No entry found in it_accposnr for posnr 0000000734

Dear All,
While going for running assessment cycle through KSU5, we are getting dump as a part of runtime error. Below is the message getting as a part of Error :
No entry found in it_accposnr for posnr 0000000734
Pls let me know abount this error and corrective action to be taken.
Thanks in advance.
Thanks & Regards,
Taral Patel

Hi,
check SAPNET note 833916 and the related notes.
Best regards, Christian

Similar Messages

No table entries found for specified key

Hi All,
I have developed a program to upload data from flat file with the help of GUI UPLOAD. It is succesfully updating data in my Z-table.
Whenever I tried to view the content of table for specific field, message shows No table entries found for specified key. However if I add * as a suffix, it shows the data & when I directly Execute table it also displays the data.
I have also cross checked the spaces before or after the specific content, no space found.
Only two fields are creating this issue Individually (one of them is key field)
Regards
Mukul Maheshwari

Hi Dear ,
Here i had implemented program go through it you can understand easily.
While creating table give one field as primary as you know that.
tables zdata1.
data it_tab type TABLE OF zdata1 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\E50039\Desktop\data.txt'     ***************File path
   HAS_FIELD_SEPARATOR           = 'X'
TABLES
    DATA_TAB                      = it_tab
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_tab.
zdata1-no1 = it_tab-no1.
zdata1-name = it_tab-name.
zdata1-empid = it_tab-empid.
insert zdata1.
ENDLOOP.
Flat file
1 name1 empid1
2 name2 empid2
note: Give the tabspace between values in flat file.
Edited by: Aditya.G on Oct 12, 2011 10:22 AM

No entry found in table SMOFQFIND for BDoc type SI_CONTRACT

Hi Gurus,
I try to do a request dowload for SI_CONTRACT object.
When execute and monitor my request objects the status is OK.
Then, I check the BDocs Message Trace and I see the following error
"No entry found in table SMOFQFIND for BDoc type SI_CONTRACT - Queue name used: CRI_SI_CONTRACT (see note 677800 for further info"
Does anyone know how to resolve this issue?
Thanks,
M@le

Hi Brian,
There was leading 0 for the contract # in the request detail, however this message is still in the BDoc message trace. The BDoc was posted successfully. I checked the table SMOFQFIND and could not find the entry for BDoc type SI_CONTRACT.
There are records for SI_CONNOBJ and SI_POD which are all delivered by SAP. I think we just need to maintain SI_CONTRACT in this table to get rid of this message. Just I do not know what exact to maintain for SI_CONTRACT.
Could you help to check standard SAP environment to see what is the detail for SI_CONTRACT in table SMOFQFIND?
Thanks,
ZJKong

APO Bapi - ERROR - No entry found in transportation indicator table for fol

Hi
Experts .. need help on a APO bapi
Iam being doing BAPI for transportation lane to add new material through the bapi BAPI_TRLSRVAPS_SAVEMULTI
iam passing the following to BAPI
    Logical system
    model
and in tables .
    TRANSPORT_LANE
    TRANSPORT_LANEX
    PROD_PROCUREMENT
    PROD_PROCUREMENTX
    LOCATION_FROM    = '1010'.
    LOCTYPE_LOC_FROM = '1001'.
    LOCATION_TO =   '1101'.
    LOCTYPE_LOC_TO = '1001'.
the above data is common for passing all the four bapi tables and in
addition iam passing
prod-valfr = Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
prod-valto = Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
prod-product = material number.
AFter excuteing bapi iam getting an error
No entry found in transportation indicator table for following objects
the above error occured when passed the given data to bapi table - PROD_PROCUREMENT
if we pass the data to   PROD_PROCUREMENT and   PROD_PROCUREMENTX
then there is no error in table return of bapi but the data is not uploaded in transportation lane.
I will really appreciate if some guide me where iam wrong or some other solution for this .
Regards .
Thanks .

Hi,
I am writing bdc code for uploading changing inspection plan data using qp02 . I saw your post in sdn .I think you have solution .can you tell the solution .
Regards
Nandan.

Jdev 11g: No credential mapper entry found for password indirection user

Hi,
Ive been trying to deploy an application as described in http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcextservices.htm#ADFFD542
When the application is installed into weblogic, I get the following error:
An error occurred during activation of changes, please see the log for details.
weblogic.application.ModuleException:
java.security.PrivilegedActionException: weblogic.common.ResourceException: java.security.PrivilegedActionException: weblogic.common.ResourceException: No credential mapper entry found for password indirection user=psa_dev for data source psa_dev

Check out What does this message mean? thread

ESS Benifits and payments - form16 - No entry found for application id XSS_

Hi ,
we have deployed ESS 1.0 sp13 and i am getting an error in benifits and payments .
No entry found for application id XSS_HR_IN_F16 at table T7XSS_SER_RFW this was the error prevesoly getting after maintaining the values in ESS (SPRO) GRT assign application id to ABAP calss.
values of XSS_HR_IN_F16 - CL_HRXSS_IN_F16 then i am getting an error as mentioned bleow
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      Fill in all required com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      Fill in all required entry fields                                   , error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:373)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.in.f16.vc.vcf16selection.VcF16Selection.onInit(VcF16Selection.java:237)
     at com.sap.xss.hr.in.f16.vc.vcf16selection.wdp.InternalVcF16Selection.onInit(InternalVcF16Selection.java:235)
     at com.sap.xss.hr.in.f16.vc.vcf16selection.VcF16SelectionInterface.onInit(VcF16SelectionInterface.java:161)
     at com.sap.xss.hr.in.f16.vc.vcf16selection.wdp.InternalVcF16SelectionInterface.onInit(InternalVcF16SelectionInterface.java:144)
     at com.sap.xss.hr.in.f16.vc.vcf16selection.wdp.InternalVcF16SelectionInterface$External.onInit(InternalVcF16SelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException:      Fill in all required entry fields                                   , error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.rep.model.rfwmodel.RfwModel.hrxss_Ser_Rfw_Rfc_Exec_Action(RfwModel.java:184)
     at com.sap.xss.hr.rep.model.rfwmodel.Hrxss_Ser_Rfw_Rfc_Exec_Action_Input.doExecute(Hrxss_Ser_Rfw_Rfc_Exec_Action_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 63 more
Apart from from the above mentioned entry whether we need to maintain any other entries .
Thanks & Regards
Praveen.K.T
Edited by: PRAVEEN K.T on Aug 13, 2008 8:05 AM

Hi Praveen,
Im getting the same error Can you please let me know how did you resolved it.
Thanks,
Santosh

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

Select the filter value display "No Entries Found"

Hi All,
I have a problem with the bex query. Query is built on a multiprovider.
I am using restricted key figure with constant selection checked for the characteristic that is available only in one cube.
Because of this when I right click and select Filter values on the free characteristics from the report, I get (No Entries Found)
If I remove constant selection from the key figure, report works fine.
Can someone help with a solution;
Thanks,
Biju

Assuming your data is coming from only one cube...
Drag 0INFOPROV in your Filter and restrict it with your your Cube
You can find 0INFOPROV in Dimensions under Data package
Hope this helps.

Error in Sales Order idoc - No appropriate entry found in table ADRT

Hello SAP Gurus,
When I am retriggering a sales order idoc I am getting the following error message.
No appropriate entry found in table ADRT
How can I resolve this issue.
Thanks,
Narayan.

Hello Lakshmipati,
I have checked up the customer master. There was no communication method maintained for any of the customers.
But even then the order idoc is triggered to our XI system.
For the one that failed I have maintained the communication method and retriggered again. It had the same failure message.
Any helpful thoughts is highly appreciated.
Thanks & Regards,
Narayan.

No entry found in table TTXD Calculation procedure with TAXCR

Hello,
Transaction FB01 F-02 and is sending me the following error, "No entry found in table TTXD Calculation procedure with TAXCR Message no. TAX_TXJCD106" requires me to turn jurisdiction code.
What I can do to avoid this problem?
Regards,

Hello,
You need to make sure the basic configuration is in place first, because I saw in my plain SAP environment, Costa Rica doesn't have a tax procedure assigned. I'm not familiar with Tax in CR as well. However, general rule of thumb for tax posting:
1. SPRO general settings - Set countries - Define countries in my SAP Systems
Assign the tax procedure TAXCR in country CR
2. SPRO FI global settings (New) - tax on sales/purchases - Basic settings - assign country to calc procedure
3. Define Tax Jurisdictions - TAXCR
4. Then Specify structure for tax jurisidiction code for TAXCR (This is the config content for table TTXD)
Regards,
WH

No entry in table T503 for "D"

Hello Experts,
while trying to hire an employee on the IDES server, the message "No entry in table T503 for (EEgroup) " ... i checked the T503 table (T503K, and V_T503Z via TCode SM30) ... and found my EE groups and subgroups !! (as assigned through IMG) ... but still I get the same error message and i don't know why.
FYI : I was told that the IDES server is not configurable !! that is , I may not find the expected results that i make on IMG (I may create EEgroups and subgroups, assign them, but still I may not find them as expected!!)
Note:
when I choose an employee group (while hiring) and then i try to select EE subgroups, the status bar says that "No Values Found" though i had assigned EEsubgroups to the EEgroups!!
please tell me what is going on, i am really confused !!
Thanks in advance.

Hi,
1. Create the Emp Group if required through SM30 table T501. If not atleast check your EG.
2. Create the ESG if required thorugh SM30 table T503K. If already created check your ESG here.
3. For the combination of your EG and ESG make sure that country 99 (other countries) is ticked in V_T503Z via SM30.
4. Maintain the Employee attributes in V_503_C via SM30
In case if your EG or ESG is 01 then make sure that it is ZERO ONE and not O(letter) ONE.
hope this helps.
Ajay

Bea.jolt.ServiceException: TPENOENT - no entry found

Hi,
I am getting this error.Also find the ULOG contents pasted below.
D:\bea\tuxedo9.1\samples\jolt\ToUpper>java ToUpper
Authentication Level set To :0
Exception caught error no is:6
bea.jolt.ServiceException: TPENOENT - no entry found
at bea.jolt.JoltRemoteService.decodeCALL(JoltRemoteService.java:460)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:345)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:267)
at ToUpper.main(ToUpper.java:39)
I have checked the jrepository file and also the Applet window for the service defination(TOUPPER)but still its not recognizing the service.Is there some configuration thing I have missed out before running JOLT client.
ULOG File Contents
132947.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1197: INFO: Exiting system
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
132956.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1197: "INFO: Exiting system"
132956.GVC3ZA03TESTING!DMADM.5844.5348.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
132959.GVC3ZA03TESTING!BBL.3216.4372.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
133028.GVC3ZA03TESTING!BBL.6140.5124.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
133028.GVC3ZA03TESTING!BBL.6140.5124.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
133028.GVC3ZA03TESTING!JSL.5608.6088.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133028.GVC3ZA03TESTING!JSL.5608.6088.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!JSL.5608.6088.0: INFO: JOLT Listener version-BEA Jolt 9.1
133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: INFO: JOLT Handler version-BEA Jolt 9.1
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: LIBTUX_CAT:262: INFO: Standard main starting
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Current version: BEA Jolt 9.1
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
133029.GVC3ZA03TESTING!WSL.3292.4892.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSL.3292.4892.0: LIBTUX_CAT:262: INFO: Standard main starting
133029.GVC3ZA03TESTING!WSH.2568.3772.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSH.2568.3772.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
133029.GVC3ZA03TESTING!WSH.5764.3836.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSH.5764.3836.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
133242.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
133359.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
133456.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid32(ACCOUNT_ID) failed for INQUIRY: LIBFML_CAT:8: ERROR: Unknown field name. Maybe FIELDTBLS32 is not set properly.
133612.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
143325.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid(SAMOUNT) failed for DEPOSIT: LIBFML_CAT:11: ERROR: Cannot find or open field table. Maybe FIELDTBLS is not set properly.
144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1197: INFO: Exiting system
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
144116.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1197: "INFO: Exiting system"
144116.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
144119.GVC3ZA03TESTING!BBL.6140.5124.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
144148.GVC3ZA03TESTING!BBL.4144.4376.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
144148.GVC3ZA03TESTING!BBL.4144.4376.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
144148.GVC3ZA03TESTING!JSL.5072.2444.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JSL.5072.2444.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!JSL.5072.2444.0: INFO: JOLT Listener version-BEA Jolt 9.1
144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: INFO: JOLT Handler version-BEA Jolt 9.1
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Current version: BEA Jolt 9.1
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
144148.GVC3ZA03TESTING!WSL.3040.5488.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSL.3040.5488.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!WSH.5740.2764.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSH.5740.2764.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144148.GVC3ZA03TESTING!WSH.1784.5448.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSH.1784.5448.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144157.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144207.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
144226.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144229.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1197: INFO: Exiting system
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
144518.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1197: "INFO: Exiting system"
144519.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
144522.GVC3ZA03TESTING!BBL.4144.4376.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
144543.GVC3ZA03TESTING!BBL.5440.4548.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
144543.GVC3ZA03TESTING!BBL.5440.4548.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
144543.GVC3ZA03TESTING!JSL.1796.5232.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JSL.1796.5232.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!JSL.1796.5232.0: INFO: JOLT Listener version-BEA Jolt 9.1
144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: INFO: JOLT Handler version-BEA Jolt 9.1
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Current version: BEA Jolt 9.1
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
144543.GVC3ZA03TESTING!WSL.2596.4404.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSL.2596.4404.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!WSH.3508.5136.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSH.3508.5136.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144543.GVC3ZA03TESTING!WSH.4288.5676.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSH.4288.5676.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144548.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144634.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
144734.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"

Hi Ajay,
Please see my response to your other post.
Regards,
Todd Little
BEA Tuxedo Chief Architect

SD Query Install - No Entry Found Problem

Gurus,
I have this weird problem in Bex. I installed around 15 Business Content SD query and transported to the assigned Z package. I was able to view the query and have data populated last week.
But recently when i tried to open a particular sales revenue query it says "No Entry Found". The strange thing is that i am able to see the query in the drill down infoarea list. Moreover i checked the query in RSRT1 and ABLE to run it.
Any idea about what is wrong? Even i tried to reinstall it but the same problem again for a particular query.
Shreya

Hi, if you have transport query just rightnow, then just close the screen and then again open RSRT and execute the query,,,
OR just check the system you are watching for data is proper(i.e. if you see the data in analyzer for PD and in RSRT for DV) or not, (Sometime it may be happend)
Just check it out users are same or not?
Regards,

Idoc is getting posted successfully but no table entries found in but000

Hi Abapers
            IM working on CRM Business partner data Migration using LSMW idoc method with Message Type  CRMXIF_PARTNER_SAVE_M Basic Type  CRMXIF_PARTNER_SAVE_M02
i can see the status as 53 i.e crmxif_partner_save function module got posted successfully i have done debugging also. but when i check in se11 but000 table its says for the specified business partner number no table entries found can any one help what exactly is happening quikly reply would help me to solve the issue.

Hi Madhu,
    I have checked the staus of longtext for that idoc where in i could see this message Function module CRMXIF_PARTNER_SAVE has been called successfully
Message no. BXX086
but when i debug once again the lsmw i could see in subroutine From Transfer_idocs the sy-subrc is getting 4 and one read statement is not fetching values what would be going wrong.
FORM transfer_idocs.
971
972       DATA:
973         l_text(132),
974         l_lines TYPE i,
975         l_idoc_nr_from TYPE i,
976         l_idoc_nr_to TYPE i,
977         l_idoc_nr_from_char(10),
978         l_idoc_nr_to_char(10),
979         l_edkp1 LIKE edkp1,                                     "YOG280800
980         l_edk21 LIKE edk21.                                     "YOG280800
981
982       READ TABLE gt_pack_edi_dc40 INDEX 1.
983       CHECK sy-subrc = 0.                                        (here sy-subrc =4 condtion is failing to proceed further)
984
985     * Senderdaten korrekt? YOG280800
986       l_edkp1-mandt = sy-mandt.                                 "YOG280800
987       l_edkp1-parnum = gt_pack_edi_dc40-sndprn.                 "YOG280800
988       l_edkp1-partyp = gt_pack_edi_dc40-sndprt.                 "YOG280800
989       CALL FUNCTION 'EDI_AGREE_PARTNER_READ'                    "YOG280800
990            EXPORTING                                            "YOG280800
991                 rec_edkp1       = l_edkp1.                      "YOG280800
992       IF sy-subrc <> 0.                                         "YOG280800
993         MESSAGE i810(/sapdmc/lsmw) WITH gt_pack_edi_dc40-sndprn "YOG280800
994                                         gt_pack_edi_dc40-sndprt."YOG280800
995         EXIT.                                                   "YOG280800
996       ENDIF.                                                    "YOG280800
997
998       l_edk21-mandt = sy-mandt.                                 "YOG280800
999       l_edk21-sndprn = gt_pack_edi_dc40-sndprn.                 "YOG280800
l_edk21-sndprt = gt_pack_edi_dc40-sndprt.                 "YOG280800
l_edk21-mestyp = gt_pack_edi_dc40-mestyp.                 "YOG280800
l_edk21-mescod = gt_pack_edi_dc40-mescod.                 "YOG280800
CALL FUNCTION 'EDI_AGREE_IN_MESSTYPE_READ'                "YOG280800
       EXPORTING                                            "YOG280800
            rec_edk21       = l_edk21.                      "YOG280800
IF sy-subrc <> 0.                                         "YOG280800
    MESSAGE i811(/sapdmc/lsmw) WITH gt_pack_edi_dc40-mestyp."YOG280800
    EXIT.                                                   "YOG280800
ENDIF.                                                    "YOG280800
Actionlog-Eintrag am Anfang
IF g_flg_first_time = yes.
    CALL FUNCTION '/SAPDMC/LSM_ACTIONLOG_INSERT'
      EXPORTING
        project         = g_project
        subproj         = g_subproj
        object          = g_object
        stepnr          = '901'
      EXCEPTIONS
        parameter_error = 1
        insert_error    = 2
        OTHERS          = 3.
    g_flg_first_time = no.
ENDIF.
DESCRIBE TABLE gt_pack_edi_dc40 LINES l_lines.
ADD l_lines TO g_cnt_records_transferred.
DESCRIBE TABLE gt_pack_edi_dd40 LINES l_lines.
ADD l_lines TO g_cnt_records_transferred.
l_idoc_nr_from = g_cnt_transactions_transferred -
                   g_cnt_idocs_package + 1.
l_idoc_nr_from_char = l_idoc_nr_from.
l_idoc_nr_to = g_cnt_transactions_transferred.
l_idoc_nr_to_char = l_idoc_nr_to.
l_text = 'IDocs werden übertragen (& bis &) ...'(006).
REPLACE '&' WITH l_idoc_nr_from_char INTO l_text.
REPLACE '&' WITH l_idoc_nr_to_char INTO l_text.
CONDENSE l_text.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = l_text.
CALL FUNCTION 'IDOC_INBOUND_ASYNCHRONOUS'
    TABLES
      idoc_control_rec_40 = gt_pack_edi_dc40
      idoc_data_rec_40    = gt_pack_edi_dd40.
CLEAR:
    g_cnt_idocs_package,
    gt_pack_edi_dc40[],
    gt_pack_edi_dd40[].
ENDFORM.                    "TRANSFER_IDOCS

Error during cumulation, No entry found in the table T54C1

I got the following error message since correcting personal area for retro period
Error text - "Error during cumulation, No entry found in the table T54C1 Key 03 75 K 2008 01"
For a personnel number, there was an incorrect org assignment for the period of May 2009 to June last year.

Go ahead and generate payroll period for that payroll area and verify control record with payday rule. Thats missing. Use the table number mentioned in msg to crack issue.

No entry found in it_accposnr for posnr 0000000734

Similar Messages

Maybe you are looking for