400000, using 1216k, total 1216k
    Nov 04 21:59:09 arch kernel: Console: switching to colour frame buffer device 80x30
    Nov 04 21:59:09 arch kernel: fb0: VESA VGA frame buffer device
    Nov 04 21:59:09 arch kernel: intel_idle: does not run on family 6 model 15
    Nov 04 21:59:09 arch kernel: GHES: HEST is not enabled!
    Nov 04 21:59:09 arch kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Nov 04 21:59:09 arch kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Nov 04 21:59:09 arch kernel: Linux agpgart interface v0.103
    Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
    Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
    Nov 04 21:59:09 arch kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Nov 04 21:59:09 arch kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Nov 04 21:59:09 arch kernel: mousedev: PS/2 mouse device common for all mice
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: RTC can wake from S4
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    Nov 04 21:59:09 arch kernel: cpuidle: using governor ladder
    Nov 04 21:59:09 arch kernel: cpuidle: using governor menu
    Nov 04 21:59:09 arch kernel: drop_monitor: Initializing network drop monitor service
    Nov 04 21:59:09 arch kernel: TCP: cubic registered
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 10
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 17
    Nov 04 21:59:09 arch kernel: Key type dns_resolver registered
    Nov 04 21:59:09 arch kernel: PM: Hibernation image not present or could not be loaded.
    Nov 04 21:59:09 arch kernel: registered taskstats version 1
    Nov 04 21:59:09 arch kernel: Magic number: 5:843:960
    Nov 04 21:59:09 arch kernel: memory memory11: hash matches
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: setting system clock to 2013-11-05 00:59:07 UTC (1383613147)
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
    Nov 04 21:59:09 arch kernel: Write protecting the kernel read-only data: 8192k
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
    Nov 04 21:59:09 arch systemd-udevd[58]: starting version 208
    Nov 04 21:59:09 arch kernel: Floppy drive(s): fd0 is 1.44M
    Nov 04 21:59:09 arch kernel: SCSI subsystem initialized
    Nov 04 21:59:09 arch kernel: ACPI: bus type USB registered
    Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver usbfs
    Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver hub
    Nov 04 21:59:09 arch kernel: usbcore: registered new device driver usb
    Nov 04 21:59:09 arch kernel: ACPI: bus type ATA registered
    Nov 04 21:59:09 arch kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Nov 04 21:59:09 arch kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Nov 04 21:59:09 arch kernel: libata version 3.00 loaded.
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
    Nov 04 21:59:09 arch kernel: ehci-pci: EHCI PCI platform driver
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
    Nov 04 21:59:09 arch kernel: FDC 0 is a post-1991 82077
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: version 2.13
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: scsi0 : ata_piix
    Nov 04 21:59:09 arch kernel: scsi1 : ata_piix
    Nov 04 21:59:09 arch kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
    Nov 04 21:59:09 arch kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: MAP [
    Nov 04 21:59:09 arch kernel: P0 P2 P1 P3 ]
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: ata2: port disabled--ignoring
    Nov 04 21:59:09 arch kernel: scsi2 : ata_piix
    Nov 04 21:59:09 arch kernel: scsi3 : ata_piix
    Nov 04 21:59:09 arch kernel: ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
    Nov 04 21:59:09 arch kernel: ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: debug port 1
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb204000
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Nov 04 21:59:09 arch kernel: hub 5-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 5-0:1.0: 8 ports detected
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: ata4.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
    Nov 04 21:59:09 arch kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Nov 04 21:59:09 arch kernel: ata4.00: configured for UDMA/133
    Nov 04 21:59:09 arch kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 4096-byte physical blocks
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write Protect is off
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Nov 04 21:59:09 arch kernel: sda: sda1 sda2 sda3 sda4 sda5
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Attached SCSI disk
    Nov 04 21:59:09 arch kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
    Nov 04 21:59:09 arch kernel: tsc: Refined TSC clocksource calibration: 2399.950 MHz
    Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Nov 04 21:59:09 arch systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Nov 04 21:59:09 arch systemd[1]: Set hostname to <arch>.
    Nov 04 21:59:09 arch kernel: Switched to clocksource tsc
    Nov 04 21:59:09 arch systemd[1]: Failed to load default target: No such file or directory
    Nov 04 21:59:09 arch systemd[1]: Trying to load rescue target...
    Nov 04 21:59:09 arch systemd[1]: Starting Encrypted Volumes.
    Nov 04 21:59:09 arch systemd[1]: Reached target Encrypted Volumes.
    Nov 04 21:59:09 arch systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Nov 04 21:59:09 arch systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Nov 04 21:59:09 arch systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Nov 04 21:59:09 arch systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Nov 04 21:59:09 arch systemd[1]: Starting Journal Socket.
    Nov 04 21:59:09 arch systemd[1]: Listening on Journal Socket.
    Nov 04 21:59:09 arch systemd[1]: Starting Setup Virtual Console...
    Nov 04 21:59:09 arch systemd[1]: Starting Apply Kernel Variables...
    Nov 04 21:59:09 arch systemd[1]: Started Set Up Additional Binary Formats.
    Nov 04 21:59:09 arch systemd[1]: Started Load Kernel Modules.
    Nov 04 21:59:09 arch systemd[1]: Mounted FUSE Control File System.
    Nov 04 21:59:09 arch systemd[1]: Mounting POSIX Message Queue File System...
    Nov 04 21:59:09 arch systemd[1]: Mounting Huge Pages File System...
    Nov 04 21:59:09 arch systemd[1]: Mounting Configuration File System...
    Nov 04 21:59:09 arch systemd[1]: Starting Journal Service...
    Nov 04 21:59:09 arch systemd[1]: Started Journal Service.
    Nov 04 21:59:09 arch systemd-journal[120]: Journal started
    -- Subject: The Journal has been started
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- The system journal process has been starting up, opened the journal
    -- files for writing and is now ready to process requests.
    Nov 04 21:59:09 arch systemd[1]: Starting Create list of required static device nodes for the current kernel...
    -- Subject: Unit kmod-static-nodes.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit kmod-static-nodes.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Kernel Socket.
    -- Subject: Unit systemd-udevd-kernel.socket has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-kernel.socket has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Listening on udev Kernel Socket.
    -- Subject: Unit systemd-udevd-kernel.socket has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-kernel.socket has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Control Socket.
    -- Subject: Unit systemd-udevd-control.socket has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-control.socket has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Listening on udev Control Socket.
    -- Subject: Unit systemd-udevd-control.socket has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-control.socket has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Coldplug all Devices...
    -- Subject: Unit systemd-udev-trigger.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udev-trigger.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Mounting Debug File System...
    -- Subject: Unit sys-kernel-debug.mount has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-debug.mount has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-sda4.device...
    -- Subject: Unit dev-sda4.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-sda4.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device...
    -- Subject: Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Mounting Temporary Directory...
    -- Subject: Unit tmp.mount has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit tmp.mount has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started File System Check on Root Device.
    -- Subject: Unit systemd-fsck-root.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-fsck-root.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Remount Root and Kernel File Systems...
    -- Subject: Unit systemd-remount-fs.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-remount-fs.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Starting Root Slice.
    -- Subject: Unit -.slice has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit -.slice has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Created slice Root Slice.
    -- Subject: Unit -.slice has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit -.slice has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting System Slice.
    -- Subject: Unit system.slice has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit system.slice has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Created slice System Slice.
    -- Subject: Unit system.slice has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit system.slice has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device...
    -- Subject: Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started Apply Kernel Variables.
    -- Subject: Unit systemd-sysctl.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-sysctl.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted POSIX Message Queue File System.
    -- Subject: Unit dev-mqueue.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-mqueue.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Huge Pages File System.
    -- Subject: Unit dev-hugepages.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-hugepages.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Configuration File System.
    -- Subject: Unit sys-kernel-config.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-config.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Debug File System.
    -- Subject: Unit sys-kernel-debug.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-debug.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Temporary Directory.
    -- Subject: Unit tmp.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit tmp.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started Create list of required static device nodes for the current kernel.
    -- Subject: Unit kmod-static-nodes.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit kmod-static-nodes.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started udev Coldplug all Devices.
    -- Subject: Unit systemd-udev-trigger.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udev-trigger.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Create static device nodes in /dev...
    -- Subject: Unit systemd-tmpfiles-setup-dev.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-tmpfiles-setup-dev.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started Remount Root and Kernel File Systems.
    -- Subject: Unit systemd-remount-fs.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-remount-fs.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Load/Save Random Seed...
    -- Subject: Unit systemd-random-seed.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-random-seed.service has begun starting up.
    Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Nov 04 21:59:09 arch systemd[1]: Started Load/Save Random Seed.
    -- Subject: Unit systemd-random-seed.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-random-seed.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started Create static device nodes in /dev.
    -- Subject: Unit systemd-tmpfiles-setup-dev.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mail

  • Can't set max\min frequencies with CPUpower

    Hi all ! And happy easter to everyone !
    I'm having a problem with CPU Frequency Scaling... I want to set maximum and minimum frequencies according to mi CPU specs, but I'm unable to do this.
    Well, starting from the beginning :
    I've a Samsung NP535U3C laptop, with and AMD A6-4455 APU. I've two boost pstates, in fact TurionPowerControl tells to me 
    [alastor@NP535U3C ~]$ sudo TurionPowerControl -l
    TurionPowerControl 0.44-rc2 (export)
    Turion Power States Optimization and Control - by blackshard
    Main processor is Family 15h (Bulldozer/Interlagos/Valencia) Processor
    Family: 0xf Model: 0x0 Stepping: 0x1
    Extended Family: 0x15 Extended Model: 0x10
    Package Type: 0x0 BrandId: 0x0
    Machine has 1 nodes
    Processor has 1 cores
    Processor has 7 p-states
    Processor has 2 boost states
    Power States table:
    -- Node: 0 Core 0
    core 0 pstate 0 (pb0) - En:1 VID:80 FID:10 DID:0.00 Freq:2600 VCore:0.5500
    core 0 pstate 1 (pb1) - En:1 VID:80 FID:7 DID:0.00 Freq:2300 VCore:0.5500
    core 0 pstate 2 (p0) - En:1 VID:90 FID:5 DID:0.00 Freq:2100 VCore:0.4250
    core 0 pstate 3 (p1) - En:1 VID:96 FID:2 DID:0.00 Freq:1800 VCore:0.3500
    core 0 pstate 4 (p2) - En:1 VID:108 FID:14 DID:1.00 Freq:1500 VCore:0.2000
    core 0 pstate 5 (p3) - En:1 VID:114 FID:10 DID:1.00 Freq:1300 VCore:0.1250
    core 0 pstate 6 (p4) - En:0 VID:116 FID:2 DID:1.00 Freq:900 VCore:0.1000
    --- Node 0:
    Processor Maximum PState: 6
    Processor Startup PState: 4
    Processor Maximum Operating Frequency: 2600 MHz
    Minimum allowed VID: 123 (0.0125V) - Maximum allowed VID 0 (1.5500V)
    Processor AltVID: 58 (0.8250V)
    Done.
    This is confirmed also by cpupower :
    [alastor@NP535U3C ~]$ sudo cpupower frequency-info
    analisi della CPU 0:
    modulo acpi-cpufreq
    CPU che operano alla stessa frequenza hardware: 0 1
    CPU che è necessario siano coordinate dal software: 0
    latenza massima durante la transizione: 4.0 us.
    limiti hardware: 1.30 GHz - 2.10 GHz
    frequenze disponibili: 2.10 GHz, 1.80 GHz, 1.50 GHz, 1.30 GHz
    gestori disponibili: conservative, ondemand, performance
    gestore attuale: la frequenza deve mantenersi tra 1.30 GHz e 2.10 GHz.
    Il gestore "ondemand" può decidere quale velocità usare
    in questo intervallo.
    la frequenza attuale della CPU è 1.50 GHz (ottenuta da una chiamata diretta all'hardware).
    boost state support:
    Supported: yes
    Active: yes
    Boost States: 2
    Total States: 7
    Pstate-Pb0: 2600MHz (boost state)
    Pstate-Pb1: 2300MHz (boost state)
    Pstate-P0: 2100MHz
    Pstate-P1: 1800MHz
    Pstate-P2: 1500MHz
    Pstate-P3: 1300MHz
    Pstate-P4: 900MHz
    So, my question is, why the ondemand governor can switch only between 2.10GHz and 1.3Ghz ? Should'nt switch between 2.6Ghz and 900MHz ?
    I've tried to set lower frequency to 900 MHz whit the command :
    cpupower frequency-set -d 900MHz
    but nothing changed, the lower frequency still remained 1.3Ghz
    I've also tried to set the maximum and minimum frequencies in /etc/default/cpupower :
    # Define CPUs governor
    # valid governors: ondemand, performance, powersave, conservative, userspace.
    governor='ondemand'
    # Limit frequency range
    # Valid suffixes: Hz, kHz (default), MHz, GHz, THz
    min_freq="900MHz"
    max_freq="2600MHz"
    # Specific frequency to be set.
    # Requires userspace governor to be available.
    # Do not set governor field if you use this one.
    #freq=
    # Utilizes cores in one processor package/socket first before processes are
    # scheduled to other processor packages/sockets.
    # See man (1) CPUPOWER-SET for additional details.
    #mc_scheduler=
    # Utilizes thread siblings of one processor core first before processes are
    # scheduled to other cores. See man (1) CPUPOWER-SET for additional details.
    #smp_scheduler=
    # Sets a register on supported Intel processore which allows software to convey
    # its policy for the relative importance of performance versus energy savings to
    # the processor. See man (1) CPUPOWER-SET for additional details.
    #perf_bias=
    # vim:set ts=2 sw=2 ft=sh et:
    but again, nothing canged.
    I've tried ondemand and userspace governors but the situation is the same whit both of them, I always get hardware limits 1.30 - 2.10 GHz.
    I've also tried to set the processor.ignore_ppc=1 boot flag, but it was selfish.
    Someone could help me ? At least to set the lower frequacy to 900MHz so I can save a bit of battery.
    Thank you.

    Hi ! And thank you for your reply !! I'm always on conservative when I'm on battery to save some power. At this point I think I should report the problem to AMD. However here is my /proc/cpuinfo :
    [alastor@NP535U3C ~]$ cat /proc/cpuinfo
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 21
    model : 16
    model name : AMD A6-4455M APU with Radeon(tm) HD Graphics
    stepping : 1
    microcode : 0x6001119
    cpu MHz : 1300.000
    cache size : 2048 KB
    physical id : 0
    siblings : 2
    core id : 0
    cpu cores : 1
    apicid : 16
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 13
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1
    bogomips : 4193.77
    TLB size : 1536 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 48 bits physical, 48 bits virtual
    power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro
    processor : 1
    vendor_id : AuthenticAMD
    cpu family : 21
    model : 16
    model name : AMD A6-4455M APU with Radeon(tm) HD Graphics
    stepping : 1
    microcode : 0x6001119
    cpu MHz : 1300.000
    cache size : 2048 KB
    physical id : 0
    siblings : 2
    core id : 1
    cpu cores : 1
    apicid : 17
    initial apicid : 1
    fpu : yes
    fpu_exception : yes
    cpuid level : 13
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1
    bogomips : 4193.77
    TLB size : 1536 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 48 bits physical, 48 bits virtual
    power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro

  • Wireless regulatory domain set to GB, even tho BO have been selected

    Hello,
    for some reason something is setting my wireless regulatory domain to GB right after wicd associates my adapter with my access point. I have selected the correct domain in /etc/conf.d/wireless-regdom (everything but my domain has been commented out, I have installed crda) and added wireless-regdom to my DAEMONS line. Does anybody have an idea what is changing it to GB?
    Here's a paste of dmesg showing the problem
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.1.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Dec 22 09:11:48 CET 2011
    [ 0.000000] Command line: root=/dev/disk/by-label/archroot ro 5
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfde0000 (usable)
    [ 0.000000] BIOS-e820: 00000000dfde0000 - 00000000dfee0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee1000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000dfee1000 - 00000000dfef0000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EX58-UD5/EX58-UD5, BIOS F13q 11/12/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CCFFF write-protect
    [ 0.000000] CD000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 2 base 100000000 mask F00000000 write-back
    [ 0.000000] 3 base 1C0000000 mask FC0000000 uncachable
    [ 0.000000] 4 base 1A0000000 mask FE0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xdfde0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000f5c40] f5c40
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfde0000
    [ 0.000000] 0000000000 - 00dfc00000 page 2M
    [ 0.000000] 00dfc00000 - 00dfde0000 page 4k
    [ 0.000000] kernel direct mapping tables up to dfde0000 @ 1fffa000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-00000001a0000000
    [ 0.000000] 0100000000 - 01a0000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 1a0000000 @ dfdd8000-dfde0000
    [ 0.000000] RAMDISK: 37d89000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f7600 00014 (v00 GBT )
    [ 0.000000] ACPI: RSDT 00000000dfee1040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: FACP 00000000dfee10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: DSDT 00000000dfee1180 04A7B (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
    [ 0.000000] ACPI: FACS 00000000dfee0000 00040
    [ 0.000000] ACPI: HPET 00000000dfee5dc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
    [ 0.000000] ACPI: MCFG 00000000dfee5e40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: EUDS 00000000dfee5e80 00470 (v01 GBT 00000000 00000000)
    [ 0.000000] ACPI: TAMG 00000000dfee62f0 00AF2 (v01 GBT GBT B0 5455312E BG?? 53450101)
    [ 0.000000] ACPI: APIC 00000000dfee5c40 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: SSDT 00000000dfee6e00 00CCC (v01 INTEL PPM RCM 80000001 INTL 20061109)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-00000001a0000000
    [ 0.000000] Initmem setup node 0 0000000000000000-00000001a0000000
    [ 0.000000] NODE_DATA [000000019fffb000 - 000000019fffffff]
    [ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199600000-ffff88019f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x001a0000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000dfde0
    [ 0.000000] 0: 0x00100000 -> 0x001a0000
    [ 0.000000] On node 0 totalpages: 1572207
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 896544 pages, LIFO batch:31
    [ 0.000000] Normal zone: 10240 pages used for memmap
    [ 0.000000] Normal zone: 645120 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000dfde0000 - 00000000dfee0000
    [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee1000
    [ 0.000000] PM: Registered nosave memory: 00000000dfee1000 - 00000000dfef0000
    [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
    [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
    [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s80448 r8192 d21952 u131072
    [ 0.000000] pcpu-alloc: s80448 r8192 d21952 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1545578
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-label/archroot ro 5
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 6108484k/6815744k available (4158k kernel code, 526916k absent, 180344k reserved, 5286k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 50331648 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 3499.966 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7002.59 BogoMIPS (lpj=11666553)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000071] Security Framework initialized
    [ 0.000074] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000507] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.001636] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.002093] Mount-cache hash table entries: 256
    [ 0.002338] Initializing cgroup subsys cpuacct
    [ 0.002357] Initializing cgroup subsys memory
    [ 0.002367] Initializing cgroup subsys devices
    [ 0.002368] Initializing cgroup subsys freezer
    [ 0.002370] Initializing cgroup subsys net_cls
    [ 0.002371] Initializing cgroup subsys blkio
    [ 0.002400] CPU: Physical Processor ID: 0
    [ 0.002401] CPU: Processor Core ID: 0
    [ 0.002404] mce: CPU supports 9 MCE banks
    [ 0.002411] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002416] using mwait in idle threads.
    [ 0.003061] ACPI: Core revision 20110623
    [ 0.004974] ftrace: allocating 16320 entries in 65 pages
    [ 0.008188] Switched APIC routing to physical flat.
    [ 0.008491] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.041430] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
    [ 0.146057] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
    [ 0.146061] ... version: 3
    [ 0.146061] ... bit width: 48
    [ 0.146062] ... generic registers: 4
    [ 0.146063] ... value mask: 0000ffffffffffff
    [ 0.146064] ... max period: 000000007fffffff
    [ 0.146065] ... fixed-purpose events: 3
    [ 0.146065] ... event mask: 000000070000000f
    [ 0.166297] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.192636] Booting Node 0, Processors #1
    [ 0.192638] smpboot cpu 1: start_ip = 9a000
    [ 0.305842] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.325715] #2
    [ 0.325716] smpboot cpu 2: start_ip = 9a000
    [ 0.438934] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.458778] #3
    [ 0.458779] smpboot cpu 3: start_ip = 9a000
    [ 0.571996] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.578530] Brought up 4 CPUs
    [ 0.578532] Total of 4 processors activated (28010.90 BogoMIPS).
    [ 0.580114] devtmpfs: initialized
    [ 0.580803] PM: Registering ACPI NVS region at dfee0000 (4096 bytes)
    [ 0.581343] print_constraints: dummy:
    [ 0.581392] NET: Registered protocol family 16
    [ 0.581455] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.581457] ACPI: bus type pci registered
    [ 0.581541] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.581543] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.586719] PCI: Using configuration type 1 for base access
    [ 0.587041] bio: create slab <bio-0> at 0
    [ 0.587110] ACPI: Added _OSI(Module Device)
    [ 0.587111] ACPI: Added _OSI(Processor Device)
    [ 0.587112] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.587113] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.587538] ACPI: EC: Look up EC in DSDT
    [ 0.589316] ACPI Warning: Incorrect checksum in table [TAMG] - 0x50, should be 0x4F (20110623/tbutils-314)
    [ 0.589643] ACPI: Interpreter enabled
    [ 0.589645] ACPI: (supports S0 S3 S4 S5)
    [ 0.589654] ACPI: Using IOAPIC for interrupt routing
    [ 0.591717] ACPI: No dock devices found.
    [ 0.591718] HEST: Table not found.
    [ 0.591720] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.591751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.591811] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.591812] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.591814] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.591815] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.591816] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
    [ 0.591826] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
    [ 0.591861] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
    [ 0.591864] pci 0000:00:00.0: PME# disabled
    [ 0.591882] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
    [ 0.591914] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 0.591916] pci 0000:00:03.0: PME# disabled
    [ 0.591935] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800
    [ 0.591977] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800
    [ 0.592017] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800
    [ 0.592059] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800
    [ 0.592099] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800
    [ 0.592107] pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff]
    [ 0.592137] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
    [ 0.592139] pci 0000:00:13.0: PME# disabled
    [ 0.592150] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
    [ 0.592193] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
    [ 0.592236] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
    [ 0.592279] pci 0000:00:15.0: [8086:342f] type 0 class 0x000800
    [ 0.592321] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [ 0.592355] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
    [ 0.592389] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [ 0.592423] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
    [ 0.592456] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [ 0.592490] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
    [ 0.592531] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [ 0.592548] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
    [ 0.592607] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.592610] pci 0000:00:1a.7: PME# disabled
    [ 0.592628] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [ 0.592639] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
    [ 0.592682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.592684] pci 0000:00:1b.0: PME# disabled
    [ 0.592699] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [ 0.592742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.592744] pci 0000:00:1c.0: PME# disabled
    [ 0.592761] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604
    [ 0.592803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.592806] pci 0000:00:1c.1: PME# disabled
    [ 0.592826] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [ 0.592860] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
    [ 0.592893] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [ 0.592927] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
    [ 0.592961] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [ 0.592994] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
    [ 0.593035] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [ 0.593052] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
    [ 0.593111] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.593114] pci 0000:00:1d.7: PME# disabled
    [ 0.593128] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.593171] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
    [ 0.593239] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
    [ 0.593241] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
    [ 0.593270] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
    [ 0.593282] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
    [ 0.593287] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
    [ 0.593293] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
    [ 0.593299] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
    [ 0.593305] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf50f]
    [ 0.593310] pci 0000:00:1f.2: reg 24: [io 0xf400-0xf40f]
    [ 0.593338] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [ 0.593350] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
    [ 0.593366] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
    [ 0.593390] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
    [ 0.593401] pci 0000:00:1f.5: reg 10: [io 0xf200-0xf207]
    [ 0.593407] pci 0000:00:1f.5: reg 14: [io 0xf100-0xf103]
    [ 0.593413] pci 0000:00:1f.5: reg 18: [io 0xf000-0xf007]
    [ 0.593419] pci 0000:00:1f.5: reg 1c: [io 0xef00-0xef03]
    [ 0.593424] pci 0000:00:1f.5: reg 20: [io 0xee00-0xee0f]
    [ 0.593430] pci 0000:00:1f.5: reg 24: [io 0xed00-0xed0f]
    [ 0.593487] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
    [ 0.593494] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
    [ 0.593502] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.593510] pci 0000:01:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit]
    [ 0.593516] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
    [ 0.593521] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.593549] pci 0000:00:03.0: PCI bridge to [bus 01-01]
    [ 0.593551] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
    [ 0.593553] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
    [ 0.593557] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.593587] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.593638] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
    [ 0.593715] pci 0000:03:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
    [ 0.593752] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.593756] pci 0000:03:00.0: PME# disabled
    [ 0.593780] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
    [ 0.593801] pci 0000:03:00.1: reg 10: [io 0xbf00-0xbf07]
    [ 0.593813] pci 0000:03:00.1: reg 14: [io 0xbe00-0xbe03]
    [ 0.593824] pci 0000:03:00.1: reg 18: [io 0xbd00-0xbd07]
    [ 0.593836] pci 0000:03:00.1: reg 1c: [io 0xbc00-0xbc03]
    [ 0.593847] pci 0000:03:00.1: reg 20: [io 0xbb00-0xbb0f]
    [ 0.593916] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.593918] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 0.593921] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.593948] pci 0000:04:01.0: [1102:0004] type 0 class 0x000401
    [ 0.593962] pci 0000:04:01.0: reg 10: [io 0xcf00-0xcf1f]
    [ 0.594015] pci 0000:04:01.0: supports D1 D2
    [ 0.594027] pci 0000:04:01.1: [1102:7003] type 0 class 0x000980
    [ 0.594040] pci 0000:04:01.1: reg 10: [io 0xce00-0xce07]
    [ 0.594093] pci 0000:04:01.1: supports D1 D2
    [ 0.594105] pci 0000:04:01.2: [1102:4001] type 0 class 0x000c00
    [ 0.594119] pci 0000:04:01.2: reg 10: [mem 0xfbeff000-0xfbeff7ff]
    [ 0.594127] pci 0000:04:01.2: reg 14: [mem 0xfbef8000-0xfbefbfff]
    [ 0.594177] pci 0000:04:01.2: supports D1 D2
    [ 0.594178] pci 0000:04:01.2: PME# supported from D0 D1 D2 D3hot
    [ 0.594181] pci 0000:04:01.2: PME# disabled
    [ 0.594221] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.594224] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
    [ 0.594226] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.594230] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.594232] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.594233] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.594235] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.594236] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
    [ 0.594250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.594335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.594351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    [ 0.594375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.594421] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.594423] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.594424] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.601329] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    [ 0.601355] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [ 0.601380] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.601406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
    [ 0.601431] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [ 0.601456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
    [ 0.601481] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
    [ 0.601506] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [ 0.601562] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.601565] vgaarb: loaded
    [ 0.601565] vgaarb: bridge control possible 0000:01:00.0
    [ 0.601611] PCI: Using ACPI for IRQ routing
    [ 0.602749] PCI: Discovered peer bus 3f
    [ 0.602767] pci 0000:3f:00.0: [8086:2c41] type 0 class 0x000600
    [ 0.602779] pci 0000:3f:00.1: [8086:2c01] type 0 class 0x000600
    [ 0.602792] pci 0000:3f:02.0: [8086:2c10] type 0 class 0x000600
    [ 0.602803] pci 0000:3f:02.1: [8086:2c11] type 0 class 0x000600
    [ 0.602815] pci 0000:3f:03.0: [8086:2c18] type 0 class 0x000600
    [ 0.602826] pci 0000:3f:03.1: [8086:2c19] type 0 class 0x000600
    [ 0.602837] pci 0000:3f:03.4: [8086:2c1c] type 0 class 0x000600
    [ 0.602848] pci 0000:3f:04.0: [8086:2c20] type 0 class 0x000600
    [ 0.602860] pci 0000:3f:04.1: [8086:2c21] type 0 class 0x000600
    [ 0.602871] pci 0000:3f:04.2: [8086:2c22] type 0 class 0x000600
    [ 0.602882] pci 0000:3f:04.3: [8086:2c23] type 0 class 0x000600
    [ 0.602894] pci 0000:3f:05.0: [8086:2c28] type 0 class 0x000600
    [ 0.602904] pci 0000:3f:05.1: [8086:2c29] type 0 class 0x000600
    [ 0.602915] pci 0000:3f:05.2: [8086:2c2a] type 0 class 0x000600
    [ 0.602926] pci 0000:3f:05.3: [8086:2c2b] type 0 class 0x000600
    [ 0.602938] pci 0000:3f:06.0: [8086:2c30] type 0 class 0x000600
    [ 0.602950] pci 0000:3f:06.1: [8086:2c31] type 0 class 0x000600
    [ 0.602961] pci 0000:3f:06.2: [8086:2c32] type 0 class 0x000600
    [ 0.602972] pci 0000:3f:06.3: [8086:2c33] type 0 class 0x000600
    [ 0.603233] PCI: pci_cache_line_size set to 64 bytes
    [ 0.603319] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.603320] reserve RAM buffer: 00000000dfde0000 - 00000000dfffffff
    [ 0.603384] NetLabel: Initializing
    [ 0.603385] NetLabel: domain hash size = 128
    [ 0.603386] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.603393] NetLabel: unlabeled traffic allowed by default
    [ 0.603400] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.603403] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.603406] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.618592] Switching to clocksource hpet
    [ 0.621786] Switched to NOHz mode on CPU #0
    [ 0.621823] pnp: PnP ACPI init
    [ 0.621829] ACPI: bus type pnp registered
    [ 0.621868] pnp 00:00: [bus 00-3f]
    [ 0.621869] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.621870] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.621873] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.621874] Switched to NOHz mode on CPU #1
    [ 0.621875] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.621877] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.621878] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
    [ 0.621894] Switched to NOHz mode on CPU #3
    [ 0.621900] Switched to NOHz mode on CPU #2
    [ 0.621902] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.621940] pnp 00:01: [io 0x0010-0x001f]
    [ 0.621941] pnp 00:01: [io 0x0022-0x003f]
    [ 0.621942] pnp 00:01: [io 0x0044-0x005f]
    [ 0.621943] pnp 00:01: [io 0x0062-0x0063]
    [ 0.621944] pnp 00:01: [io 0x0065-0x006f]
    [ 0.621945] pnp 00:01: [io 0x0074-0x007f]
    [ 0.621946] pnp 00:01: [io 0x0091-0x0093]
    [ 0.621947] pnp 00:01: [io 0x00a2-0x00bf]
    [ 0.621948] pnp 00:01: [io 0x00e0-0x00ef]
    [ 0.621949] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.621950] pnp 00:01: [io 0x0290-0x029f]
    [ 0.621951] pnp 00:01: [io 0x0800-0x087f]
    [ 0.621952] pnp 00:01: [io 0x0290-0x0294]
    [ 0.621957] pnp 00:01: [io 0x0880-0x088f]
    [ 0.621996] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.621998] system 00:01: [io 0x0290-0x029f] has been reserved
    [ 0.621999] system 00:01: [io 0x0800-0x087f] has been reserved
    [ 0.622001] system 00:01: [io 0x0290-0x0294] has been reserved
    [ 0.622002] system 00:01: [io 0x0880-0x088f] has been reserved
    [ 0.622004] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.622010] pnp 00:02: [dma 4]
    [ 0.622011] pnp 00:02: [io 0x0000-0x000f]
    [ 0.622012] pnp 00:02: [io 0x0080-0x0090]
    [ 0.622013] pnp 00:02: [io 0x0094-0x009f]
    [ 0.622014] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.622029] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.622054] pnp 00:03: [irq 0 disabled]
    [ 0.622059] pnp 00:03: [irq 8]
    [ 0.622060] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.622078] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.622092] pnp 00:04: [io 0x0070-0x0073]
    [ 0.622108] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.622112] pnp 00:05: [io 0x0061]
    [ 0.622127] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.622132] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.622135] pnp 00:06: [irq 13]
    [ 0.622152] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.622220] pnp 00:07: [io 0x0400-0x04cf]
    [ 0.622221] pnp 00:07: [io 0x04d2-0x04ff]
    [ 0.622254] system 00:07: [io 0x0400-0x04cf] has been reserved
    [ 0.622255] system 00:07: [io 0x04d2-0x04ff] has been reserved
    [ 0.622257] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.622352] pnp 00:08: [mem 0xf0000000-0xf3ffffff]
    [ 0.622390] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.622392] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.622472] pnp 00:09: [mem 0x000d3000-0x000d3fff]
    [ 0.622473] pnp 00:09: [mem 0x000f0000-0x000f7fff]
    [ 0.622474] pnp 00:09: [mem 0x000f8000-0x000fbfff]
    [ 0.622476] pnp 00:09: [mem 0x000fc000-0x000fffff]
    [ 0.622477] pnp 00:09: [mem 0xdfee0000-0xdfeeffff]
    [ 0.622478] pnp 00:09: [mem 0x00000000-0x0009ffff]
    [ 0.622479] pnp 00:09: [mem 0x00100000-0xdfedffff]
    [ 0.622480] pnp 00:09: [mem 0xdfef0000-0xdfefffff]

    After doing some troubleshooting I have discovered that the GB regdom is set when I connect to my wireless accesspoint with wicd. Wicd uses wpa_supplicant, I have set COUNTRY=BO in wpa_supplicant.conf, but it didnt help. If I dont connect I get to use my wireless adapter with the BO regulatory settings. Its a big mystery, especially considering the fact that I'm not in the GB, havent been there with this computer and I didnt find any config files where this locale was set either. Does anybody have an idea?
    Last edited by wims (2012-01-12 05:40:41)

  • Set Duo core to single?

    I require the ability to run with a single core due to a certain conflict with Duo Core running and need some help on how to do this...if possible.
    MoBo=P6NGM2-L
    Bios v2.2
    CPU:Intel Pentium Dual Core E5200 Processor BX80571E5200 - 2.50GHz, 2MB Cache, 800MHz FSB, Wolfdale, Dual Core, Retail, Socket 775, Processor with Fan.
    I'm told this should be done within the BIOS but can't find that feature.
    I know this takes away from it's ability but I require it to be single core until I can get a new different PC single core setup
    Thanks

    I am not sure I am quite getting the point of doing this, as Single Core Operations usually just run on one Core to begin with and you should be able to restrict that application or service to one Core by simply using the Device Manager.
    You cannot really turn off one of the processor's cores independently.  All you can do is to trick the operating system into believing that there are no two cores.  Usually, you would do that by forcing an uni-core HAL during Windows Installation.  
    Which Windows Version are you using?  If you are using Windows XP, set MPS Table Version to 1.1 in BIOS and see if XP is able to automatically adjust to the changes.  In Vista, there is an advanced Boot Option named "Re-detect HAL" or something like that.
    If you are using XP, have a look here:
    http://support.microsoft.com/?scid=kb%3Ben-us%3B309283&x=&y=
    Your current HAL should be ""ACPI Multiprocessor PC," ACPI APIC MP HAL (Halmacpi.dll)".  Changing the MPS Table Version (MPS = MultiProcessor Specification) from 1.4 to 1.1, should yield the ""ACPI Uniprocessor PC," ACPI APIC UP HAL (Halaacpi.dll)" HAL.  

  • Adding F5-VE cluster into APIC: Status remains as init

    Hi,
    This is my 2nd thread about L4-L7 integration.. the previous one was about the ASAv which I managed to get working thanks to Zachary Seils. 
    I've been trying to integrate a F5 VM cluster into the APIC, but couldn't seem to get it working. The status remains as "init". However, when I add a standalone F5 into APIC, the integration seems to work fine. Could someone offer some insight into why this is happening?
    Basically, what I did was the following:
    1) Set up my 2 F5-VE VMs in HA
    - Mgmt IP of 10.88.88.121 for F5-Pri and 10.88.88.122 for F5-Sec
    - Internal VLAN Self-IP of 10.138.10.4 for F5-Pri and 10.138.10.5 for F5-Sec (floating IP of 10.138.10.3)  - this is also used as the HA VLAN
    - External VLAN Self-IP of 10.138.20.4 for F5-Pri and 10.138.20.5 for F5-Sec (floating IP of 10.138.20.3) 
    2) Under one of the tenants, I added the F5 cluster under the L4-L7 Devices, with the necessary interfaces configured (management, external, internal).
    I've attached the configuration and faults in xml format for reference (you can remove the *.txt extension)
    Was there something that I did wrongly, or missed out?
    Thank you so much for reading.

    The interface parameter configured under the HighAvailability folder should be set to the name of an interface that exists on the BIG-IP.  For example, to use BIG-IP interface 1.3 for HA, you would specify the HighAvailability > Interface parameter as 1_3.  Whatever interface you choose, it should be dedicated to HA between the BIG-IP devices.
    I'd also suggest using a VLAN other than 4094, which 1) you might already have defined as the ACI infra VLAN, and 2) is commonly reserved on some NX-OS platforms.  Pick another VLAN ID that falls outside the VLAN pools managed by the APIC.
    Regards,
    Zach

  • Adding ASAv cluster into APIC: Status remains as init

    Hi,
    I've been trying to integrate an ASAv cluster into the APIC, but couldn't seem to get it working. The status remains as "init". However, when I add a standalone ASAv into APIC, the integration seems to work fine. Could someone offer some insight into why this is happening?
    I've attached an XML file describing the fault.
    Basically, what I did was the following:
    1) Set up my 2 ASAv VMs as active-standby with the following configuration:
    - Mgmt IP of 10.88.88.201 for ASAv-Pri and 10.88.88.202 for ASAv-Sec
    - Failover LAN IP of 192.168.0.1 for ASAv-Pri and 192.168.0.2 for ASAv-Sec
    2) Under one of the tenants, I added the ASAv cluster under the L4-L7 Devices, with the necessary interfaces configured. I also configured the necessary interfaces under Parameters, although I'm not sure if I did it correct. I've attached the configuration in xml format for reference (you can remove the *.txt extension)
    Was there something that I did wrongly, or missed out?
    Thanks for reading!

    It looks like your failover configuration is incomplete.  You need to specify the failover_lan_interface under the LAN Failover Interface folder.  The name used should match the interface_name (failover) you specified under the Failover Interface Configuration.
    See the following screenshot for an example:
    Regards,
    Zach

Maybe you are looking for

  • An alternative to the buggy e2200 Killer Ethernet Driver/Software (GE60)

    After several crashes related to the bad Bigfoot Killer Ethernet software and driver, I decided to dig a little deeper. Most people will be able to tell you that the "Killer Ethernet" is fairy pointless, I didn't buy the laptop for it at any rate. It

  • Urgent!!!  at new - filling table

    Can u tell why inside of " AT NEW / ENDAT" all the contents of internal table are initial? i need them. example, LOOP AT TLZK.    AT NEW BUDAT.    T_RESULT-ERFMG = summa.    MODIFY T_RESULT TRANSPORTING ERFMG WHERE BUDAT = ZBUDAT.     T_RESULT-NPP =

  • Price conditions download problem

    Hi! I have a problem with downloading to CRM price conditions. I have some price objects (DNL_COND_A002, DNL_COND_A003...) in R3AM1 with yellow light. They stuck in queue with SYSFAIL. In SMW01 for specific BDoc I have message: Target table CNCCRMPRS

  • Usage of Activity types under Cost Centre.

    Hi I would like to know the usage of activity types under cost centre. How to do direct and indirect activity type allocation.  Please explain indetail from scratch to finish with necessary t.codes at the earliest. Appreciate your cooperation at the

  • Hidden folders in Explore tab

    Hi, Since upgrading to version 11.1.2.1, all Financial Reports and books that were existing in the Root directory are showing as Hidden when a user logs into Workspace. In order to see the folders/reports under the default directory (Root), we have t