App-V 5.0 SP2 (Office Deployment Toolkit) - Unable to create Project and Visio with different package ID

We would like to create 2 App-V packages with the
Office Deployment Tool
- Visio Std 2013
- Project Std 2013.
The App-V packages are created successfully, the problem is that the package-id of both packages is the same.
When we deploy for example, Visio to a client and afterwards Project, Visio gets replaced in App-V by Project.
Is anyone else facing this issue ?

So I wanted to bring everybody up to speed on some changes. You can manage multiple Office packages by generating different PACKAGEGUID attributes (https://technet.microsoft.com/en-us/library/jj219426.aspx?f=255&MSPPError=-2147217396)
using the Office Deployment Toolkit BUT - the following still applies:
Only one Office package can be deployed to a machine at a time.
Only VL and Subscription Pro options are available for packaging via App-V.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”
Steve is there any chance this stance may change, or is there any feedback we can give (we have already followed up with our TAM and have also put in tickets but effectively have not gone anywhere other then to explain what the model of support is)?
To be perfectly honest its a very hard model to support since users are licenses for Visio and Project separately, not to mention the lack of user publishing (targeting) and Office Standard support.
We have put in advisory and problem tickets with MS for months in hopes of using the ODT packages in our non persistent VDI environment but I don't believe it will possible.
In short if we have to separate our images or pools to support the various possibilities we are losing what App-V gains us: on demand (per user) publishing to limit the number of gold images we need.
The loss of Office Standard support also leaves us in a tricky spot, because at the end of the day we have to find a way to support those users.
Not looking to put you on the spot, just hoping there is a way to give effective feedback or discuss how to use the ODT packages in a way that makes life easier, not more restrictive.

Similar Messages

Office 2013 VL Local Install with Project and Visio 2013 App-V

Is it supported to have a local install of Office 2013 and deploy a virtual package for Project and Visio 2013 (created via ODT) using App-V 5.0 SP2?I cannot find any reference in the various support articles.

Hello. Did you manage to get an official statement on this?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or MVPs.
Twitter:
@alexverboon | Blog: Anything About IT

App-V 5.0 SP2 user applications published via SCCM 2012 to VDI workstations with roaming only

Hi,
The environment consists of App-V 5.0 SP2 (KB2956985) user based applications published via SCCM 2012 to Windows 7 VDI snapshotted workstations that are reset at user logoff.
When a user logs on the SCCM 2012 client initiates App-V client package publishing. After a couple of minutes after logon the shortcuts appear and the user can launch their applications.
The issue is that at logoff, even with roaming enabled, the publishing information disappears. This causes the next logon process for that user to repeat, the applications are not available until the SCCM client has completed it's publishing cycle.
Roaming profiles are implemented. %APPDATA% is redirected to a UNC path. The following registry key is set
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\Client\Integration\PreserveUserIntegrationsOnLogin=1
U-EV, global publishing of applications, and AppLocker rules are not an option. Also, I have read this already - http://technet.microsoft.com/en-us/library/dn659478.aspx#BKMK_PE
I do not want to wait for the SCCM client to kick in prior to the user applications being available. What do I need to roam or run to create a seamless transition for the user between sessions?
Eddie.

Hi Tywin (bad username considering the last GoT Episode ;))
If you ask Microsoft, they always recommend using SCCM for deploying App-V packages and reuse your current SCCM infrastructure if that is already in place. Problem is, as you now experience, is that there is some big caveats both in regards to publishing
time and to roaming of settings.
As Nické states I would suggest looking into the Full Infrastructure Model for App-V 5.x, which gives you much better performance in what I call "from no apps" to "being able to click the shortcut" - the add and publishing phase. If you don't have the time/budget/whatever
to start looking into that, you could look into some community tools like App-V Scheduler which is developed specific by Citrix guys to ease the publishing and management in a Citrix world.
Microsoft have a great article about Performance Guidelines, which you have read, but it mostly presumes you work with Full Infrastructure. Have you looked into Steve Thomas' session from TechEd NA? It talks about "implementation trends".
Senior Consultant at Atea Denmark - http://Atea.dk Atea Technical Evangelist for App-V NoLightPeople - http://NoLightPeople.com Access Director - http://www.nolightpeople.com/index.aspx#accessdirector

Planning application deployment error (unable to create schema)

Hi,
I was trying to deploy a planning application and got stuck at the deployment step (the validation wen't through fine). During deployment the job aborts giving the following error : Unable to create Scehma for application. Exiting Application Creation.
Can anyone suggest what could be the issue here. Appreciate the help.
[Sep 8, 2010 2:06:07 PM]: Parsing Application Properties...
[Sep 8, 2010 2:06:08 PM]: Application Configuration Properties...
[Sep 8, 2010 2:06:08 PM]: Parsing Dimensions info...
[Sep 8, 2010 2:06:08 PM]: Creating Application bkpln4...
[Sep 8, 2010 2:06:10 PM]: Error Unable to create Scehma for application. Exiting Application Creation.
StackTrace:
java.lang.IllegalStateException: Unable to create Scehma for application. Exiting Application Creation.
     at com.hyperion.planning.HspManageApplication.createApp(Unknown Source)
     at com.hyperion.planning.appdeploy.HspSaxParsedAppDefinition.deployAppFromXML(Unknown Source)
     at com.hyperion.planning.appdeploy.HspAppDefinition$1.run(Unknown Source)
[Sep 8, 2010 2:06:10 PM]: Error An error occurred while creating the application. Please check log for details. Unable to create Scehma for application. Exiting Application Creation.
java.lang.IllegalStateException: Unable to create Scehma for application. Exiting Application Creation.
     at com.hyperion.planning.HspManageApplication.createApp(Unknown Source)
     at com.hyperion.planning.appdeploy.HspSaxParsedAppDefinition.deployAppFromXML(Unknown Source)
     at com.hyperion.planning.appdeploy.HspAppDefinition$1.run(Unknown Source)

Check if the oracle user schema has sufficient privileges to create the tables it needed, etc. Usually if the Oracle DBA grants Connect and resource it is sufficient or more specifically, they need to ensure the following privileges have been granted on a tablespace to the user/schema that is connecting: create table, create any index, create sequence, create procedure, create session, alter session.
Cheers,
Jasmine.

EPMA Deployment Error - Unable To create

We are trying deploy a Hyperion Planning Application using EPMA and we are getting the following error. The Oracle database being used is version 11gR2 and the user has the create view, session & resource.
Could you please help
[12/09/2012 2:09:16 PM]: Parsing Application Properties...Done
[12/09/2012 2:09:16 PM]: Parsing Dimensions info...Done
[12/09/2012 2:09:16 PM]: Creating Application Sales...[12/09/2012 2:09:19 PM]: Unable to create Scehma for application. Exiting Application Creation.
[12/09/2012 2:09:19 PM]: An error occurred while creating the application. Please check log for details. Unable to create Scehma for application. Exiting Application Creation.
[12/09/2012 2:09:19 PM]: An Exception occurred during Application deployment.: An error occurred while creating the application. Please check log for details.

Hello
I see the Error " Unable to create Scehma for application.Exiting Application Creation". I think the The user does not have the necessary Database privileges.
make sure that the user should be the Database creator and should have other necessary privileges.
Hope this helps
thank you
Regards,
Mahe

Standalone Project/Visio 2013 package using Office Deployment Toolkit?

Hello all,
As per the title, is it possible to use ODT to produce standalone Project/Visio 2013 packages without Office in there? I've tried it couple of times now but it will always ended up having the rest of the office suite in there.
Here's an example of the configuration.xml used:
<Configuration>
<Add SourcePath="C:\Temp\" OfficeClientEdition="32" >
    <Product ID="ProjectProVolume">
      <Language ID="en-us" />
    </Product>
</Add>
<Display Level="None" AcceptEULA="TRUE" />
<Logging Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
Any ideas? I've tried using the Sequencer to sequence Visio by itself but everytime it launches, the wizards will run on every launch even though I've already ran them once.
Thanks in advance!

No. You can restrict the application using the XML configuration.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

Deployed OS unable to use mouse and keyboard?

I have an really odd issue,
Since a few days I have an really odd issue, everytime I deploy an Image via MDT to a certain server type I am unable to move the mouse or use the keyboard. I can control it in the bios etc, but as soon as windows boots I lose control over the mouse and
keyboard. I recreated an image on a different server, put that back and the same thing happened. I deploy the images via WDS and it works fine there. Even after the OS is installed I can boot into PXE and I can control the mouse
When I create the image everything is fine, but when I deploy it to a different machine it's not able to be controlled.
Has anyone experienced this ever before? Deploying a fresh windows copy works. but I have no clue where and how I can read log files. The servers in question are Dell PowerEdges R210 II by the way.
The OS Deployed = Windows 7 PRO 64 bit
Server = Dell PowerEdge R210
Using MDT 2012 SP2 on Windows Server 2008 R2
Any help would be greatly appreciated!

I'm not sure I totally follow what's going on above.
I have never had keyboard/mouse driver problems with MDT, sorry.
Can you walk up to the server an plug in a USB Keyboard? The OS should detect the new device and install the driver right then and there. If not, you may have a corrupt driver subsystem. I would also blame the KVM if you have one.
Keith Garner - keithga.wordpress.com

Thoughts & opinions on delivering numerous large apps to RDS/XenApp environment via app-V 5.0 Sp2

So I am trying to convince the customer on the benefits of deploying app-v packages across all RDS servers rather than multiple silo's of apps.
They rightly have concerns about the performance as they have quite a few large applications that are up to 1.5Gb each, plus Office 2013 is itself 1Gb if you include Project and Visio in the download package.
Given the previous performance problems prior to v5 SP2 and the dreadful windows zip decompression performance, what are peoples thoughts around this in a RDS environment with sharedcontentmode enabled?
From my knowledge to date there could be up to 10+Gb worth of *.appv application files by the time most apps are packaged?
To deliver 10+Gb of apps to each server is also not efficient and is a significant increase in storage space requirements across upto 80 RDS servers (unfortunately they do not have de-dupe on the SAN). Plus this is not Microsoft best practise on RDS solutions
as far as I am aware...
Thoughts anyone or examples of how you may have approached such scenarios in the past?

Hi,
you're right, the SCS mode is intent for RDS environments, wheras originally VDI implementations were MS' focus ('There are people using desktop apps on a server OS? D'oh!' ;-) )
AFAIK there are no public benchmarks out yet. I know the guys from www.projectvrc.com are working on one (and I know they are going to present some results during the European App-V User Group).So, let's see if we can start an educated conversation about
SCS here:
Almost nothing (except pointers) is locally stored on the client side. If an application request a file, the required 'bits' get downloaded from the central CS. Windows file system cache will, well, cache those bits in RAM (or maybe even page file). If the
file system cache is full, 'old' bits are drained and the new ones are loaded. If again 'old' bits are required, they have to be re-loaded from the central location.
In a VDI environment, this is not much of an issue. A user usually works with just a small set of apps, so s/he might be good with a very few GB of file system cache.
On an RDS server, namely a Special App Server, the situation is different. Many users are working will lots of applications, and because we'd like to avoid silos, basically every app can be launched on any server. So two users work on two different servers
with, let's say a 3D Application that loads a lod of libraries before launch. And then accidentially a user for Visual Studio hits the same server, purging some of the 3D-bits out of the file system cache.
If your RDS servers are physical machines with lots of RAM: no problem. But if you use virtual RDS servres with just 4 or 8 GB RAM, you could run into trouble (and I personally think that file-caching resources can't be Memory-de-doub'ed well). So, you may
create Silos...
Again, reality might not be as bad as I think of it, but as stated earlier... there is no public info about sizing and perfromance experience.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Steps to upgrade App-V 5.0 SP2 to App-V 5.0 SP3

Hey Pro´s,
I want to update my whole app-v-setup from 5.0 SP2 to 5.0 SP3.
When searching for the upgrade-steps I found this article:
http://technet.microsoft.com/library/dn858700.aspx#BKMK_migrate_to_50SP3
In there you can find a step which is used to check and update registry keys with the ones that you have defined in your base installation - I didn´t set any keys by myself?
Could somebody please tell me what I have to do with those keys?
I´ve already checked my registry and there are lots of keys that miss completly like:
MANAGEMENT_SERVER_MACHINE_USE_LOCAL
or
MANAGEMENT_REMOTE_SERVER_MACHINE_ACCOUNT
But my App-V 5.0 SP2-environment is running fine.
Best regards and thanks in advance
GoProo
/e: Just upgraded the App-V-Mgmt-Server without doing anything before that. It created those listed registry-keys. After that it says it can´t connect to SQL-database and it ain´t working anymore.
Reverted to the snapshot now.
Any help appreciated : )

I came here looking for advice on this as well, but I think I can help you here.
If you look, there are a few things that are probably missing from your configuration that were possibly unnecessary to apply hotfixes, but seem to be necessary to apply the full service pack. For me, I was missing:
HKLM\Software\Microsoft\AppV\Server\Management Database :
All Items. I assumed I didn't need this because the management database is on a different machine.
HKLM\Software\Microsoft\AppV\Server\ManagementService :
MANAGEMENT_ADMINACCOUNT was blank, but it did have the group sid in a key. I used powershell to translate the SID to a name so that I was 100% sure that I used the same exact AD group, then I added the name to this key.
MANAGEMENT_DB_SQL_INSTANCE: I don't need this key because SQL is using the default instance, but it was blank. You may have to adjust this.
MANAGEMENT_DB_SQL_SERVER_NAME: Looks like this key changed somewhere. I have MANAGEMENT_DB_SQL_SERVER and it's set as my SQL server name. Looks like it wants the value under the _NAME key now, so I just copied the SQL server
from the "old" value to this new one.
HKLM\Software\Microsoft\AppV\Server\ReportingDatabase:
All items were missing. Again, I'm assuming this is fine because I'm using the default instance on a remote machine and all default values seem fine to me.
HKLM\Software\Microsoft\AppV\Server\ReportingService:
REPORTING_DB_SQL_INSTANCE: was blank for me, but I have no instance so you might want to check this and add it if necessary.
REPORTING_DB_SQL_SERVER_NAME:
As above, it appears that the value was previously defined in REPORT_DB_SQL_SERVER and now _NAME has been appended. I copied the SQL Server name to this value.
Hope that helps.
I'm stuck at a point where it's telling me that "The database components must be updated to be compatible with the upgraded server. Functionality will be limited until this is completed. Do you want to proceed with the upgrade? [YES] [NO]".
I'm trying to figure out what this means -- will it bring down my database and no App-V 5 apps will work? or is it just saying my App-V Server won't be available... let me know if you get past this part! :)

Error occur when installing iPlanet App server 6.0 SP2

Dear All,
I have problems in installing the iPlanet App server 6.0 SP2 in Solaris.
I choose typical installation and select default settings.
- install iplanet server
- typical install
- install ALL components
However, the following errors occur during the installation:
sh: ./pre_nas_preinst: not found
ERROR. Failure installing iPlanet Application Server Web Connector Component. Do you want to continue [n]?
ERROR. Failure installing iPlanet Application Server Core Server Component. Do you want to continue [n]?
ERROR. ...........
What's the problem with it? Could anyone help....?
Thank youin advance.
Thx & Regards,
Yvonne

I would recommend to use the latest version of application server which is iAS6.5sp1MU2. Try this out and see if you run into any problems. Also please check the release notes available at docs.sun.com to check the compatibility.

Sign up with different apple ID to update an app

I want to update an application from the app store, but when I clicked the "update", i'm asked to sign in with an apple ID that was used to make the first purchase of the app. anyone knows what does that mean?since I never make any purchase with different apple ID. i just changed the country as i moved to The U.S. two weeks ago (the former country/region was Indonesia). Does it cause a problem?thanks a lot

Yeah but I always use the same apple ID since the first time I made a purchase. I just changed my country from Indonesia to United States.
So what should I do? I've tried to change the country to Indonesia but the result was the same. I still could not update any app in my mac.
thanks

App-V 5.0 SP2 and Office 2013 Publishing Problem

Hi
I have a big problem with app-v 5.0 and Office 2013, the thing is that I have published it globally to a RDS servers in my farm and I have 4 different configuration xml's to publsih the package. I'm also using app-locker to prevent the users that are not supposed
to have the package doesn't get it published. That is working fine.
The default configuration xml is to publish the package to the computer with Excel, Word, Outlook, Powerpoint, onenote and Publisher and create shortcuts to All Programs.
I have 1 user configuration xml to a group (group 1) that has the default configuration but including 3 shortcuts to the desktop, Excel, Word and Outlook. I have another user configuration xml to group 2 that has all the application and all the shortcuts in
Office 2013 Pro and 4 shortcuts to the desktop. I have 1 user configuration xml for Excel only and another one for Word only.
This has been working well for 2-3 days but now users are getting error "The application failed to launch. The application belongs to a packages or a connection group that is scheduled to be unpublished. Error code: 0xA7E0E502-00000516".
And the Office 2013 is pending to unpublish globally on all servers even though no one has done anything except log in or log out.
What am I doing wrong, there are no connection groups on the app-v server but there where 2 or 3 long time ago and have been deleted.
Kind Regards
Kristján R. Halldórsson
Best Regards Kristjan R. Halldorsson

I ran the get-appvclientconnectiongroup -all on my servers and there where none listed.
I have also enabled the Virtualization Subsystem debuglog on the client and I'm not finding any error that might relate to this problem.
The thing is I had a group policy enabled that said Enable Global Refresh on Logon = true but I changed that to false and published the package again globally and I'm just waiting now to see if the package goes to unpublish state as it did before.
Best Regards Kristjan R. Halldorsson

Sequencing the MS Office 2013 for App-V 5.0 SP2

Dear Frenz,
I'm referring to the following for Sequencing MS Office 2013,
http://support.microsoft.com/kb/2915745/en-us
I got stuck at packaging the Application (\\server\Office2013\setup.exe /packager \\server\Office2013\Customconfig.xml\\server\share\Office2013AppV).
Step 01:So far I have the downloaded and extracted the ODT in
\\Server\office
Step 02:Downloaded the office application in
\\Server\share
Eg: office\data\.cab files are in \\server\share
Step 03:
while packaging the application the below command is not working (its only showing the help options)
\\server\Office2013\setup.exe /packager \\server\Office2013\Customconfig.xml\\server\share\Office2013AppV****************************************************************************************************** Kindly help me to understand, what I missing here.Regards,
Julie

Have you tried using a local path to create the package instead?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

App-V 5.0 SP2 RDS Client with hotfix 2 breaks frequently on Windows 2012R2 with User Profile Disks enabled

Hi All,
I am at my wit's end trying to troubleshoot this, so any help would be greatly appreciated.
We are having serious stability issues with App-V 5.0 SP2 RDS in our environment with User Profile Disks enabled.
We have applied the latest hotfix but the issues persist.
The main problems are:
1. Periodically the client seems to become corrupted and all applications stop working for all users. All applications including the official Microsoft Office 2013 ones - not just our packages.
The symptoms are the same as if I change the App-V Client Service account to run under a user account instead of SYSTEM, so it suggests a file access issue. The log files also hint at this, and one of there errors is similar to this:
The virtual application 'C:\Users\rds.user9\AppData\Local\Microsoft\AppV\Client\Integration\A3EF9C01-C0E9-4AC5-B21F-DB9B1D2F700C\Root\Mindjet\MindManager 14\MindManager.exe' could not be started because the
App-V Subsystem 'Virtual Filesystem' could not be initialized. {error: 0x6740090A-0x20003}
Once this problem occurs the only way I have found to fix it is to either completely remove and reinstall the client, or (perhaps this is the big clue) rename the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\MAV\Configuration\Volumes , unpublish
an application, then republish said application.
I don't even think it matters which application gets published. The point seems to be that this 'Volumes' key gets rewritten.
I am highly suspicious that our issues are caused by User Profile disks in our RDS environment, as when I disable them on our staging collection all of these issues seem to disappear.
I have made sure all of the servers have permissions on the share (folder and share permissions). It doesn't seem to make a difference.
2. Some application fail completely with User Profile Disks enabled. If we switch the setting from "Store all settings and data on the user profile disk" to "Store Only the following folders" there seems to be some improvement,
in that at least one application that fails on the other setting starts to work.
3. We have already set that NTFS 8 dot 3 reg fix some time ago.
SOS!
We have gone live this week (not my call) and this is having disasterous consequences. :(
Thanks in advance,
John

Hi,
Thanks for your response.
I did try this a while ago without success, although it may be worth revisiting with SP2 applied.
I have left this client now.
I left them a Powershell script that deletes HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\MAV\Configuration\Volumes
and triggers an Unpublish/Publish of an application we have deployed to all of the servers.
This seems to work, but a fix would be better than a workaround.
Not really my problem now though - I did my best.
Thanks,
John

App-V 5.0 SP2 sequencing Visio / Project 2013 with setup.exe /packager fails

Hi @all,
unsing the deployment tool this configuration.xml:
<Configuration>
<Add SourcePath="C:\office-appv\source\" OfficeClientEdition="32" >
<Product ID="VisioProVolume">
<Language ID="de-de" />
<Language ID="en-us" />
</Product>
</Add>
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
for Visio / Project VL (sources where downloaded with this configuration.xml as well)
with this blog:
http://blogs.technet.com/b/office_resource_kit/archive/2013/12/02/announcing-app-v-5-0-sp2-support-for-office-2013-volume-licensing-editions.aspx
Packager tells me that the package was created successfully, but no package was created.
When I take a look in the logfile, it Shows me an error:
Timestamp Process TID Area Category EventID Level Message Correlation
02/26/2014 16:46:45.307 INTEGR~1 (0xeac) 0x5030 Click-To-Run aqkhc Medium CmdLine:"C:\Users\bechtle1\AppData\Local\Temp\Microsoft Office 15\ClientX64\integratedoffice.exe" FLATTEN FLATTEN RERUNMODE config ".\configuration.xml" flattenedoutput "c:\office-appv\appv"
02/26/2014 16:46:45.307 INTEGR~1 (0xeac) 0x5030 Click-To-Run Telemetry aqkhd Medium {"SessionID":"2e7c6873-7ef6-4ee4-bc2e-248c237f4bd9","GeoID":"94","Ver":"15.0.4569.1504","Bitness":"64","IntegrityLevel":"0x3000","SecuritySessionId":"5"}
02/26/2014 16:46:45.307 INTEGR~1 (0xeac) 0x5030 Click-To-Run Telemetry aqkhe Medium {"SessionID":"2e7c6873-7ef6-4ee4-bc2e-248c237f4bd9","GeoID":"94","Ver":"15.0.4569.1504","OSVersion":"6.1","SP":"1","ProductType":"3","ProcessorArch":"9","Locale":"1031"}
02/26/2014 16:46:45.307 INTEGR~1 (0xeac) 0x5030 Click-To-Run ap2kl Medium Args::Args - C2RClient IntegratedOffice.exe receives command line {FLATTEN FLATTEN RERUNMODE config ".\configuration.xml" flattenedoutput "c:\office-appv\appv".}
02/26/2014 16:46:45.307 INTEGR~1 (0xeac) 0x5030 Click-To-Run ap2km Unexpected C2RClientCommandArgsFactory::CreateC2RClientCommandArgs - Not supported mode: FLATTEN
02/26/2014 16:46:45.307 INTEGR~1 (0xeac) 0x5030 Click-To-Run ap2ko Unexpected ::wWinMain - Error encountered starting IntegratedOffice.ext with command line FLATTEN FLATTEN RERUNMODE config ".\configuration.xml" flattenedoutput "c:\office-appv\appv". Exception: InvalidArgument (Not supported mode).
02/26/2014 16:46:45.307 INTEGR~1 (0xeac) 0x5030 Logging Liblet aqc99 Medium Logging liblet uninitializing.
Regarding to KB VL is fully supported.
Has anyone the same issue?
Regards,
Bernd.

I 'sequenced' this recently. The Volume License version too. I believe the only difference in what I did was that I didn't set any other languages. If you try with just the below, do you see the same results? Could try and play the process of elimination
game
<Configuration>
<Add OfficeClientEdition="32" >
<Product ID="VisioProVolume">
<Language ID="en-us" />
</Product>
</Add>
</Configuration>
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

App-V 5.0 SP2 (Office Deployment Toolkit) - Unable to create Project and Visio with different package ID

Similar Messages

Maybe you are looking for