App store and applications not running correctly on the 4GS
I upgraded my iphone last night from the 4G to the 4GS, I downloaded all of the updates and the back up. today my phone is very slow, the APP store will not load, and other applications are running very slow or will not open. I have rebooted my phone, deleted apps such as netflix and face book re downloaded, earlier was able to, now I cannot. Does anyone have any suggestions, wondering why I upgraded my phone??????
See [[Installing a previous version of Firefox]]
If you are going to use Firefox 3.0, you should try the last version 3.0.19 rather than 3.0.1
Similar Messages
-
I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?
Its possible the App is not available in the Canadian store if the link doesn't work for you.
https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8 -
i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu. -
I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store. My Mac Air Book is limited to update up to OS 10.6.8, unaware of updating the new version of Mac Cleanse I bought from App Store, this new version does not support my OS 10.6. How can the App Store provide me with an earlier version of Mc Cleanse?
Thanks,
jersonIt can't. That app is now lost to you.
-
Hi, ive bought recently the pokemon game that was in the app store and therefore approved by apple . The game was proven to be fake. I find that inacceptable from such a big company
Do you have a technical question?
-
App Store and Updates not loading in Mavericks
Hi there,
Upgraded my imac to Mavericks and all was well. Then there were some updates for my Aperture, iPhoto and iMovie (all previously purchased as full copies). Something went wrong to my internet connection during the updates and the app store repeatedly asked for my Id and password, which I entered.
The downloads finally completed and the apps seem to work ok.
The problem arose when i went back to the app store and it would not open the application. The toolbar for the app store appears but the appstore software doesnt. No can not log in to app store to check updates and will not allow to check for updates from the Software Update option at the Apple logo.
Tried to restore from Time Machine but will not all it saying it needs the files for OSX. Whats going on?
How can I restore the appstore, OSX and not lose my data - this is a family Mac and all our photos of our children and family are on it!
Any help really appreciated.
WallsIf you continue to have problems with the App Store you might try this:
1 - enable the Debug menu in App Store:
open the Terminal application.
copy the command below and paste into the Terminal window:
defaults write com.apple.appstore ShowDebugMenu -bool true
followed by Enter.
launch App Store, login.
2 - select the Debug ➙ Reset Application option:
3 - try again.
OT -
App Store and others Not Responding in Mountain Lion
Since updating to Mountain Lion - from what was a clean and fine Lion system - I can no longer access the App Store, the Security and Prvacy tab of System Preferences (and ONLY that panel) plus other native Apple apps fail like trying to edit a contact in Address Book.
All end in a 'Not Responding' and thus a force quit.
Other apps basically work. Mail - for example - works until I try and copy and paste an email address when thr spinning parasol takes over.
So far - for me - Mountain Lion is proving a disaster and I am hoping this is a some simple setting buried deep somewhere that is just not right.
Can anyone give me any clues where to look before I throw my MacBook pro into the fishpond out of sheer frustration! ?Andy,
Sorry this is so long...just trying to help and support your efforts. I for one am not convinced your install was damaged (because of my experience below!) but it COULD be. I think mende1's suggestions were a good start.
Not knowing what MBP model and previous OS you have it's difficult to say at this point exactly WHAT the issue is with your upgrade. I have heard the upgrades to Lion and Mtn Lion from anything previous can be problematic, depending on various things and/or how it is done. But usually, the older the MBP model and OS are (or any other Mac for that matter, assuming it CAN be upgraded of course), the more issues there can be.
However, I CAN tell you that I JUST discovered TWO significant bugs in the SysPrefs on a BRAND NEW MBP 2.6Hz, Mid-2012 I received last week, with pre-installed Mnt Lion 10.8 and NO other non-native software installed yet. And sure enough...I JUST returned from the Apple Store where I was able to reproduce the bugs on ALL their computer models, ALL of which were using the 10.8 OS (...and which I am about to report to Apple, but only AFTER replying here first, as I had intended and wanted to do last night, except that I FIRST needed to confirm if they were reproducible and legit at the store, which they are). So you may have discovered additional new bugs (or not), but obviously you won't know until or unless you do additional testing (ugh - I know!).
I would say your issues are a possible combo of the age of your MBP, the upgrade, and POSSIBLY other bugs in 10.8 that are as yet unknown. Only additional testing and time will tell for sure. At the very least I would back everything up, do a complete wipe via Disk Utility (for good measure) and reinstall 10.8 clean to help rule out possible "upgrade" issues (ie, over a previous OS), then go from there.
I also miss the good ol' DVD days as well and am not a fan of the new install paradigm with much less control over various parameters. Not to mention the fact is REQUIRES an internet connection. But here we are. (What if I'm in the middle of Borneo when my Mac goes down without an internet connection??! LOL...but seriously.)
Regardless, and for what it's worth, here are the two new SysPref bugs I just discovered in 10.8 and was able to confirm at the Apple Store. As far as I know they are as yet unknown and do not appear anywhere else on this forum. Furthermore, the functions described below work perfectly in 10.6.X and 10.7.X OS (I have another Mid-2007 MBP with 10.6.8 and a 2011 iMac running 10.7.4 for comparison).
Bug 1- Desktop OS contextual menu does not function properly under certain circumstances. Right-click on desktop and select Change Desktop Background. If you're lucky the Desktop & Screen Saver dialogue window opens. If it DOES, quit and repeat. The second time it will NOT open - despite the fact SysPrefs actually IS activated (ie, upon the second attempt, assuming it opened the first time and you quit/closed it, the SysPrefs icon bounces in the dock and displays the white orb beneath - indicating it is active - however, the Desktop & Screen Saver dialogue window DOES NOT OPEN/APPEAR). In other words, it is open but HIDDEN (bug no.1).
At this point, repeat the selection above again OR...Command-Tab over to the open but hidden SysPrefs icon and voila - the Desktop & Screen Saver dialogue window finally APPEARS. Now, quit SysPrefs, and repeat the selection above a THIRD time. Again, the SysPrefs icon bounces but nothing appears. Repeat the selection above again OR Command-Tab over to it's icon and voila - the Desktop & Screen Saver dialogue window now APPEARS.
Needless to say, the Desktop & Screen Saver dialogue window should ALWAYS open immediately (using the right-click contextual menu selection process above) the FIRST and every time thereafter. But it doesn't in 10.8. Also note that ONLY THE FIRST TIME this is attempted AFTER Restarting the computer OR logging out/in will the Desktop & Screen Saver dialogue window appear. Thereafter, it will not - as described above.
Bug 2 - Added folders to the Desktop & Screen Saver dialogue window do not stay put. Open the SysPrefs Desktop & Screen Saver dialogue window (opening process doesn't matter) and ADD at least 2-3 other folders to the Folder section below using the + button (regardless of whether or not they contain pictures, for demonstration purposes only). This function obviously allows one to specify NUMEROUS OTHER folders that contain pictures to be used as possible desktop backgrounds, in addition to the default Pictures folder that is there, and the default pics Apple provides above. Now, note the LAST folder that is added to the group of folders (regardless of how many were added) that now appear under Folders. Close/quit SysPrefs. Re-open the Desktop & Screen Savers window again and note that only the LAST folder that was added now resides under Folders and all others, except the defaults, have disappeared (bug no.2).
Not sure if this will be much help Andy but wanted you to know you are not alone and it may not all be you! So much more to say but good luck getting this resolved. It took me forever to figure this out and the full story is so much longer, but I will spare you the boring details. Suffice to say, only trial and error will get you closer to an answer, as frustrating that process can be, but I would start with a clean install and take it from there (despite the transition hassle that route obviously presents - argh!). Hang in there and please let me/us know how it goes. -
App store and Safari not working after Time Machine restore to new hardware.
I just had to install a new hard drive to my mid 2010 imac. I restored with time machine. I cannot find the original OS disc. Upon restoring it appears there is a problem with the webkit framework as Safari, App store, and Skype all freeze upon clicking on them and after bouncing, they never open. Chrome is working. What do I do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I would really like to download apps however this isn't possible as safari, app store and itunes are deleted from my homescreen? Where can I go about installing them to the phone again a.s.a.p??
Check Settings > General > Restrictions on Safari, iTunes, etc.
-
I downloaded the mountain lion from the app store and it downloaded. When i installed the mountain lion it said that the hd disk is broken and cannot be repaired, and the other disk doesnt have enough space! HELP and i cannot return to my desktop with the old sofware so i cant use my computer normaly
This error means that your hard drive is badly corrupt and cannot be repaired by Disk Utility. Since you say you don't have backups, this is very bad news. You may already have lost data irrevocably.
First order of business needs to be backing up whatever you can, but this may be difficult to do if the machine won't start up any more. See step 1 of the following post:
https://discussions.apple.com/message/21614450#21614450
Once you have backed up your data, you can address the other issues. -
i accidentally removed the app store app and the applications app from my iphone and now i cant change any apps or move them around on itunes. is there anyway i can get both apps back onto my phone???
I dont think you did. I have the same issues right now and I cant even add apps to my phone from itunes. The entire applications tab is frozen. I came on to see if this was just me or others too. Check your itunes applications tab when your phone is docked. post if it is a frozen tab.
-
App Store and dock not letting go
Hi all,
Each time that I boot up, the app store appears in the dock even though I remove it each time by dragging and letting go and the "spoof". What do I do if I don't wanna see it in the dock each time?Hi ...
Apps that run on the Mac OS X cannot run on an iOS based device for apps purchased from iTunes Store and vice versa. Two different operating systems. -
I purchased the wrong version of an app. The vendor told me to contact the app store for a refund. How do i so this????
Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View My Account (Store > View My Apple ID on iTunes 11) drop-down menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app, click the arrow to the left of it, click the 'Report a Problem' button :
and then the 'Report a Problem' link on its line :
and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page. -
VMware Player and mouse not behaving correctly with the vmmouse driver
I'm running Arch on VMware Player and having problems with the mouse behavior.
- Arch is updated, 32 -bit
- VMware Player 6.0.1
- Host is Windows 8.1 64-bit
- XFCE 4.10
If I install xf86-input-vmmouse, the following happens:
- If cursor touches the edge of the screen when scrolling a window with the scroll bar, scrolling stops. If I continue pressing the mouse button and moving the mouse (and not touching any edges), the scrolling starts working again after two seconds.
- When opening any new window, hovering and clicking will register only after two seconds. This is very noticeable when opening the application menu and trying to launch any app - first click never works.
Uninstalling the vmmouse driver fixes the above problems. The mouse "feeling" gets very bad though, it seems jumpy and the acceleration is crazy and can't be tweaked to be satisfactory with the mouse settings. With vmmouse the mouse feels otherwise just fine.
Installing or uninstalling Open-VM-Tools doesn't do anything.
I tried this, but it had no effect: https://wiki.archlinux.org/index.php/In … s_expected
Happens both in fullscreen and windowed, scrolling behavior happens every time, hover/click lag is not so predictable (seems to happen 50 % of the time).
Might there be any easy fix for this?Hi Sung, Thanks for your reply.
Leonardo:
If I understand your msg correctly, I'm wondering if
the data model as you described is complete.
You state that you have MaintenanceType, Maintenance,
and MaintenanceOrder, but don't you need
MaintenanceOrderLine?MaintenanceOrderLine is what I'm calling Maintenance. A Maintenace record is used just to link a MaintenanceOrder to a MaintenanceType
>
Otherwise, you say that you removed all Maintenance's
in step 2). How did you form a list of all
Maintenance's in step 4)? How do you form this
list?
was raised due to unique constraint violationAt step 3) I'm using a view object, MaintenanceTypeView, to create a list of checkboxes, one for each MaintenanceType.
At step 4), for each MaintenanceType selected in the form, I'm creating a new Maintenance using:
//All codes of maintenance types, that already have a
//respective maintenance record in the db, have already
//been remove from the maintenancesToInsert list at this
//point
for (Iterator iter = maintenancesToInsert.iterator(); iter.hasNext();) {
MaintenanceViewRow maintenanceRow = (MaintenanceViewRow) maintenanceView.createRow();
maintenanceRow.setMaintenanceTypeCode(Integer.valueOf((String)iter.next()));
maintenanceView.insertRow(maintenanceRow);
>
Sung -
is there some thing wrong with my iPad?
The RC helicopter's directions say its available in the App store for Apple and here it is in the iTunes store:
https://itunes.apple.com/us/app/icess/id558793179?mt=8 (released on 6/19/2013)
How do I get this to show up on my iPad and/or iPod touch app stores so I can then download and install it as needed?
Maybe you are looking for
-
Initial Access to Portal 3.0 failing
I have IAS installed, Apache is running but I can't get into the Portal S/W. I've successfully connected to the DB from sql+ from that Oracle home, so connectivity works. I did run the Portal config assistant as part of the installation with no obvio
-
Mac crashing more and more frequently since Mavericks - Why?
My MacBook Pro has been crashing frequently since Mavericks - just freezing up, no keyboard or mousepad reaction - and it is incompatible with software I rely on, such as older versions of Endnote. Also little things are delayed, such as the file an
-
How can I listen to my vocals while I record in adobe audition 1.5?
I used to be able to just got a new computer had to reinstall.
-
In InDesign CS5 when you move elements they are previewed right away, as opposed to CS4 where you would just see an outline untill you dropped the element (unless you held down the mouse button longer). Is there a way to use the old CS4 behavior? Thi
-
Hi all, i have a problem with BP creation using bapi CRMXIF_PARTNER_SAVE: in a custom bapi, i use CRMXIF_PARTNER_SAVE bapi to create a BP and everything goes well ! but, in following scenario i have a problem: 1. substitute old BP's BUT000-BPEXT valu