App developers - Errors using Application uploader

Hi Folks.
Any solutions to this problem?
Application failed codesign verification. The signature was invalid, or it was not signed with an Apple submission certificate

Did you find out a solution to this? I am sure I am using the distribution certificate and I cannot get the app to upload.

Similar Messages

COM routine error using application program (return code 40,134)

All,
In Interactive Demand Planning ( /SAPAPO/SDP94 ), when im trying to load data in a planning book ther is an error 'Error while calling COM routines using application program (return code 40,134)
is encountered.
What should I do ?
Regards
Steve

Hello Steve,
Return code 40.134 means a key figure operation tried, via a key figure anchor, to dereference a key figure object that does not exist in the liveCache. This problem is due to master data inconsistency in the application.
You might as well want to open an OSS message in accordance with SAP Note 167280.
Hope this helps,
Raymond

Error using applications ESS

Dear Experts.
I have a problema with applications ESS(Appraisal Document, Travel).
We are usign ECC 6.0 with ehp 6. Our portal is 7.4
For the applications of Personal Information, the system show a screen Blue,
I have created a trace using the t.code ST01 for authorizations, however the log not show problems .
What is a posible cause for this errror?
Thanks-
Regards

Carmen,
In portal 7.4 to see the log here is the path.
Do you have access for NWA??
If yes login to http://fqdn:portno/nwa.
Trouble shooting-->Logs and Traces-->Log Viewer-->Open View-->Develper View
below is the screen shot
Regenerate the error and check what error you are getting here.
And also check the system object connection and the system object permission is setted to the user.
Hope it will help you.
Please let me know if you have any doubt on this..
Regards,
Anil

What app can I use to upload pdf documents that cane read in ibooks?

Previously, with MobileMe, I have uploaded pdf files to iDisk and then opened them in iBooks on my iPad2. Worked great. Moving to iCloud, I can no longer upload to iDisk and must use (?) Pages, which will not open a pdf or allow me to move it to iBooks. What am I doing wrong? I need to open a pdf created on my iMAC in iBooks on my iPad2. What is the best way to get it there?
Thanks -

Drag the file to iTunes on your computer. Sync.

[APP-V] Error launching application

Hello,
I have a problem with software on a computer,
all other software runs, even software works perfectly
on other posts.
When I run "Freemind"
I am "freemind started"
but immediately after I "freemind
stopped."
A quick tour of the logs and I
found this:
An error occurred while opening the
virtual registry (section: 9),
rc: 07B01F0C-0000004A
A search later I saw that we could
analyze the behavior of the software with procmon,
but I don't understand how to analyze
the result too.
thank you

Hello,
That error is harmless - as stated in previous posts;
http://social.technet.microsoft.com/Forums/en-US/a9fbd31b-c07e-4b30-8e6f-4bf5a76d10ae/an-error-occurred-while-opening-the-virtual-registry-section-9-rc-07b01f0c0000004a?forum=mdopappv
I would assume that you have ensured that all prerequisites for Freemind are included in the package (such as JRE)?
Any reason not to post how you created the package and what your client machine looks like in terms of what software is installed?
Nicke Källén | The Knack| Twitter:
@Znackattack

I was hit with Application Uploader error messages, but Apple still confirmed that the app is waiting for review...

Hello, I'm new to this FYI. I recently (tonight) submitted my app using the application uploader. It seemed to go through just fine, but after it was done I was hit with a bunch of error messages from the application uploader. However, I nevertheless recieved a confirmation from Apple saying my app was waiting for review...so does this confirmation mean that the upload was actually successfull? Or do I need to delete the binary and re-submit?

Status is also "waiting for review" along with a yellow circle. the binary details all look ok including the .zip file i uploaded. now that i think about it, maybe the error messages were in response to my second upload. because i thought the first one failed, but now I see the .zip is the proper name.

Error using App Builder and Application Loader

Hello,
we created many App's with the App Builder before and after the release of v27 we tried to update a couple of App's. So we get into the App Builder, changed the version from v26 to v27 (didn't changed anything else!!!) and rebuild the App. Now we want to use the Application Loader to upload the App to iTunes Connect, but everytime we receive this message:
"The binary being analyzed must be an executable: /var/folders/9x/.../..._v27_distribution-viewer.zip/viewer.app/viewer"
We rebuild the app several times, updated the App Builder but nothing works. Does anyone has an idea?
Regards
Sven

Was the app updated from previous version to v27 or was created as a brand new v27 app?
Is this same error happening for any other apps you are trying to submit?
What is the version of application loader you are using to upload the distribution-viewer.zip?
The latest version of application loader should be on is 2.8. If you are not, then upgrade to the latest version and try again. You can download the latest version from https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa

Ridiculous!!! We need a MAC to use Application Loader to upload our apps to the AppStore??

Apparently, Apple has recently changed their appstore upload procedures and now require developers to use their Application Loader software to upload the binary files to appstore - which is only available on a MAC. is there any way a Windows developer and upload an app using a PC?

The change was over ten months ago. Prior to that the first part of the review process would involve checking for incorrect use of private API calls, and so on. Now the Application Loader does a good amount of verifying of the app, and can tell you what's wrong with it, which has to be better than you waiting a couple of weeks to only find that you had something wrong in the file.
Some people are using VM setups on WIndows to run OSX, just to run Application Uploader. See pages like this one:
http://lifehacker.com/5583650/run-mac-os-x-in-virtualbox-on-windows
Or, check amongst all of your colleagues and family, there is a chance that someone within not too bad commuting distance from you uses a Mac.
Another option would be to spend $700 to get one of these:
http://www.apple.com/macmini/
That may seem like a small fortune, but you could easily spend more than that you to get a decent Android tablet to test on.

I try to upload my application using Application Loader

I try to upload my application .ipa using Application Loader then I receive this error :ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have proper segment alignment and should be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."

This application is compiled with ad hoc option.
Another question: i´m using Flash2014 in Windows8.1 Is possible to upload the application, without a mac?

Application Uploader error: Neither CFBundleVersion ['3.2.2.26.86923'] nor CFBundleShort...

I keep getting the following error when trying to upload a new zip file via the Application loader.
Neither CFBundleVersion ['3.2.2.26.86923'] nor CFBundleShortVersionString ['1.0.25'] in the Info.plist match the version of the app set in iTunes Connect ['1.5'].
I haven't changed anything in the DPS App Builder, just using the edit so I can upload a new zip file while making changes to key words, etc. in iTunes connect. I've done this a couple times without encountering this.
A google search of this error message doesn't turn up anything helpful either.
Anyone know what this is?
thanks!
Bruce

Found this thread.
http://forums.adobe.com/message/5516222#5516222
Is this an App Builder bug?
I haven't had this problem at all in previous updates and haven't changed a thing except for keywords and screenshots in the app store.

Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi- Dist Build LLB Image.vi- Dist Build App Image.vi- Build Application.vi

When trying to build an application using labview 7.1 and windows XP, I get the error
Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
I've tried the crtl-shift-run as well as a mass compile and I still get the error.
Any ideas?
Thanks,
Mike

Hopefully this thread, or this KB article might help.
It seems like this could come from a lot of things, but there's suggestions in those which might lead you in the right direction
Message Edited by Day on 09-22-2006 02:07 PM

Error APP-FND-01516 INVALID APPLICATION USERNAME, PASSWORD, OF DATABASE

Hi Guru's,
I've installed 11i - 11.5.9 on 2000 Server.
I'm Facing an Error after initialization of applet.
I'm mentioned the exact error bellow.
APP-FND-01516 INVALID APPLICATION USERNAME, PASSWORD, OF DATABASE
Username : APPLSYSPUB
Password : PUB
Database : PROD
Can any one truble shoot my problem.
Even i'm not able to initialized my Database due to this problem.
I have prepared Some Screan Shots, Like Window Services, Applet initializer, and The exact applet which shows the error. if any one of u provide me your's mail Id I can Send.
Please Trouble shoute this problem.
Thanks
Lav

Hi Sir,
I Followed Up Your instrustion and hear is The Out Put.
D:\> cd d:\oracle\oracle\proddb\9.2.0
D:\> Source the environment file (PROD_edu)
1. D:\> echo %ORACLE_HOME% -> Should point to 'd:\oracle\proddb\9.2.0'
Out Put : D:\oracle\proddb\9.2.0>echo %ORACLE_HOME%
d:\oracle\proddb\9.2.0
2. D:\> echo %ORACLE_SID% -> Should return 'PROD'
Out Put :D:\>echo %ORACLE_SID%
%ORACLE_SID%
D:\>
3. D:\> cd d:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu
Out Put : D:\>cd d:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>
D:\> addlnctl.cmd start PROD
Out Put :D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | NOTES
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | HISTORY
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM +=========================
===============================================+
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ##########################
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM This file is automatically
generated by AutoConfig. It will be read and overwritten.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM If you were instructed to
edit this file, or if you are not able to use the settings
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM created by AutoConfig, ref
er to Metalink document 165195.1 for assistance.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ##########################
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "You are running addlnctl.
cmd"
"You are running addlnctl.cmd"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>date /T
Thu 02/08/2007
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>time /T
1:49p
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF "start" == "" GOTO usage
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF "PROD" == "" GOTO usage
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set control_code=start
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set listener_name=PROD
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF /I "start" == "start" GOTO c
ontrol_ok
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set ORA_ENVFILE="d:\oracle\prod
db\9.2.0\PROD_edu.cmd"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set DB_NAME=PROD
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM setup the environment for
Oracle
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>if exist "d:\oracle\proddb\9.2.
0\PROD_edu.cmd" goto env_ok
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>call "d:\oracle\proddb\9.2.0\PR
OD_edu.cmd"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM $Header: ad8idbnt.env 115.
6 2003/05/19 20:27:58 rcchang ship $
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ==========================
================================================
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM NAME
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM PROD.env
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM DESCRIPTION
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM Setup environment for O
racle 8i RDBMS HOME
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM NOTES
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM HISTORY
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM Created by AutoConfig
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ==========================
================================================
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ##########################
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM This file is automatically
generated by AutoConfig. It will be read and overwritten.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM If you were instructed to
edit this file, or if you are not able to use the settings
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM created by AutoConfig, ref
er to Metalink document 165195.1 for assistance.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ##########################
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set TWO_TASK=
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set ORA_NLS33=
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set LOCAL=PROD
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set ORACLE_SID=
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set ORACLE_HOME=d:\oracle\prodd
b\9.2.0
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF "db920" == "db920" (
set PATH=d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apa
che\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:
\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\
bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86
;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl
\5.00503\bin\MSWin32-x86;D:\oracle_10g\bin;C:\mksnt;C:\WINNT\system32;C:\WINNT;C
:\WINNT\System32\Wbem
set PERL5LIB=d:\oracle\proddb\9.2.0\Apache\perl\5.00503\lib;d:\oracle\proddb\9.
2.0\Apache\perl\site\5.00503\lib
) ELSE (set PATH=d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\
9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin
32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apach
e\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\o
racle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;D:\oracle_10g\bin;C:\mksn
t;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem )
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set LD_LIBRARY_PATH=d:\oracle\p
roddb\9.2.0\lib
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set TNS_ADMIN=d:\oracle\proddb\
9.2.0\network\admin\PROD_edu
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set NLS_LANG=American_America.W
E8ISO8859P1
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_numeric_characters = .,
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_date_format = DD-MON-RR
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_sort = binary
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_language = american
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_territory = america
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "The environment settings
are as follows ..."
"The environment settings are as follows ..."
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " ORACLE_HOME : d:\o
racle\proddb\9.2.0"
" ORACLE_HOME : d:\oracle\proddb\9.2.0"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " ORACLE_SID : "
" ORACLE_SID : "
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " TWO_TASK : "
" TWO_TASK : "
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " PATH : d:\o
racle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00
503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\prodd
b\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1
.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\pr
oddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\
MSWin32-x86;D:\oracle_10g\bin;C:\mksnt;C:\WINNT\system32;C:\WINNT;C:\WINNT\Syste
m32\Wbem"
" PATH : d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\pro
ddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sd
k1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\
proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bi
n\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.
0\Apache\perl\5.00503\bin\MSWin32-x86;D:\oracle_10g\bin;C:\mksnt;C:\WINNT\system
32;C:\WINNT;C:\WINNT\System32\Wbem"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " LD_LIBRARY_PATH : d:\o
racle\proddb\9.2.0\lib"
" LD_LIBRARY_PATH : d:\oracle\proddb\9.2.0\lib"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set logfile="d:\oracle\proddb\9
.2.0\appsutil\log\PROD_edu\addlnctl.txt"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo
ECHO is on.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "The log information will
be written to"
"The log information will be written to"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "\t"d:\oracle\proddb\9.2.0
\appsutil\log\PROD_edu\addlnctl.txt""
"\t"d:\oracle\proddb\9.2.0\appsutil\log\PROD_edu\addlnctl.txt""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo
ECHO is on.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF /I "start" == "start" GOTO s
tartdb
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "Starting listener process
PROD ..."
"Starting listener process PROD ..."
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM first try reload
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>lsnrctl reload PROD
LSNRCTL for 32-bit Windows: Version 9.2.0.3.0 - Production on 08-FEB-2007 13:49:
57
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPROD))
The command completed successfully
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM if reload fails, then try
start
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>if 0 GTR 0 goto no_listener
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "Listener PROD has already
been started."
"Listener PROD has already been started."
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>goto end
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "addlnctl.cmd exiting with
status 0"
"addlnctl.cmd exiting with status 0"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>
Last Step : D:\> addbctl.cmd start
Out Put :
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM *=========================
===============================================+
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | Copyright (c) 2000 Oracl
e Corporation, Redwood Shores, California, USA |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | Al
l rights reserved |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | App
lications Division |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM +=========================
===============================================+
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | FILENAME
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | addbctl.cmd
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | DESCRIPTION
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | Start / Stop database
PROD
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | USAGE
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | addbctl.sh <start | st
op> {immediate | abort | normal}
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | PLATFORM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | NT Generic
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | NOTES
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM | HISTORY
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM |
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM +=========================
===============================================+
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM $Header: addbctl.cmd 115.1
0 2003/03/27 07:27:29 swgopal ship $
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "You are running addbctl.c
md"
"You are running addbctl.cmd"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>date /T
Thu 02/08/2007
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>time /T
1:50p
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF "start" == "" GOTO usage
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set shutdown_mode="normal"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set control_code=start
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF /I "start" == "start" GOTO c
ontrol_ok
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set ORA_ENVFILE="d:\oracle\prod
db\9.2.0\PROD_edu.cmd"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set DB_NAME=PROD
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM setup the environment for
Oracle
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>if exist "d:\oracle\proddb\9.2.
0\PROD_edu.cmd" goto env_ok
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>call "d:\oracle\proddb\9.2.0\PR
OD_edu.cmd"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM $Header: ad8idbnt.env 115.
6 2003/05/19 20:27:58 rcchang ship $
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ==========================
================================================
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM NAME
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM PROD.env
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM DESCRIPTION
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM Setup environment for O
racle 8i RDBMS HOME
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM NOTES
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM HISTORY
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM Created by AutoConfig
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ==========================
================================================
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ##########################
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM This file is automatically
generated by AutoConfig. It will be read and overwritten.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM If you were instructed to
edit this file, or if you are not able to use the settings
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM created by AutoConfig, ref
er to Metalink document 165195.1 for assistance.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM ##########################
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set TWO_TASK=
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set ORA_NLS33=
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set LOCAL=PROD
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set ORACLE_SID=
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set ORACLE_HOME=d:\oracle\prodd
b\9.2.0
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF "db920" == "db920" (
set PATH=d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apa
che\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:
\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\
bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86
;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl
\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\
proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;D:\oracle_10g\bin;C:\mksnt;C:\W
INNT\system32;C:\WINNT;C:\WINNT\System32\Wbem
set PERL5LIB=d:\oracle\proddb\9.2.0\Apache\perl\5.00503\lib;d:\oracle\proddb\9.
2.0\Apache\perl\site\5.00503\lib
) ELSE (set PATH=d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\
9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin
32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apach
e\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\o
racle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bi
n;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;D
:\oracle_10g\bin;C:\mksnt;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem )
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set LD_LIBRARY_PATH=d:\oracle\p
roddb\9.2.0\lib
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set TNS_ADMIN=d:\oracle\proddb\
9.2.0\network\admin\PROD_edu
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set NLS_LANG=American_America.W
E8ISO8859P1
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_numeric_characters = .,
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_date_format = DD-MON-RR
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_sort = binary
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_language = american
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set nls_territory = america
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "The environment settings
are as follows ..."
"The environment settings are as follows ..."
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " ORACLE_HOME : d:\o
racle\proddb\9.2.0"
" ORACLE_HOME : d:\oracle\proddb\9.2.0"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " ORACLE_SID : "
" ORACLE_SID : "
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " TWO_TASK : "
" TWO_TASK : "
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " PATH : d:\o
racle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00
503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\prodd
b\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1
.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\pr
oddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\
MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\
Apache\perl\5.00503\bin\MSWin32-x86;D:\oracle_10g\bin;C:\mksnt;C:\WINNT\system32
;C:\WINNT;C:\WINNT\System32\Wbem"
" PATH : d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\pro
ddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sd
k1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\
proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bi
n\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\bin;d:\oracle\proddb\9.2.
0\Apache\perl\5.00503\bin\MSWin32-x86;d:\oracle\proddb\9.2.0\bin;C:\j2sdk1.4.1\b
in;d:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86;D:\oracle_10g\bin;
C:\mksnt;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo " LD_LIBRARY_PATH : d:\o
racle\proddb\9.2.0\lib"
" LD_LIBRARY_PATH : d:\oracle\proddb\9.2.0\lib"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo ""
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>REM set priv_connect=internal/m
anager@PROD
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set DB_VERSION="db920"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF "db920" == "db817" GOTO db81
7
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>set priv_connect="/ as sysdba"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>GOTO connectstr_ok
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>IF /I "start" == "start" GOTO s
tartdb
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo
ECHO is on.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "Starting the database $DB
_NAME ..."
"Starting the database $DB_NAME ..."
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo
ECHO is on.
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>sqlplus /nolog @d:\oracle\prodd
b\9.2.0\appsutil\scripts\PROD_edu\adstrtdb.sql "/ as sysdba"
SQL*Plus: Release 9.2.0.3.0 - Production on Thu Feb 8 13:50:56 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORA-01081: cannot start already-running ORACLE - shut it down first
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>goto end
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>echo "addbctl.cmd exiting with
status 0"
"addbctl.cmd exiting with status 0"
D:\oracle\proddb\9.2.0\appsutil\scripts\PROD_edu>
Now Tell Me What w'll be the next Step : Applet still showing the same error.
Thanks

Server Error in '/' Application upon logging into Myspace using Firefox

Hi Everybody,
I keep trying to log into myspace from both safari and firefox and everytime I get this message....
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
Anybody have a solution for this? Right about the time this started happening I have not able to send mail. Related? I feel like such a mess right now!!Ha Ha!
Any help would be appreciated!
Jared
G4 I Mac Mac OS X (10.4.9)

Hi again J,
You are welcome for the suggestions. Sorry, it's still a no go .
When you are done with the gym: ) I think you ought to try login into Myspace with Safari using a freshly made "test" account. This will show if this issue is system wide,
• Safari Preferences->Advanced tab, Proxies: check that those are not selected.
• Are you using a third party firewall Net Barrier, or Peer Guardian?
if you are they could be the issue, disable them do a restart & see if that helps.
• Are you using DNS #s in System prefrences-> Network,-> Show: Airport
or Ethernet which ever is the case,
TCP/IP tab DNS Servers: enter DNS #'s look for your ISP's here on this page,
http://www.portforward.com/networking/dns.htm
( I also make sure to add DNS #s in the Airport Admin Utility app, found in Utilities
Or try these
Verizon (Level3) - these are not restricted to Verizon customers
4.2.2.1
4.2.2.2
The site is working for me & other users here, so the issue seems to be with either your username account on your computer or system wide on your computer, try the test account & that should help shed a little light.
Good luck, & please keep us posted.
Eme
p.s I forgot this may help:
Under the Blue Apple ->System Preferences /Accounts/ Login Options,
Click on the padlock, enter your admin password.
use the [+] to create one, for ease you could enter test in all the fields.
The short name will be generated for you.
Log Out from your user name account via the Apple menu at top-left of your screen, log in to the Test account that you created.

Error in Application.Run(DisplayLoginForm) and Remote Authentication in SharePoint Online Using the Client Object Model

Hi guys
I Think that is a simple error, but I don’t have enough knowledge in .NET apps.
I make an console app that use Remote Authentication in SharePoint Online Using the Client Object Model, that a I downloaded from MSDN.
This App run ok.
But when I like to make a Windows From App. This component send me an error in Application.Run(DisplayLoginForm)
This err msg :
An unhandled exception of type 'System.InvalidOperationException' occurred in System.Windows.Forms.dll
Additional information: Starting a second message loop on a single thread is not a valid operation. Use Form.ShowDialog instead.
Is there any way to use a form inside a windows form?
Thank in advance
Ramiro
Ramiro B

Hi,
Based on the error message, please do as following:
1. Check your code logic below:
void btn_Click(object sender, System.EventArgs e)
Thread t = new Thread(StartMyForm);
t.TrySetApartmentState(ApartmentState.STA);
t.Start();
public static void StartMyForm()
Application.Run(new MyForm(..));
2.Try to add the following code line in your code.
Application.Restart();
If the issue still exists, please provide your requirement and code for a further research.
Best Regards
Dennis Guo
TechNet Community Support

Duplicate session error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with CF10

We're getting the "duplicate session" error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with Coldfusion 10 Standard.
faultCode:Server.Processing.DuplicateSessionDetected faultString:'Detected duplicate HTTP-based FlexSessions,
generally due to the remote host disabling session cookies.
Session cookies must be enabled to manage the client connection correctly.' faultDetail:'null'
Have read most of the docs about this error -all to do with LCDS
Notes:
Not using LCDS,
No Remote Calls from loaded Sub-Apps,
No Errors from the Flex Web App which is pretty much identical and calls the same cfcs.
The error does not happen all the time and is hard to reproduce - say 5% of app sessions at a guess.
Could it be a two first time remote calls hitting the server together before a session is set up?
Our remoteObjects are in two places 1) Main Application.mxml and within a class compiled into the main app - can't see how this would be an issue.
I enabled session management for the CFCs in Application.cfc but still occurs. Is this neccessary - it's not in any docs?
Could this be something to do with the app not being shut down - as is typical with mobile users? When they resume use after a day or two surely a new session will be created?
Please advise thank you.

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

App developers - Errors using Application uploader

Similar Messages

Maybe you are looking for