APO Bapi - ERROR - No entry found in transportation indicator table for fol

Hi
Experts .. need help on a APO bapi
Iam being doing BAPI for transportation lane to add new material through the bapi BAPI_TRLSRVAPS_SAVEMULTI
iam passing the following to BAPI
    Logical system
    model
and in tables .
    TRANSPORT_LANE
    TRANSPORT_LANEX
    PROD_PROCUREMENT
    PROD_PROCUREMENTX
    LOCATION_FROM    = '1010'.
    LOCTYPE_LOC_FROM = '1001'.
    LOCATION_TO =   '1101'.
    LOCTYPE_LOC_TO = '1001'.
the above data is common for passing all the four bapi tables and in
addition iam passing
prod-valfr = Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
prod-valto = Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
prod-product = material number.
AFter excuteing bapi iam getting an error
No entry found in transportation indicator table for following objects
the above error occured when passed the given data to bapi table - PROD_PROCUREMENT
if we pass the data to   PROD_PROCUREMENT and   PROD_PROCUREMENTX
then there is no error in table return of bapi but the data is not uploaded in transportation lane.
I will really appreciate if some guide me where iam wrong or some other solution for this .
Regards .
Thanks .

Hi,
I am writing bdc code for uploading changing inspection plan data using qp02 . I saw your post in sdn .I think you have solution .can you tell the solution .
Regards
Nandan.

Similar Messages

Error: Variable not found in variable substitution table

Hi,
I am getting following error in file adapter receiver communication channel.
error:Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: java.text.ParseException: Variable 'file' not found in variable substitution table
<b>variable substitution values:</b>
Variable name: File
reference       :payload:MT_DC_Recr,1,Target,1,Filename,1
file name scheme : %File%.txt
<b>inpu file:</b>
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DC_Send xmlns:ns0="http://urn:psr/ff/DC">
   <Source>
      <Filename>dat1</Filename>
      <Record>
         <Name1>123</Name1>
         <Name2>abc</Name2>
         <Name3>XYZ</Name3>
      </Record>
   </Source>
</ns0:MT_DC_Send>
Regards,
Srini

Hi varun,
This is the error i am getting now..
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: File
what i am trying to get is reading filename from the message payload.
Reg,
Srini

HT1645 I had about 1:40 run time on my video for DVD and chose "professional" as I didn't need to rush. Got Multiplexer Error message. Found no reason or fix for this situation. What am I to do to fix?

This site doesn't seem to get answers. I typed the problem above, then it asks same question before post. What help is that? Needs to be clearer what it wants from me. Others seem to have same issues with iDVD's clarity of information. I have been editing for 12+ years and still can't figure out solutions more than trail and error.

Hi
1:40 - can mean 1 sec 40 frames - or - 1 minute 40 seconds - or - 1 hour 40 minutes
1 hour 40 minutes is 100 minutes and iDVD only cares about duration
• Pro Quality encoding - up to 120 minutes (movie + menu) (menu can be 15 minutes or even more
• Best Performances - up to 60 min. - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) up to 120 min. - slightly lower quality than above
Reg "Multiplex Error" - This is a tough one and can have a lot of reasons. Read on
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Error: "The entry 1111 is missing in table T043S"

Hello All,
While clearing a G\L account the below error was encountered:
"The entry 1111 is missing in table T043S"
1111 is company code,
However when I look at the table T043S, 1111 is there.
Could help me to figure out what might be the other cause of this error?
Thanks in advance!
Jhero

Hello,
In T043S and T043G (OBA3) you need to create two tolerance limits.
one tolerance limit with some name
second tolerance limit without any name (blank)
If you do not create tolerance limit blank then your tolerance is not going to work.
First create tolerance group blank for your company code, then copy that tolerance and give some name for your company code.
Hope it should solve your issue.
Regards,
Ravi

Need urgent help to "error 5". Found a solution, but looking for a savior.

Hey guys.
I'm really a fish out of water here. But I'm in great need of some help. But I really don't know if this is he place to get it (maybe you can point me in the right direction?).
Case:
I have a very important InDesign-file (CS5) that's been toasted. I'm getting the notorious (and rare) "error 5"-message. The file can't open no matter what I do. I've figured out that this error could be because I've been copy pasting big images into the ID-document instead of using Place (silly me). I didn't make a backup (stupid me).
I've heard that Markzware have made an extension program for Quark Express 8 (which i have just downloaded in trial) called ID2Q that makes Quark open ID-files. Even files that have the error 5. My problem is now this: There's no trial version availible of ID2Q and since I'm a student with empty pockets I can't afford to by the software for the aprox. 200$.
Therefor I'm looking for someone that might have the software lying around and would be willing to get my file (I've put it up on a ftp-server) change it into a quark-file and return to me. I should then be able to open it in ID and save it again as .indd - at least that's what i read around the web is my ONLY solution.
Looong post, I know. Sorry. Do ANY of you where to get this kind of help?
Thanx.
Roald from Barcelona

Anyone offering that would be in violation of the EULA.
Your best bet is contact Markzware to see what they can arrange for you.
Bob

No entry found in table SMOFQFIND for BDoc type SI_CONTRACT

Hi Gurus,
I try to do a request dowload for SI_CONTRACT object.
When execute and monitor my request objects the status is OK.
Then, I check the BDocs Message Trace and I see the following error
"No entry found in table SMOFQFIND for BDoc type SI_CONTRACT - Queue name used: CRI_SI_CONTRACT (see note 677800 for further info"
Does anyone know how to resolve this issue?
Thanks,
M@le

Hi Brian,
There was leading 0 for the contract # in the request detail, however this message is still in the BDoc message trace. The BDoc was posted successfully. I checked the table SMOFQFIND and could not find the entry for BDoc type SI_CONTRACT.
There are records for SI_CONNOBJ and SI_POD which are all delivered by SAP. I think we just need to maintain SI_CONTRACT in this table to get rid of this message. Just I do not know what exact to maintain for SI_CONTRACT.
Could you help to check standard SAP environment to see what is the detail for SI_CONTRACT in table SMOFQFIND?
Thanks,
ZJKong

No entry found in it_accposnr for posnr 0000000734

Dear All,
While going for running assessment cycle through KSU5, we are getting dump as a part of runtime error. Below is the message getting as a part of Error :
No entry found in it_accposnr for posnr 0000000734
Pls let me know abount this error and corrective action to be taken.
Thanks in advance.
Thanks & Regards,
Taral Patel

Hi,
check SAPNET note 833916 and the related notes.
Best regards, Christian

No entry found in table TTXD Calculation procedure with TAXCR

Hello,
Transaction FB01 F-02 and is sending me the following error, "No entry found in table TTXD Calculation procedure with TAXCR Message no. TAX_TXJCD106" requires me to turn jurisdiction code.
What I can do to avoid this problem?
Regards,

Hello,
You need to make sure the basic configuration is in place first, because I saw in my plain SAP environment, Costa Rica doesn't have a tax procedure assigned. I'm not familiar with Tax in CR as well. However, general rule of thumb for tax posting:
1. SPRO general settings - Set countries - Define countries in my SAP Systems
Assign the tax procedure TAXCR in country CR
2. SPRO FI global settings (New) - tax on sales/purchases - Basic settings - assign country to calc procedure
3. Define Tax Jurisdictions - TAXCR
4. Then Specify structure for tax jurisidiction code for TAXCR (This is the config content for table TTXD)
Regards,
WH

Inventory Revaluation Error : This entry already exists in the foll.table

Dear community members,
For Inventory Revaluation, we have used Primary Series for fiscal
year2008-2009( April2008 -March2009) and total number of documents
posted last fiscal yr are 43(Primary 1 to Primary 43)
Starting Fiscal year 2009-2010(April2009-March2010), we havedefined
series 09-10 (First Number 1) and assigned it to current fiscal year
(Period Indicator 09-10), but when we are trying to post first
Inventory Revaluation documnet for fiscal year 09-10 (Series 09-
10,documnet number 1) , system gives an error "This entry already
exists in following table(OMRV)
Please provide the solution ASAP
Regards,
Mukesh Agrawal

Hi,
You can check the similar settings in the Demo database and if the issue is not reproduced, it can be a database corruption.
Probably, you need to log a support Ticket to SAP in order to get your issue investigated.
Kind Regards,
Jitin
SAP Business One Forum Team

Error massege m7000 "Entry 7030000144 00001 not in table XACCOUNTING_CR"

Hi Experts,
I created a service PO with one line item and i want to post service entry sheet with multiple account for same PO, when i am trying to post service entry sheet that time i am facing below error.
Entry 7030000144 00001 not in table XACCOUNTING_CR (system error)
Message no. M7000
Diagnosis
Internal error.
Procedure
Inform the person responsible for programming or your system administrator.
pl. guide me how can i resolve this issue.
Regards,
AM

Hi,
Consult with your BASIS person make necessary changes as instructed in SAP note 1386249 "MAA: Entry is not in table XACCOUNTING (system error)"
The reason is only seeing cannot be implemented is not enough so you need to ask your BASIS guy
as the note clearly says
Solution
The corrections are delivered with the relevant Support Packages.
If you require these corrections in advance,
correct the source text in accordance with the correction instructions.
In addition, you have to add missing entries to the table EKBE_MA using the attached
correction report.
Links to Support Packages
Software Component .....Release........... Package Name
SAP Application................. 604................ SAPKH60406

The entry AGX is missing in table T030B

Hi all,
When i create new record in FB70, with SGL Ind Z, there is an error: The entry AGX is missing in table T030B.
How to fix this issue?
Thanks,
Quang,

Hi,
Please maintain values for AGX at transaction code OBXW. You need to maintain posting key for Customer item with special G/L indicator at AGX.
Path for transaction at SPRO:-
Financial Accounting ---> Accounts Receivable and Accounts Payable ---> Business Transactions ---> Outgoing Invoices/Credit Memos ---> Outgoing Invoices/Credit Memos - Enjoy ---> Define Posting Key for Outgoing Invoices/Credit Memos
Regards,
Anand Raichura
Edited by: Anand Raichura on May 14, 2010 11:55 AM

The entry T017 is misssing in Table T052,Message No.F5100

Hi Experts,
While Posting Entry useing T-code-F-02 i'm getting below error
The entry T017 is missing in Table T052 and message No . F5100.
What could be the reason?
Kindly give valuable input.
Shriram.

Hi,
Once in production whether that payment termis available or not if it is there ,
Then change message control to warning & proceed.spro-- cross component application --Bankdirectory there you can change
regards,
Santosh kumar
Edited by: santosh kumar on Oct 22, 2009 1:25 PM

Getting error "SQL error in the database when accessing a table."

Hi All,
We are getting Dump Error SQL error in the database when accessing a table for the batch job EISSD/REQUISITION 14 / which includes program AQ20FD==========A2============. Please reply. The Dump error details are as follows
Short text
    SQL error in the database when accessing a table.
How to correct the error
    Database error text........: "ORA-01555: snapshot too old: rollback segment
     number 21 with name "_SYSSMU21$" too small"
    Internal call code.........: "[RSQL/FTCH/VBRK ]"
    Please check the entries in the system log (Transaction SM21).
Thanks
Padmakar Kudtarkar
Edited by: Rob Burbank on May 19, 2011 9:38 AM

The query where we are getting error in Standard program AQ20FD==========A2============ for Job
EISSD/REQUISITION 14 / is as follows:
select VBRKBUKRS VBRKFKART VBRKFKDAT VBRKFKTYP VBRKGJAHR VBRKKUNAG VBRKKUNRG VBRKKURRF VBRKVBELN VBRKWAERK VBRP~AUBEL
       VBRPAUPOS VBRPFKIMG VBRPKVGR2 VBRPKZWI1 VBRPMATNR VBRPMWSBP VBRPNETWR VBRPPSTYV VBRPVBELN VBRPVGBEL VBRP~VGPOS
       VBRPVKBUR VBRPVKGRP VBRPVRKME VBRPWAVWR
into (VBRK-BUKRS , VBRK-FKART , VBRK-FKDAT , VBRK-FKTYP , VBRK-GJAHR , VBRK-KUNAG , VBRK-KUNRG , VBRK-KURRF , VBRK-VBELN
     , VBRK-WAERK , VBRP-AUBEL , VBRP-AUPOS , VBRP-FKIMG , VBRP-KVGR2 , VBRP-KZWI1 , VBRP-MATNR , VBRP-MWSBP , VBRP-NETWR
     , VBRP-PSTYV , VBRP-VBELN , VBRP-VGBEL , VBRP-VGPOS , VBRP-VKBUR , VBRP-VKGRP , VBRP-VRKME , VBRP-WAVWR )
from ( VBRK
       inner join VBRP
       on VBRPVBELN = VBRKVBELN )
       where VBRK~BUKRS in SP$00004
         and VBRK~FKDAT in SP$00001
         and VBRK~KUNAG in SP$00002
         and VBRK~VBELN in SP$00006
         and VBRP~MATNR in SP$00003.
%dbacc = %dbacc - 1.
if %dbacc = 0.
    stop.
endif.
check SP$00004.
check SP$00001.
check SP$00002.
check SP$00006.
check SP$00003.
add 1 to %count-VBRK.
%linr-VBRK = '01'.
extract %fg01.
%ext-VBRP01 = 'X'.
    extract %fgwrVBRP01.
endselect.

No entry in key field of table MARC for BAPI_MATERIAL_MAINTAINDATA_RT

Hi Gurus ,
I have a requirment to upload Retail Articles. I am using BAPI_MATERIAL_MAINTAINDATA_RT to create articles for Basic View, Listing View and Sales View.
I got the error:
No entry in key field of table MARC
Message no. MG502
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Please let me know how to fix this.
Edited by: Rob Burbank on Dec 22, 2010 12:38 PM

Thanks a lot Rob Burbank for the hint!
I figured out that though I was passing the Site under MARC, it wasn't getting transfered to the field. I fixed the code.
Thanks for prompt response!

Duplicate entries in REGUH and REGUP table

Dear All
Whenever we make payment in SAP either through FBZ5 or APP or any other payment transactions, SAP updates 2 tables REGUH and REGUP tables.
I believe SAP allows to make full payment for given invoice only once.
We are seeing some duplicate entries in REGUH and REGUP table for the given Payment document and Invoice.
Does anybody faced similar kind of issue
Regards
Madhan D

I have been facing same kind of problem but in REGUP table, in Payment programe I have make cheque formart in smartform and made Z copy of payment program ZRFFOUS_C, I have also not find out the solution yet, it might be the issue of Z programe or SAP. I am using the ECC5.
I have to control this issue during printing cheque and delete duplicate entry. but still REGUP table have the duplicate entry.
if you find some solution please share with me
Regards

APO Bapi - ERROR - No entry found in transportation indicator table for fol

Similar Messages

Maybe you are looking for